Search NASA⌕ Search

SEARCH · Search NASA

Results for “Oxide reducibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Investigation on gate oxide reliability under gate bias screening for commercial SiC planar and trench MOSFETs

This paper evaluates the impact of the fast high gate-voltage screening technique on gate oxide reliability of commercial 1.2 kV 4H-SiC power metal-oxide-semiconductor field-effect transistors (MOSFETs) with planar and trench gate structures. The measurements are conducted on packaged devices with the intent that the results will be applicable to wafer-level screening. The threshold voltage (V th ) of SiC MOSFETs is measured before and after various screening treatments and recovery process. In addition, constant-voltage time-dependent dielectric breakdown (TDDB) measurements are performed on SiC MOSFETs to obtain the intrinsic lifetime of gate oxide. The objective of this study is to determine the optimal screening conditions and improve screening efficiency without degradation of gate oxide reliability, such as V th shift and reduced oxide intrinsic lifetime. Due to the differences in the gate oxidation process and structural design of SiC planar and trench MOSFETs, the two types of devices exhibit different oxide reliability in the screening process. The recommended screening conditions obtained in this paper reveal that SiC trench MOSFETs can accept higher screening voltages compared to SiC planar MOSFETs. Hence, it can be concluded that more efficient screening techniques can be adopted for SiC MOSFETs with thicker gate oxide to meet the requirements of industrial applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Active sulfur cycling in the terrestrial deep subsurface

The deep terrestrial subsurface remains an environment where there is limited understanding of the extant microbial metabolisms. At Olkiluoto, Finland, a deep geological repository is under construction for the final storage of spent nuclear fuel. It is therefore critical to evaluate the potential impact microbial metabolism, including sulfide generation, could have upon the safety of the repository. As such, we investigated a deep groundwater where sulfate is present, but groundwater geochemistry suggests limited microbial sulfate-reducing activity. Examination of the microbial community at the genome-level revealed microorganisms with the metabolic capacity for both oxidative and reductive sulfur transformations. Deltaproteobacteria are shown to have the genetic capacity for sulfate reduction and possibly sulfur disproportionation, while Rhizobiaceae, Rhodocyclaceae, Sideroxydans, and Sulfurimonas oxidize reduced sulfur compounds. Further examination of the proteome confirmed an active sulfur cycle, serving for microbial energy generation and growth. Our results reveal that this sulfide-poor groundwater harbors an active microbial community of sulfate-reducing and sulfide-oxidizing bacteria, together mediating a sulfur cycle that remained undetected by geochemical monitoring alone. The ability of sulfide-oxidizing bacteria to limit the accumulation of sulfide was further demonstrated in groundwater incubations and highlights a potential sink for sulfide that could be beneficial for geological repository safety.

58 GEOSCIENCES↗
DOE OSTI2020

Recent advances in single-atom catalysts and single-atom alloys: opportunities for exploring the uncharted phase space in-between

Single-atom catalysts (SACs) have gained significant world-wide attention for exhibiting distinct reactivity and selectivity for important reactions, while utilizing precious metals at the ultimate limit of efficiency. SACs involving reducible oxide supports are good catalysts for oxidation reactions, and metal-acid site pairs enable Csingle bondC bond formation, but SACs can deactivate by sintering under reducing conditions. On the other hand, single-atom alloys (SAAs) are robust towards sintering and exhibit exceptional catalytic performance for a wide range of reactions under reducing conditions but can deactivate under oxidizing environments. Therefore, there is tremendous opportunity to explore and exploit catalytic reactivity between the SAC and SAA extremes. Furthermore, this paper focuses on recent advances in both fields and highlights prospects for future research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tuning Catalytic Reactivity via Wetting Control through Oxygen Vacancies: Ru Clusters on Anatase TiO 2 and CeO 2 Supports

The shape of supported metal particles regulates their catalytic reactivity and is determined by the degree of wetting between the metal particle and the support surface. Flattened particles that wet support surfaces were reported in various catalytic systems, particularly in the subnanometer size regime. Such consequential metal–support wetting phenomena are poorly understood, and methods to study them on powder catalysts under realistic conditions are lacking. Here, we investigate the size-dependent wetting behaviors of Ru particles on two reducible-oxide supports, anatase TiO 2 (TiO 2 -A) and CeO 2 , under reducing catalytic conditions. X-ray absorption spectroscopy (XAS), low-energy ion scattering (LEIS), and density functional theory (DFT) are combined to determine the shape of Ru particles. Ru particles remain three-dimensional without wetting the TiO 2 -A support within the coverage range studied (0.06–0.98 Ru nm –2 ). In contrast, at low coverages (<0.25 Ru nm –2 ), Ru wets the CeO 2 support to form flat, disordered structures. The higher wettability of CeO 2 than TiO 2 -A is attributed to oxygen vacancies in the near-surface region. The shape difference between small Ru particles or clusters on the two supports leads to drastically contrasting catalytic reactivities in polyolefin hydrogenolysis, despite similar diameters. As a result, this work highlights the implications of metal–support wetting, or cluster shape, on catalytic behaviors of small metal clusters, while establishing the foundation for future systematic studies of such a phenomenon in realistic systems, by delivering a multitechnique methodology and revealing governing fundamental principles.

42 ENGINEERING↗
DOE OSTI2020

CO Oxidation Mechanisms on CoO x -Pt Thin Films

The reaction of CO and O 2 with submonolayer and multilayer CoO x films on Pt(111), to produce CO 2 , was investigated at room temperature in the mTorr pressure regime. Here, using operando ambient pressure X-ray photoelectron spectroscopy and high pressure scanning tunneling microscopy, as well as density functional theory calculations, we found that the presence of oxygen vacancies in partially oxidized CoO x films significantly enhances the CO oxidation activity to form CO 2 upon exposure to mTorr pressures of CO at room temperature. In contrast, CoO films without O-vacancies are much less active for CO 2 formation at RT, and CO only adsorbed in the form of carbonate species that are stable up to 260 °C. On submonolayer CoO x islands, the carbonates form preferentially at island edges, deactivating the edge sites for CO 2 formation, even while the reaction proceeds inside the islands. These results provide a detailed understanding of CO oxidation pathways on systems where noble metals such as Pt interact with reducible oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Modeling surface spin polarization on ceria-supported Pt nanoparticles

In this work, we employ density functional theory simulations to investigate possible spin polarization of CeO 2 -(111) surface and its impact on the interactions between a ceria support and Pt nanoparticles. With a Gaussian type orbital basis, our simulations suggest that the CeO 2 -(111) surface exhibits a robust surface spin polarization due to the internal charge transfer between atomic Ce and O layers. In turn, it can lower the surface oxygen vacancy formation energy and enhance the oxide reducibility. We show that the inclusion of spin polarization can significantly reduce the major activation barrier in the proposed reaction pathway of CO oxidation on ceria-supported Pt nanoparticles. For metal-support interactions, surface spin polarization enhances the bonding between Pt nanoparticles and ceria surface oxygen, while CO adsorption on Pt nanoparticles weakens the interfacial interaction regardless of spin polarization. However, the stable surface spin polarization can only be found in the simulations based on the Gaussian type orbital basis. Furthermore, given the potential importance in the design of future high-performance catalysts, our present study suggests a pressing need to examine the surface ferromagnetism of transition metal oxides in both experiment and theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Uranium nitride (UN) pellets with controllable microstructure and phase – fabrication by spark plasma sintering and their thermal-mechanical and oxidation properties

Dense uranium mononitride (UN) pellets with controlled microstructures and tailored grain size from large-grained to a few microns are synthesized by spark plasma sintering (SPS) combined with high energy ball milling. The impacts of the sintering conditions on fuel microstructure, grain size, physical density, and phase behavior are systematically investigated, and the thermal-mechanical properties and oxidation behavior of the SPS densified UN pellets are characterized. Higher sintering temperatures and longer ball milling durations and thus finer starting UN powders promote sintering and densification, and dense UN pellets above 95% theoretical density can be achieved by SPS at 1873 K for 10 min. UN phase purity is maintained in the SPS-densified pellets sintered at a lower temperature and short duration. A phase heterogeneity with secondary UO 2 or uranium sesquinitride (U 2 N 3 ) occurs for the UN pellets sintered at higher temperatures using finer UN powders. The hardness and fracture toughness of the SPS-densified UN pellets increase with smaller grain sizes and higher densities to 7.9 GPa and 3.5 MPa m 1/2 , respectively. Furthermore, both small (1–2 μm) and large grain-sized (30–50 µm) UN pellets exhibit good thermal conductivity. Dynamic oxidation testing by a thermogravimetric analyzer in air shows that the onset temperature for oxidation varies with microstructure and phase heterogeneity of the SPS densified UN pellets. Particularly, the smaller-grained (micron-sized) UN pellets containing uranium oxides and U 2 N 3 display lower weight gain and significantly-reduced oxidation kinetics, and full oxidation completes at a temperature above 1173 K when tested with a ramp rate of 10 K/min.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Contribution of Microorganisms with the Clade II Nitrous Oxide Reductase to Suppression of Surface Emissions of Nitrous Oxide

The sources and sinks of nitrous oxide, as control emissions to the atmosphere, are generally poorly constrained for most environmental systems. Initial depth-resolved analysis of nitrous oxide flux from observation wells and the proximal surface within a nitrate contaminated aquifer system revealed high subsurface production but little escape from the surface. Further, to better understand the environmental controls of production and emission at this site, we used a combination of isotopic, geochemical, and molecular analyses to show that chemodenitrification and bacterial denitrification are major sources of nitrous oxide in this subsurface, where low DO, low pH, and high nitrate are correlated with significant nitrous oxide production. Depth-resolved metagenomes showed that consumption of nitrous oxide near the surface was correlated with an enrichment of Clade II nitrous oxide reducers, consistent with a growing appreciation of their importance in controlling release of nitrous oxide to the atmosphere. Our work also provides evidence for the reduction of nitrous oxide at a pH of 4, well below the generally accepted limit of pH 5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Oxidation kinetics of biochar from woody and herbaceous biomass

The goal of this study was to determine oxidation kinetics for biochar produced from fast pyrolysis of various biomass feedstocks. In particular, the role of inherent ash content on the oxidation rate was evaluated. Thermogravimetric analysis (TGA) and fluidized bed combustion experiments were used to explore oxidation kinetics of six fast pyrolysis produced biochars with diverse ash content. Here, the reaction rates varied by a factor of three under chemical kinetic-limited conditions, demonstrating inorganic content impacts oxidation rate. Chemical kinetic rate coefficients were proposed as a function of compositional parameters to determine overall fit and impact. Potassium content was found to have a positive correlation, best describing the differences in the oxidation kinetic rate coefficients. Additionally, feedstocks were subjected to a 1 M HCl acid wash mitigating the catalytic activity of the metals. Acid washed biochars had lower oxidation kinetic rates compared to their unwashed counterparts, indicating the removal of catalytically active metals reduced oxidation rate. Gas composition (CO/CO 2 ) was measured during fluidized bed experiments for both acid-washed and unwashed biochars, which varied between the six biochars. Formation of CO 2 was greatly affected by catalytic metals, finding potassium content to correlate well with a higher percentage of CO 2 formation as compared to CO. Comparison of oxidation rates were made between the two experimental apparatuses to measure the effect of attrition on biochar oxidation.

09 BIOMASS FUELS↗
DOE OSTI2023

Effects of Cr/Zircaloy-4 coating qualities for enhanced accident tolerant fuel cladding

Cr-coated zirconium alloys represent a modern approach to enhance cladding safety during accident scenarios. Two high-power impulse magnetron sputtered Cr-coated Zry-4 systems were subjected to simulated loss-of-coolant accident conditions to investigate cladding performance. The first Cr-coating (4.8 µm thick) was deposited onto Zry-4 cladding and exhibited through-thickness cracking while the second Cr-coating (6.8 µm thick) was deposited with improved deposition parameters onto polished Zry-4 and exhibited no cracking. During burst testing, the coating with a higher density of defects failed to consistently reduce oxidation and exhibited similar burst behavior as Zry-4. In contrast, the second Cr-coating reduced ZrO 2 formation through formation of Cr 2 O 3 and displayed enhanced burst temperatures by ~80 °C compared to Zry-4. Utilizing an empirical relation for burst behavior of zirconium alloys, the 6.8 µm Cr/Zry-4 system displayed enhanced burst temperatures equivalent to an effective 0.464 mm increase in Zry-4 wall thickness, highlighting the value of continuous Cr coatings for accident scenarios.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Dynamic Behavior of Platinum Atoms and Clusters in the Native Oxide Layer of Aluminum Nanocrystals

Strong metal–support interactions (SMSIs) are well-known in the field of heterogeneous catalysis to induce the encapsulation of platinum (Pt) group metals by oxide supports through high temperature H 2 reduction. However, demonstrations of SMSI overlayers have largely been limited to reducible oxides, such as TiO 2 and Nb 2 O 5 . In this report we show that the amorphous native surface oxide of plasmonic aluminum nanocrystals (AlNCs) exhibits SMSI-induced encapsulation of Pt following reduction in H 2 in a Pt structure dependent manner. Reductive treatment in H 2 at 300 °C induces the formation of an AlO x SMSI overlayer on Pt clusters, leaving Pt single-atom sites (Ptiso) exposed available for catalysis. The remaining exposed Pt iso species possess a more uniform local coordination environment than has been observed on other forms of Al 2 O 3 , suggesting that the AlO x native oxide of AlNCs presents well-defined anchoring sites for individual Pt atoms. This observation extends our understanding of SMSIs by providing evidence that H 2 -induced encapsulation can occur for a wider variety of materials and should stimulate expanded studies of this effect to include nonreducible oxides with oxygen defects and the presence of disorder. It also suggests that the single-atom sites created in this manner, when combined with the plasmonic properties of the Al nanocrystal core, may allow for site-specific single-atom plasmonic photocatalysis, providing dynamic control over the light-driven reactivity in these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Evidence of redox cycling as a sub-mechanism in hydrogen production during ethanol steam reforming over La 0.7 Sr 0.3 MnO 3-x perovskite oxide catalysts

Ethanol steam reforming (ESR) is of societal interest. Here, in this work, experiments were conducted to ascertain if some of the H 2 is produced by a redox cycle involving H 2 O filling oxygen vacancies over reducible oxide catalysts. Redox cycling experiments were performed over La 0.7 Sr 0.3 MnO 3-x (100) in ultra-high vacuum. It was found that H 2 was produced from redox cycling with alternating ethanol and water exposures over La 0.7 Sr 0.3 MnO 3-x (100), with both half-cycles occurring at temperatures ≤800 K. In the first half-cycle, ethanol ‘directly’ reduced the surface to create oxygen vacancies (not by a CO intermediate), and in the second half-cycle water filled oxygen vacancies to make H 2 . The H 2 production during the water exposure has a half-cycle turnover frequency of >3.2 × 10 -2 molecules site -1 s -1 in the temperature range of 700–800 K, which is fast enough to be part of the ESR full catalytic cycle. Flowing both reactant gases together, ethanol and water, over La 0.7 Sr 0.3 MnO 3-x (100) and La 0.7 Sr 0.3 MnO 3-x powders significantly increases hydrogen production compared to pure ethanol. The results suggest that steady state ESR includes a sub-mechanism of ethanol ‘directly’ reducing the surface to create oxygen vacancy, and water filling oxygen vacancy to make some of the H 2 by a Mars van Krevelen type mechanism.

08 HYDROGEN↗
DOE OSTI2025

Low-Temperature Direct Oxidation of Propane to Propylene Oxide Using Supported Subnanometer Cu Clusters

Propylene oxide, a key commodity of the chemical industry for a wide range of consumer products, is synthesized through sequential propane dehydrogenation and epoxidation reactions. However, the lack of a direct catalytic route from propane to propylene oxide reduces efficiency and represents a major challenge for catalysis science. Herein, we report the discovery of a highly active and selective catalyst, made of alumina-supported subnanometer copper clusters, which can directly convert propane to propylene oxide at temperatures as low as 150 °C. Moreover, at higher temperatures, on the same catalysts, the selectivity is switched to propylene. Accompanying theoretical calculations indicate that partially oxidized and/or hydroxylated clusters have low activation energies for both propane dehydrogenation and propylene epoxidation pathways, enabling direct conversion with very high selectivity for propylene oxide. The discovery of a low-temperature catalyst that can convert propane directly to propylene oxide provides an important opportunity for the development of energy-efficient and economic catalysts for this industrially critical process. Similarly, when operating at higher temperatures, these catalysts are posed as potent oxidative dehydrogenation catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Development and characterization of an aerosol-generated multi-method analytical particle test material

Ceria (CeO 2 ) particles with low to ultra-low loading of nickel dopant were produced using an aerosol-based, droplet-to-particle synthesis via an in-line calcination technique. This aerosol-based synthesis method enables the production of particles with a monodisperse size distribution. These produced and well-characterized, multi-element, ceria-based particles demonstrate a material exemplar for multi-method analytical testing. They were prepared from a cerium nitrate feedstock where low loading nickel dopant was added at target Ni/(Ni + Ce) atomic percents of 1 %, 0.1 %, and 0.01 %, using a nickel nitrate spike. This methodology proved to produce ceria particles doped with a dynamic range of low to ultra-low loadings of nickel over a 24-h period, with consistent size distribution, morphology, and composition. The successful incorporation of nickel was demonstrated with bulk and single particle inductively coupled plasma mass spectroscopy and revealed notable particle-to-particle elemental homogeneity. X-ray photoelectron spectroscopy demonstrated the presence of a high concentration of nickel dopant incorporated preferentially toward the surface of the particles, and that this dopant aided oxidation of surface Ce(III) atoms to Ce(IV). These particle test materials were then validated through X-ray absorption near edge spectroscopy, comparing the ultra-low 0.01 % Ni and low 1 % Ni-doped ceria samples. This revealed a more-reduced oxidation state of the nickel with an increase in dopant concentration. Finally, this work demonstrates a synthesis and systematic characterization scheme to produce multi-method analytical test particulates.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Impact of Hydrogen Combustion on the Oxidation-induced Degradation of Heavy-duty Diesel Engine Piston Materials

High temperature ferritic-martensitic steels are candidate materials for heavy-duty diesel engine pistons. The envisioned transition to hydrogen blended fuels is expected to alter the post-combustion atmosphere in the engines, primarily resulting in a higher water vapor content (> 20 vol%) and potentially higher exhaust gas temperatures. The oxidation resistance of existing and newly developed alloys will be a critical life-limiting mechanism under these conditions. In the present work, the oxidation behavior of candidate piston alloys was evaluated in air+10 vol.% H2O and air+30 vol.% H2O at 700°C. Thermal cyclic (1h cycle) exposures were conducted for two variants of commercial UNSS42200 ferritic-martensitic steel and two developmental alloy steels for up to 300h. The developmental alloys each have similar compositions but with one containing elevated Cu levels of 3 wt.%, A significant reduction in resistance to breakaway oxidation was observed for the commercial alloys in the higher water vapor atmosphere. Microstructural characterization (optical metallography, scanning electron microscopy and electron microprobe analysis) revealed the formation of thick Fe-rich oxides even for the high Cr (~12 wt.%) steels after an initial stage of protective oxidation with MnCr-rich spinels. The impact of the evaporation-induced loss of Cr on the time and temperature dependent compositional changes in the alloys was correlated with experimental findings. For the developmental alloys, Cu additions appear to play a role in significantly reducing oxidation kinetics in air+30 vol.% H2O at 700°C.

Pillai, Rishi [ORNL] (ORCID:0000000243688197)↗
DOE OSTI2025

Modulation of lignin and anthocyanin homeostasis by GTP cyclohydrolase1 in maize

Summary Maize is a key biomass resource with wide agricultural applications. Anthocyanins, potent antioxidants, offer health benefits like reducing oxidative stress. The biosynthesis of anthocyanins competes with that of lignin for shared metabolic precursors, which can lead to trade‐offs in plant growth and feed quality. Higher lignin content can decrease silage digestibility, posing challenges for livestock feed. The maizebrown midrib 6(bm6) mutant, known for reduced lignin, has an unclear genetic basis. Here, we identifyZmGCH1as the candidate gene forbm6through fine mapping. Mutations inZmGCH1shift precursors from lignin to anthocyanin biosynthesis. Furthermore, we show that ZmGCH1 interacts with ZmPEBP15 to modulate chalcone synthase activity, thereby stabilizing the allocation of precursors between lignin and anthocyanin pathways. To evaluate the practical implications of our findings, we introduced thebm6mutation into Zhengdan958 and Xianyu335. In vitro rumen digestion assays confirmed that the introduction of thebm6mutation significantly improved silage digestibility. This discovery not only holds great potential for enhancing silage digestibility but also provides a broader strategy for optimizing maize production to better meet the increasing demands of both the food and livestock feed.

Biotechnology & Applied Microbiology↗
DOE OSTI2021

Fischer-Tropsch synthesis: Direct cobalt nitrate reduction of promoted Co/Al 2 O 3 catalysts

Direct reduction of cobalt nitrate versus conventional calcination/reduction treatment was conducted using alumina with identical methodology as previously applied to SiO 2 and TiO 2 . Similar BET surface areas, pore volumes and pore size distributions were obtained for the activated calcined and uncalcined catalysts indicating no significant difference on morphological properties. However, the reducibility slightly increases and Co crystallite size is smaller for activated uncalcined samples. Reduction phenomena were analyzed by TPR-MS and TPR-EXAFS/XANES. Combining these techniques allows an explanation of the complex phenomena occurring during the direct reduction of cobalt nitrate, as both nitrate decomposition and cobalt oxide reduction are involved. Cobalt nitrate species are converted to CoO x intermediates. These species are oxidized by NO X (from nitrate decomposition) to Co 3 O 4 spinel, which is converted to CoO prior to Co 0 formation. Noble metals (Pt, Re, Ru and Ag) improve cobalt oxide reducibility, especially for the final reduction step (i.e., CoO to Co 0 ). The effect of direct nitrate reduction on FT activity was investigated using a 1 L CSTR. Activated unpromoted and Pt-promoted uncalcined catalysts achieved higher initial and steady-state CO conversions in comparison to the corresponding calcined catalysts. The best performance was achieved with direct reduction of uncalcined 0.5%Pt-25%Co/Al 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ligand effects on electronic structure and bonding in U(iii) coordination complexes: a combined MCD, EPR and computational study

The trivalent oxidation state of uranium has been shown to undergo unique reactivity, from its ability to activate a variety of small molecules to its role in the catalytic reduction of ethene to ethane amongst others. Central to this unique reactivity and ability to rationally design ligands for isotope separation is the underlying uranium electronic structure. While electronic structure studies of U(IV), U(V), and U(VI) have been extensive, by comparison, analogous studies of more reduced oxidation states such as U(III) remains underdeveloped. Herein we report a combined MCD and EPR spectroscopic approach along with density functional theory and multireference wavefunction calculations to elucidate the effects of ligand perturbation in three uranium(III) Tp* complexes. Overall, the experimental and computational insight suggests that the change in ligand environment across this series of U(III) complexes resulted in only minor perturbations in the uranium electronic structure. This combined approach was also used to redefine the electronic ground state of a U(III) complex with a redox non-innocent Bipy - ligand. Overall, these studies demonstrate the efficacy of the combined experimental and theoretical approach towards evaluating electronic structure and bonding in U(III) complexes and provide important insight into the challenges in altering ligand environments to modify bonding and reactivity in uranium coordination chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗