SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
During the last several years, several of the technology items associated with these two national instruments have been prototyped. In this paper, the science rationales, the instrument design concept, and the technology status for these national systems will be presented.
During the last decade, the utility of spaceborne microwave remote sensing systems for ocean windspeed measurement, ocean wave imaging and sea ice studies was demonstrated. Development of large space antennas offers some interesting possibilities for rain rate measurements, ocean and ice studies, and radar imaging. The joint use of active and passive sensors using the 15 m antenna for ocean, ice, and soil moisture studies; rain rate measurements; and radar imaging is considered. Verification of the frequency agile rain radar concept with Shuttle offers the possibility of much needed rain rate statistics over the ocean.
Innovative designs of a space-based laser remote sensing 'wind machine' are presented. These designs seek compatibility with the traditionally conflicting constraints of high scientific value and low total mission cost. Mission cost is reduced by moving to smaller, lighter, more off-the-shelf instrument designs which can be accommodated on smaller launch vehicles.
The area accessible from a spaceborne imaging radar, e.g. a synthetic aperture radar (SAR), generally increases with the elevation of the satellite while the map coverage rate is a more complicated function of platform velocity and beam agility. The coverage of a low Earth orbit (LEO) satellite is basically given by the fast ground velocity times the relatively narrow swath width. The instantaneously accessible area will be limited to some hundreds of kilometers away from the sub-satellite point. In the other extreme, the sub-satellite point of a SAR in geosynchronous orbit will move relatively slowly, while the area which can be accessed at any given time is very large, reaching thousands of kilometers from the subsatellite point. To effective1y use the accessibility provided by a high vantage point, very large antennas with electronically steered beams are required.
LADAR Vision Technology at Autonomous Technologies Corporation consists of two sensor/processing technology elements: high performance long range multifunction coherent Doppler laser radar (LADAR) technology; and short range integrated CCD camera with direct detection laser ranging sensors. Algorithms and specific signal processing implementations have been simulated for both sensor/processing approaches to position and attitude tracking applicable to AR&C. Experimental data supporting certain sensor measurement accuracies have been generated.
The Air Force Manufacturing Technology program is involved with the improvement of radar transmit/receive modules for use in active phased array radars for advanced fighter aircraft. Improvements in all areas of manufacture and test of these modules resulting in order of magnitude improvements in the cost of and the rate of production are addressed, as well as the ongoing transfer of this technology to the Navy.
A parallel is drawn between the evolution of the bat and the evolution of the science and technology of radar and remote sensing to illustrate the importance of the role of Darwinian processes in the culture and practice of science and technology, and thus in the survival of their vitality. The lecture touches on several themes of interest to the science community, such as the relation between basic and applied science and engineering; research in academia, industry, and government laboratories; elite scientists; and the survival of a scientific institution.
We are seeing interesting changes in airspace operations. We are experiencing growth in global aviation for passenger and cargo travel. At the same time, drones of all sizes, urban air mobility, electric aircraft, commercial space transportation, supersonics, hypersonics, and increasingly autonomous vehicles will continue to mature. These operations along with current aviation will require access to airspace operations. Such access and scalability needs will only continue to increase in the future. Given that systems and procedures that will enable and support the future density and diversity takes a considerable amount of time to build and harmonize across the globe, it is appropriate that research efforts to enable 2045 operations begin now. A perfect storm is brewing as a number of factors are coming together, including: anticipated growth in diversity and density; limitations of our current system to support the growth and diversity; lack of utilization of latest technologies in an increasingly digitized world to support air traffic management; and a long lead time to conduct research, develop requirements, and built and deploy air traffic management systems. All these factors indicate that now is the time to start thinking about the needs of 2045 and beyond. In a limited manner, Unmanned Aircraft System Traffic Management (UTM) has shown that new thinking and implementation paths for airspace operations is possible. The current system as it exists is based on many assumptions and limitations of technologies (e.g., radar, human-centered voice communications) which may not be true moving forward given the technologies around us are changing. The panel will discuss the following and related topics: 1. Expected growth in density, diversity, and needed scalability, 2. Likely requirements of air traffic management system to enable and support 2045 and beyond operations, 3. Assumptions related to air traffic management and operations that need to reevaluated based on technology trends, 4. Identification of research priorities and harmonization of research across the globe, and 5. Transition approaches from current air traffic operations to new vision 2045. The panel discussion will be useful for global air traffic management researchers, managers, strategists, airspace users, air traffic management system developers and integrators, and academic researchers.
The emerging technology of electromagnetic probing of the atmosphere to measure winds used in a space vehicle ascent winds load calculations is presented. The frequency range, altitude, and resolution for the following probes are presented: lidars, microwave radars, and clear-air Doppler radars (popularly known as wind profilers). The electromagnetic probing of the atmosphere by clear-air radars and lasers is the new technology to supplement balloon-borne wind sensors used to determine ascent wind loads of space vehicles. The electromagnetic probes measure the wind velocity using the Doppler effect. This is the radar technology used in MSFC's Radar Wind Profiler, and is similar to the technology used in conventional Doppler systems except that the frequency is generally lower, antenna is bigger, and dwell time much longer. Designed for unattended and automated instrumentation in providing measurements of the wind in the troposphere, the profiler employs Doppler radar technology and is currently being put in operation at NASA Kennedy Space Center, Florida.
The higher output power densities required of modern radar architectures, such as the proposed DESDynI [Deformation, Ecosystem Structure, and Dynamics of Ice] SAR [Synthetic Aperture Radar] Instrument (or DSI) require increasingly dense high power electronics. To enable these higher power densities, while maintaining or even improving hardware reliability, requires advances in integrating advanced thermal packaging technologies into radar transmit/receive (TR) modules. New materials and techniques have been studied and compared to standard technologies.
Advanced Digital Beamforming (DBF) Synthetic Aperture Radar (SAR) technology is an area of research and development pursued at the NASA Goddard Space Flight Center (GSFC). Advanced SAR architectures enhances radar performance and opens a new set of capabilities in radar remote sensing. DBSAR-2 and EcoSAR are two state-of-the-art radar systems recently developed and tested. These new instruments employ multiple input-multiple output (MIMO) architectures characterized by multi-mode operation, software defined waveform generation, digital beamforming, and configurable radar parameters. The instruments have been developed to support several disciplines in Earth and Planetary sciences. This paper describes the radars advanced features and report on the latest SAR processing and calibration efforts.
The higher output power densities required of modern radar architectures, such as the proposed DESDynI [Deformation, Ecosystem Structure, and Dynamics of Ice] SAR [Synthetic Aperture Radar] Instrument (or DSI) require increasingly dense high power electronics. To enable these higher power densities, while maintaining or even improving hardware reliability, requires improvements in integrating advanced thermal packaging technologies into radar transmit/receive (TR) modules. New materials and techniques have been studied and are now being implemented side-by-side with more standard technology typically used in flight hardware.
Explore the source record for details and available documents.
The Global Precipitation Mission (GPM)is currently being developed as a follow-on to the Tropical Ranifall Measuring Mission (TRMM).
The general approach and products of the NASA/FAA Airborne Windshear Program conducted by NASA Langley Research Center are summarized, with references provided for the major technical contributions. During this period, NASA conducted 2 years of flight testing to characterize forward-looking sensor performance. The NASA/FAA Airborne Windshear Program was divided into three main elements: Hazard Characterization, Sensor Technology, and Flight Management Systems. Simulation models developed under the Hazard Characterization element are correlated with flight test data. Flight test results comparing the performance and characteristics of the various Sensor Technologies (microwave radar, lidar, and infrared) are presented. Most of the activities in the Flight Management Systems element were conducted in simulation. Simulation results from a study evaluating windshear crew procedures and displays for forward-looking sensor-equipped airplanes are discussed. NASA Langley researchers participated heavily in the FAA process of generating certification guidelines for predictive windshear detection systems. NASA participants felt that more valuable technology products were generated by the program because of this interaction. NASA involvement in the process and the resulting impact on products and technology transfer are discussed in this paper.
This report presents new algorithms for target detection, feature extraction, and image formation with the synthetic aperture radar (SAR) technology. For target detection, we consider target detection with SAR and coherent subtraction. We also study how the image false alarm rates are related to the target template false alarm rates when target templates are used for target detection. For feature extraction from SAR images, we present a computationally efficient eigenstructure-based 2D-MODE algorithm for two-dimensional frequency estimation. For SAR image formation, we present a robust parametric data model for estimating high resolution range signatures of radar targets and for forming high resolution SAR images.
Applications of Synthetic Aperture Radar (SAR) technology to the observation of coastal zones phenomena are detailed. The conditions observed include gravity wave detection, surf zone location, surface currents, and long-period 'surf beats'. Algorithms have been developed and successfully tested that determine significant wave and current parameters from the sea surface backscatter of microwave energy. Doppler information from the SAR optical correlator allows a rough estimation of near shore surface flow velocities that has been found in agreement with both theory and in situ observations as well. Seasat SAR data of the Scotland and North Carolina coasts are considered, as well as the results of bathymetric updating of coastal area charts.
The bibliography contains citations concerning the design, development, testing, and evaluation of bistatic and multistatic radar used in surveillance and countermeasure technology. Citations discuss radar cross sections, target recognition and characteristics, ghost recognition, motion image compensation, and wavelet analysis. Stealth aircraft design, stealth target tracking, synthetic aperture radar, and space applications are examined.