SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This is a set of Unity components that use the Unity game engine's transform and collision systems to provide a reasonably representative approximation of any number of unique radiation sources and the collective dose they deliver to a user.
Coffee (Coffea species) and Cocoa (Theobroma cacao) are important cash crops grown in the tropics but traded globally. This study was conducted to apply the ALMANAC model to these crops for the first time, and to test its ability to simulate them under agroforestry management schemes and varying precipitation amounts. To create this simulation, coffee was grown on a site in Kaua’i, Hawai’i, USA, and cocoa was grown on a site in Sefwi Bekwai, Ghana. A stand-in for a tropical overstory tree was created for agroforestry simulations using altered parameters for carob, a common taller tropical tree for these regions. For both crops, ALMANAC was able to realistically simulate yields when compared to the collected total yield data. On Kaua’i, the mean simulated yield was 2% different from the mean measured yield, and in all three years, the simulated values were within 10% of the measured values. For cocoa, the mean simulated yield was 3% different from the mean measured yield and the simulated yield was within 10% of measured yields for all four available years. When precipitation patterns were altered, in Ghana, the wetter site showed lower percent changes in yield than the drier site in Hawai’i. When agroforestry-style management was simulated, a low Leaf Area Index (LAI) of the overstory showed positive or no effect on yields, but when LAI climbed too high, the simulation was able to show the detrimental effect this competition had on crop yields. These simulation results are supported by other literature documenting the effects of agroforestry on tropical crops. This research has applied ALMANAC to new crops and demonstrated its simulation of different management and environmental conditions. The results show promise for ALMANAC’s applicability to these scenarios as well as its potential to be further tested and utilized in new circumstances.
The U.S. Department of Energy’s Vehicle Technologies Office (DOE-VTO) supports research and development (R&D), as well as deployment of efficient and sustainable transportation technologies, that will improve energy efficiency and fuel economy and enable America to use less petroleum. To accelerate the creation and adoption of new technologies, DOE-VTO has developed specific targets for a wide range of powertrain technologies (e.g., engine, battery, electric machine, lightweighting, etc.). This paper quantifies the impact of VTO R&D on vehicle energy consumption and cost compared to expected historical improvements across vehicle classes, powertrains, component technologies and timeframes. We have implemented a large scale simulation process to develop and simulate tens of thousands of vehicles on U.S. standard driving cycles using Autonomie, a vehicle simulation tool developed by Argonne National Laboratory. Results demonstrate significant additional reductions in both cost and energy consumption due to the existence of VTO R&D targets compared to predicted historical trends. It is observed that, over time, the fuel consumption of different electrified vehicles is expected to decrease by 40–50% and a reduction of 45–55% for vehicle manufacturing costs owing to significant improvements through various VTO R&D targets.
Not provided.
Adsorption processes have the potential to significantly reduce the CO2 capture cost from power plants and industrial flue gases. InnoSepra has developed several sorbent-based technologies to obtain very high CO2 recovery and high purity CO2 while meeting the EOR/sequestration product specifications. A first-generation process was shown to achieve CO2 recoveries greater than 94% at CO2 purities in the range of 98.5-99.5%. The absolute heat energy required for the process was not only 40% lower than MEA but also was needed at a much lower temperature. This work will present the performance of the second-generation InnoSepra process which is based on a breakthrough sorbent regeneration method. This process has a projected 45% lower capital cost compared to MEA, less than 16% loss in plant output for CO2 capture and compression, and a CO2 capture cost at least 55% lower than MEA. Lab scale testing and the process simulations indicate a CO2 capture performance similar to or better than the first-generation process. Pilot scale drying and breakthrough tests were carried out at the Technology Centre Mongstad (TCM), Norway, and lab-scale cyclic tests were carried out at InnoSepra to confirm the process improvement. During these tests, InnoSepra’s flue gas purification technology was also tested at TCM. It can provide a low-cost option for the removal of NO2 and SOX to sub-ppm levels as well as a significant reduction in aerosol emissions.
Due to the occurrence of over-fitting at the learning phase, the modeling of chemical processes via artificial neural networks (ANN) by using corrupted data (i.e., noisy data) is an ongoing challenge. Therefore, this work investigates the effect of both Gaussian and non-Gaussian noise on the performance of process-structure based recurrent neural networks (RNN) models, which take the form of partially-connected RNN models in this work, that are used to approximate a class of multi-input-multi-outputs nonlinear systems. Furthermore, two different techniques, specifically Monte Carlo dropout and co-teaching, are utilized in the development of partially-connected RNN models. Here, these two techniques are employed to reduce the over-fitting in ANNs when noisy data is used in the training process and, hence, to improve the open-loop accuracy as well as the closed-loop performance under a Lyapunov-based model predictive controller (MPC). Aspen Plus Dynamics, a well-known high-fidelity process simulator, is used to simulate a large-scale chemical process application in order to demonstrate the anticipated improvements in both open-loop approximation and closed-loop controller performance in the presence of Gaussian and non-Gaussian noise in the data set using physics-informed RNNs.
In FY23, significant developments were made to the MOSCATO code package, enhancing its capabilities in many aspects. The improvements and advancements can be summarized as follows: Code Restructuring: The MOSCATO code underwent a restructuring process, enabling both Nek5000 and NekRS to share the same interface when using MOSCATO. This integration facilitates smoother interactions between the different modules and streamlines the overall simulation process. Automatic Domain Extension: To allow simulations to propagate over longer time frames, an automatic domain extension capability was added to the metal diffusion module. This enhancement enables more accurate and reliable simulations of diffusion processes, especially in scenarios with extended time requirements. Expanded Corrosion Reactions: The updated MOSCATO package now includes additional reactions that contribute to corrosion. This addition enhances the code’s ability to model corrosion effects more comprehensively, providing a more realistic representation of the systems being studied. Example Case Setup: To assist users and showcase MOSCATO’s capabilities, we developed example cases for various applications. Notably, we created example cases for thermal cells and corrosion loops. These pre-configured cases allow users to get started quickly and effectively with their simulations.
The LUX-ZEPLIN dark matter search aims to achieve a sensitivity to the WIMP-nucleon spin-independent cross-section down to (1–2) ×10−12 pb at a WIMP mass of 40 GeV/ c 2 . This paper describes the simulations framework that, along with radioactivity measurements, was used to support this projection, and also to provide mock data for validating reconstruction and analysis software. Of particular note are the event generators, which allow us to model the background radiation, and the detector response physics used in the production of raw signals, which can be converted into digitized waveforms similar to data from the operational detector. Inclusion of the detector response allows us to process simulated data using the same analysis routines as developed to process the experimental data.
We present a perspective for accelerating biomass manufacturing via digitalization. We summarize the challenges for manufacturing and identify areas where digitalization can help. A profound potential in using lignocellulosic biomass and renewable feedstocks, in general, is to produce new molecules and products with unmatched properties that have no analog in traditional refineries. Discovering such performance-advantaged molecules and the paths and processes to make them rapidly and systematically can transform manufacturing practices. Furthermore, we discuss retrosynthetic approaches, text mining, natural language processing, and modern machine learning methods to enable digitalization. Laboratory and multiscale computation automation via active learning are crucial to complement existing literature and expedite discovery and valuable data collection without a human in the loop. Such data can help process simulation and optimization select the most promising processes and molecules according to economic, environmental, and societal metrics. We propose the close integration between bench and process scale models and data to exploit the low dimensionality of the data and transform the manufacturing for renewable feedstocks.
This note provides a comprehensive overview of tools for predicting observables in the Standard Model effective field theory (SMEFT) at both tree level and one loop using event generators. We evaluate three primary methodologies–event reweighting, separate simulation of squared matrix elements, and full SMEFT process simulation–focusing on their statistical performance, computational efficiency, and potential biases. Each approach is assessed in terms of its accuracy, highlighting trade-offs between precision and resource demands. Practical insights into their applicability for high-energy physics analyses are offered, with particular attention to processes where SMEFT effects are significant. Additionally, we discuss the role of helicity in reweighting strategies and its impact on the quality of predictions. By comparing the methods across various LHC processes, this note provides guidance for selecting the most effective strategy for various SMEFT studies, ensuring robust predictions while optimizing computational resources.
Here, in this paper, we present the first pilot plant data for hydrophobic physical solvents for CO 2 and H 2 S removal from coal-derived H 2 -rich syngas. Four physical solvents were tested under pre-combustion CO 2 capture conditions at bench scale and pilot plant scale: one baseline hydrophilic solvent and three hydrophobic solvents. The solvents were: (1) polyethylene-glycol-dimethyl ether (PEGDME), a hydrophilic solvent analog for the commercial process Selexol, (2) tributyl- phosphate (TBP), a commercially available hydrophobic solvent, (3) polyethylene glycol-poly(dimethylsiloxane) (PEG-PDMS-3), and (4) diethyl sebacate (CASSH-1), a novel, computationally screened hydrophobic solvent developed by the National Energy Technology Laboratory (NETL). All solvents were studied under pure gas (CO 2 /N 2 /H 2 /CH 4 ) equilibrium conditions at NETL followed by pilot plant testing with syngas at the University of North Dakota Energy & Environmental Research Center (UND EERC). Long term performance of CASSH-1 and PEDGME was then assessed with results compared to process simulation predictions. Within experimental uncertainties, all solvents showed comparable CO 2 absorption performance at above room temperature operation while the hydrophobic solvents had limited water uptake and low vapor pressure, which alleviates concerns related to corrosion, water absorption, and solvent loss to evaporation. These results indicate low viscosity, low vapor pressure hydrophobic solvents are a promising option for lower cost CO 2 capture from high pressure syngas applications.
Abstract Robust sampling methods are foundational to inferences using phylogenies. Yet the impact of using contact tracing, a type of non-uniform sampling used in public health applications such as infectious disease outbreak investigations, has not been investigated in the molecular epidemiology field. To understand how contact tracing influences a recovered phylogeny, we developed a new simulation tool called SEEPS (Sequence Evolution and Epidemiological Process Simulator) that allows for the simulation of contact tracing and the resulting transmission tree, pathogen phylogeny, and corresponding virus genetic sequences. Importantly, SEEPS takes within-host evolution into account when generating pathogen phylogenies and sequences from transmission histories. Using SEEPS, we demonstrate that contact tracing can significantly impact the structure of the resulting tree, as described by popular tree statistics. Contact tracing generates phylogenies that are less balanced than the underlying transmission process, less representative of the larger epidemiological process, and affects the internal/external branch length ratios that characterize specific epidemiological scenarios. We also examined real data from a 2007–2008 Swedish HIV-1 outbreak and the broader 1998–2010 European HIV-1 epidemic to highlight the differences in contact tracing and expected phylogenies. Aided by SEEPS, we show that the data collection of the Swedish outbreak was strongly influenced by contact tracing even after downsampling, while the broader European Union epidemic showed little evidence of universal contact tracing, agreeing with the known epidemiological information about sampling and spread. Overall, our results highlight the importance of including possible non-uniform sampling schemes when examining phylogenetic trees. For that, SEEPS serves as a useful tool to evaluate such impacts, thereby facilitating better phylogenetic inferences of the characteristics of a disease outbreak. SEEPS is available at https://github.com/MolEvolEpid/SEEPS.
Waste Isolation Pilot Plant (WIPP) performance assessment (PA) calculations estimate the probability of radionuclide release from the repository to the land surface and across the land withdrawal boundary for a regulatory period of 10,000 years after facility closure. Simulations of flow and transport in the repository and the surrounding Salado Formation are foundational to the PA. Because proposed additional waste emplacement panels would result in an asymmetric repository layout, the US Department of Energy (DOE) is preparing to transition to use of a three-dimensional (3-D) model domain for simulation of flow and transport instead of the two-dimensional (2-D) flared grid domain currently used. DOE has charged Sandia National Laboratories with developing the capability necessary to simulate processes affecting flow and transport in the WIPP in PFLOTRAN, an open-source massively parallel multi-phase flow and reactive transport code. The new flow and transport capabilities developed in PFLOTRAN incorporate WIPP-specific process models and will replace the 2-D simulators (BRAGFLO and NUTS) that are currently utilized for Salado flow and transport calculations in WIPP PA. The focus of this paper is on the development of a new Nuclear Waste Transport (NWT) mode in PFLOTRAN that has all of the capabilities necessary for Salado transport simulations, including the ability to handle complete dry-out (100% gas saturation) of arbitrary cells in the model domain, radionuclide mass conservation at step changes in porosity associated with borehole intrusion, and the ability to calculate fluxes on a flared grid. The new PFLOTRAN transport capability and a suite of verification tests were designed around a list of functional requirements for WIPP PA calculations. (authors)
Models have historically represented fractured porous media with continuum descriptions that characterize the media using bulk parameters. The impact of small-scale features is not captured in these models, although they may be controlling the performance of subsurface applications. Pore-scale models can simulate processes in small-scale features by representing the pore space geometry explicitly but are computationally expensive for large domains. The alternative multiscale approach entails the combination of pore-scale and continuum-scale descriptions in a single framework. We use Chombo-Crunch, a computational capability that discretizes complex geometries with an adaptive, embedded boundary method to contrast these two approaches. Chombo-Crunch takes advantage of recent computational performance and memory bandwidth improvements resulting from the emergence of exascale computing resources. These combined improvements enable the efficient simulation of reactive transport in fractured media with a high degree of fidelity and the ability to capture the control small-scale processes exert on the overall medium evolution.
Managing landscapes to increase agricultural productivity and environmental stewardship can be informed by spatially-distributed models that operate at spatial and temporal scales that are intervention-relevant. This paper presents Cycles-L, a landscape-scale agroecosystem and hydrologic modeling system, using as a test case a watershed in Pennsylvania. Cycles-L emerges from melding the landscape and hydrology structure of Flux-PIHM, a 3-D land surface hydrologic model, with the agroecosystem processes in the Cycles model. Consequently, Cycles-L can simulate processes affected by topography, soil heterogeneity, and management practices, owing to its physically-based hydrology that can simulate horizontal and vertical transport of solutes with water. The model was tested at a 730-ha experimental watershed within the Mahantango Creek watershed. Cycles-L simulated well stream water and mineral nitrogen discharge (Nash-Sutcliffe coefficient 0.55 and 0.60, respectively) and grain yield (root mean square error 1.2 Mg ha -1 ). Cycles-L outputs are as good or better than those obtained with the uncoupled Flux-PIHM (water discharge) and Cycles (grain yield) models. Modeled spatial patterns of nitrogen fluxes like denitrification illustrate the combined control of crop management and topography. For example, denitrification is almost twice as high when simulated with Cycles-L than when simulated with Cycles 1-D. Due to its spatial and temporal resolution, Cycles-L fills a gap in the availability of models that operate at a scale relevant to evaluate interventions in the landscape. Cycles-L can become a central component in tools for climate change scenario analysis, precision agriculture, precision conservation, and artificial intelligence-based decision support systems.
The terrestrial dycores will solve tightly coupled conservation of water and energy equations. While the land dycore will simulate processes for a three-dimensional subsurface coupled to a one-dimensional plant’s vascular system, the river dycore will simulate two-dimensional processes in the river.
We summarize TCAD design studies for double sided thick buried layer Low Gain Avalanche Diodes (LGADs). These thick double sided devices introduce new features that require overall optimization. We describe both the parameterized and full process simulation and discuss how the results affect the range of process and LGAD physical parameters.
Radiance matrix-based methods enable efficient parametric simulations, allowing users to vary sky conditions, fenestration systems, and other model parameters at a minimal cost to computation. However, the steep learning curve and complex workflow hinder the widespread adoption of matrix-based methods. The frads Python library with a series of command-line tools was developed to automate the entire matrix-based simulation process, lowering entry barriers and reducing human error. Co-simulation between EnergyPlus and Radiance was also enabled using the Python library from EnergyPlus. Key Innovations • Command-line based automation of Radiance matrix-based simulation methods • Python library facilitates broader adoption of Radiance matrix-based simulation methods • Radiance EnergyPlus run-time integration enabling the modeling of advanced control systems Practical Implications The frads library, with associated command-line tools, provides practitioners with the capability to easily adopt and use Radiance matrix-based simulation methods for various daylighting, solar control, and energy-related evaluations. Frads' current form is designed for 1) users familiar with a command-line interface and 2) software developers to integrate the matrix-based methods into existing software packages.