Search NASA⌕ Search

SEARCH · Search NASA

Results for “printing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Hypervelocity Impact Performance of 3D Printed Aluminum Panels

With the continued development of additive manufacturing methods, control over the shape of ligaments, cell regularity, and macroscopic shape can all be easily tuned. This capability allows for tailoring of component architecture and promotes potential mass savings in a space vehicle structure. Additionally, it allows one the flexibility of combining structural elements such as MMOD protection and vehicle stiffness for launch loads for an overall mass reduction. At NASA JSC this technology is being explored in many different ways with the goal being a multifunctional structural component. For this study, four different types of aluminum panels have been 3D printed for testing, three being of a body centric cubic (BCC) lattice structure core and one being kelvin cell structure core. All samples have a 5.33 cm (0.05”) nominally thick aluminum face sheet printed on the front and back side of each panel, with all core materials having a 5.08 cm (2.0”) nominal thickness (see Table 1 for test sample summary and Figures 1 – 2 for sample illustrations). These tests will evaluate the performance of 3D printed aluminum panels under hypervelocity impact (HVI) conditions. The hypervelocity impact tests are being conducted at the JSC White Sands Test Facility (WSTF) Remote Hypervelocity Test Laboratory (RHTL), located in Las Cruces, New Mexico. All tests will be conducted with a 3.4mm Al 2017-T4 sphere at 6.8 km/s impacting at 0° to surface normal (i.e., impacting with no obliquity). Each sample will be trapped between two metal frames, with gasket material residing between the sample and frame, which will be the shipping and testing configuration for all tests. There will be an Al 2017-T4 witness plate staged 5.08 cm (2.0”) from each sample to capture signature of debris, if the rear face sheet of the sample were to perforate from the HVI test event.

Davis, B. A.↗
NASA NTRS2019

Electrical and Thermal Characterization of 3D Printed Thermoplastic Parts with Embedded Wires for High Current-Carrying Applications

Fabrication of parts exhibiting multi-functionality has recently been complemented by hybrid polymer extrusion additive manufacturing in combination with wire embedding technology. While much mechanical characterization has been performed on parts produced with fused deposition modeling, limited characterization has been performed when combined electrical and thermal loads are applied to 3D printed multi-material parts. As such, this work describes the design, fabrication, and testing of 3D printed thermoplastic coupons containing embedded copper wires that carried current. An automated fabrication process was used employing a hybrid additive manufacturing machine that dispensed polycarbonate thermoplastic and embedded bare copper wires. Testing included AC and DC hipot testing as well as thermal testing on as-fabricated and heat treated coupons to determine the effect of porosity in the substrate. The heat-treated parts contained reduced amounts of porosity, as corroborated through scanning electron microscopy, which led to 50 % increased breakdown strength and 30 to 40 % increased heat dissipation capabilities. The results of this research are describing a set of design protocol that can be used as a guideline for 3D printed embedded electronics to predict the electrical and thermal behavior.

Hipot testing↗
NASA NTRS2021

3-D Bioprinter Overcomes Gravity by Printing Living Tissues in Space

Techshot, Inc., based in Greensville, IN, is the first U.S. company to 3-D print organic products on the International Space Station (ISS). The company’s BioFabrication Facility (BFF), developed in collaboration with nScrypt, Inc., prints in space to overcome the effects of gravity on Earth, which cause 3-D printed tissues to disform under their own weight. Techshot’s BFF was launched to the ISS supported by the NASA SBIR/STTR program in 2019. The company has since worked with NASA and other customers, valuing BFF’s external investments at more than $5 million, including $2.5 million from the ISS Program.

SBIR↗
NASA NTRSDate not supplied

Quick and Correlative TOF-SIMS Analysis of Dispersoid Content in Powder Feedstock and Printed Oxide Dispersion Strengthened Alloys

Oxide dispersion strengthening (ODS) of metal alloys, when combined with additive manufacturing (AM), can be used to solve high-temperature material application problems. The performance of ODS materials is dependent on nano-scale oxide being distributed uniformly throughout the metal matrix; a homogenous distribution is critical to the creep and yield strength. Therefore, quantifying and analyzing these oxide nanoparticles is essential for ODS alloy development. Assessing the chemistry and morphology of dispersoids in a material can be conducted using a variety of X-ray and electron-based methods. Time of Flight Secondary Ion Mass Spectrometry (TOF-SIMS), which assesses chemical concentrations from ion masses, provides the necessary spatial resolution and avoids potential spectral overlap of all elements present. In this work, preparing ODS powder feedstock and Laser Powder Bed Fusion AM was conducted with a NiCoCr alloy and yttria dispersoid, mixed with a Resodyn resonance mixer and printed on an EOS M100 3D printer at NASA Glenn. TOF-SIMS was performed on a Physical Electronics NanoTOF TRIFT V TOF-SIMS at Case Western Reserve University. The TOF-SIMS results collected on the feedstock powder samples correspond to the qualitative interpretation of the homogeneity of the oxide coating on the metal powder from SEM images. This provides quantitative support to the qualitative microscopy images collected earlier in the process design phase. The variance in the yttrium distribution on the powder feedstock samples also correlated with the variance of the yttrium distribution detected in the printed samples. This correlation supported the hypothesis that an even coating of yttria on the metal powders contributes to an even distribution of yttria in the printed material.

Laura G. Wilson↗
NASA NTRSDate not supplied

3D Printed Materials Characterization for Rapid Prototyping and Plant Growth

Space Biology experimentation but their effects during plant growth and sanitation have not been documented. With further testing we can determine how certain 3D printed materials affect our plants. The way we tested germination included laying two pieces of germination paper down with the printed petri dish insert of the various material and 14 seeds of Outrageous lettuce to fit in the holes of the insert. We kept an even moisture in all parts by wrapping the petri dishes in two layers of parafilm tape. This project tests over 15 different materials to document performance during plant growth scenarios. This research will not only help space biology but also citizens who use these materials to understand the potential of leaching and ill effects. 3D printing is a recent generally accessed technology with new materials coming out every day. It is important to understand how materials could impact the way the plants grow, and the safety of the food grown. As we continue testing these materials, we will also test engineering properties like tension and elasticity. We have a microbiology team working on this project as well to test biofilm formation. From the germination tests we have completed we have seen little impact on germination rate of these seeds. However, some parts absorb moisture. An ideal material is one that doesn’t leach chemicals or microplastics, can withstand high tension and compression, and doesn’t promote microbial growth. This work is funded by NASA. M. Gandhi was funded by MAIANSE.

Mily Gandhi↗
NASA NTRS2023

3D Printed Substrate

In preparation for long-term, manned, deep space missions, NASA requires a sustainable system for crop and food production. This system has a variety of benefits, including a fresh food supply, improvements in air quality, a lower need to resupply and psychological benefits for the gardeners. Specifically, NASA is attempting to improve and iterate their Vegetable Production System (VEGGIE), a plant growth unit currently aboard the International Space Station (ISS). The VEGGIE unit is highly dependent on a variety of factors, including passive water delivery, growth lights, rooting pillows and cabin conditions. While previous teams have improved and redesigned water reservoirs, the primary objective of the project was to create a new substrate unit to replace the current rooting pillow design. The current design consists of an electrostatic bag filled with arcillite and a slow-release fertilizer pellet. The prototype design retains the fertilizer pellet for nutrient consistency, however the outer bag and arcillite fillings have been replaced with a 3D printed lattice block. This lattice block has several key points that allow it to function in similar ways to the current design: 1. The lattice planes are porous, with each pore offset such that the overall porosity is the same as the arcillite filling. 2. The block demonstrates a wicking nature and is able to pull water upwards towards the roots. This minimizes time needed to integrate with the existing water reservoir. 3. The filament used is highly flexible and is able to pull apart to accommodate root growth. 4. The lattice planes are connected by microfibers left behind from the printing process. These fibers provide support for the growing roots and keep the lattice planes properly aligned. The substrate block design seeks to reduce the payload costs by being entirely 3D printed. While filament would still need to be provided to the ISS, it is far less expensive than shipping arcillite due to the significantly lower weight. The final design has iterated the lattice plane concept and utilizes vertically placed planes with pores running parallel to the water reservoir. This design has reliably shown water uptake and retention and has been successful in growing multiple romaine lettuce plants. Future work should include further growth testing using multiple plant species, compost and reusability testing, food safety testing and microgravity growth testing.

Affan Bhutta↗
NASA NTRS2019

Aerosol Jet Printing on Rigid and Flexible Substrates for Space Applications

Aerosol Jet Printing (AJP) will enable new detector assemblies that were not previously possible with traditional assembly processes. This technology has the potential to reduce mass and volume for fabrication and assembly of detector, instrument and electronics concepts by reducing trace widths down to 10 microns, printing on complex geometries, and allowing new concept production. This presentation summarizes efforts developing AJP for detectors and circuitry for space applications.

Aerosol Jet Printing↗
NASA NTRSDate not supplied

TeleLayering: Teleoperated Construction 3D Printing Using Multimodal Feedback for Extraterrestrial and Terrestrial Construction

In this paper, we propose a teleoperated construction 3D printing technology, called TeleLayering, for planetary and terrestrial applications. The TeleLayering technology is enabled by effective multimodal control and monitoring systems and enhanced construction 3D printing robots to build or repair a variety of structures in extreme environments without the need for human presence on the jobsite. This paper presents a general description, main technical requirements, implementation challenges, and applications of this technology.

TeleLayering↗
NASA NTRSDate not supplied

SIBatt-3D In-Space/On-Surface 3D Printing of Sodium Ion Batteries using ISRU Materials

Sustainable on-demand power solutions are an absolute necessity as humanity works to establish a permanent presence on the moon and make the journey to Mars. NASA’s SIBatt-3D Early Career Initiative project at MSFC is developing shape-conformable Sodium-Ion batteries that can be 3D printed in-space as needed during extended space missions. SIBatt-3D makes use of the unique advantages of 3D printing to create shape-conformable batteries with improved performance that reduce dead volume in devices and seeks to utilize materials found in Lunar/Martian regolith as feedstocks to provide sustainable power for surface operations on the Moon and Mars. SIBatt-3D’s batteries also have terrestrial implications such as improved battery safety and sustainability.

3D Printing↗
NASA NTRS1968

Optical system facilitates inspection of printed circuit boards

Optical comparator method determines the quality and registration of surface features of double-sided printed circuit boards. Color-coded superimposed images of both sides of a printed circuit board are presented to view, clearly showing details and registration of the circuitry.

Cridlin, M.↗
NASA NTRS1973

Improved photographic prints with a linear radial transmission filter

Linear Radial Transmission Filter (LRTF) is easy to use and yet results in prints which depict more information contained in negative than can be shown by direct printing. LRTF is optical-quality filter which has maximum transmission in center and linear drop in transmission radially out from center.

Weinstein, L. M.↗
NASA NTRS1973

Development and evaluation of polyimide laminates for printed wiring board applications

A developmental and evaluation program on polyimide laminates as printed wiring boards is described. The development of an experimental polyimide with low linear coefficient of thermal expansion normal to the plane of the board is discussed, and its properties are evaluated along with two commercial polyimide printed wiring boards for comparison with the type G-10 epoxy board. Thermal cycling data indicate an urgent need for effectively controlling the expansion normal to the plane of the board in order to minimize solder joint damage.

Patterson, W. J.↗
NASA NTRS1977

Automated fabrication of back surface field silicon solar cells with screen printed wraparound contacts

The development of a process for fabricating 2 x 4 cm back surface field silicon solar cells having screen printed wraparound contacts is described. This process was specifically designed to be amenable for incorporation into the automated nonvacuum production line. Techniques were developed to permit the use of screen printing for producing improved back surface field structures, wraparound dielectric layers, and wraparound contacts. The optimized process sequence was then used to produce 1852 finished cells. Tests indicated an average conversion efficiency of 11% at AMO and 28 C, with an average degradation of maximum power output of 1.5% after boiling water immersion or thermal shock cycling. Contact adherence was satisfactory after these tests, as well as long term storage at high temperature and high humidity.

Thornhill, J. W.↗
NASA NTRS1980

Screen printing technology applied to silicon solar cell fabrication

The process for producing space qualified solar cells in both the conventional and wraparound configuration using screen printing techniques was investigated. Process modifications were chosen that could be easily automated or mechanized. Work was accomplished to optimize the tradeoffs associated with gridline spacing, gridline definition and junction depth. An extensive search for possible front contact metallization was completed. The back surface field structures along with the screen printed back contacts were optimized to produce open circuit voltages of at least an average of 600 millivolts. After all intended modifications on the process sequence were accomplished, the cells were exhaustively tested. Electrical tests at AMO and 28 C were made before and after boiling water immersion, thermal shock, and storage under conditions of high temperature and high humidity.

Thornhill, J. W.↗
NASA NTRS1982

CADAT Printed-Wiring-Board Designer

CADAT printed-wiring-board system (PWB) designs printed-circuit and hybrid-circuit boards. It is comprised of four programs: preprocessor, placement program, organizer program, and the router. Component placement and interconnection paths are optimized.

Brinkerhoff, C. D.↗
NASA NTRS1983

Probe Array for Testing Printed-Circuit Substrates

Array of tiny probes tests complex printed circuit boards prior to mounting of microcircuit chips and other active and passive components. Insertion and alignment of board, performance of entire computer-controlled test, and printing of results requires about a minute; performed manually same tests require as much as 30 hours.

Roison, A.↗