Results for “digital circuits designs” — Page 5

NASA NTRS1983

Flight test validation of a design procedure for digital autopilots

Commercially available general aviation autopilots are currently in transition from an analogue circuit system to a computer implemented digital flight control system. Well known advantages of the digital autopilot include enhanced modes, self-test capacity, fault detection, and greater computational capacity. A digital autopilot's computational capacity can be used to full advantage by increasing the sophistication of the digital autopilot's chief function, stability and control. NASA's Langley Research Center has been pursuing the development of direct digital design tools for aircraft stabilization systems for several years. This effort has most recently been directed towards the development and realization of multi-mode digital autopilots for GA aircraft, conducted under a SPIFR-related program called the General Aviation Terminal Operations Research (GATOR) Program. This presentation focuses on the implementation and testing of a candidate multi-mode autopilot designed using these newly developed tools.

Bryant, W. H.↗

NASA NTRS1992

Miniature X-band GaAs MMIC analog and bi-phase modulators for spaceborne communications applications

The design concepts, analyses, and the development of GaAs monolithic microwave integrated circuit (MMIC) linear-phase and digital modulators for the next generation of spaceborne communications systems are summarized. The design approach uses a very compact lumped-element, quadrature hybrid, and MESFET-varactors to provide low-loss and well-controlled phase performance for deep-space transponder (DST) applications. The measured results of the MESFET-diode show a capacitance range of 2:1 under reverse bias, and a Q of 38 at 10 GHz. Three cascaded sections of hybrid-coupled reflection phase shifters have been modeled and simulations performed to provide an X-band (8415 +/- 50 MHz) DST phase modulator with +/-2.5 radians of peak phase deviation.

Mysoor, Narayan R.↗

NASA NTRS2009

"Glitch Logic" and Applications to Computing and Information Security

This paper introduces a new method of information processing in digital systems, and discusses its potential benefits to computing and information security. The new method exploits glitches caused by delays in logic circuits for carrying and processing information. Glitch processing is hidden to conventional logic analyses and undetectable by traditional reverse engineering techniques. It enables the creation of new logic design methods that allow for an additional controllable "glitch logic" processing layer embedded into a conventional synchronous digital circuits as a hidden/covert information flow channel. The combination of synchronous logic with specific glitch logic design acting as an additional computing channel reduces the number of equivalent logic designs resulting from synthesis, thus implicitly reducing the possibility of modification and/or tampering with the design. The hidden information channel produced by the glitch logic can be used: 1) for covert computing/communication, 2) to prevent reverse engineering, tampering, and alteration of design, and 3) to act as a channel for information infiltration/exfiltration and propagation of viruses/spyware/Trojan horses.

hardware vulnerabilities↗

NASA NTRS1996

Stackable Electronic Computer Modules And Interconnections

Design concept for multiprocessor computer system calls for digital electronic processing circuits of various functionalities contained within identically shaped and sized regular polygonal modules interconnected and stacked by use of rings around edges. Rings contain wide-band bus circuits configured to provide connections to adjacent modules in same layer of stack and/or to modules in different layers. Provides flexibility of configuration to implement any of large variety of designs.

Bolotin, Gary S.↗

NASA NTRS1972

A very high speed hard decision sequential decoder.

Description of a 40-Mbps hard-decision sequential decoder for high-data-rate coding systems for earth-orbiting space missions with power-limited links. A prototype decoder has been designed and fabricated using the fastest commercially available digital integrated circuits, MECL III. Thus far, an internal computational rate of 70 million computations per second has been achieved. Computational efficiency of the decoding algorithm was greatly improved by incorporating two modifications to the Fano algorithm - 'double quick threshold loosening' and 'diagonal steps.' Preliminary results indicate that an output error rate of 0.00001 can be achieved with E sub b/N sub zero less than 5.4 dB at data rates up to 40 Mbps. At lower data rates, even less signal energy is required. This decoder is believed to be at least five times faster than any previous sequential decoder.

Gilhousen, K. S.↗

NASA NTRS1999

Analog Module Architecture for Space-Qualified Field-Programmable Mixed-Signal Arrays

Spacecraft require all manner of both digital and analog circuits. Onboard digital systems are constructed almost exclusively from field-programmable gate array (FPGA) circuits providing numerous advantages over discrete design including high integration density, high reliability, fast turn-around design cycle time, lower mass, volume, and power consumption, and lower parts acquisition and flight qualification costs. Analog and mixed-signal circuits perform tasks ranging from housekeeping to signal conditioning and processing. These circuits are painstakingly designed and built using discrete components due to a lack of options for field-programmability. FPAA (Field-Programmable Analog Array) and FPMA (Field-Programmable Mixed-signal Array) parts exist but not in radiation-tolerant technology and not necessarily in an architecture optimal for the design of analog circuits for spaceflight applications. This paper outlines an architecture proposed for an FPAA fabricated in an existing commercial digital CMOS process used to make radiation-tolerant antifuse-based FPGA devices. The primary concerns are the impact of the technology and the overall array architecture on the flexibility of programming, the bandwidth available for high-speed analog circuits, and the accuracy of the components for high-performance applications.

Edwards, R. Timothy↗

NASA NTRS2005

Transistor Level Circuit Experiments using Evolvable Hardware

The Jet Propulsion Laboratory (JPL) performs research in fault tolerant, long life, and space survivable electronics for the National Aeronautics and Space Administration (NASA). With that focus, JPL has been involved in Evolvable Hardware (EHW) technology research for the past several years. We have advanced the technology not only by simulation and evolution experiments, but also by designing, fabricating, and evolving a variety of transistor-based analog and digital circuits at the chip level. EHW refers to self-configuration of electronic hardware by evolutionary/genetic search mechanisms, thereby maintaining existing functionality in the presence of degradations due to aging, temperature, and radiation. In addition, EHW has the capability to reconfigure itself for new functionality when required for mission changes or encountered opportunities. Evolution experiments are performed using a genetic algorithm running on a DSP as the reconfiguration mechanism and controlling the evolvable hardware mounted on a self-contained circuit board. Rapid reconfiguration allows convergence to circuit solutions in the order of seconds. The paper illustrates hardware evolution results of electronic circuits and their ability to perform under 230 C temperature as well as radiations of up to 250 kRad.

self configuration↗

NASA NTRS2006

Miniature Housings for Electronics With Standard Interfaces

A family of general-purpose miniature housings has been designed to contain diverse sensors, actuators, and drive circuits plus associated digital electronic readout and control circuits. The circuits contained in the housings communicate with the external world via standard RS-485 interfaces.

Howard, David E.↗

NASA NTRS1996

Interface Circuit For Connecting Instruments To Computers

Circuit card designed to act as interface between K-bus remote terminal. Enables digital communication between electronic instrumentation designed to communicate with other equipment via K-bus and control and telemetry-monitoring computer designed to communicate with other equipment via MIL-STD-1553B (or MIL-STD-1773) bus. Provides K-bus interface for as many as four instrumentation circuit cards.

Katz, Richard B.↗

NASA NTRS1994

Optoelectronic Receiver For Communication And Control

Many operational and diagnostic features integrated into circuit chip. GaAs-based integrated circuit designed to serve as optoelectronic interface in phased-array antenna. Intended function to receive digital control signals transmitted on optical fiber and to convert signals to electronic control signals, which then applied to monolithic microwave integrated circuit (MMIC). Also used in reception of high-rate optical digital communications within computers, between computers, and in signal-distribution systems in aircraft, automobiles, and ships. Interface circuit represents significant improvement over preexisting interface circuits in that its clock-signal-recovery subcircuit requires little or no preamble for immediate synchronization.

Kunath, Richard↗

NASA NTRS1982

Design approach for a microprocessor-based GPS time transfer receiver

The design concept and characteristics of a self-contained microprocessor-based Global Positioning System time transfer receiver is described. A prototype of this unit is currently in the test phase. It employs two-bit digital baseband correlation rather than analog IF correlation of the signals with the reference code. The correlator, numerically controlled oscillators and code generator are implemented in a special-purpose digital signal processor. The time is recovered in the digital code tracking loop, and final corrections are applied in the control processor. Other features of this design are: (1) drift-free digital mechanization; (2) high reliability of digital circuits; (3) flexible control capability of the microprocessor; and (4) potential for a high degree of digital VLSI chip development leading to compact, low-cost units.

Ould, P. C.↗

NASA NTRS1988

Closed-Loop Optical Rotation Sensor

Optical/electronic system senses rotation and emits pulses at angular increments. System provides linear scale factor across wide range of rotation rates with no lockup at null. Design needs analog-to-digital converters with elaborate signal-processing circuits. Light from laser diode split evenly into two beams propagating in opposite directions around rotation-sensing coil of optical-fiber waveguide. Beams acquire phase difference proportional to rotation rate as they pass through coil. After emerging from coil, beams recombine in beam splitter, and coherent sum led to photodiode.

Goss, Willis C.↗

NASA NTRS1990

Fiber optic and laser sensors VII; Proceedings of the Meeting, Boston, MA, Sept. 5-7, 1989

Various papers on fiber optic and laser sensors are presented. Individual topics addressed include: fiber optic photoelastic pressure sensor for high-temperature gases, fiber optic gyroscope using an eight-component LiNbO3 integrated optic circuit, design and performance of a fiber optic gyroscope using integrated optics, digital angular position sensor using wavelength division multiplexing, simple repeatable fiber optic intensity sensor for temperature measurement, compensation for effects of ambient temperature on rare-earth-doped fiber optic thermometer.

Udd, Eric↗

NASA NTRS2010

Use of a Frequency Divider to Evaluate an SOI NAND Gate Device, Type CHT-7400, for Wide Temperature Applications

Frequency dividers constitute essential elements in designing phase-locked loop circuits and microwave systems. In addition, they are used in providing required clocking signals to microprocessors and can be utilized as digital counters. In some applications, particularly space missions, electronics are often exposed to extreme temperature conditions. Therefore, it is required that circuits designed for such applications incorporate electronic parts and devices that can tolerate and operate efficiently in harsh temperature environments. While present electronic circuits employ COTS (commercial-off- the-shelf) parts that necessitate and are supported with some form of thermal control systems to maintain adequate temperature for proper operation, it is highly desirable and beneficial if the thermal conditioning elements are eliminated. Amongst these benefits are: simpler system design, reduced weight and size, improved reliability, simpler maintenance, and reduced cost. Devices based on silicon-on-insulator (SOI) technology, which utilizes the addition of an insulation layer in the device structure to reduce leakage currents and to minimize parasitic junctions, are well suited for high temperatures due to reduced internal heating as compared to the conventional silicon devices, and less power consumption. In addition, SOI electronic integrated circuits display good tolerance to radiation by virtue of introducing barriers or lengthening the path for penetrating particles and/or providing a region for trapping incident ionization. The benefits of these parts make them suitable for use in deep space and planetary exploration missions where extreme temperatures and radiation are encountered. Although designed for high temperatures, very little data exist on the operation of SOI devices and circuits at cryogenic temperatures. In this work, the performance of a divide-by-two frequency divider circuit built using COTS SOI logic gates was evaluated over a wide temperature range and thermal cycling to determine suitability for use in space exploration missions and terrestrial fields under extreme temperature conditions.

Patterson, Richard L.↗

NASA NTRSDate not supplied

Recent Progress in Extreme Environment Durable SiC JFET-R Integrated Circuit Technology

This work updates recent progress made by NASA Glenn Research Center on further advancement of its uniquely durable silicon carbide junction field effect transistor and resistor (SiC JFET-R) integrated circuit (IC) technology since HiTEC 2021. Key fabrication process improvements compared to earlier NASA Glenn IC prototype runs have been ascertained via extensive “back end of line” (BEOL) processing experiments conducted on practice wafers over the past two years. The resulting changes to the BEOL process flow employed in the fabrication of “Generation 12” SiC JFET-R wafers are described. The NASA Glenn SiC JFET-R IC prototype “Generation 12” chipset design realizes significantly higher complexity digital and analog integrated ICs aimed at flexibly implementing a broad variety of mission-enabling extreme-environment electronics demonstrations. SPICE simulations have verified circuit designs ranging from simple amplification of analog sensor signals up through long-duration Venus lander operations and microprocessor-based of electric motor drive.

Silicon Carbide↗

NASA NTRSDate not supplied

Recent Progress in Extreme Environment Durable SiC JFET-R Integrated Circuit Technology

This work updates recent progress made by NASA Glenn Research Center on further advancement of its uniquely durable silicon carbide junction field effect transistor and resistor (SiC JFET-R) integrated circuit (IC) technology since HiTEC 2021. Key fabrication process improvements compared to earlier NASA Glenn IC prototype runs have been ascertained via extensive “back end of line” (BEOL) processing experiments conducted on practice wafers over the past two years. The resulting changes to the BEOL process flow employed in the fabrication of “Generation 12” SiC JFET-R wafers are described. The NASA Glenn SiC JFET-R IC prototype “Generation 12” chipset design realizes significantly higher complexity digital and analog integrated ICs aimed at flexibly implementing a broad variety of mission-enabling extreme-environment electronics demonstrations. SPICE simulations have verified circuit designs ranging from simple amplification of analog sensor signals up through long-duration Venus lander operations and microprocessor-based of electric motor drive.

Silicon Carbide↗

NASA NTRS2023

Recent Progress in Extreme Environment Durable SiC JFET-R Integrated Circuit Technology

This work updates recent progress made by NASA Glenn Research Center on further advancement of its uniquely durable silicon carbide junction field effect transistor and resistor (SiC JFET-R) integrated circuit (IC) technology since HiTEC 2021. Key fabrication process improvements compared to earlier NASA Glenn IC prototype runs have been ascertained via extensive “back end of line” (BEOL) processing experiments conducted on practice wafers over the past two years. The resulting changes to the BEOL process flow employed in the fabrication of “Generation 12” SiC JFET-R wafers are described. The NASA Glenn SiC JFET-R IC prototype “Generation 12” chipset design realizes significantly higher complexity digital and analog integrated ICs aimed at flexibly implementing a broad variety of mission-enabling extreme-environment electronics demonstrations. SPICE simulations have verified circuit designs ranging from simple amplification of analog sensor signals up through long-duration Venus lander operations and microprocessor-based of electric motor drive.

Silicon Carbide↗

NASA NTRS1983

GaAs integrated digital-to-analogue convertor for control of power dual-gate FETs

The design, fabrication and performance of a TTL compatible 4-bit GaAs integrated digital-to-analog convertor with an output voltage between -2.8 V and +2.8 V are reported. This circuit has been especially designed to control the gain of power dual-gate FETs by applying a voltage on the capacitively terminated second gate.

Saunier, P.↗