Search NASA⌕ Search

SEARCH · Search NASA

Results for “performance measures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Benchmark Analysis

Tremendous progress has been achieved in the development of land models and their inclusion in Earth system models (ESMs). However, we still have very limited knowledge on the performance skills of these land models. This chapter introduces benchmark analysis, which is a procedure to measure performance of models against a set of defined standards. The benchmark analysis includes: (1) defining targeted aspects of model performance to be evaluated; (2) testing model performance in comparison with a set of benchmarks; (3) measuring model performance skill through quantitative metrics; and (4) evaluating model performance and offering suggestions for future model improvement.

Luo, Yiqi↗
DOE OSTI2022

The Impact of Increased Requirements for Verification Measurements of Category III and IV Receipts

As part of the regular nuclear material accounting and control process, sites that have accountable nuclear material regularly perform measurements of the material in their possession. The expectation for the type of measurements and their frequency is set out in Department of Energy (DOE) Order 474.2, and further detailed in each site’s respective material control and accountability (MC&A) plan and associated controlling documents. The measurements of interest in this report are those performed on external (between DOE sites) transfer receipts of Category III or IV accountable materials. In 2020, a revision of DOE Order 474.2 was proposed that would significantly increase the requirement that measurements be performed upon receipt of material, and further, that those measurements be quantitative verification (rather than qualitative confirmatory) measurements. A survey was performed of DOE sites to discuss the impact on their MC&A measurements program if more rigorous verification measurements requirements for Category III and IV receipts were implemented. An assessment of nondestructive assay (NDA) measurement instruments to meet those needs was also performed. Across the board, sites indicated that personnel and budget would cause the largest impact. Sites which are qualified as Category I/II indicated a reduced impact as these sites already have the measurement capabilities and some personnel but would require the acquisition of additional measurement systems. Category III/IV sites indicated a much larger impact as these sites generally have smaller MC&A programs. A few smaller sites stated a measurement program would need to be created to handle the demand. Calorimetry, quantitative gamma spectroscopy and neutron coincidence counting systems were identified as common systems that could meet the verification measurement requirements. The other, and perhaps larger issue is the need for calibration standards for the calorimetry and neutron coincidence counting systems. It is proposed that a comparative study be performed for ISOCS and ISOTOPICS, qualification of a COTS calorimetry system be performed, and development of an AWCC system that uses a neutron generator.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2023

Holographic measurement in CFT thermofield doubles

We extend the results of arXiv:2209.12903 by studying local projective measurements performed on subregions of two copies of a CFT 2 in the thermofield double state and investigating their consequences on the bulk double-sided black hole holographic dual. We focus on CFTs defined on an infinite line and consider measurements of both finite and semi-infinite subregions. In the former case, the connectivity of the bulk spacetime is preserved after the measurement. In the latter case, the measurement of two semi-infinite intervals in one CFT or of one semi-infinite interval in each CFT can destroy the Einstein-Rosen bridge and disconnect the bulk dual spacetime. In particular, we find that a transition between a connected and disconnected phase occurs depending on the relative size of the measured and unmeasured subregions and on the specific Cardy state the measured subregions are projected on. We identify this phase transition as an entangled/disentangled phase transition of the dual CFT system by computing the post-measurement holographic entanglement entropy between the two CFTs. We also find that bulk information encoded in one CFT in the absence of measurement can sometimes be reconstructed from the other CFT when a measurement is performed, or can be erased by the measurement. Finally, we show that a purely CFT calculation of the Renyi entropy using the replica trick yields results compatible with those obtained in our bulk analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Nuclear fuel irradiation testbed for nuclear security applications

The nuclear security community has long been interested in the identification and quantification of nuclear material signatures to understand a material’s provenance, use, and ultimate application. New forensics signatures and methods intended for non-traditional or advanced nuclear fuel applications require fuel irradiation experiments to demonstrate viability and validity. Integral fuel irradiations have historically required significant costs and long timelines to design, irradiate, and characterize. This paper describes how a recently developed nuclear fuel irradiation testbed can be used to provide a low cost, rapid turnaround, modular test environment for irradiation and evaluation of nuclear fuel specimens for nuclear security applications. The irradiation testbed houses six small ‘MiniFuel’ samples within hermetically sealed capsules inside targets that can be removed in between each ∼25-day operating cycle of the High Flux Isotope Reactor (HFIR). As many as nine targets can be irradiated using a single irradiation position (reflector region) in HFIR, allowing for varying irradiation temperatures and burnups. A suite of hot cell capabilities have been established to perform post-irradiation examination for measuring performance (e.g., fuel swelling, fission gas release) and facilitating experiment disassembly for subsequent property measurements, microstructural analysis, or chemical assay. This new testbed allows fuel irradiations to be conducted on an accelerated timeframe to enable rapid proof of concept testing and to provide reference material for nuclear fuel security applications. Recent applications using this testbed include the testing of isotopic taggants in UO 2 fuel (intentional forensics), testing of U-10Mo fuel for down-conversion of highly enriched uranium–fueled reactors, and the production of irradiated UO 2 fuel material for signature analysis of its isotopic composition (plutonium, fission gases, etc.).

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2022

The Financial Performance of Family versus Non-Family Firms Operating in Nautical Tourism

This article analyses the financial performance of family versus non-family firms operating in nautical tourism, in 2015–2019. The sample of 39 Portuguese companies was collected from the SABI database. We use a regression of financial performance, measured by three alternative proxies: return on assets, return on equity and operating profit margin, on liquidity, leverage, turnover of assets, asset structure, company size and age. The regressions are performed across Nuts II regions on mainland and across types of firms (family and non-family). The results uncover several patterns. First, family firms are larger and older, make higher investments and therefore are less liquid. Second, liquidity, leverage and investment in tangible assets impact negatively and significantly the corporate financial performance, while the turnover of assets, size and age impacts positively and significantly. Third, the sign of the impacts depends on the measure of performance. Finally, firms in the Northern region show superior performance, which can be explained by the higher share of family firms. These findings can serve as a roadmap for managers when selecting strategies to improve performance. Additionally, they will contribute to the understanding of tourism destination dynamics and competitiveness.

Santos, Eleonora (ORCID:0000000346930804)↗
DOE OSTI2020

Are You Resilient? Site Energy and Water Resilience Indicators

There is growing interest among operators of individual or co-located facilities to plan for utility disruptions caused by natural hazards and threats. Energy and water resilience at the site level can be characterized as the ability to withstand, adapt, and recover from an energy and/or water supply disruption. But how can a site’s energy and water resilience posture be measured? An evaluation framework with clear performance measures or indicators can help organizations establish what it means to be energy and water resilient and assess progress towards meeting resilience goals across sites and over time. Tracking a consistent set of indicators can help organizations identify problem areas that should be addressed and ascertain if energy and water resilience has improved as a result of investments or operational or policy changes. Resilience indicators also provide a means for organizations with geographically distributed sites to identify common problem areas that may require higher-level attention. This paper outlines an approach that organizations can use to measure site energy and water resilience. This approach was developed by Pacific Northwest National Laboratory for the U.S. Department of Energy’s Federal Energy Management Program as part of an effort to help federal agencies plan for energy and water resilience in a more systematic and rigorous way. The paper defines a general structure for defining energy and water resilience indicators, and provides example indicators and potential rating methods.

resilience, metrics for resilience, site resilienc↗
DOE OSTI2023

CERBERUS: A ZEUS Configuration With HEU and Copper Reflected by Copper

The Critical Experiment Reflected By copper to bEtteR Understand Scattering (CERBERUS) experiment is a a series of measurements performed at the National Criticality Experiments Research Center (NCERC) on the Comet critical assembly machine with a thick copper (Cu) reflector around alternating layers of Cu plates and highly enriched uranium (HEU) pancake plates. The measurements were performed by personnel from Los Alamos National Laboratory (LANL): T. Cutler, K. Amundson, N. Thompson, T. Grove, K. Stolte, and Z. Lemke, along with the multiple people who supported additional measurements and material handling. The purpose of this experiment was to investigate the impact of Cu scattering cross-sections in an integral experiment using the Comet critical assembly machine. Three configurations, which differed in the amount of Cu between each HEU layer, were evaluated as benchmarks. The three configurations are 3/16 inch, 5/16 inch, and 7/16 inch, which represent the amount of Cu above and below each HEU layer. Throughout the rest of the document the units associated with the configuration will be removed from the configuration name.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

NCERC-CL TREAT Free Field Characterization Foil Reaction Rate Results

This report summarizes the analysis and preliminary MCNP reaction rate modeling of free field characterization measurements performed in the Transient Reaction Test Facility (TREAT) at Idaho National Laboratory (INL) between 12/18/2023 and 2/22/2024. A series of seven irradiations were performed using the Big-BUSTER (Broad Use Specimen Transient Experiment Rig) core configuration. Foil sets including 19.5% LEU-Zr alloy wire, S, Au, Fe, Ni, Co, Ti, and Zr were deployed in each irradiation. Identical foil sets were supplied to Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and INL. All foils were supplied by INL. Additional details on the experiment can be found in [2]. The foil sets were shipped to the National Criticality Experiments Research Center Counting Laboratory (NCERC-CL) branch at LANL (NCERC-CL NISC) and were received on 3/25/2024. Additional details on receipt and counting are reported in [3]. All reactor dosimetry measurements were performed in adherence to the ASTM standards applicable to reactor dosimetry. Measured reaction rates from Au, Co, Fe, Ni, and Ti are reported. Select reaction rate ratios and simulated reaction rates and ratios are discussed. Reaction rates for all measured reaction products were modeled with MCNP 6.3.1 and a TREAT input deck supplied by Edward Lum. Neutron emission estimates calculated using the measured and simulated reaction rates show excellent agreement between the three fast-threshold n-p reactions with the percent differences being < 9% between the three reactions. The capture reactions had poorer, but still reasonable, agreement with < 20% percent differences between the neutron emission estimates of the three capture reactions. The percent difference between the fast-threshold and capture reactions is ∼ 100% for each reaction. This supports the TREAT model is not accurately modeling the neutron spectrum and additional measurements are required to characterize TREAT and match measurements to simulation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Zeus: Fast-Spectrum Critical Assemblies with a Pb-HEU Core Surrounded by a Copper Reflector

The Zeus experiments with lead (Pb) were a series of measurements performed at the National Criticality Experiments Research Center (NCERC) in collaboration with the Japan Atomic Energy Agency (JAEA). Personnel from the JAEA who assisted with the experiment were Masahiro Fukushima and Akito Oizumi. The measurements were performed by Joetta Goda, Geordie McKenzie, John Bounds, Jessie Walker, Travis Grove, Theresa Cutler, Rene Sanchez, and Jesson Hutchinson from Los Alamos National Laboratory (LANL). The purpose of these experiments was to validate Pb nuclear cross sections and Pb void reactivity worth using the Comet critical assembly machine. Plates of highly enriched uranium (HEU) and Pb were arranged in a cylindrical configuration with full copper (Cu) reflection. To study the Pb void reactivity worth, a varying number of cylindrical aluminum (Al) spacers with voids replaced Pb plates in different configurations. Four configurations, which used zero to eight Al spacers, were evaluated as benchmarks.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Electron Spin Polarization in Large Electric Fields

This project investigated the effects of large electric fields on electron spin polarization in semiconductors, which is of interest for spin-based electronics (“spintronics”) and quantum information processing. It has been theoretically proposed that large electric fields could potentially preserve or amplify electron spin polarization, which would make it easier to generate, transport, and detect spin polarization in spin-based devices; however, previous measurements had not measured the response of electron spin polarization at large electric fields. During this project, methods to perform measurements of electron spin polarization at large electric fields were developed and performed using ultrafast time- and spatially-resolved magneto-optical spectroscopy, high-voltage pulses, and lock-in detection. The device geometry was engineered to reduce the threshold voltage required to reach the Gunn threshold, and the effect of optical illumination on the sample conductivity and Gunn oscillations was investigated. Electron spin polarization measurements were performed at electric fields up to and beyond the Gunn threshold for the device. The measurements showed that the electron spin polarization magnitude decreased with increasing electric field in the devices measured, and a spin amplification effect was not observed. However, these effects could potentially exist in a different material or in a material with a different doping concentration or in a different device geometry.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fast External Quantum Efficiency Measurements of Photovoltaic Modules

The external quantum efficiency (EQE) or associated spectral response is widely used to evaluate the performance of photovoltaics, light emitting diodes, photodetectors, photodiodes, semiconductor lasers, laser-induced refrigeration of solids etc. For photovoltaic (PV) devices, The EQE is used to determine the spectral mismatch correction that is used to convert a performance measurement from a non-ideal simulator spectrum to a standard spectrum in PV device calibrations. Moreover, EQE can provide important insight into the physics of a PV device. For instance, the EQE shape can be used to infer mechanisms limiting the performance of the device. However, EQE measurements of full-size PV modules remain a challenge in the PV community due to rare availability of reliable module QE measurement tools worldwide and the size and complexity of module architecture that comprises several cells connected in strings (series or/and parallel). Here, we use a customized nondestructive tool made of high-power light emitting diodes to perform high-throughput EQE measurements on PV modules. Circuit simulations show that the measurement system can safely be used to measure both crystalline silicon and thin film-based PV modules with series connected cells without the risk of damage through reverse bias. In addition, EQE mapping combined with electroluminescence show a strong correlation and provide a way to determine both spatial non-uniformity of the spectral response and defects/degradation effects across the module.

PV module↗
DOE OSTI2022

Active and passive defects in tetragonal tungsten bronze relaxor ferroelectrics

Tetragonal tungsten bronze (TTB) based oxides constitute a large family of dielectric materials which are known to exhibit complex distortions producing incommensurately modulated superstructures as well as significant local deviations from their average symmetry. The local deviations produce diffuse scattering in diffraction experiments. The structure as well as the charge dynamics of these materials are anticipated to be sensitive to defects, such as cation or oxygen vacancies. In this work, in an effort to understand how the structural and charge dynamical properties respond to these two types of vacancy defects, we have performed measurements of dielectric susceptibilities and single crystal diffraction experiments of two types of TTB materials with both ‘filled’ (Ba 2 NdFeNb 4 O 15 and Ba 2 PrFeNb 4 O 15 ) and ‘unfilled’ (Sr 0.5 Ba 0.5 Nb 2 O 6 ) cation sublattices. We also perform these measurements before and after oxygen annealing, which alters the oxygen vacancy concentrations. Surprisingly, we find that many of the diffuse scattering features that are present in the unfilled structure are also present in the filled structure, suggesting that the random fields and disorder that are characteristic of the unfilled structure are not responsible for many of the local structural features that are reflected in the diffuse scattering. Furthermore, oxygen annealing clearly affected both color and dielectric properties, consistent with a diminishment of the oxygen vacancy concentration, but had little effect on observed diffuse patterns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Characterizing Complex Gas–Solid Interfaces with in Situ Spectroscopy: Oxygen Adsorption Behavior on Fe–N–C Catalysts

Electrocatalysts for the oxygen reduction reaction within polymer electrolyte membrane fuel cells based on iron, nitrogen, and carbon elements (Fe–N–C) are receiving significant research attention as they offer an inexpensive alternative to catalysts based on platinum-group metals. Although both the performance and the fundamental understanding of Fe–N–C catalysts have improved over the past decade, there remains a need to differentiate the relative activity of different active sites. Toward this goal, our study is focused on characterizing the interactions between O 2 and a set of five structurally different Fe–N–C materials. Detailed characterization of the Fe speciation was performed with 57 Fe Mössbauer spectroscopy and soft X-ray absorption spectroscopy of the Fe L 3,2 -edge, whereas nitrogen chemical states were investigated with X-ray photoelectron spectroscopy (XPS). In addition to initial sXAS and XPS measurements performed in ultra-high vacuum (UHV), measurements were also performed (at the identical location) in an atmosphere of 100 mTorr of O 2 at 80 °C (O 2 -rich). XPS and sXAS results reveal the presence of several types of FeNxCy adsorption sites. FeNxCy sites that are proposed as the most active ones do not show significant change (based on the techniques used in this study) when their environment is changed from UHV to O 2 -rich. Correlation with Mössbauer and sXAS results suggests that this is most likely due to the persistence of strongly adsorbed O 2 molecules from their previous exposure to air. However, other species do show spectroscopic changes from UHV conditions to O 2 -rich. This implies that these sites have a weaker interaction with O 2 that results in their desorption in vacuum conditions and re-adsorption when exposed to the O 2 -rich environment. The nature of these weakly and strongly O 2 -adsorbing FeN x C y sites is discussed in the context of different synthetic and processing parameters employed to fabricate each of these five Fe–N–C materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Calibration, modeling, parameterization, and verification of the instrument transfer function of an interferometric microscope

Interferometric microscopes are used to measure surface roughness, from which the computed power spectral density function can be used to extract bandwidth-limited values of the various surface properties, such as root-mean-square (rms) height and slope errors. Measurements with a microscope equipped with different objectives that have an overlapping spatial frequency range usually give different rms results over the common frequency bandwidth. This is a result of different instrument transfer functions (ITFs) that attenuate spatial frequencies by different amounts over the overlapping range. We report on the use of binary pseudo-random array (BPRA) standards to characterize the ITF of an interferometric microscope with the various objectives. We use a simple model of a 1D binary Results show that the spectrum for an undersampled array is a cosine function, rather than a straight line, constant white noise spectrum. We have an analytical model of the ITF that includes the effects of an obscured aperture and defocus, in addition to the usual parameters of numerical aperture, wavelength, and sampling period. In addition, the model includes the effect of aliasing of spatial frequency components beyond the Nyquist back into the sub-Nyquist region. We compare the model PSD predictions to the measurements performed with different objectives. Departures of the measured PSDs from the model predictions indicate that there are higher-order ITF corrections yet to be identified and included in the model.

Takacs, PZ↗
DOE OSTI2022

Focusing ions at atmospheric pressure using nonlinear DC voltage sequences applied to a stacked ring ion guide

Many modern ion mobility (IM) and mass spectrometers (MS) operate under low pressure (= 10 Torr) and employ high voltage radiofrequencies (RF) to provide ion confinement. Unfortunately, RF effectiveness drastically decreases as pressure increases, and few techniques for focusing ions at elevated pressures exist. Here we demonstrate a new approach for focusing ions at atmospheric pressure (AP) by applying nonlinear DC voltage sequences following quadratic and power (exponential) functions to a stacked ring ion guide. In this work, we used ion trajectory simulations to rigorously explore how ions react to nonlinear electric fields and validate the simulations with a set of ion current measurements performed at AP. Ion trajectory simulations show that ions initially defocus near the entrance of the device but then become intensely focused as they travel through the device. Contour plots for both nonlinear voltage sequences show electric field lines that increasingly curve inwards as a function of distance, resulting in spatial ion focusing. Experimental ion current and spot size measurements were performed at AP using a 10-cm stacked ring ion guide and a segmented Faraday cup detector. Quadratic sequences produced ~5% smaller spot sizes (~22.8 mm) and ~25% higher ion current compared to a linear voltage sequence (~24.0 mm). Alternatively, power sequences produced ~64% smaller spot sizes (~8.7 mm), albeit with ~10x lower ion current. However, both nonlinear voltage sequences produced similar ion currents at the center of the Faraday cup detector, indicating that higher ion densities are achieved when using nonlinear voltage gradients. These results demonstrate a new way to focus ions at AP, and the capabilities demonstrated here provide fundamental insights on how to keep ions inside analytical devices at elevated pressures without RF.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Focusing Ions at Atmospheric Pressure using Nonlinear DC Voltage Sequences Applied to a Stacked Ring Ion Guide

Many modern ion mobility (IM) and mass spectrometers (MS) operate under low pressure (= 10 Torr) and employ high voltage radiofrequencies (RF) to provide ion confinement. Unfortunately, RF effectiveness drastically decreases as pressure increases, and few techniques for focusing ions at elevated pressures exist. Here we demonstrate a new approach for focusing ions at atmospheric pressure (AP) by applying nonlinear DC voltage sequences following quadratic and power (exponential) functions to a stacked ring ion guide. We used ion trajectory simulations to rigorously explore how ions react to nonlinear electric fields and validate the simulations with a set of ion current measurements performed at AP. Ion trajectory simulations show that ions initially defocus near the entrance of the device but then become intensely focused as they travel through the device. Contour plots for both nonlinear voltage sequences show electric field lines that increasingly curve inwards as a function of distance, resulting in spatial ion focusing. Experimental ion current and spot size measurements were performed at AP using a 10-cm stacked ring ion guide and a segmented Faraday cup detector. Quadratic sequences produced ~5% smaller spot sizes (~22.8 mm) and ~25% higher ion current compared to a linear voltage sequence (~24.0 mm). Alternatively, power sequences produced ~64% smaller spot sizes (~8.7 mm), albeit with ~10x lower ion current. However, both nonlinear voltage sequences produced similar ion currents at the center of the Faraday cup detector, indicating that higher ion densities are achieved when using nonlinear voltage gradients. These results demonstrate a new way to focus ions at AP, and the capabilities demonstrated here provide fundamental insights on how to keep ions inside analytical devices at elevated pressures without RF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

TEDS Test Plan for Performance Characterization of Packed-bed Thermal Energy Storage Unit

This report proposes a set of test plans for performance measurement and characterization of the packed-bed thermal energy storage (TES) unit for TEDS. The main goals of this test plan are three-fold: (i) support the high-fidelity data measurement for TEDS, (ii) characterize thermal and structural performance of the TEDS TES unit, and (iii) produce high quality validation-oriented data. To achieve the goals, it is first suggested to revisit the instrument calibration and data sampling protocols applied during the startup and commissioning tests of TEDS, based on the observation from the recent CFD validation study using the TEDS TES operational data. The uncertainty quantification of the thermal and hydraulic measurements is also suggested. Lastly, test matrices are provided for charge, discharge, and standby modes of the packed-bed TES unit, respectively, to characterize the thermal and structural performances during the envisioned TEDS operations.

25 ENERGY STORAGE↗
DOE OSTI2023

Anomalous electronic transport in high-mobility Corbino rings

We report low-temperature electronic transport measurements performed in two multi-terminal Corbino samples formed in GaAs/Al-GaAs two-dimensional electron gases (2DEG) with both ultra-high electron mobility ( ≳ 20 × 10 6 cm 2 / Vs) and with distinct electron density of 1.7 and 3.6 × 10 11 cm -2 . In both Corbino samples, a non-monotonic behavior is observed in the temperature dependence of the resistance below 1 K. Surprisingly, a sharp decrease in resistance is observed with increasing temperature in the sample with lower electron density, whereas an opposite behavior is observed in the sample with higher density. To investigate further, transport measurements were performed in large van der Pauw samples having identical heterostructures, and as expected they exhibit resistivity that is monotonic with temperature. Finally, we discuss the results in terms of various lengthscales leading to ballistic and hydrodynamic electronic transport, as well as a possible Gurzhi effect.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗