Search NASA⌕ Search

SEARCH · Search NASA

Results for “RELEASE DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Integrated Security-Safety Consequence Study of a Heat Pipe Reactor

This report presents a preliminary demonstration of integrated security/safety consequence modeling to support potential physical security exemption justifications under the new Title 10 Code of Federal Regulations Part 53 licensing pathway, which allows exemptions if sabotage-induced radiological consequences do not exceed 25 rem at the site boundary two hours after release without mitigative actions. A hypothetical heat pipe microreactor subjected to direct sabotage by a 150 lbs. TNT-equivalent high-explosive device was analyzed using a simplified radionuclide release estimate based on DOE-HDBK-3010-94, implemented in the MELCOR severe accident analysis code to model release transport and attenuation through reactor/building compartments, with MELCOR outputs coupled to MACCS to compute offsite doses and the distance-to-threshold metric D 25rem . Six scenarios were evaluated to examine sensitivities to release pathway/building configuration and radionuclide form (vapor versus aerosols with different size distributions). Results show a positive correlation between leak path factor and D 25rem and indicate that reactor building compartmentalization can substantially reduce consequences (a single-story configuration reduced D 25rem by roughly an order of magnitude relative to a cavity-only configuration), while vapor versus aerosol assumptions had limited impact for the modeled two-story case on the spatial grid used.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Device Performance of Emerging Photovoltaic Materials (Version 3)

Abstract Following the 2nd release of the “Emerging PV reports,” the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer‐reviewed articles in academic journals since August 2021. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open‐circuit voltage, short‐circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application, and are put into perspective using, e.g., the detailed balance efficiency limit. The 3rd installment of the “Emerging PV reports” extends the scope toward triple junction solar cells.

14 SOLAR ENERGY↗

Highly stable and efficient tandem organic light-emitting devices with intermediate connectors using lithium amide as n-type dopant

In this work, we report thermally decomposable lithium amide (LiNH{sub 2}) feasible to function as an effective n-type dopant for intermediate connectors in tandem organic light-emitting devices (OLEDs). Metallic lithium, which is released from the decomposition process of LiNH{sub 2}, is proved by X-ray photoelectron spectroscopy and responsible for n-type electrical doping of electron transporting materials. We demonstrate that tandem OLEDs using LiNH{sub 2} and Cs{sub 2}CO{sub 3} as n-type dopants, respectively, give a comparable electroluminescence efficiency and, moreover, the device with LiNH{sub 2} has far longer operational lifetime. The results therefore highlight the significance of selecting suitable n-type dopant in intermediate connectors to fabricate high-stability tandem OLEDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scrape-off layer stability, turbulence and transport in MAST-U (Final Report)

U.S. Department of Energy (DOE) supported work at Lodestar Research Corporation under grant DE-SC0019270 is summarized in this final report. The research conducted under this grant explored the properties of the edge plasma in spherical torus magnetic fusion devices. Harnessing the energy that is released in fusion reactions would provide a safe and abundant source of power to meet the growing energy needs of the world population. The edge and scrape-off layer (SOL) region of fusion plasmas is the region where the hot core plasma transitions to a cooler surrounding boundary plasma. The properties of this boundary plasma determine how interactions with material surfaces will impact both the overall device performance and the lifetime of crucial components such as the walls of the device chamber and other hardware. The research carried out studied filamentary plasma instabilities and turbulent transport in the edge and SOL of the MAST U spherical torus.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of side-chain length on long-term release kinetics from poly(2-oxazoline)-drug conjugate networks

Four drug-conjugated poly(2-alkyl-2-oxazoline) (PAOx) networks with different hydrophobicity were synthesized via copolymerization of either 2-methyl-, 2-ethyl-, 2-propyl- or 2-butyl-2-oxazoline with the functional monomer, 2-dec-9-enyl-2-oxazoline. The incorporation of a labile ester linkage between the polymer and the drug benazepril allowed for sustained drug release over periods of months with the release rates strongly depending on the hydrophobicity of the polymer pendant groups. Drug loading of 13 ± 2 wt% was used with 10 mol% crosslinking sites simply by tuning the thiol-ene stoichiometry. The networks exhibited negligible cell toxicity but cell repulsion was observed for hydrogels based on poly(2-methyl-2-oxazoline) and poly(2-ethyl-2-oxazoline) while those based on poly(2-n-propyl-2-oxazoline) and poly(2-n-butyl-2-oxaoline) showed cell adhesion. Furthermore, these results suggest that PAOx networks have great potential as drug delivery devices for long-lasting drug release applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of an FPGA-based multipoint laser pyroshock measurement system for explosive bolts

Pyroshock can cause failure to the objective of an aerospace structure by damaging its sensitive electronic equipment, which is responsible for performing decisive operations. A pyroshock is the high intensity shock wave that is generated when a pyrotechnic device is explosively triggered to separate, release, or activate structural subsystems of an aerospace architecture. Pyroshock measurement plays an important role in experimental simulations to understand the characteristics of pyroshock on the host structure. This paper presents a technology to measure a pyroshock wave at multiple points using laser Doppler vibrometers (LDVs). These LDVs detect the pyroshock wave generated due to an explosive-based pyrotechnical event. Field programmable gate array (FPGA) based data acquisition is used in the study to acquire pyroshock signals simultaneously from multiple channels. This paper describes the complete system design for multipoint pyroshock measurement. The firmware architecture for the implementation of multichannel data acquisition on an FPGA-based development board is also discussed. An experiment using explosive bolts was configured to test the reliability of the system. Pyroshock was generated using explosive excitation on a 22-mm-thick steel plate. Three LDVs were deployed to capture the pyroshock wave at different points. The pyroshocks captured were displayed as acceleration plots. The results showed that our system effectively captured the pyroshock wave with a peak-to-peak magnitude of 303 741 g. The contribution of this paper is a specialized architecture of firmware design programmed in FPGA for data acquisition of large amount of multichannel pyroshock data. The advantages of the developed system are the near-field, multipoint, non-contact, and remote measurement of a pyroshock wave, which is dangerous and expensive to produce in aerospace pyrotechnic tests.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Printed Assemblies of Inorganic Light-Emitting Diodes for Deformable and Semitransparent Displays

We have developed methods for creating microscale inorganic light-emitting diodes (LEDs) and for assembling and interconnecting them into unusual display and lighting systems. The LEDs use specialized epitaxial semiconductor layers that allow delineation and release of large collections of ultrathin devices. Diverse shapes are possible, with dimensions from micrometers to millimeters, in either flat or “wavy” configurations. Printing-based assembly methods can deposit these devices on substrates of glass, plastic, or rubber, in arbitrary spatial layouts and over areas that can be much larger than those of the growth wafer. Furthermore, the thin geometries of these LEDs enable them to be interconnected by conventional planar processing techniques. Displays, lighting elements, and related systems formed in this manner can offer interesting mechanical and optical properties.

42 ENGINEERING↗

pnnl/FlexyAirDeepMPC

This is a trained machine learning model written in Pytorch for automated control of the FlexyAir (https://ocl.sk/hardware/flexyair/) dynamical system control educational device. This software is to be released to support our demonstration of our deepMPC methods on embedded hardware to control a real (albeit tutorial) physical system with control actuators.

Tuor, Aaron↗

Effects of Nuclear Weapons

The study of the effects of nuclear weapons has provided hundreds of persons a lifelong career in a technical field. This presentation is just a snapshot of the topic covering the four defined burst regions, documents devoted to the topic, and the actual effects of a nuclear explosive device. With the aid of previously released atomic testing movies and superb Hollywood actor narrations, we examine the effects of thermal, blast, radiation, EMP on both structures and people. Lastly, the effects of a 1 kt nuke detonated at the intersection of South Las Vegas Blvd. and Tropicana wiping out the Excalibur, MGM Grand, New York New York, and Tropicana hotels and the M&M store.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Microneedle arrays for biosensing and drug delivery

Methods, structures, and systems are disclosed for biosensing and drug delivery techniques. In one aspect, a^ device for detecting an analyte and/or releasing a biochemical into a biological fluid can include an array of hollowed needles, in which each needle includes a protruded needle structure including an exterior wall forming a hollow interior and an opening at a terminal end of the protruded needle structure that exposes the hollow interior, and a probe inside the exterior wall to interact with one or more chemical or biological substances that come in contact with the probe via the opening to produce a probe sensing signal, and an array of wires that are coupled to probes of the array of hollowed needles, respectively, each wire being electrically conductive to transmit the probe sensing signal produced by a respective probe.

59 BASIC BIOLOGICAL SCIENCES↗

Microneedle arrays for biosensing and drug delivery

Methods, structures, and systems are disclosed for biosensing and drug delivery techniques. In one aspect, a device for detecting an analyte and/or releasing a biochemical into a biological fluid can include an array of hollowed needles, in which each needle includes a protruded needle structure including an exterior wall forming a hollow interior and an opening at a terminal end of the protruded needle structure that exposes the hollow interior, and a probe inside the exterior wall to interact with one or more chemical or biological substances that come in contact with the probe via the opening to produce a probe sensing signal, and an array of wires that are coupled to probes of the array of hollowed needles, respectively, each wire being electrically conductive to transmit the probe sensing signal produced by a respective probe.

59 BASIC BIOLOGICAL SCIENCES↗

Microneedle arrays for biosensing and drug delivery

Methods, structures, and systems are disclosed for biosensing and drug delivery techniques. In one aspect, a device for detecting an analyte and/or releasing a biochemical into a biological fluid can include an array of hollowed needles, in which each needle includes a protruded needle structure including an exterior wall forming a hollow interior and an opening at a terminal end of the protruded needle structure that exposes the hollow interior, and a probe inside the exterior wall to interact with one or more chemical or biological substances that come in contact with the probe via the opening to produce a probe sensing signal, and an array of wires that are coupled to probes of the array of hollowed needles, respectively, each wire being electrically conductive to transmit the probe sensing signal produced by a respective probe.

47 OTHER INSTRUMENTATION↗

Decontamination and Decommissioning Program of a Radiopharmaceuticals Production Facility - 17103

On May 2012, Best Medical Belgium (BMB) S.A., a manufacturer of pharmaceutical products located on the nuclear site of Fleurus, was declared bankrupt. According to the Belgian law, ONDRAF/NIRAS (Belgian Radioactive Waste Management Agency) was entrusted with the clean-up and the decommissioning operations of the former BMB facilities, nowadays known as 'ONDRAF/NIRAS Site Fleurus' (ONSF). In June 2015, ONSF launched a Decontamination and Decommissioning (D and D) program, for which Tractebel supports the definition of the clean-up and decommissioning strategies; the drafting of the Final Decommissioning Plan (FDP) and License Application for decommissioning; and the follow-up of the clean-up and upcoming D and D works on site. Four nuclear buildings are part of the clean-up and D and D activities. One of them, Building 14 (B14), represents the most challenging task with the clean-up of highly contaminated areas and their further decommissioning up to greenfield. Beside its two cyclotrons successively used for the production of radioisotopes, this building features hot cells and glove boxes used for the purification of radioisotopes and the conditioning of the final pharmaceutical product. The present paper aims at presenting the development of the D and D program in terms of modifications of existing facilities to allow carrying out the clean-up and D and D activities and the management of dismantled radioactive materials in a safe, efficient and cost-effective way as well as in terms of strategic options to be developed for the FDP. To support the clean-up and D and D activities, several workshops have been designed in order to treat radioactive materials removed from the building rooms. Those workshops feature an input buffer storage area, a common output buffer storage area and installations for the treatment of radioactive materials and waste (handling devices, cutting means, decontamination means, free release measurements means, etc.). Some modifications to the existing auxiliary systems will be required in order to dispose of appropriate systems to operate those workshops in a safe way. Activated concrete structures will constitute the most important part of radioactive materials that will arise from the decommissioning activities. To limit the total decommissioning costs, and especially the costs associated to radioactive waste management, two strategies have been developed in order to manage a part of activated concrete as candidate for free release with a certain decay period or as candidate for conventional landfill. Both strategies will have to be further detailed and discussed with the competent Authorities to ensure they can actually be implemented. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Method of forming through substrate vias (TSVs) and singulating and releasing die having the TSVs from a mechanical support substrate

Accessing a workpiece object in semiconductor processing is disclosed. The workpiece object includes a mechanical support substrate, a release layer over the mechanical support substrate, and an integrated circuit substrate coupled over the release layer. The integrated circuit substrate includes a device layer having semiconductor devices. The method also includes etching through-substrate via (TSV) openings through the integrated circuit substrate that have buried ends at or within the release layer including using the release layer as an etch stop. TSVs are formed by introducing one or more conductive materials into the TSV openings. A die singulation trench is etched at least substantially through the integrated circuit substrate around a perimeter of an integrated circuit die. The integrated circuit die is at least substantially released from the mechanical support substrate.

36 MATERIALS SCIENCE↗

Direct Air Capture of Carbon Dioxide Using Nickel Hydroxide Batteries in a Membrane Electrode Assembly

Direct air capture (DAC) is a growing field responding to the need to remove carbon dioxide from the atmosphere. Several technologies are being developed today attempting to meet this need. The technology furthest in development are temperature swing adsorption technologies which have recently moved out of the pilot plant scale.1 This presentation looks to present an electrochemical device as alternative to these technologies. The electrochemical device proposed is a pair of nickel hydroxide (Ni(OH)2) battery electrodes which produce hydroxide (OH-). The hydroxide reacts with carbon dioxide (CO2) to create carbonate (CO32-) and bicarbonate (HCO3-). These carbonates can be transported from the cathode across an anion exchange membrane to the anode where they are evolved back into CO2 due to a pH reduction at the anode. This builds on work that optimized a Hydroxide Exchange Membrane Fuel Cell (HEMFC) for CO2 capture, showing the efficacy of an electrochemically mediated pH swing carbon capture device.2,3 The benefit of the nickel hydroxide battery approach is the low energy cost associated with separation. Because a pair of nickel hydroxide batteries undergo the same electrochemical reaction, low potentials, and thus low energy cost is required. Experiments have shown device level energy requirements of less than 1 MWh ton-1CO2. Most of the energy required by the device produces the pH gradient used to capture and release CO2. The biggest hurdle for this electrochemical approach is increasing the flux of CO2 to allow for more compact devices. Strategies for managing the transient charge and discharge behavior of the battery system will be discussed. Focus will be on improving flux to reduce the overall cost of the device.

Buchen, James↗

Molecular Beam Epitaxy of Monocrystalline GaAs on Water-Soluble NaCl Thin Films

The goal of this project was to demonstrate the feasibility of employing an epitaxial NaCl thin film as a water-soluble release layer for III-V photovoltaic devices and GaAs substrate reuse. Over the course of this project efforts were focused on: 1) achieving crystalline NaCl thin films on GaAs (100) substrate, 2) exploring the growth parameters for subsequent GaAs on NaCl thin films in effort to improve crystallinity of the semiconductor layer, 3) deposition and removal of single crystalline solar cell devices from the parent substrate, and 4) improving morphology and reducing large scale defects in the removed layers to fabricate a working a solar cell device. There was no previous work on direct integration of GaAs/NaCl/GaAs heterostructures at the time of this study. We used molecular beam epitaxy (MBE) to deposit both the alkali halide salt and subsequent III-V material in the same chamber, with no vacuum break. Single crystalline GaAs films were achieved on NaCl layers through careful tuning of the growth parameters and exposure to the reflection high energy electron diffraction (RHEED) beam. Dissolution of the NaCl layer in water provided rapid release of the semiconductor layer from the substrate. Monocrystalline solar cells were grown on the III-V templates using MBE and dynamic hydride vapor phase epitaxy (HVPE). However, the extended time at elevated temperatures required for the cell growth resulted in large area defects from fusion of the semiconductor overlayer to the substrate, causing shorts in fabricated devices. By changing the way that the template layer was grown, the density of these defects could be reduced. Unfortunately, the defects were not reduced to a level allowing for fabrication of a working device.

14 SOLAR ENERGY↗

Nonidealities in Rotating Detonation Engines

A rotating detonation engine (RDE) is a realization of pressure-gain combustion, wherein a traveling detonation wave confined in a chamber provides shock-based compression along with chemical heat release. Due to the high wave speeds, such devices can process high mass flow rates in small volumes, leading to compact and unconventional designs. RDEs involve unsteady and multiscale physics, and their operational characteristics are determined by an equilibrium between large- and small-scale processes. While RDEs can provide a significant theoretical gain in efficiency, achieving this improvement requires an understanding of the multiscale coupling. Specifically, unavoidable nonidealities, such as unsteady mixing, secondary combustion, and multiple competing waves associated with practical designs, need to be understood and managed. The secondary combustion processes arise from fuel/air injection and unsteady and incomplete mixing, and can create spurious losses. In addition, a combination of multiple detonation and secondary waves compete and define the dynamical behavior of mixing, heat release distribution, and the overall mode of operation of the device. This review discusses the current understanding of such nonidealities and describes the tools and techniques used to gain insight into the extreme unsteady environment in such combustors.

33 ADVANCED PROPULSION SYSTEMS↗

Dispatching function calls across accelerator devices

In one embodiment, a computer-implemented method for dispatching a function call includes receiving, at a supervisor processing element (PE) and from an origin PE, an identifier of a target device, a stack frame of the origin PE, and an address of a function called from the origin PE. The supervisor PE allocates a target PE of the target device. The supervisor PE copies the stack frame of the origin PE to a new stack frame on a call stack of the target PE. The supervisor PE instructs the target PE to execute the function. The supervisor PE receives a notification that execution of the function is complete. The supervisor PE copies the stack frame of the target PE to the stack frame of the origin PE. The supervisor PE releases the target PE of the target device. The supervisor PE instructs the origin PE to resume execution of the program.

97 MATHEMATICS AND COMPUTING↗