Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thermodynamic assessment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Deuterated water as a substrate-agnostic isotope tracer for investigating reversibility and thermodynamics of reactions in central carbon metabolism

Stable isotope tracers are a powerful tool for the quantitative analysis of microbial metabolism, enabling pathway elucidation, metabolic flux quantification, and assessment of reaction and pathway thermodynamics. 13 C and 2 H metabolic flux analysis commonly relies on isotopically labeled carbon substrates, such as glucose. However, the use of 2 H-labeled nutrient substrates faces limitations due to their high cost and limited availability in comparison to 13 C-tracers. Furthermore, isotope tracer studies in industrially relevant bacteria that metabolize complex substrates such as cellulose, hemicellulose, or lignocellulosic biomass, are challenging given the difficulty in obtaining these as isotopically labeled substrates. In this study, we examine the potential of deuterated water ( 2 H 2 O) as an affordable, substrate-neutral isotope tracer for studying central carbon metabolism. We apply 2 H 2 O labeling to investigate the reversibility of glycolytic reactions across three industrially relevant bacterial species -C. thermocellum, Z. mobilis, and E. coli-harboring distinct glycolytic pathways with unique thermodynamics. We demonstrate that 2 H 2 O labeling recapitulates previous reversibility and thermodynamic findings obtained with established 13 C and 2 H labeled nutrient substrates. Furthermore, we exemplify the utility of this 2 H 2 O labeling approach by applying it to high-substrate C. thermocellum fermentations -a setting in which the use of conventional tracers is impractical-thereby identifying the glycolytic enzyme phosphofructokinase as a major bottleneck during high-substrate fermentations and unveiling critical insights that will steer future engineering efforts to enhance ethanol production in this cellulolytic organism. This study demonstrates the utility of deuterated water as a substrate-agnostic isotope tracer for examining flux and reversibility of central carbon metabolic reactions, which yields biological insights comparable to those obtained using costly 2 H-labeled nutrient substrates.

09 BIOMASS FUELS↗
DOE OSTI2022

Lamellae of α phase in a metastable β -Ti alloy studied by small-angle x-ray scattering

The shapes and orientations of lamellae of the hexagonal close-packed α phase in single crystals of the body-centred cubic β phase in a metastable β -Ti alloy (Timetal LCB) were investigated by synchrotron small-angle x-ray scattering. Several steps of thermal treatment with various annealing times and temperatures were employed. The measured scattering data were fitted to a model of ellipsoidal lamellae of random sizes, and the mean lamella shapes and orientations of their axes with respect to the β -Ti matrix were determined from the fit. The number and relative volume of the lamellae were estimated from the integrated scattered intensity. The elastic energy of the lamellae as well as the energy of defects at the α / β interface (misfit dislocations) were calculated from the parameters of the lamellae. In conclusion, the results provide information on the kinetics of the β $ \rightarrow$ α transformation in metastable β -Ti alloys and allow assessing the degree of thermodynamic equilibrium of the final α / β composite.

36 MATERIALS SCIENCE↗
DOE OSTI2021

CIGS photovoltaics: reviewing an evolving paradigm

Copper indium selenide chalcopyrite-structure alloys with gallium (CIGS) are unique among the highest performing photovoltaic (PV) semiconductor technologies. They are structurally disordered, nonstoichiometric materials that have been engineered to achieve remarkably low bulk nonradiative recombination levels. Nevertheless, their performance can be further improved. This review adopts a fundamental thermodynamic perspective to comparatively assess the root causes of present limitations on CIGS PV performance. The topics of selectivity and passivation of contacts to CIGS and its multinary alloys are covered, highlighting pathways to maximizing the electrochemical potential between those contacts under illumination. Further, an overview of absorber growth methods and resulting properties is also provided. We recommend that CIGS researchers consider strategies that have been successfully implemented in the more mature wafer-based GaAs and Si PV device technologies, based on the paradigm of an idealized PV device design using an isotropic absorber with minimal nonradiative recombination, maximal light trapping, and both electron-selective and hole-selective passivated contacts. We foresee that CIGS technology will reach the 25% efficiency level within the next few years through enhanced collection and reduced recombination. To significantly impact power-generation applications, cost-effective, manufacturable solutions are also essential.

14 SOLAR ENERGY↗
DOE OSTI2020

Impact of a New Sea Ice Thermodynamic Formulation in the CESM2 Sea Ice Component

Abstract The sea ice component of the Community Earth System Model version 2 (CESM2) contains new “mushy‐layer” physics that simulates prognostic salinity in the sea ice, with consequent modifications to sea ice thermodynamics and the treatment of melt ponds. The changes to the sea ice model and their influence on coupled model simulations are described here. Two simulations were performed to assess the changes in the vertical thermodynamics formulation with prognostic salinity compared to a constant salinity profile. Inclusion of the mushy layer thermodynamics of Turner et al. (2013, https://doi.org/10.1002/jgrc.20171 ) in a fully coupled Earth system model produces thicker and more extensive sea ice in the Arctic, with relatively unchanged sea ice in the Antarctic compared to simulations using a constant salinity profile. While this is consistent with the findings of uncoupled ice‐ocean model studies, the role of the frazil and congelation growth is more important in fully coupled simulations. Melt pond drainage is also an important contribution to simulated ice thickness differences as also found in the uncoupled simulations of Turner and Hunke (2015; https://doi.org/10.1002/2014JC010358 ). However, it is an interaction of the ponds and the snow fraction that impacts the surface albedo and hence the top melt. The changes in the thermodynamics and resulting ice state modify the ice‐ocean‐atmosphere fluxes with impacts on the atmosphere and ocean states, particularly temperature.

Bailey, David A.↗
DOE OSTI2020

Garcinoic Acid Is a Natural and Selective Agonist of Pregnane X Receptor

Pregnane X receptor (PXR) is a master xenobiotic-sensing transcription factor and a validated target for immune and inflammatory diseases. The identification of chemical probes to investigate the therapeutic relevance of the receptor is still highly desired. In fact, currently available PXR ligands are not highly selective and can exhibit toxicity and/or potential off-target effects. In this study, we have identified garcinoic acid as a selective and efficient PXR agonist. The properties of this natural molecule as a specific PXR agonist were demonstrated by the screening on a panel of nuclear receptors, the assessment of the physical and thermodynamic binding affinity, and the determination of the PXR-garcinoic acid complex crystal structure. Cytotoxicity, transcriptional, and functional properties were investigated in human liver cells, and compound activity and target engagement were confirmed in vivo in mouse liver and gut tissue. In conclusion, garcinoic acid is a selective natural agonist of PXR and a promising lead compound toward the development of new PXR-regulating modulators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Molecular beam epitaxy growth of IrO 2 using plasma-only oxidation

Growth of IrO 2 films via molecular beam epitaxy (MBE) using an oxygen plasma as the sole oxidant is demonstrated for the first time. We investigate the oxidizing conditions required for IrO 2 by characterizing the species present in the plasma using optical emission spectroscopy and comparing the thermodynamic equilibrium between Ir/IrO 2 under atomic and molecular oxygen. Across the pressure range accessible, monatomic oxygen was the primary reactive species present in the plasma. IrO 2 films were grown under varying Ir flux, oxygen pressure, and substrate temperature to understand growth thermodynamics and kinetics. Structural characterization assessed film phase and composition, crystallinity, strain, and surface morphology. The optimized films from this study validate plasma-only reactive growth by MBE as a successful method for growing IrO 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Engineering Evaluation of Barium Buildup in a Decayed CsCl Sealed Source and Potential Impact for Cesium Release from a Breached Source

For more than 50 years, radioactive 137 Cs has been a major source material for radioactive sealed sources, usually constructed as cesium chloride (CsCl) salt loaded into double-walled, stainless-steel capsules. A complication develops as 137 Cs decays to 137 Ba since this process creates a strongly reducing environment inside the capsule. A potential hazard exists if the capsule is breached and air ingress induces rapid exothermic oxidation, and this mechanism is suspected to be responsible for the well-known contamination incident at the Harbor View facility in Washington state. For this study, many thermodynamic evaluations were performed to assess the internal state of capsules after several decades of decay and to describe the potential oxidation if the capsule contents were to suddenly be exposed to air. Results suggest that reduction of impurities such as Cu, Fe, Pb, and Cr to metal will occur. If these impurities are lacking, it is possible that even Ba metal will form. In most cases, rapid oxidation can occur, and the exothermic reactions are sufficient to vaporize portions of the contents, which would include the remaining 137 Cs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Modeling Radionuclide Vaporization from Sodium Pools for SFR Mechanistic Source Term Analysis

To assist both the advanced reactor industry and U.S. Nuclear Regulatory Commission (NRC) in the pursuit of reactor design and licensing, the U.S. Department of Energy (DOE) Nuclear Energy Advanced Modeling and Simulation (NEAMS) program has established a mechanistic source term (MST) research project under the Multiphysics Applications technical area. As part of this effort, an MST mod/sim development pathway was developed in FY21 under the NEAMS program, which outlines the high-level objectives and near-term tasks necessary to achieve the project objectives. One such recommended task was the assessment of a previously developed thermodynamic database to model radionuclide vaporization from liquid sodium pools (specifically in the context of MST analyses), which is the focus of this topic report. As such, a thermodynamic database was created in FactSage for liquid sodium pools containing oxygen and relevant elements which represent radionuclides pertinent to MST analyses. The database was demonstrated in calculating vapor fraction curves for each element in the system at concentrations relevant to SFR MST.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Methodology for Thermodynamic Analysis Coupled with Computational Fluid Dynamics Modeling for Casting a Novel Aluminum–Cerium Alloy

In this paper, we present the results of computational fluid dynamics (CFD) analysis to assess castability, porosity, molten metal fluidity and other technological properties of a new Al-Ce alloy. A thermodynamic analysis of a new Al-Ce alloy is done to obtain the physical properties as a function of temperature across both solid and liquid phases. These properties are then used to build the CFD of model the full casting process from initial pouring through to final solidification of the part, here an example of a heavy duty mor mount is used. While several excellent commercial CFD codes exists this process shows that CFD can be used to assess the capability of the alloy to properly fill the mold, as well as give predictions where scattered porosity or large-scale defects may occur in the casting. Further, unlike the commercially available software (e.g., ProCAST, SOLIDCast , MAGMASOFT®) the complex 3D-analysis of the stress / strain fields in cast parts is not performed at this time. However, the availability of free software for assessing the required thermodynamic / thermo-physical properties of new alloys (OpenCALPHAD) and CFD codes such as OpenFOAM® makes the developed option attractive and economical, especially for the analysis of new Al-Ce alloys, for which the available data does not exist.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermochemical Modeling of Radionuclide Vapor-Liquid Equilibria in Sodium Pools for SFR Mechanistic Source Term Analysis

Mechanistic source term (MST) analysis of sodium fast reactors (SFR) requires understanding of various radionuclide (RN) transport phenomena influencing potential releases from the fuel to the environment. One such phenomenon includes the retention or release of RNs from the sodium coolant pool, representing the step after possible fuel failures and influencing transport to the cover gas region. Thermodynamic vapor-liquid equilibria (VLE) calculations were performed on systems representing SFR sodium pools containing oxygen impurities and radionuclide (RN) inventories. First, an assessment and recreation of a previously developed thermodynamic database was completed, including updates to thermodynamic parameters. The RN inventories used in VLE calculations represented hypothetical source terms that might be released to the pool during previously analyzed fuel failure scenarios. The calculations were performed for all possible combinations of sodium pool size (i.e., total oxygen) and number of failed fuel pins (i.e., total RNs). In this way, multiple ratios of the RN relative to the oxygen impurity (RN:O) were compared for their impact on RN volatility, which is discussed in terms of the vapor fraction (VF), defined as the fraction of the RN that is calculated to exist in the vapor phase at equilibrium above condensed phases of that element. Similar trends in VLE behavior are seen in the equilibrium calculation results for elements of similar chemistry, and for some element types, it was found that the RN:O ratio can be important due to oxide formation, which typically exist in the condensed phase.

Shahbazi, Shayan↗
DOE OSTI2020

Three-dimensional modeling and simulations of single-crystal and bi-crystal titanium for high-strain-rate loading conditions

High purity single crystal titanium (Ti) under shock wave loading is modeled under both one-dimensional and three-dimensional cylindrical conditions. Cylinder sizes of 10 μm and 20 μm radius are both considered in order to assess influence of boundary conditions. A thermodynamically consistent single crystal model for application to shock conditions is presented. The model accounts for the coupled non-linear elastic, dislocation slip, deformation twinning, and structural phase transformation response of the titanium material. Plate impact experiment results using a copper flyer are used to compare against the simulations for crystals oriented in [0001] and [10$\overline1$1] crystallographic directions. The one-dimensional and threedimensional simulations of the two differently oriented single crystals indicate differences between the one-dimensional and three-dimensional representation, especially for the [10$\overline1$1] oriented single crystal. This orientation breaks the relative orientation symmetry between the crystal and cylinder which otherwise exists for the [0001] oriented single crystal. A significant amount of heterogeneity in the field response of the[10$\overline1$1] oriented simulation was demonstrated due to the highly coupled nature of the deformation. A bi-crystal model composed of both the [0001] and [10$\overline1$1] orientations with the boundary between the two along the axis of the cylinder is also considered for a cylinder model size of 10 μm. The results indicate a strong interaction between the two grains that affects the ω phase volume fraction achieved relative to the single crystal calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermal Property Modeling and Assessment of the Physical Properties of FLiNaK

Here, the thermodynamic properties of the LiF–NaF–KF system and its subsystems were re-evaluated using the CALPHAD method, focusing on the deviations from ideality in the heat capacity [C p (T)] of mixtures, temperature-dependence of mixing enthalpies (Δ mix H), vapor pressures of mixtures, and enthalpies of fusion (ΔH fus ) using reported values and measurements. The results of this work confirmed a pseudoternary eutectic at 732.9 K and 46.5LiF–11.5NaF–42KF mol % (FLiNaK) with determined Cp(T) = 69.822 + 0.000679T + 2,137,152T –2 J mol –1 K –1 (732.9 < T < 1200 K) and ΔH fus = 18,051 J mol –1 in good agreement to the experimental values. The resulting accurate thermodynamic representation can be used to find relevant excess thermochemical properties in the whole pseudoternary space and provide insights into their composition and temperature dependence. A detailed evaluation of select thermophysical properties was also conducted to determine recommended density, thermal diffusivity, thermal conductivity, vapor pressures, and boiling point with calculated uncertainties over the temperature range of interest for FLiNaK–salt energy applications.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Report priority gaps in high temperature thermodynamic data (Interim Progress Report)

This interim progress report (Level 4 Milestone Number M4SF-26LL010203023) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Argillite Host Rock Properties & Processes SF-26LL01020302. Our focus is to assess gaps in data availability and understanding for radionuclide thermodynamics within the context of a “hot repository” concept and expand SUPCRT-NE database development to address higher temperatures needed for a DPC DGR disposal concept. The database is intended to inform the argillite GDSA baseline model. The leading European thermochemical database (Thermochimie) is only applicable to temperatures below 80°C. Thus, a US effort to integrate and expand upon other international thermodynamics database efforts is needed, particular if a “hot repository” concept moves forward.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

The solubility of La hydroxide and stability of La 3+ and La hydroxyl complexes at acidic to mildly acidic pH from 25 to 250 °C

The mobility of rare earth elements (REE) in natural hydrothermal systems can be assessed using geochemical modeling, which requires reliable thermodynamic data of relevant aqueous species. In this study, we evaluate the controls of pH and temperature on La speciation and the role of hydroxyl complexes in REE transport at hydrothermal conditions. Batch-type hydrothermal solubility experiments were conducted using synthetic La hydroxide powders equilibrated in perchloric acid-based aqueous solutions at temperatures between 150 and 250 °C and starting pH of 2 to 5. The La hydroxide solubility is retrograde with temperature and displays a strong pH dependence with a decrease in La concentrations from acidic to mildly acidic pH spanning between 3 and 5 orders of magnitude (e.g. log La molality of –2.5 to –7.2 at 250 °C). Thermodynamic optimizations using GEMSFITS allow to retrieve the standard partial molal Gibbs energies for the La 3+ aqua ion and the formation constants for the La hydroxyl species (i.e., LaOH 2+ , La(OH) 2 + , La(OH) 3 0 ) between 25 and 250 °C. A comparison between the experimentally derived thermodynamic properties with the calculated values from the Helgeson-Kirkham-Flowers equation of state parameters indicates an increased divergence with temperature. Discrepancies in standard partial molal Gibbs energies range between ~ 1 – 12 kJ/mol and result in a predicted La hydroxide solubility differing by up to 3 orders of magnitude at 250 °C. Speciation calculations indicate a higher stability of La 3+ and LaOH 2+ over the other La hydroxyl species in the studied pH range of 3.4 to 6. Here, the optimized thermodynamic properties for La aqueous species have important implications for modeling the solubility of REE minerals such as monazite and the mobility of REE in hydrothermal systems.

58 GEOSCIENCES↗
DOE OSTI2022

Evaluating Tropical Precipitation Relations in CMIP6 Models with ARM Data

Abstract A set of diagnostics based on simple, statistical relationships between precipitation and the thermodynamic environment in observations is implemented to assess phase 6 of the Coupled Model Intercomparison Project (CMIP6) model behavior with respect to precipitation. Observational data from the Atmospheric Radiation Measurement (ARM) permanent field observational sites are augmented with satellite observations of precipitation and temperature as an observational baseline. A robust relationship across observational datasets between column water vapor (CWV) and precipitation, in which conditionally averaged precipitation exhibits a sharp pickup at some critical CWV value, provides a useful convective onset diagnostic for climate model comparison. While a few models reproduce an appropriate precipitation pickup, most models begin their pickup at too low CWV and the increase in precipitation with increasing CWV is too weak. Convective transition statistics compiled in column relative humidity (CRH) partially compensate for model temperature biases—although imperfectly since the temperature dependence is more complex than that of column saturation. Significant errors remain in individual models and weak pickups are generally not improved. The conditional-average precipitation as a function of CRH can be decomposed into the product of the probability of raining and mean precipitation during raining times (conditional intensity). The pickup behavior is primarily dependent on the probability of raining near the transition and on the conditional intensity at higher CRH. Most models roughly capture the CRH dependence of these two factors. However, compensating biases often occur: model conditional intensity that is too low at a given CRH is compensated in part by excessive probability of precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Decoding Zeolite Crystallization and Stage III in Nuclear Waste Glasses by Coupled Modeling and Experiments

Under specific conditions of pH and temperature, nuclear waste immobilization borosilicate glasses may exhibit a sudden acceleration in their corrosion kinetics (stage III)—a behavior that has been associated with the formation of zeolite crystals. Such accelerated dissolution may compromise the integrity of nuclear wasteforms placed in geological depositories. However, thus far, none of the available models is able to predict the thermodynamic propensity and kinetics of zeolite precipitation as a function of the solution conditions due to (i) a lack of fundamental knowledge regarding the nucleation & growth mechanisms of zeolitic phases, (ii) uncertainty regarding the compositions (types) of zeolites that may form and the rate-limiting step in their precipitation as a function of the solution conditions, and (iii) the complexities that arise due to the vast parametric space (i.e., solution chemistry, temperature, number of secondary phases, etc.) that encompass these systems under conditions of environmental exposure. To resolve these challenges, this project aimed to unambiguously identify the thermodynamic propensity for zeolite precipitation and the kinetics thereof as a function of the solution conditions (composition, pH, and temperature). To achieve this goal: 1) We identified the solution conditions and zeolite phases relevant to nuclear glass dissolution. 2) We performed a series of ab initio molecular dynamics (AIMD) simulations to compute the thermodynamic properties of a group of characteristic zeolites that features a large range of compositions, various hydration levels, a wide range of framework structures, and partial atomic site occupancies. 3) We released a first-of-a-kind self-consistent thermodynamic database that can be used to assess the kinetics and the stability fields of zeolitic phases within a Gibbs energy minimization (GEM) framework. 4) We developed a robust geochemical modeling method allowing us to predict the stability of secondary phases (including zeolites, calcium–silicate–hydrate gels, and clays) upon the dissolution of nuclear waste immobilization glasses. 5) We introduced a model that predicts the dissolution kinetics of a series of borosilicate nuclear waste immobilization glasses in terms of the topology of their atomic network. 6) We investigated the roles of the solution composition on the crystallization kinetics of phillipsite zeolites and tobermorite silicate hydrates. Via PNNL’s collaboration and engagement, this project directly supports DOE’s nuclear waste immobilization activities by offering a technical, science-based foundation that will (i) facilitate predictions of the long-term corrosion rates and extents of existing nuclear waste immobilization glasses to help ensure safe and successful vitrification operations, (ii) inform the development of advanced glass formulations with enhanced durability, and, (iii) enable cost-savings that result from making more decisive and hence less conservative predictions while offering higher levels of nuclear waste embedment in smaller, more compact glass volumes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Analysis of Compressibility Effects and Nonlinear Property Variations in a Supercritical CO2 Mixing Layer

Calculations are performed using the large eddy simulation technique to qualitatively assess the effects of fluid compressibility and thermodynamic nonlinearities on the dynamics of a supercritical flow field. Resulting data are also used to interrogate instantaneous subfilter-scale fields, as modeled by the mixed-dynamic Smagorinsky closure and gradient diffusion model. A three-dimensional wall-resolved calculation of a spatially evolving mixing layer composed solely of carbon dioxide is performed. This is followed by a coarse grid calculation to examine model performance as a function of resolution. Theoretical analysis indicates that the partial derivatives of density with respect to pressure and temperature are important modulators of the temperature and pressure field evolution, respectively. Results pertaining to subfilter velocity-velocity and velocity-temperature fields indicate that the models are most stressed in the regions where compressibility and thermo-fluid nonlinearities dominate the physics.

42 ENGINEERING↗
DOE OSTI2022

Structure and thermodynamics of calcium rare earth silicate oxyapatites, Ca 2 RE 8 (SiO 4 ) 6 O 2 (RE = Pr, Tb, Ho, Tm)

Calcium rare earth silicate oxyapatites, (Ca 2 RE 8 (SiO 4 ) 6 O 2 ), are of interest as components of glass-ceramic nuclear waste forms. To assess their long-term behavior in a geologic repository, it is essential to determine their structure and thermodynamic stability at relevant conditions. Here, in this work, we performed detailed structural and thermodynamic investigations on Ca 2 Pr 8 (SiO 4 ) 6 O 2 , Ca 2 Tb 8 (SiO 4 ) 6 O 2 , Ca 2 Ho 8 (SiO 4 ) 6 O 2 , and Ca 2 Tm 8 (SiO 4 ) 6 O 2 by high energy synchrotron powder X-ray diffraction combined with Rietveld analysis and high temperature oxide melt drop solution calorimetry. Enthalpies of formation from constituent oxides (ΔH f,ox ) were determined to be -765.1 ± 22.8 kJ/mol for Ca 2 Pr 8 (SiO 4 ) 6 O 2 ; -638.9 ± 20.5 kJ/mol for Ca 2 Tb 8 (SiO 4 ) 6 O 2 ; -643.3 ± 10.3 kJ/mol for Ca 2 Ho 8 (SiO 4 ) 6 O 2 ; and -403.2 ± 5.1 kJ/mol for Ca 2 Tm 8 (SiO 4 ) 6 O 2 . These thermodynamic parameters were used in assessing the thermochemical stability of these phases in the presence of water vapor from room temperature to 600 K, as encountered in the subsurface environments of a geological repository.

36 MATERIALS SCIENCE↗