SEARCH · Search NASA

Results for “principle components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS2012

Magnetic Materials Suitable for Fission Power Conversion in Space Missions

Terrestrial fission reactors use combinations of shielding and distance to protect power conversion components from elevated temperature and radiation. Space mission systems are necessarily compact and must minimize shielding and distance to enhance system level efficiencies. Technology development efforts to support fission power generation scenarios for future space missions include studying the radiation tolerance of component materials. The fundamental principles of material magnetism are reviewed and used to interpret existing material radiation effects data for expected fission power conversion components for target space missions. Suitable materials for the Fission Power System (FPS) Project are available and guidelines are presented for bounding the elevated temperature/radiation tolerance envelope for candidate magnetic materials.

Bowman, Cheryl L.↗

NASA NTRS1993

Enhancements to the Engine Data Interpretation System (EDIS)

The Engine Data Interpretation System (EDIS) expert system project assists the data review personnel at NASA/MSFC in performing post-test data analysis and engine diagnosis of the Space Shuttle Main Engine (SSME). EDIS uses knowledge of the engine, its components, and simple thermodynamic principles instead of, and in addition to, heuristic rules gathered from the engine experts. EDIS reasons in cooperation with human experts, following roughly the pattern of logic exhibited by human experts. EDIS concentrates on steady-state static faults, such as small leaks, and component degradations, such as pump efficiencies. The objective of this contract was to complete the set of engine component models, integrate heuristic rules into EDIS, integrate the Power Balance Model into EDIS, and investigate modification of the qualitative reasoning mechanisms to allow 'fuzzy' value classification. The results of this contract is an operational version of EDIS. EDIS will become a module of the Post-Test Diagnostic System (PTDS) and will, in this context, provide system-level diagnostic capabilities which integrate component-specific findings provided by other modules.

Hofmann, Martin O.↗

NASA NTRS1993

Enhancements to the Engine Data Interpretation System (EDIS)

The Engine Data Interpretation System (EDIS) expert system project assists the data review personnel at NASA/MSFC in performing post-test data analysis and engine diagnosis of the Space Shuttle Main Engine (SSME). EDIS uses knowledge of the engine, its components, and simple thermodynamic principles instead of, and in addition to, heuristic rules gathered from the engine experts. EDIS reasons in cooperation with human experts, following roughly the pattern of logic exhibited by human experts. EDIS concentrates on steady-state static faults, such as small leaks, and component degradations, such as pump efficiencies. The objective of this contract was to complete the set of engine component models, integrate heuristic rules into EDIS, integrate the Power Balance Model into EDIS, and investigate modification of the qualitative reasoning mechanisms to allow 'fuzzy' value classification. The result of this contract is an operational version of EDIS. EDIS will become a module of the Post-Test Diagnostic System (PTDS) and will, in this context, provide system-level diagnostic capabilities which integrate component-specific findings provided by other modules.

Hofmann, Martin O.↗

NASA NTRS1963

Components for the telstar project

The Telstar project required a variety of components and structures of high reliability. The program for obtaining these components was essentially that originated for submarine cable devices, in which designs of proven integrity were manufactured under controlled conditions, screened and aged to remove defectives, and then life tested and certified using techniques for selecting the most stable components. This program summary illustrates in principle the techniques described in detail in the body of this components section of the issue.

SUBMARINE CABLE↗

NASA NTRSDate not supplied

AI/ML Components in Safety-Critical Aviation Systems: Selected Concepts and Underlying Principles

The objective of the AI Roadmap meeting is to engage with all stakeholders in aviation in an open conversation about our approach and the guiding principles that can help us in moving forward in the technological landscape of AI/ML. The objective of the Technical Exchange Meeting is to identify categories of safety concerns associated with having an AI component in the aircraft we identified in the previous Technical Exchange Meetings. The speakers will bring their experience to the discussion to stimulate active participation with all stakeholders.

Design Safety↗

NASA NTRS1972

DC motor proportional control system for orthotic devices

Multi-channel proportional control system for operation of dc motors for use with externally-powered orthotic arm braces is described. Components of circuitry and principles of operation are described. Schematic diagram of control circuit is provided.

Blaise, H. T.↗

NASA NTRS1989

Traction-drive force transmission for telerobotic joints

A mechanism which meets the requirements of a teleoperated manipulator and those of an autonomous robot is discussed. The mechanism is a traction-drive differential that uses variable preload mechanisms. The differential provides compact design, with dextrous motion range and torque density similar to geared systems. The traction drive offers high stiffness to backlash for good robotic performance. The variable-loading mechanism (VLM) minimizes the drive-train friction for improved teleoperation. This combination provides a mechanism to allow advanced manipulation with either teleoperated control or autonomous robotic operation. The design principles of both major components of the joint mechanism are described.

Williams, D. M.↗

NASA NTRS1991

Scanning X-Ray Or Extreme-Ultraviolet Monochromator

Wavelength of peak transmission of proposed high-throughput, narrow-band-pass x-ray or extreme-ultraviolet monochromator continuously adjustable. Essential filtering and reflecting components designed according to principles described in "Compact X-Ray and Extreme-Ultraviolet Monochromator" (MFS-28499). However, angle of incidence varied to change wavelength of Bragg reflection.

Hoover, Richard↗

NASA NTRS1992

The application of Open System Architecture to planetary surface systems

The issues that future planet surface activities must confront are explored, the basic concepts that provide the basis for establishing an Open System Architecture (OSA) are defined, the appropriate features of such an architecture are identified, and examples of OSAs are discussed. OSAs are designed to provide flexibility and evolutionary growth of planet surface systems to support the users needs. An OSA is based on two fundamental principles: precise definition of component functionality and the establishment of standards. An OAS must be functionally decomposed, top down, to identify all functions, subfunctions, subsubfunctions, etc., that are required to be performed by the system. There is an allocation of function, or process, to components. The functional packaging within a component becomes the user's primary perception of the system. The standards of an OSA enable the user to attain the full functional capabilities inherent in the system.

Petri, D. A.↗

NASA NTRS1993

RAPID: The imaging energetic particle spectrometer on Cluster

The RAPID spectrometer for the Cluster mission, an advanced particle detector for the analysis of suprathermal plasma distributions in the energy range from 20 to 400 keV and from 2 keV/nuc to 1500 keV for electrons and ions, respectively, is presented. Novel detector concepts in combination with pinhole acceptance permit the measurement of angular distributions over a range of 180 deg in polar angle for either species. The detection principle for the ionic component is based on a two dimensional analysis of a particle's velocity and energy. Electrons are identified by the well known energy range relationship. The detection techniques are described and selected areas in geospace are used to highlight the scientific objectives of this investigation.

Wilken, B.↗

NASA NTRS1994

Design reuse experience of space and hazardous operations robots

A comparison of design drivers for space and hazardous nuclear waste operating robots details similarities and differences in operations, performance and environmental parameters for these critical environments. The similarities are exploited to provide low risk system components based on reuse principles and design knowledge. Risk reduction techniques are used for bridging areas of significant differences. As an example, risk reduction of a new sensor design for nuclear environment operations is employed to provide upgradeable replacement units in a reusable architecture for significantly higher levels of radiation.

Oneil, P. Graham↗

NASA NTRS1987

Simulation of dc spacecraft power systems using state variable techniques

The modeling and simulation of large dc spacecraft power systems necessitates considering the spacecraft power system as an interconnection of modular components. This paper presents a state-variable-based approach for dc spacecraft power system modeling and simulation. Each modular component is treated as a two-port network, and a state model is written with the port voltages as the inputs. The state model of a component is solved independently of the other components using its state transition matrix. The state variables of each component are updated assuming that the inputs are constant. Network analysis principles are then utilized to calculate the component inputs.

Nelms, R. M.↗

NASA NTRS1987

Noncoplanar magnetic fields, shock potentials, and ion deflection

A puzzling aspect of the structure of collisionless shock waves concerns the existence of a component of magnetic field that lies out of the coplanarity plane in the transition layer. It is shown that the existence of this component may be understood and its value calculated from a simple expression derived from first principles. The value of this field component may be derived without reference to the transformation properties of the fields or the changes in energy that the ions and electrons undergo on traversing the electrostatic potential of the shock interface.

Jones, Frank C.↗

NASA NTRS1987

Isomorphisms between Petri nets and dataflow graphs

Dataflow graphs are a generalized model of computation. Uninterpreted dataflow graphs with nondeterminism resolved via probabilities are shown to be isomorphic to a class of Petri nets known as free choice nets. Petri net analysis methods are readily available in the literature and this result makes those methods accessible to dataflow research. Nevertheless, combinatorial explosion can render Petri net analysis inoperative. Using a previously known technique for decomposing free choice nets into smaller components, it is demonstrated that, in principle, it is possible to determine aspects of the overall behavior from the particular behavior of components.

Kavi, Krishna M.↗

NASA NTRS2006

Flying the ST-5 Constellation with "Plug and Play" Autonomy Components and the GMSEC Bus

The Space Technology 5 (ST5) Project, part of NASA's New Millennium Program, will consist of a constellation of three micro-satellites. This viewgraph document presents the components that will allow it to operate in an autonomous mode. The ST-5 constellation will use the GSFC Mission Services Evolution Center (GMSEC) architecture to enable cost effective model based operations. The ST-5 mission will demonstrate several principles of self managing software components.

Shendock, Bob↗

NASA NTRS1991

Component mode damping assignment techniques

A relation between the system modal damping matrix and the component modal damping matrix is derived from First Principles. An optimization problem is then formulated to select all the component modes' damping ratios that best satisfy the above derived relation. A weighting matrix is used in the cost functional to stress the relative importance of the diagonal terms in the damping matrix. Inequality constraints are also added to the optimization problem to pick only nonnegative component modes' damping factors. The optimization problem may be solved algebraically or iteratively. The proposed techniques are successfully used on a high order, finite element model of the Galileo spacecraft.

Lee, Allan Y.↗

NASA NTRS1973

Development of trace gas detection instrumentation

Breadboard hardware was constructed to demonstrate detection of a gaseous species by the heterodyne principle. The characteristics of the component parts were investigated and preliminary measurements were made to establish the sensitivity and selectivity of the method for gas analysis of CO, CO2, and N2O. A prototype heterodyne gas analyzer was designed, built, and brought into operational condition. Performance parameters of the prototype analyzer were investigated and its sensitivity to CO2 measured. Further development was undertaken for both the optical bench and the electronic processor components. A three-gas prototype analyzer, capable of measuring the gases CO, CO2, and CH4 was also constructed and tested. Detailed descriptions of the work and results are presented.

Source record↗

NASA NTRS1973

An improved numerical process for solution of solid mechanics problems

This paper gives an overview of the development and status of an improved numerical process for the solution of solid mechanics problems. The proposed process uses a mixed formulation with the fundamental unknowns consisting of both stress and displacement parameters. The problem is formulated either by means of first-order partial differential equations or in a variational form by using a Hellinger-Reissner-type mixed variational principle. For presentation purposes, the components of a numerical process are characterized and the criteria for an ideal process are outlined. Commonly used finite-difference and finite-element procedures are examined in the light of these criteria and it is shown that they fall short in a number of ways. The proposed numerical process, on the other hand, satisfies most of the optimality criteria and appears to be particularly suited for use with the forthcoming generation computers.

Noor, A. K.↗