Search NASA⌕ Search

SEARCH · Search NASA

Results for “scratch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

A Simulation Resource Team for Innovative Fusion Concepts

This project created a shared simulation resource for innovative fusion concepts at the University of Rochester, built around the FLASH, TriForce, OSIRIS, and OSHUN codes. Many promising fusion approaches are too complex to evaluate by experiment alone yet building a custom simulation capability from scratch for each new concept is expensive and slow. The BETHE Simulation Resource Team addressed this problem by developing and validating a flexible set of numerical tools, which were then applied across three major concept areas: plasma-jet-driven magneto-inertial fusion, staged Z pinches, and field-reversed configurations. The team assisted three concept teams and carried out independent analyses of all three concepts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

High Strength and Fracture Resistance of Reduced-Activity W-Ta-Ti-V-Zr High-Entropy Alloy for Fusion Energy Applications

Refractory high-entropy alloys (HEAs) are promising candidates for next-generation nuclear applications, particularly fusion reactors, due to their excellent high-temperature mechanical properties and irradiation resistance. Here, the microstructure and mechanical behavior were investigated for an equimolar WTaTiVZr HEA, designed from a palette of low-activation elements. The as-cast alloy exhibited a dendritic microstructure composed of W-Ta rich dendrites and Zr-Ti-V rich inter-dendritic regions, both possessing a body-centered cubic (BCC) crystal structure. Room temperature bulk compression tests showed ultra-high strength of around 1.6 GPa and plastic strain ~6%, with fracture surfaces showing cleavage facets. The alloy also demonstrated excellent high-temperature strength of ~650 MPa at 500 °C. Scratch-based fracture toughness was ~38 MPa√m for the as-cast WTaTiVZr HEA compared to ~25 MPa√m for commercially used pure tungsten. This higher value of fracture toughness indicates superior damage tolerance relative to commercially used pure tungsten. These results highlight the alloy’s potential as a low-activation structural material for high-temperature plasma-facing components (PFCs) in fusion reactors.

Physics↗
DOE OSTI2025

Huge ensembles – Part 2: Properties of a huge ensemble of hindcasts generated with spherical Fourier neural operators

Abstract. In Part 1, we created an ensemble based on spherical Fourier neural operators. As initial condition perturbations, we used bred vectors, and as model perturbations, we used multiple checkpoints trained independently from scratch. Based on diagnostics that assess the ensemble's physical fidelity, our ensemble has comparable performance to operational weather forecasting systems. However, it requires orders-of-magnitude fewer computational resources. Here in Part 2, we generate a huge ensemble (HENS), with 7424 members initialized each day of summer 2023. We enumerate the technical requirements for running huge ensembles at this scale. HENS precisely samples the tails of the forecast distribution and presents a detailed sampling of internal variability. HENS has two primary applications: (1) as a large dataset with which to study the statistics and drivers of extreme weather and (2) as a weather forecasting system. For extreme climate statistics, HENS samples events 4σ away from the ensemble mean. At each grid cell, HENS increases the skill of the most accurate ensemble member and enhances coverage of possible future trajectories. As a weather forecasting model, HENS issues extreme weather forecasts with better uncertainty quantification. It also reduces the probability of outlier events, in which the verification value lies outside the ensemble forecast distribution.

Mahesh, Ankur↗
NASA NTRS1966

Copper-acrylic enamel serves as lubricant for cold drawing of refractory metals

Acrylic enamel spray containing metallic copper pigment lubricates refractory metal tubing during cold drawing operations so that the tubing surface remains free from scratches and nicks and does not seize in the die. Zirconium alloys, zirconium, tantalum alloys, niobium alloys, vanandium alloys and titanium alloys have been drawn using this lubricant.

Beane, C.↗
NASA NTRS1967

Surface-crack detection by microwave methods

Microwave surface-crack detection system examines metallic surfaces with a noncontacting probe. The change in the microwave signal reflected from the surface under investigation is an indication of the existence of surface flaws. This technique can detect flaws and scratches as small as 100 microinches.

Feinstein, L.↗
NASA NTRS1969

Semiautomatic inspection of microfilm records

Semiautomatic machine inspects microfilm for deficiencies. Advantages of microfilm inspector are uniformity of inspection method, increased speed of inspection, and improved quality through elimination of scratches and finger marks.

Klein, E. L.↗
NASA NTRS1969

Pneumatic mirror support system

The invention is directed to a support system for the primary mirror of a telescope or telespectrograph. The pneumatic support system is primarily adapted to support of the primary mirror which is generally of a large dimension and of a frangible material which requires that the mirror not be scratched or unduly restricted from movement.

Kenneth L Kemp↗
NASA NTRS1970

Salvaging surface-damaged aluminum castings

Repair operation for damaged aluminum parts includes anodizing the part, removing the oxide layer, filling the pit or scratch with copper, capping the fill with cadmium, and hand polishing.

Hanna, T. L.↗
NASA NTRS1972

Design and fabrication of prototype system for early warning of impending bearing failure

Ball bearing performance tests run on several identical ball bearings under a variety of load, speed, temperature, and lubrication conditions are reported. Bearing temperature, torque, vibration, noise, strain, cage speed, etc., were monitored to establish those measurements most suitable as indicators of ball bearing health. Tape records were made under steady-state conditions of a variety of speeds and loads. Sample sections were selected for narrowband spectral analysis with a real time analyzer. An artificial flow was created across the inner race surface of one bearing using an acid etch technique to produce the scratch. Tape records obtained before and after established a characteristic frequency response that identifies the presence of the flow. The signals found most useful as indicators of performance degradation were ultrasonic outputs.

Broderick, J. J.↗
NASA NTRS1973

Glass encapsulation provides extra protection for IC semiconductor devices

Oxide-passivated semiconductor chip is given protective glass coating by means of vapor deposition over metallic substrate of integrated circuit (IC). Method provides more reliable oxide-passivation and hermetic sealing in current use. Chips and scratches incurred during dicing, testing, and assembly are markedly reduced.

Doelp, W. L., Jr.↗
NASA NTRS1973

Preliminary measurements on heat balance in pneumatic tires

A variety of tests was undertaken to determine the nature of heat generation associated with a pneumatic tire operating under various conditions. Tests were conducted to determine the magnitude and distribution of internally generated heat caused by hysteresis in the rubber and ply fabric in an automobile tire operating under conditions of load, pressure, and velocity representative of normal operating conditions. These included tests at various yaw angles and tests with braking applied. In other tests, temperature sensors were mounted on a road to measure the effect of a tire rolling over and an attempt was made to deduce the magnitude and nature of interfacial friction from the resulting information. In addition, tests were performed using the scratch plate technique to determine the nature of the motion between the tire and road. Finally, a model tire was tested on a roadwheel, the surface covering which could be changed, and an optical pyrometer was used to measure rubber surface temperatures.

Nybakken, G. H.↗
NASA NTRS1973

The nature of dark-etching rims in meteoritic taenite.

Taenite fields when etched develop a cloudy brown rim with approximate compositional limits of 25 and 40% Ni. In iron meteorites this cloudy zone is only a few microns wide, with a sharp, high-Ni edge about 1 micron from the kamacite interface and a diffuse edge several microns from the central plessite. It is always present in irons unless the meteorite has been cosmically or terrestrially reheated. X-ray and electron diffraction of grains scratched from exceptionally larger areas of cloudy taenite in the mesosiderite Estherville show that this etching zone contains a fine exsolution of kamacite. Detailed electron-probe investigations of taenite in Estherville show that there is a step in the M-shaped Ni profile at the sharp, high-Ni edge of the cloudy region, the Ni dropping suddenly from approximately 45 to 42%. It is proposed that exsolution in the cloudy region effectively froze in the Ni profile at that temperature. On subsequent cooling only the clear outer taenite continued to equilibrate with the kamacite matrix, producing the kink in the M profile. Cloudy taenite is therefore a variety of plessite differing from the usual varieties in that it forms at lower temperatures in areas much richer in Ni, and the morphology is not crystallographically oriented. Its absence can provide a sensitive indication of reheating.

Scott, E. R. D.↗
NASA NTRS1974

Surface roughness measured by optical signatures

To measure roughness of metal surfaces by nondestructive means direct laser beam at surface and record distribution pattern of intensity of reflected light to obtain optical signature for comparison with calibrated surface. Signature of machined surface with scratch compared to that of regularly-patterned machined surface may also detect imperfections.

Salvinski, R. J.↗
NASA NTRS1974

Inspection of transparent surfaces using photosensitive paper

Window surface is laid flat on top of photosensitive paper. Opposite side of glass is covered by black cloth. Window edges are then illuminated by light flash through fiber optics. Exposed paper is processed and inspected. Paper shows scratches, bubbles, dust particles, and fingerprints on glass surface.

Minton, F. R.↗
NASA NTRS1974

Low scatter lens design/development

The criteria for the optimum design of optical systems are discussed along with the selection of appropriate materials. The construction details of low scatter lens systems are tabulated. Scattering analysis; total energy diffracted; and computation of delta for a scratch, bubble, and microscopic irregularities are also discussed.

Gallipeau, R. B.↗