Search NASA⌕ Search

SEARCH · Search NASA

Results for “Uncorrected”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

On nonlinear effects in fracture mechanics.

Linear elastic treatment of fracture is considered applicable for net section stress up to about 0.8 the uniaxial tensile yield stress. Crack front plastic yield is still small enough to be viewed and treated as a small perturbation to the local crack front elastic stress field. Assuming these same circumstances and adopting the same point of view, an approach is presented for incorporating the nonlinear effects of small scale crack front plastic yield and slow crack extension in determination of the energy release rate and fracture toughness. Deviation from linearity of the load-displacement record in a fracture toughness test offers a quantifiable measure of these effects and is used to calculate the energy release rate. Fracture toughness values for one-eight inch thick 7075-T6 center cracked aluminum sheet are compared with uncorrected values and with values obtained by the Irwin method of plasticity correction.

Liebowitz, H.↗
NASA NTRS1973

Investigation to develop a multistage forest sampling inventory system using ERTS-1 imagery

The author has identified the following significant results. Two strips of U-2 RC-10 images were analytically triangulated and adjusted. Control points and pass points were marked on glass plates made from B&W copy negatives of IR color transparencies. A wild PUG-3 and TA1/p monocomparator were used to mark and measure the points on the glass plates. Each plate was measured twice in the same orientation for a check on accuracy and operator error. The 22 photographs were adjusted to 41 ground control and tie points and the block adjustment was performed in a secant plane coordinate system to eliminate the effect of earth curvature. Standard deviations of the residuals of the control and tie points were 12.8 m, 10.8 m, and 4.5 m for the X, Y, and Z coordinates respectively. The 12.8 m and 10.8 m figures correspond to an identification accuracy of 0.1 mm on the U-2 RC-10 plates. The standard deviations of the residuals encountered in the ERTS-1 resectioning were: (1) 0.16 mm assuming uncorrected perspective geometry and (2) 0.12 mm when the polynomial adjustment was added in. These results indicate a reduction of 0.11 in the square error due to the polynomial adjustment.

Langley, P. G.↗
NASA NTRS1973

Photogrammetric evaluation of Mariner 9 photography

Some attempts to produce, with an AP/C analytical plotter, stereo models using Mariner 9 pictures are reported. The first attempt using geometrically uncorrected mission test video system (MTVS) imagery failed; the second, using corrected reduced data record (RDR) pictures also failed, probably because they were reconstructed through a vidicon display which introduces additional distortion. By using images obtained from RDR tape data through the Optronics Photowrite device, models were successfully obtained.

Wu, S. S. C.↗
NASA NTRS1973

Analysis of aircraft microwave measurements of the ocean surface

A data system was developed to process, from calibrated brightness temperature to computation of estimated parameters, the microwave measurements obtained by the NASA CV-990 aircraft during the 1972 Meteorological Expedition. A primary objective of the study was the implementation of an integrated software system at the computing facility of NASA/GSFC, and its application to the 1972 data. A single test case involving measurements away from and over a heavy rain cell was chosen to examine the effect of clouds upon the ability to infer ocean surface parameters. The results indicate substantial agreement with those of the theoretical study; namely, that the values obtained for the surface properties are consistent with available ground-truth information, and are reproducible except within the heaviest portions of the rain cell, at which nonlinear (or saturation) effects become apparent. Finally, it is seen that uncorrected instrumental effects introduce systematic errors which may limit the accuracy of the method.

Willand, J. H.↗
NASA NTRS1974

The effect of wind tunnel wall interference on the performance of a fan-in-wing VTOL model

A fan-in-wing model with a 1.07-meter span was tested in seven different test sections with cross-sectional areas ranging from 2.2 sq meters to 265 sq meters. The data from the different test sections are compared both with and without correction for wall interference. The results demonstrate that extreme care must be used in interpreting uncorrected VTOL data since the wall interference may be so large as to invalidate even trends in the data. The wall interference is particularly large at the tail, a result which is in agreement with recently published comparisons of flight and large scale wind tunnel data for a propeller-driven deflected-slipstream configuration. The data verify the wall-interference theory even under conditions of extreme interference. A method yields reasonable estimates for the onset of Rae's minimum-speed limit. The rules for choosing model sizes to produce negligible wall effects are considerably in error and permit the use of excessively large models.

Heyson, H. H.↗
NASA NTRS1974

Automated land-use mapping from spacecraft data

The author has identified the following significant results. In response to the need for a faster, more economical means of producing land use maps, this study evaluated the suitability of using ERTS-1 computer compatible tape (CCT) data as a basis for automatic mapping. Significant findings are: (1) automatic classification accuracy greater than 90% is achieved on categories of deep and shallow water, tended grass, rangeland, extractive (bare earth), urban, forest land, and nonforested wet lands; (2) computer-generated printouts by target class provide a quantitative measure of land use; and (3) the generation of map overlays showing land use from ERTS-1 CCTs offers a significant breakthrough in the rate at which land use maps are generated. Rather than uncorrected classified imagery or computer line printer outputs, the processing results in geometrically-corrected computer-driven pen drawing of land categories, drawn on a transparent material at a scale specified by the operator. These map overlays are economically produced and provide an efficient means of rapidly updating maps showing land use.

Chase, P. E.↗
NASA NTRS1974

A system to geometrically rectify and map airborne scanner imagery and to estimate ground area

A system of computer programs were developed which performs geometric rectification and line-by-line mapping of airborne multispectral scanner data to ground coordinates and estimates ground area. The system requires aircraft attitude and positional information furnished by ancillary aircraft equipment, as well as ground control points. The geometric correction and mapping procedure locates the scan lines, or the pixels on each line, in terms of map grid coordinates. The area estimation procedure gives ground area for each pixel or for a predesignated parcel specified in map grid coordinates. The results of exercising the system with simulated data showed the uncorrected video and corrected imagery and produced area estimates accurate to better than 99.7%.

Spencer, M. M.↗
NASA NTRS1973

Excitation of CO2/+/ by electron impact on CO2

Consideration of a discrepancy concerning the correct value of the cross section for excitation of the CO2(+) B state by electron impact on CO2. It is suggested that the reason for the disparate results obtained by various authors for the B state can be traced to a calibration error due to scattered light. In particular, the tungsten filament lamps used in the experiments cited have very low intensity at wavelengths below 3000 A where the B state emissions occur, so that even a small amount of scattered light in the spectrometer will produce a large error in the measured cross section. In a remeasurement of the cross section for excitation of the B state at an energy of 150 eV it was found that at 2900 A the scattered light signal, if uncorrected for, would introduce an error of about 50%.

Mentall, J. E.↗
NASA NTRS1974

Implementation of an experimental program to investigate the performance characteristics of OMEGA navigation

A theoretical formulation of differential and composite OMEGA error is presented to establish hypotheses about the functional relationships between various parameters and OMEGA navigational errors. Computer software developed to provide for extensive statistical analysis of the phase data is described. Results from the regression analysis used to conduct parameter sensitivity studies on differential OMEGA error tend to validate the theoretically based hypothesis concerning the relationship between uncorrected differential OMEGA error and receiver separation range and azimuth. Limited results of measurement of receiver repeatability error and line of position measurement error are also presented.

Baxa, E. G., Jr.↗
NASA NTRS1974

SICLOPS - A system of computer programs for rectified mapping of airborne scanner imagery

This paper describes SICLOPS, a system of computer programs, which has been developed to perform geometrically corrected line-by-line mapping of airborne multispectral scanner data to ground coordinates and to estimate ground areas. As inputs, SICLOPS accepts aircraft attitude and positional information furnished by ancillary aircraft equipment, plus ground truth information giving the location, in map grid coordinates, of a number of recognizable landmarks on the ground. The geometric correction and mapping procedure locates the scan lines, or the pixels on each line, in terms of map grid coordinates. The area estimation procedure gives ground area for each pixel or for a predesignated parcel specified in map grid coordinates. The results of exercising the system with simulated data showed the uncorrected video and corrected imagery and produced area estimates accurate to better than 99.7%. Real input data, though prepared, have not yet been processed by the system.

Spencer, M. M.↗
NASA NTRS1975

Remote sensing applications in water resources management by the California Department of Water Resources

The possibility of applying imagery from high altitude aircraft and satellites sensors to water management in California was evaluated. Results from seven applications studies comparing the costs of using high altitude imagery for various purposes to the costs of using conventional data sources, reveal the high altitude imagery to be more cost effective in six cases and equal to conventional data sources in one case. These results also reveal that the imagery provides a level of quality not generally achievable with uncorrected conventional imagery. Although satellite application studies are not yet complete, preliminary results indicate that some definite possibilities exist for employing satellite imagery on an operational basis within the next few years.

Brown, B.↗
NASA NTRS1974

Analysis of the wind tunnel test of a tilt rotor power force model

Two series of wind tunnel tests were made to determine performance, stability and control, and rotor wake interaction on the airframe, using a one-tenth scale powered force model of a tilt rotor aircraft. Testing covered hover (IGE/OCE), helicopter, conversion, and airplane flight configurations. Forces and moments were recorded for the model from predetermined trim attitudes. Control positions were adjusted to trim flight (one-g lift, pitching moment and drag zero) within the uncorrected test data balance accuracy. Pitch and yaw sweeps were made about the trim attitudes with the control held at the trimmed settings to determine the static stability characteristics. Tail on, tail off, rotors on, and rotors off configurations were testes to determine the rotor wake effects on the empennage. Results are presented and discussed.

Marr, R. L.↗
NASA NTRS1976

Wide angle lenses with aspheric correcting surfaces

Refracting elements having aspheric correcting surfaces near the center of curvature are analyzed. As in the case of the Schmidt reflector, such systems can have a wide aperture and a wide field of view; in addition, they are free from obstructing surfaces. Being uncorrected for dispersion, however, the refracting systems are restricted to nearly monochromatic radiation. Typical forms of the correcting surfaces have been determined, both by third order theory and by numerical integration of exact equations.

Jones, R. T.↗
NASA NTRS1976

Comet brightness parameters: Definition, determination, and correlations

The power-law definition of comet brightness is reviewed and possible systematic influences are discussed that can affect the derivation of m sub o and n values from visual magnitude estimates. A rationale for the Bobrovnikoff aperture correction method is given and it is demonstrated that the Beyer extrafocal method leads to large systematic effects which if uncorrected by an instrumental relationship result in values significantly higher than those derived according to the Bobrovnikoff guidelines. A series of visual brightness parameter sets are presented which have been reduced to the same photometric system. Recommendations are given to insure that future observations are reduced to the same system.

Meisel, D. D.↗
NASA NTRS1975

ANS results on X-ray binaries

A short description is given of the Astronomical Netherlands Satellite ANS and the X-ray instruments of the Space Research Laboratory in Utrecht. ANS observed in February 1975 a soft _ KeV) X-ray flux in Her-x-I during the 'off'-state with an intensity of a factor I0 lower than observed previously in the 'on'-state. The measured uncorrected intensity is (1.1 ± 0.2)10^(-11) ergs/sq.cm sec in 0.2 - 0.28 keV at earth. The ANS observations on Cyg-X-I are summarized. Duping the May 75 flaring state a very high intensity at 0.5 keV is measured consistent with a power-law Ph0ton-spectrum with index 3.5 and an interstellar absorption of 7.10^(21) atoms/sq.cm, but not consistent with spectra that show an additional cut-off below 1KeV and an absorption of 7 10^(21) atoms/sq.cm. Intensity changes on a time scale of minutes, as observed in Cyg-X-1 lowstate, are not observed during the flaring state.

J. Heise↗
NASA NTRS1976

Focal properties of geodesic waveguide lenses

The focal properties of uncorrected geodesic lenses in ion-exchanged glass waveguides are reported. A 13.8-mm-focal-length lens resolved beams with an angular separation of 27.6 mrad, while a 28-mm-focal-length lens resolved beams with an angular separation of only 3.3 mrad. Intensity profiles of the focal region of the former lens revealed a 40-micron spot size when the input aperture was 5 mm, and a spot size of 7.7 microns when the aperture was reduced to 1 mm. This value is close to the diffraction-limited spot size of 5.7 microns.

Verber, C. M.↗
NASA NTRS1976

Maneuver sequence design for the post-Jupiter leg of Pioneer Saturn

After passing the planet Jupiter in December 1974, Pioneer 11 is on a flight path on which it will encounter Saturn in late 1979. Following an uncorrected trajectory, the spacecraft would pass 2 million km behind Saturn. A sequence of midcourse maneuvers for modifying the Pioneer trajectory is discussed. The corrected flight path is to bring the spacecraft within 500,000 km of Saturn's satellite Titan. Attention is given to maneuver capabilities and constraints, the maneuver design concept, questions related to the selection of an interim aimpoint, and aspects of maneuver implementation.

Frauenholz, R. B.↗
NASA NTRS1976

Testing thinned, backside illuminated CCD area image sensors

Test techniques were developed making use of computer processing of the video data. The results of testing device noise and nonuniformity were obtained. Read-out noise levels of 25 to 50 electrons rms and uncorrected nonuniformity of response of about 1 to 3% were measured. A simple technique for linearly correcting nonuniformity was described and examples given. The technique was shown to be successful in reducing nonuniformity to the level of random noise.

Root, G.↗