Search NASA⌕ Search

SEARCH · Search NASA

Results for “stripes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

A new device for acquiring ground truth on the absorption of light by turbid waters

The author has identified the following significant results. A new device, called a Spectral Attenuation Board, has been designed and tested, which enables ERTS-1 sea truth collection teams to monitor the attenuation depths of three colors continuously, as the board is being towed behind a boat. The device consists of a 1.2 x 1.2 meter flat board held below the surface of the water at a fixed angle to the surface of the water. A camera mounted above the water takes photographs of the board. The resulting film image is analyzed by a micro-densitometer trace along the descending portion of the board. This yields information on the rate of attenuation of light penetrating the water column and the Secchi depth. Red and green stripes were painted on the white board to approximate band 4 and band 5 of the ERTS MSS so that information on the rate of light absorption by the water column of light in these regions of the visible spectrum could be concurrently measured. It was found that information from a red, green, and white stripe may serve to fingerprint the composition of the water mass. A number of these devices, when automated, could also be distributed over a large region to provide a cheap method of obtaining valuable satellite ground truth data at present time intervals.

Klemas, V.↗
NASA NTRS1976

Unichromatic-carrier color-TV system

Optical system consists of two filter layers with each layer composed of transparent stripes alternating with dichroic color filter strips. System produces color multiplexed light signal by vertically orienting dichroic filter stripes perpendicular to scan lines of image tube.

Vorhaben, K. H.↗
NASA NTRS1980

Visually induced self-motion sensation adapts rapidly to left-right visual reversal

The experimental demonstration of a reversal of the circularvection (CV) phenomenon is reported. After one to three hours of active movement while wearing vision-reversing goggles, 9 of 12 stationary human subjects viewing a moving stripe display experienced a self-rotation illusion in the same direction as the seen stripe motion. In addition, the subjects showed a 17% reduction in vestibulo-ocular reflex slow phase gain over their brief exposure period. It is noted that whether a subject demonstrated reversed CV within the allowed exposure period appeared to be correlated with CV strength produced with a narrow field stimulus.

Oman, C. M.↗
NASA NTRS1980

Investigation of multilayer magnetic domain lattice file

The feasibility of the self structured multilayered bubble domain memory as a mass memory medium for satellite applications is examined. Theoretical considerations of multilayer bubble supporting materials are presented, in addition to the experimental evaluation of current accessed circuitry for various memory functions. The design, fabrication, and test of four device designs is described, and a recommended memory storage area configuration is presented. Memory functions which were demonstrated include the current accessed propagation of bubble domains and stripe domains, pinning of stripe domain ends, generation of single and double bubbles, generation of arrays of coexisting strip and bubble domains in a single garnet layer, and demonstration of different values of the strip out field for single and double bubbles indicating adequate margins for data detection. All functions necessary to develop a multilayer self structured bubble memory device were demonstrated in individual experiments.

Torok, E. J.↗
NASA NTRS1981

Development of lead salt semiconductor lasers for the 9-17 micron spectral region

Improved diode lasers of Pb sub 1-x Sn sub x Se operating in the 9-17 micrometers spectral region were developed. The performance characteristics of the best lasers exceeded the contract goals of 500 microW/mode at T 30K in the 9-12 micrometers region and 200 microW/mode at T 18K in the 16-17 micrometers region. Increased reliability and device yields resulted from processing improvements which evolved from a series of diagnostic studies. By means of Auger electron spectroscopy, laser shelf storage degradation was shown to be characterized by the presence of In metal on the semiconductor crystal surfaces. Studies of various metal barrier layers between the crystals and the In metal led to the development of an improved metallurgical contacting technology which has resulted in devices with performance stability values exceeding the contract goal of a one year shelf life. Lasers cycled over 500 times between 300K and 77K were also shown to be stable. Studies on improved methods of fabricating striped geometry lasers indicated that good spectral mode characteristics resulted from lasers which stripe widths of 12 and 25 micrometers.

Linden, K. J.↗
NASA NTRS1981

Visually induced self-motion sensation adapts rapidly to left-right reversal of vision

Three experiments were conducted using 15 adult volunteers with no overt oculomotor or vestibular disorders. In all experiments, left-right vision reversal was achieved using prism goggles, which permitted a binocular field of vision subtending approximately 45 deg horizontally and 28 deg vertically. In all experiments, circularvection (CV) was tested before and immediately after a period of exposure to reversed vision. After one to three hours of active movement while wearing vision-reversing goggles, 10 of 15 (stationary) human subjects viewing a moving stripe display experienced a self-rotation illusion in the same direction as seen stripe motion, rather than in the opposite (normal) direction, demonstrating that the central neural pathways that process visual self-rotation cues can undergo rapid adaptive modification.

Oman, C. M.↗
NASA NTRS1984

Modified Fabrication for InGaAsP Strip Laser

Improved fabrication of InGaAsP stripe lasers involves replacement of oxide stripe in quaternary laser by an n-type layer of InP grown on top of quaternary cap layer. Process allows use of stop etch that selectively removes InP and does not etch InGaAsP, making fabrication especially convenient.

Ladany, I.↗
NASA NTRS1982

MAGSAT and aeromagnetic data of the continental US

The MAGSAT data were used to produce a scalar anomaly map of the U.S. In order to remove the east-west striping anomalies, which are believed to be caused by the low-order polynomials used to reduce the orbital bias errors, a 2-D spectral filtering using the Fourier transform method was applied. The resultant low-pass filtered map, with the east-west stripings removed, resembles much closer the surface aeromagnetic map based on the U.S. MAGNET data. The spectral filtering was also applied to the MAGSAT vector data. Department of Defense gravity data was processed to produce a filtered U.S. gravity map whose spectral contents are comparable to those of the MAGSAT magnetic map.

Won, I. J.↗
NASA NTRS1982

The geology of Europa

The map units and lineations of Europa are detailed, and the geologic processes, and history, and thick and thin ice models of the satellite are discussed. It is concluded that Europa lacks evidence of a horizontally stratified crust; the geology appears characterized by disruption of the crust and intrusions into an icy shell. The surface consists of plains and mottled terrain, the former being older. Numerous straight and curved lineations, streaks, stripes, and bands cross EuropA's surface on a global and surface scale. Most lineations appear related to fractures in the crust. Five fresh craters in the 10 to 30 km diameter range are visible. The dark spots, stripes, and bands that appear to have replaced sections of the crust suggest that material was transported to the surface from the subjacent silicate lithosphere. The apparent low density of craters superposed on Europa's surface suggests that the surface is about 100 million years old.

Lucchitta, B. K.↗
NASA NTRS1983

An analysis of new techniqes for radiometric correction of LANDSAT-4 Thematic Mapper images

The utility of methods for generating TM RLUTS which can improve the quality of the resultant images was investigated. The TM-CCT-ADDS tape was changed to account for a different collection window for the calibration data. Several scenes of Terrebonne Bay, Louisiana and the Grand Bahamas were analyzed to evaluate the radiometric corrections operationally applied to the image data and to investigate several techniques for reducing striping in the images. Printer plots for the TM shutter data were produced and detector statistics were compiled and plotted. These statistics included various combinations of the average shutter counts for each scan before and after DC restore for forward and reverse scans. Results show that striping is caused by the detectors becoming saturated when they view a bright cloud and depress the DC restore level.

Kogut, J.↗
NASA NTRS1984

LANDSAT-4 Radiometric and Geometric Correction and Image Enhancement Results

Techniques were developed or improved to calibrate, enhance, and geometrically correct LANDSAT-4 satellite data. Statistical techniques to correct data radiometry were evaluated and were found to minimize striping and banding. Conventional techniques cause striping even with perfect calibration parameters. Intensity enhancement techniques were improved to display image data with large variation in intensity or brightness. Data were geometrically corrected to conform to a 1:100,000 map reference and image products produced with the map overlay. It is shown that these products can serve as accurate map products. A personal computer was experimentally used for digital image processing.

Bernstein, R.↗
NASA NTRS1983

A basic design fault in ceramic flat packs

Recent moisture resistance tests of various multilayer top brazed ceramic flat packs and leaded and unleaded chip carriers has revealed a serious design defect. These packages, which utilize a tungsten interconnect system, in the presence of high humidity, suffer a galvanic corrosion which anodically consumes the tungsten. This process can continue until the package suffers an open circuit. The test results indicate that the lead plating system does not adequately seal off the interface area where the tungsten stripe egresses from the inside of the package. Leaded and leadless chip carrier packages were also subjected to the moisture resistance test. The familiar red and green corrosion products were visible after the test was completed. Careful sectioning of the chip carriers has revealed that the tungsten interconnect stripe instead of exiting under the castellations, exits at the top of the castellation and is thus vulnerable to the attack of moisture. These basic design faults severely impact the reliability of these packages.

Drotman, B.↗
NASA NTRS1984

Validation of the Thematic Mapper radiometric and geometric correction algorithms

The radiometric and geometric correction algorithms for Thematic Mapper are critical to subsequent successful information extraction. Earlier Landsat scanners, known as Multispectral Scanners, produce imagery which exhibits striping due to mismatching of detector gains and biases. Thematic Mapper exhibits the same phenomenon at three levels: detector-to-detector, scan-to-scan, and multiscan striping. The cause of these variations has been traced to variations in the dark current of the detectors. An alternative formulation has been tested and shown to be very satisfactory. Unfortunately, the Thematic Mapper detectors exhibit saturation effects suffered while viewing extensive cloud areas, and is not easily correctable. The geometric correction algorithm has been shown to be remarkably reliable. Only minor and modest improvements are indicated and shown to be effective.

Fischel, D.↗
NASA NTRS1983

Tunable diode lasers for 3-30 micron infrared operation

The tunable diode laser is now widely used in high resolution infrared spectroscopy studies, taking into account laboratory and industrial applications. The present investigation is concerned with advances related to laser performance and reliability. The advances are the result of improvements in materials and device technologies. Reliability data for broad-area Pb(1-x)Sn(x)Se lasers are considered along with performance improvements in stripe-geometry lasers, laser performance at wavelengths above 25 microns, and laser performance at wavelengths below 4 microns. Attention is given to tunable Pb-salt infrared diode lasers, mesa-stripe geometry lasers of Pb(1-x)Sn(x)Se and PbS(1-x)Se(x), and long wavelength diode laser emission observed in both Pb(1-x)Sn(x)Te and Pb(1-x)Sn(x)Se.

Linden, K. J.↗
NASA NTRS1985

Single mode, short cavity, Pb-salt diode lasers operating in the 5, 10, and 30-microns spectral regions

Pb-salt diode lasers are being used as frequency-tunable infrared sources in high resolution spectroscopy and heterodyne detection applications. Recent advances in short cavity, stripe-geometry laser configurations have led to significant increases in maximum CW operating temperature, single mode operation, and increased single mode tuning range. This paper describes short cavity, stripe geometry lasers operating in the 5, 10, and 30-microns spectral regions, with single mode tuning ranges of over 6/cm.

Linden, K. J.↗
NASA NTRS1985

Postlaunch corrections for Thematic Mapper 5 (TM-5) radiometry in the Thematic Mapper Image Processing System (TIPS)

The paper discusses postlaunch corrections made to the calibration lamp radiance values for band 3 of TM-5 (Thematic Mapper instrument on Landsat-5). It is hypothesized that the low in-orbit temperatures have caused the shutter arm to contract slightly, causing the detectors to view the lamps through different parts of the lens system. Owing to unevenness in the lenses this is introducing an odd-even channel discrepancy in the computed gains, resulting in striped imagery. The process used to compute the new values is presented along with supporting data and the old and new radiance numbers. The new values solve the relative radiometric correction problem of striping. However, the effect on the absolute radiometric correction performance is not quantitatively known.

Singh, A.↗
NASA NTRS1987

Tunable Dual Semiconductor Laser

Parallel lasers interact in shared space to alter output wavelength. New device consists of two stripe lasers in aluminum gallium arsenide chip. Parallel stripes close enough so light from lower laser coupled into upper laser and vice versa. Lasers operated by low-duty-cycle current pulses. Lasing threshold of each about 100 mA. Currents controlled independently. Useful in optical communications systems employing wavelength-division multiplexing.

Mukai, Seiji↗
NASA NTRS1986

Airborne spectroradiometry: The application of AIS data to detecting subtle mineral absorption features

Analysis of Airborne Imaging Spectrometer (AIS) data acquired in Australia has revealed a number of operational problems. Horizontal striping in AIS imagery and spectral distortions due to order overlap were investigated. Horizontal striping, caused by grating position errors can be removed with little or no effect on spectral details. Order overlap remains a problem that seriously compromises identification of subtle mineral absorption features within AIS spectra. A spectrometric model of the AIS was developed to assist in identifying spurious spectral features, and will be used in efforts to restore the spectral integrity of the data.

Cocks, T. D.↗