Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process family design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

J-2X Abort System Development

The J-2X is an expendable liquid hydrogen (LH2)/liquid oxygen (LOX) gas generator cycle rocket engine that is currently being designed as the primary upper stage propulsion element for the new NASA Ares vehicle family. The J-2X engine will contain abort logic that functions as an integral component of the Ares vehicle abort system. This system is responsible for detecting and responding to conditions indicative of impending Loss of Mission (LOM), Loss of Vehicle (LOV), and/or catastrophic Loss of Crew (LOC) failure events. As an earth orbit ascent phase engine, the J-2X is a high power density propulsion element with non-negligible risk of fast propagation rate failures that can quickly lead to LOM, LOV, and/or LOC events. Aggressive reliability requirements for manned Ares missions and the risk of fast propagating J-2X failures dictate the need for on-engine abort condition monitoring and autonomous response capability as well as traditional abort agents such as the vehicle computer, flight crew, and ground control not located on the engine. This paper describes the baseline J-2X abort subsystem concept of operations, as well as the development process for this subsystem. A strategy that leverages heritage system experience and responds to an evolving engine design as well as J-2X specific test data to support abort system development is described. The utilization of performance and failure simulation models to support abort system sensor selection, failure detectability and discrimination studies, decision threshold definition, and abort system performance verification and validation is outlined. The basis for abort false positive and false negative performance constraints is described. Development challenges associated with information shortfalls in the design cycle, abort condition coverage and response assessment, engine-vehicle interface definition, and abort system performance verification and validation are also discussed.

Santi, Louis M.↗
NASA NTRS1995

Environmentally compatible solid rocket propellants

Hercules' clean propellant development research is exploring three major types of clean propellant: (1) chloride-free formulations (no chlorine containing ingredients), being developed on the Clean Propellant Development and Demonstration (CPDD) contract sponsored by Phillips Laboratory, Edwards Air Force Base, CA; (2) low HCl scavenged formulations (HCl-scavenger added to propellant oxidized with ammonium perchlorate (AP)); and (3) low HCl formulations oxidized with a combination of AN and AP (with or without an HCl scavenger) to provide a significant reduction (relative to current solid rocket boosters) in exhaust HCl. These propellants provide performance approaching that of current systems, with less than 2 percent HCl in the exhaust, a significant reduction (greater than or equal to 70 percent) in exhaust HCl levels. Excellent processing, safety, and mechanical properties were achieved using only readily available, low cost ingredients. Two formulations, a sodium nitrate (NaNO3) scavenged HTPB and a chloride-free hydroxy terminated polyether (HTPE) propellant, were characterized for ballistic, mechanical, and rheological properties. In addition, the hazards properties were demonstrated to provide two families of class 1.3, 'zero-card' propellants. Further characterization is planned which includes demonstration of ballistic tailorability in subscale (one to 70 pound) motors over the range of burn rates required for retrofit into current Hercules space booster designs (Titan 4 SRMU and Delta 2 GEM).

Jacox, James L.↗
NASA NTRS1987

GTOSS: Generalized Tethered Object Simulation System

GTOSS represents a tether analysis complex which is described by addressing its family of modules. TOSS is a portable software subsystem specifically designed to be introduced into the environment of any existing vehicle dynamics simulation to add the capability of simulating multiple interacting objects (via multiple tethers). These objects may interact with each other as well as with the vehicle into whose environment TOSS is introduced. GTOSS is a stand alone tethered system analysis program, representing an example of TOSS having been married to a host simulation. RTOSS is the Results Data Base (RDB) subsystem designed to archive TOSS simulation results for future display processing. DTOSS is a display post processors designed to utilize the RDB. DTOSS extracts data from the RDB for multi-page printed time history displays. CTOSS is similar to DTOSS, but is designed to create ASCII plot files. The same time history data formats provided for DTOSS (for printing) are available via CTOSS for plotting. How these and other modules interact with each other is discussed.

Lang, David D.↗
NASA NTRS1972

Determination of mean surface position and sea state from the radar return of a short-pulse satellite altimeter

Using the specular point theory of scatter from a very rough surface, the average backscatter cross section per unit area per radar cell width is derived for a cell located at a given height above the mean sea surface. This result is then applied to predict the average radar cross section observed by a short-pulse altimeter as a function of time for two modes of operation: pulse-limited and beam-limited configurations. For a pulse-limited satellite altimeter, a family of curves is calculated showing the distortion of the leading edge of the receiver output signal as a function of sea state (i.e., wind speed). A signal processing scheme is discussed that permits an accurate determination of the mean surface position--even in high seas--and, as a by-product, the estimation of the significant seawave height (or wind speed above the surface). Comparison of these analytical results with experimental data for both pulse-limited and beam-limited operation lends credence to the model. Such a model should aid in the design of short-pulse altimeters for accurate determination of the geoid over the oceans, as well as for the use of such altimeters for orbital sea-state monitoring.

Barrick, D. E.↗
NASA NTRS2005

Development of the Architectural Simulation Model for Future Launch Systems and its Application to an Existing Launch Fleet

A significant portion of lifecycle costs for launch vehicles are generated during the operations phase. Research indicates that operations costs can account for a large percentage of the total life-cycle costs of reusable space transportation systems. These costs are largely determined by decisions made early during conceptual design. Therefore, operational considerations are an important part of vehicle design and concept analysis process that needs to be modeled and studied early in the design phase. However, this is a difficult and challenging task due to uncertainties of operations definitions, the dynamic and combinatorial nature of the processes, and lack of analytical models and the scarcity of historical data during the conceptual design phase. Ultimately, NASA would like to know the best mix of launch vehicle concepts that would meet the missions launch dates at the minimum cost. To answer this question, we first need to develop a model to estimate the total cost, including the operational cost, to accomplish this set of missions. In this project, we have developed and implemented a discrete-event simulation model using ARENA (a simulation modeling environment) to determine this cost assessment. Discrete-event simulation is widely used in modeling complex systems, including transportation systems, due to its flexibility, and ability to capture the dynamics of the system. The simulation model accepts manifest inputs including the set of missions that need to be accomplished over a period of time, the clients (e.g., NASA or DoD) who wish to transport the payload to space, the payload weights, and their destinations (e.g., International Space Station, LEO, or GEO). A user of the simulation model can define an architecture of reusable or expendable launch vehicles to achieve these missions. Launch vehicles may belong to different families where each family may have it own set of resources, processing times, and cost factors. The goal is to capture the required resource levels of the major launch elements and their required facilities. The model s output can show whether or not a certain architecture of vehicles can meet the launch dates, and if not, how much the delay cost would be. It will also produce aggregate figures of missions cost based on element procurement cost, processing cost, cargo integration cost, delay cost, and mission support cost. One of the most useful features of this model is that it is stochastic where it accepts statistical distributions to represent the processing times mimicking the stochastic nature of real systems.

Rabadi, Ghaith↗
NASA NTRS2008

Moving Away from Ones and Zeros, Designing a Ground Data System Based on Higher Levels of Abstraction

Previous JPL ground systems have been designed with the Ground Data System (GDS) engineer in mind. The focus on these systems has been on packaging and delivery of low level information (frames, packets, telemetry values) to the end user. It was not that long ago when project teams would be huddled over a workstation, examining crude displays of telemetry bits organized in various ways, trying to determine the status of a spacecraft. Understanding the data often required additional levels of GDS expertise, or worse, transformation of the raw data into alternative formats followed by ingestion into other tools so that the data became meaningful. The primary focus was often to answer these types of questions: "Why did this particular frame fail Reed-Solomon decode? Why did this packet get marked as invalid? Why am I missing a block of telemetry from my query?" -- which are completely valid questions to ask from a GDS Engineer's point of view, and large families of tools have been designed to help answer these questions. But these are not the questions that most users care about - which are more like: "Why is the battery state of charge trending down? Show me a summary image report for the last traverse to the target. Show me a data accountability summary for the last DSN pass." Answers to these questions, which are what users are looking for, requires a higher level of abstraction and supporting tools than mining through ones and zeros. JPL has created a next generation capability called the Mission Data Processing and Control System (MPCS) which is designed to support this higher level of abstraction by providing customizable views of the ground system combining collections of lower level information into more meaningful ways. Instead of examining frames, packets, and individual telemetry data points -- MPCS is capable of providing comprehensive summary reports, product status, overall flight/ground event status, as well as payload health summaries. Based on these higher level views, end users can make tactical or strategic decisions, or drop into detailed analysis as needed. System designers need to continue building systems that support low level GDS troubleshooting - but the basic design of a GDS should be geared towards what end users actually need to see. This paper will describe the capabilities of MPCS that directly support these higher levels of abstraction, and which are being used today in missions such as the Mars Science Laboratory and other NASA missions.

MPCS↗
NASA NTRS2005

Nozzle Aerodynamic Stability During a Throat Shift

An experimental investigation was conducted on the internal aerodynamic stability of a family of two-dimensional (2-D) High Speed Civil Transport (HSCT) nozzle concepts. These nozzles function during takeoff as mixer-ejectors to meet acoustic requirements, and then convert to conventional high-performance convergent-divergent (CD) nozzles at cruise. The transition between takeoff mode and cruise mode results in the aerodynamic throat and the minimum cross-sectional area that controls the engine backpressure shifting location within the nozzle. The stability and steadiness of the nozzle aerodynamics during this so called throat shift process can directly affect the engine aerodynamic stability, and the mechanical design of the nozzle. The objective of the study was to determine if pressure spikes or other perturbations occurred during the throat shift process and, if so, identify the caused mechanisms for the perturbations. The two nozzle concepts modeled in the test program were the fixed chute (FC) and downstream mixer (DSM). These 2-D nozzles differ principally in that the FC has a large over-area between the forward throat and aft throat locations, while the DSM has an over-area of only about 10 percent. The conclusions were that engine mass flow and backpressure can be held constant simultaneously during nozzle throat shifts on this class of nozzles, and mode shifts can be accomplished at a constant mass flow and engine backpressure without upstream pressure perturbations.

Kawecki, Edwin J.↗
NASA NTRS1977

Focal characteristics of spheroidal geodesic lenses for integrated optical processing

Aspheric shaping of geodesic lenses in optical waveguides is suggested as a means for correcting spherical aberrations. The technique is complementary to the method of Spiller and Harper, in which geodesic lens aberrations are reduced by thickening the waveguiding layer in the lens region. The properties of a family of oblate-spheroidal lenses with no third-order spherical aberrations are described theoretically. Diffraction-limited performance over apertures up to one-half the full lens aperture is predicted for lenses with true f/numbers (focal length divided by useful aperture) in the range 2-12. By combining spheroidal-shaping and mode-index correction techniques, geodesic lenses free from both third- and fifth-order aberrations can be designed. These lenses show diffraction-limited performance over apertures of a centimeter or more when true f/numbers are in the range 1.5-9.5.

Vahey, D. W.↗
NASA NTRS2008

Single-Mode WGM Resonators Fabricated by Diamond Turning

A diamond turning process has made possible a significant advance in the art of whispering-gallery-mode (WGM) optical resonators. By use of this process, it is possible to fashion crystalline materials into WGM resonators that have ultrahigh resonance quality factors (high Q values), are compact (ranging in size from millimeters down to tens of microns), and support single electromagnetic modes. This development combines and extends the developments reported in "Few- Mode Whispering-Gallery-Mode Resonators" (NPO-41256), NASA Tech Briefs, Vol. 30, No. 1 (January 2006), page 16a and "Fabrication of Submillimeter Axisymmetric Optical Components" (NPO-42056), NASA Tech Briefs, Vol. 31, No. 5 (May 2007), page 10a. To recapitulate from the first cited prior article: A WGM resonator of this special type consists of a rod, made of a suitable transparent material, from which protrudes a thin circumferential belt of the same material. The belt is integral with the rest of the rod and acts as a circumferential waveguide. If the depth and width of the belt are made appropriately small, then the belt acts as though it were the core of a single-mode optical fiber: the belt and the rod material adjacent to it support a single, circumferentially propagating mode or family of modes. To recapitulate from the second cited prior article: A major step in the fabrication of a WGM resonator of this special type is diamond turning or computer numerically controlled machining of a rod of a suitable transparent crystalline material on an ultrahigh-precision lathe. During the rotation of a spindle in which the rod is mounted, a diamond tool is used to cut the rod. A computer program is used to control stepping motors that move the diamond tool, thereby controlling the shape cut by the tool. Because the shape can be controlled via software, it is possible to choose a shape designed to optimize a resonator spectrum, including, if desired, to limit the resonator to supporting a single mode. After diamond turning, a resonator can be polished to increase its Q. By virtue of its largely automated, computer-controlled nature, the process is suitable for mass production of nominally identical single-mode WGM resonators. In a demonstration of the capabilities afforded by this development, a number of WGM resonators of various designs were fabricated side by side on the surface of a single CaF2 rod (see figure).

Grudinin, Ivan↗
NASA NTRS1988

A new synthetic route to a family of non-classical addition-type thermoplastics. I - Concept and demonstration

A synthesis scheme was developed for a host of nonclassical addition-type thermoplastics (ATT) that can be cured by an addition reaction, leading to a linear polymer structure. The synthesis involves the reaction of an acetylene-terminated prepolymer with either a bismaleimide (BMI) or a biscitraconimide. A new polymer, designated LaRC-RP80, synthesized using this scheme, was found to exhibit several significantly improved properties over the commercial BMI, Kerimid 601, including an eight-fold increase in toughness while maintaining a high Tg, a higher (by 167 C) heat stability, and a 50-percent increase in moisture resistance. In addition, LaRC-RP80 has good hot/wet lap shear strength and processes easily at 288 C without voids in the finished product.

Pater, Ruth H.↗
NASA NTRS1993

On the spectral stability of time integration algorithms for a class of constrained dynamics problems

Incomplete field formulations have recently been the subject of intense research because of their potential in coupled analysis of independently modeled substructures, adaptive refinement, domain decomposition, and parallel processing. This paper discusses the design and analysis of time-integration algorithms for these formulations and emphasizes the treatment of their inter-subdomain constraint equations. These constraints are shown to introduce a destabilizing effect in the dynamic system that can be analyzed by investigating the behavior of the time-integration algorithm at infinite and zero frequencies. Three different approaches for constructing penalty-free unconditionally stable second-order accurate solution procedures for this class of hybrid formulations are presented, discussed and illustrated with numerical examples. The theoretical results presented in this paper also apply to a large family of nonlinear multibody dynamics formulations. Some of the algorithms outlined herein are important alternatives to the popular technique consisting of transforming differential/algebraic equations into ordinary differential equations via the introduction of a stabilization term that depends on arbitrary constants and that influences the computed so1ution.

Farhat, Charbel↗
NASA NTRS1991

The aeolian wind tunnel

The aeolian wind tunnel is a special case of a larger subset of the wind tunnel family which is designed to simulate the atmospheric surface layer winds to small scale (a member of this larger subset is usually called an atmospheric boundary layer wind tunnel or environmental wind tunnel). The atmospheric boundary layer wind tunnel is designed to simulate, as closely as possible, the mean velocity and turbulence that occur naturally in the atmospheric boundary layer (defined as the lowest portion of the atmosphere, of the order of 500 m, in which the winds are most greatly affected by surface roughness and topography). The aeolian wind tunnel is used for two purposes: to simulate the physics of the saltation process and to model at small scale the erosional and depositional processes associated with topographic surface features. For purposes of studying aeolian effects on the surface of Mars and Venus as well as on Earth, the aeolian wind tunnel continues to prove to be a useful tool for estimating wind speeds necessary to move small particles on the three planets as well as to determine the effects of topography on the evolution of aeolian features such as wind streaks and dune patterns.

Iversen, J. D.↗
NASA NTRS1990

Space Station Freedom: Dynamic instrumentation for a large space structure

A proposed approach called Modal Identification Experiment (MIE) for obtaining on-orbit dynamic response measurements on Space Station Freedom, the first of a family of large, flexible space structures is discussed. The Phase 2 conceptual design study which provides a conceptual design of a proposed measurement system and an experimental protocol for inobstrusively collecting dynamic response data critical to characterizing important vibration modes of Space Station Freedom were recently concluded. The case for conducting such a measurement program is presented and the specific MIE objectives that were identified, are listed. The sequence of discrete Space Station Freedom assembly configurations is described, and the Phase 2 conceptual design of the experiment and instrumentation system are defined. In addition, a plan to utilize a space station hydrid scale model in laboratory simulations as part of the design process are discussed.

Raney, John P.↗
NASA NTRS1994

A manufacturing database of advanced materials used in spacecraft structures

Cost savings opportunities over the life cycle of a product are highest in the early exploratory phase when different design alternatives are evaluated not only for their performance characteristics but also their methods of fabrication which really control the ultimate manufacturing costs of the product. In the past, Design-To-Cost methodologies for spacecraft design concentrated on the sizing and weight issues more than anything else at the early so-called 'Vehicle Level' (Ref: DOD/NASA Advanced Composites Design Guide). Given the impact of manufacturing cost, the objective of this study is to identify the principal cost drivers for each materials technology and propose a quantitative approach to incorporating these cost drivers into the family of optimization tools used by the Vehicle Analysis Branch of NASA LaRC to assess various conceptual vehicle designs. The advanced materials being considered include aluminum-lithium alloys, thermoplastic graphite-polyether etherketone composites, graphite-bismaleimide composites, graphite- polyimide composites, and carbon-carbon composites. Two conventional materials are added to the study to serve as baseline materials against which the other materials are compared. These two conventional materials are aircraft aluminum alloys series 2000 and series 7000, and graphite-epoxy composites T-300/934. The following information is available in the database. For each material type, the mechanical, physical, thermal, and environmental properties are first listed. Next the principal manufacturing processes are described. Whenever possible, guidelines for optimum processing conditions for specific applications are provided. Finally, six categories of cost drivers are discussed. They include, design features affecting processing, tooling, materials, fabrication, joining/assembly, and quality assurance issues. It should be emphasized that this database is not an exhaustive database. Its primary use is to make the vehicle designer aware of some of the most important aspects of manufacturing associated with his/her choice of the structural materials. The other objective of this study is to propose a quantitative method to determine a Manufacturing Complexity Factor (MCF) for each material being contemplated. This MCF is derived on the basis of the six cost drivers mentioned above plus a Technology Readiness Factor which is very closely related to the Technology Readiness Level (TRL) as defined in the Access To Space final report. Short of any manufacturing information, our MCF is equivalent to the inverse of TRL. As more manufacturing information is available, our MCF is a better representation (than TRL) of the fabrication processes involved. The most likely application for MCF is in cost modeling for trade studies. On-going work is being pursued to expand the potential applications of MCF.

Bao, Han P.↗
NASA NTRS2019

ISS Science Payload Command & Data Handling

For decades, the International Space Station (ISS) has provided a distinctive platform in low Earth orbit for experimental research. In support of this platform is a family of avionics systems that enables reliable data distribution of the many science payloads installed, and future internal and external payloads. This poster provides an update to the ISS avionics hardware system architecture, including design change successes, test bed architecture, and performance upgrades in the operation of all ISS avionics. We conclude with an outlook on future avionics system enhancements required to support additional modules and payload expansions taking place on the ISS, and how these avionics systems translate to a lunar gateway.

1553↗
NASA NTRS1989

Development of a tether deployment monitoring system

The feasibility of monitoring the position of a tether during orbital deployment is discussed. Attention is given to the techniques for attaching reflectors to the tether at periodic intervals during the deployment process, which could then be tracked visually or with a radar unit that is pointed towards the targets by the control system. Consideration is also given to a method for tether attitude and tension detection, and a launching device to attach small instrumentation platforms onto the tether during deployment. The configuration of a tether deployment monitoring system (TEDEMS) and the equipment developed to perform the above tasks are described, along with an analysis of requirements for the construction of a family of space-borne TEDEMS suitable for use on the Space Shuttle, Expendable Launch Vehicles, or the Space Station. The potential uses of the TEDEMS for launching small tether-borne experimental packages are discussed. Design and block diagrams are included.

Ibanez, P.↗
NASA NTRS1991

Integrating CLIPS applications into heterogeneous distributed systems

SOCIAL is an advanced, object-oriented development tool for integrating intelligent and conventional applications across heterogeneous hardware and software platforms. SOCIAL defines a family of 'wrapper' objects called agents, which incorporate predefined capabilities for distributed communication and control. Developers embed applications within agents and establish interactions between distributed agents via non-intrusive message-based interfaces. This paper describes a predefined SOCIAL agent that is specialized for integrating C Language Integrated Production System (CLIPS)-based applications. The agent's high-level Application Programming Interface supports bidirectional flow of data, knowledge, and commands to other agents, enabling CLIPS applications to initiate interactions autonomously, and respond to requests and results from heterogeneous remote systems. The design and operation of CLIPS agents are illustrated with two distributed applications that integrate CLIPS-based expert systems with other intelligent systems for isolating and mapping problems in the Space Shuttle Launch Processing System at the NASA Kennedy Space Center.

Adler, Richard M.↗
NASA NTRS1991

Baseband pulse shaping techniques for nonlinearly amplified pi/4-QPSK and QAM systems

A new generation of multi-stage pi/4-shifted QPSK and of superposed quadrature-amplitude-modulated (SQAM) modulators-coherent demodulators (modems) and of continuous phase modulated (CPM)-gaussian premodulation filtered minimum-shift-keying (MGMSK) systems is proposed and studied. These modems will lead to bandwidth and power efficient satellite communications systems designs. As an illustrative application, a baseband processing technique pi/4-controlled transition PSK (pi/4-CTPSK) is described. To develop a cost and power efficient design strategy, we assume that nonlinear, fully saturated high power amplifiers (HPA) are utilized in the satellite earth station transmitter and in the satellite transponder. Modem structures which could lead to application specific integrated circuit (ASIC) satellite on-board processing universal modem applications are also considered. Multistate GMSK (i.e., MGMSK) signal generation methods by means of two or more RF combined nonlinearly amplified SQAM modems and by one multistate (in-phase and quadrature-baseband premodulation filtered-superposed) SQAM architecture and one RF nonlinear amplifier are studied. During the SQAM modem development phase we investigate the potential system advantages of the pi/4-shifted logic. The bandwidth efficiency of the proposed multistate GMSK and baseband filtered PAM-FM modulator (a new class in the CPM family) will be significantly higher than that of conventional G-MSK systems. To optimize the practical P(sub e) = f((E sub b)/(N sub o)) performance we consider improved coherent demodulation MGMSK structures such as deviated-frequency locking coherent demodulators. For relative low bit rate SATCOM applications, e.g., bit rates less than 300 kb/s, phase noise tracking cancellation (for fixed site earth station) and phase noise cancellation as well as Doppler compensation (for satellite to mobile earth station) applications may be required. We study digital channel sounding methods which could cancel the phase noise-caused degradations of CPM and GMSK modems.

Feher, Kamilo↗