Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable free”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Autonomous Aerobraking at Mars

Aerobraking has become a proven approach for orbital missions at Mars. A launch of a 1000 kg class spacecraft on a Delta class booster saves 90% of the post-MOI fuel otherwise required to circularize the orbit. In 1997, Mars Global Surveyor demonstrated the feasibility and Mars 2001 Odyssey completed a nearly trouble free aerobraking phase in January 2002. In 2006, Mars Reconnaissance Orbiter will also utilize aerobraking. From the flight operations standpoint, however, aerobraking is labor intensive and high risk due to the large density variability in the Mars thermosphere. The maximum rate of aerobraking is typically limited by the maximum allowable temperature of the solar array which is the primary drag surface. Prior missions have used a surrogate variable, usually maximum free stream heat flux, as a basis for performing periapsis altitude corridor control maneuvers. This paper provides an adaptive sequential method for operationally relating measured temperatures to heat flux profile characteristics and performing maneuvers based directly on measured temperatures and atmospheric properties derived from the heat flux profiles. Simulations of autonomous aerobraking are performed using Odyssey mission data.

Hanna, Jill L.↗

Calculation of compressible turbulent free shear layers

Rudy and Bushnell's (1972) mixing length theory for the prediction of mean velocity fields in turbulent shear layers is extended to include supersonic free turbulent mixing. The normal momentum equation is coupled with the conventional equations of motion and is solved iteratively. Results show that transverse static pressure variation has very little effect on the mean flow variables in compressible free turbulent shear layers.

Oh, Y. H.↗

Western US Tropospheric Ozone: An Assessment of Vertical and Seasonal Variations over California and Nevada

In the rural western US free-tropospheric O3 has risen in recent years as a result of rising Asian emissions, deep stratospheric intrusions and more frequent wildfires. This increasing O3 trend combined with the high surface elevation of much of the western US, which aids mixing between boundary layer and free-troposphere, pose challenges in attaining the more stringent O3 National Ambient Air Quality Standard (NAAQS) at many western US rural surface sites. As such, the ability to identify various sources and transport mechanisms that contribute towards surface O3 is increasingly important. This paper analyzes vertical profiles of O3 from the Alpha Jet Atmospheric eXperiment (AJAX) over California and Nevada, ozonesondes from Trinidad Head, CA and tropospheric ozone profiles from the differential absorption lidar (DIAL) at the JPL Table Mountain Facility, CA. Surface O3 from the US EPA Clean air Status and Trends Network (CASNET) are used to discuss surface trends. GEOS-Chem determines the trends in regional O3 and assess the contributions of various sources on surface O3. And Realtime Air Quality Modeling System (RAQMS) is used to forecast and interpret free-tropospheric observations. Specifically we will address the following questions: What are the effects of the lowered NAAQS? Do we observe elevated O3 during 2012 at surface sites reported in previous studies? And if so, what are the causes? How variable is free-tropospheric O3 over California and Nevada? How frequently do we observe high O3 lamina in the free troposphere and what are the surface impacts?

tropospheric↗

Regarding Nonstationary Quadratic Quantum Systems

With the help of the evolution operator method, we have established unitary connection between quadratic systems, namely between a free particle with variable mass M(t) , a particle with variable mass M(t) in a variable homogeneous field, and a harmonic oscillator with variable mass M(t) and frequency ω(t) , on which a variable force F(t) acts. Knowledge of the unitary connection allowed us to express easily in general form the propagators, invariants, wave functions, and other functions of a linear potential and a harmonic oscillator in terms of the corresponding quantities for a free particle. We have analyzed the linear and quadratic invariants in detail. Results known in the literature follow as particular cases from the general results obtained here.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Free-standing optical gold bowtie nanoantenna with variable gap size for enhanced Raman spectroscopy

We describe plasmonic interactions in suspended gold bowtie nanoantenna leading to strong electromagnetic field (E) enhancements. Surface enhanced Raman scattering (SERS) was used to demonstrate the performance of the nanoantenna. In addition to the well known gap size dependence, up to two orders of magnitude additional enhancement is observed with elevated bowties. The overall behavior is described by a SERS enhancement factor exceeding 10^11 along with an anomalously weak power law dependence of E on the gap size in a range from 8 to 50 nm that is attributed to a plasmonic nanocavity effect occurring when the plasmonic interactions enter a strongly coupled regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of a compact hard x-ray split-delay system based on variable-gap channelcut crystals

Free Electron Lasers provide unique opportunities in investigating ultrafast atomic-scale dynamics using X-ray Pump X-ray Probe and two-pulse X-ray Speckle Visibility Spectroscopy techniques. However the performance of these techniques critically relies on maintaining the spatial overlap between the two beams at the sample location while adjusting the temporal separation between the two pulses. This presents major challenges for realizing hard X-ray split-delay optics, i.e an optical arrangement capable of generating two X-ray pulses separated in time from a single X-ray pulse. More specifically, it translates into nanoradian-scale angular precision requirements. We present here a hard X-ray split-delay optics concept using 4 channelcut crystals, where the beam path length difference can be adjusted by the linear translation of two crystals having non-parallel gaps. Having two Bragg reflections from the same monolithic crystal in the opposite direction cancels positioning errors from underlying stages. As a result, this concept has lower motion precision requirements on the hardware, and yet leads to significantly higher output beam angular stability. We present a case study for this concept that covers an energy range from 7 to 12 keV and provides a delay range from -3 to 10 ps at 9 keV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The evaluation of atomic variables in MACSYMA

Evaluation free expressions, implicit and explicit assignment, and evaluation of MACSYMA are outlined. MACSYMA options, EV command, single level evaluation, and multilevel evaluation are also considered.

Golden, J. P.↗

Variability of Solar Radiation under Cloud-Free Skies in China: The Role of Aerosols

In this study, we analyzed long-term surface global and diffuse solar radiation, aerosol single scattering albedo (SSA), and relative humidity (RH) from China. Our analysis reveals that much of China experienced significant decreases in global solar radiation (GSR) and increases in diffuse solar radiation under cloud-free skies between the 1960s and 1980s. With RH and aerosol SSA being rather constant during that time period, we suggest that the increasing aerosol loading from emission of pollutants is responsible for the observed reduced GSR and increased diffuse radiation in cloud-free skies. Although pollutant emissions continue to increase after the 1980s, the increment of aerosol SSA since 1980s can partly explain the transition of GSR from a decreasing trend to no apparent trend around that time. Preliminary analysis is also provided on the potential role of RH in affecting the global and diffuse solar radiation reaching the earth surface.

Qian, Yun↗

Lifestyle Evolution in Cyanobacterial Symbionts of Sponges

The “Candidatus Synechococcus spongiarum” group includes different clades of cyanobacteria with high 16S rRNA sequence identity (~99%) and is the most abundant and widespread cyanobacterial symbiont of marine sponges. The first draft genome of a “Ca. Synechococcus spongiarum” group member was recently published, providing evidence of genome reduction by loss of genes involved in several nonessential functions. However, “Ca. Synechococcus spongiarum” includes a variety of clades that may differ widely in genomic repertoire and consequently in physiology and symbiotic function. Here, we present three additional draft genomes of “Ca. Synechococcus spongiarum,” each from a different clade. By comparing all four symbiont genomes to those of free-living cyanobacteria, we revealed general adaptations to life inside sponges and specific adaptations of each phylotype. Symbiont genomes shared about half of their total number of coding genes. Common traits of “Ca. Synechococcus spongiarum” members were a high abundance of DNA modification and recombination genes and a reduction in genes involved in inorganic ion transport and metabolism, cell wall biogenesis, and signal transduction mechanisms. Moreover, these symbionts were characterized by a reduced number of antioxidant enzymes and low-weight peptides of photosystem II compared to their free-living relatives. Variability within the “Ca. Synechococcus spongiarum” group was mostly related to immune system features, potential for siderophore-mediated iron transport, and dependency on methionine from external sources. The common absence of genes involved in synthesis of residues, typical of the O antigen of free-living Synechococcus species, suggests a novel mechanism utilized by these symbionts to avoid sponge predation and phage attack.

59 BASIC BIOLOGICAL SCIENCES↗

SU-E-T-155: Calibration of Variable Longitudinal Strength 103Pd Brachytherapy Sources

Purpose: Brachytherapy sources with variable longitudinal strength (VLS) allow for a customized intensity along the length of the source. These have applications in focal brachytherapy treatments of prostate cancer where dose boosting can be achieved through modulation of intra-source strengths. This work focused on development of a calibration methodology for VLS sources based on measurements and Monte Carlo (MC) simulations of five 1 cm {sup 10} {sup 3}Pd sources each containing four regions of variable {sup 103}Pd strength. Methods: The air-kerma strengths of the sources were measured with a variable-aperture free-air chamber (VAFAC). Source strengths were also measured using a well chamber. The in-air azimuthal and polar anisotropy of the sources were measured by rotating them in front of a NaI scintillation detector and were calculated with MC simulations. Azimuthal anisotropy results were normalized to their mean intensity values. Polar anisotropy results were normalized to their average transverse axis intensity values. The relative longitudinal strengths of the sources were measured via on-contact irradiations with radiochromic film, and were calculated with MC simulations. Results: The variable {sup 103}Pd loading of the sources was validated by VAFAC and well chamber measurements. Ratios of VAFAC air-kerma strengths and well chamber responses were within ±1.3% for all sources. Azimuthal anisotropy results indicated that ≥95% of the normalized values for all sources were within ±1.7% of the mean values. Polar anisotropy results indicated variations within ±0.3% for a ±7.6° angular region with respect to the source transverse axis. Locations and intensities of the {sup 103}Pd regions were validated by radiochromic film measurements and MC simulations. Conclusion: The calibration methodology developed in this work confirms that the VLS sources investigated have a high level of polar uniformity, and that the strength and longitudinal intensity can be verified experimentally and through MC simulations. {sup 103}Pd sources were provided by CivaTech Oncology, Inc.

07 ISOTOPE AND RADIATION SOURCES↗

Computation of the free energy due to electron density fluctuation of a solute in solution: A QM/MM method with perturbation approach combined with a theory of solutions

We developed a perturbation approach to compute solvation free energy Δμ within the framework of QM (quantum mechanical)/MM (molecular mechanical) method combined with a theory of energy representation (QM/MM-ER). The energy shift η of the whole system due to the electronic polarization of the solute is evaluated using the second-order perturbation theory (PT2), where the electric field formed by surrounding solvent molecules is treated as the perturbation to the electronic Hamiltonian of the isolated solute. The point of our approach is that the energy shift η, thus obtained, is to be adopted for a novel energy coordinate of the distribution functions which serve as fundamental variables in the free energy functional developed in our previous work. The most time-consuming part in the QM/MM-ER simulation can be, thus, avoided without serious loss of accuracy. For our benchmark set of molecules, it is demonstrated that the PT2 approach coupled with QM/MM-ER gives hydration free energies in excellent agreements with those given by the conventional method utilizing the Kohn-Sham SCF procedure except for a few molecules in the benchmark set. A variant of the approach is also proposed to deal with such difficulties associated with the problematic systems. The present approach is also advantageous to parallel implementations. We examined the parallel efficiency of our PT2 code on multi-core processors and found that the speedup increases almost linearly with respect to the number of cores. Thus, it was demonstrated that QM/MM-ER coupled with PT2 deserves practical applications to systems of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering Overview of a Multidisciplinary HSCT Design Framework Using Medium-Fidelity Analysis Codes

An objective of the HPCC Program at NASA Langley has been to promote the use of advanced computing techniques to more rapidly solve the problem of multidisciplinary optimization of a supersonic transport configuration. As a result, a software system has been designed and is being implemented to integrate a set of existing discipline analysis codes, some of them CPU-intensive, into a distributed computational framework for the design of a High Speed Civil Transport (HSCT) configuration. The proposed paper will describe the engineering aspects of integrating these analysis codes and additional interface codes into an automated design system. The objective of the design problem is to optimize the aircraft weight for given mission conditions, range, and payload requirements, subject to aerodynamic, structural, and performance constraints. The design variables include both thicknesses of structural elements and geometric parameters that define the external aircraft shape. An optimization model has been adopted that uses the multidisciplinary analysis results and the derivatives of the solution with respect to the design variables to formulate a linearized model that provides input to the CONMIN optimization code, which outputs new values for the design variables. The analysis process begins by deriving the updated geometries and grids from the baseline geometries and grids using the new values for the design variables. This free-form deformation approach provides internal FEM (finite element method) grids that are consistent with aerodynamic surface grids. The next step involves using the derived FEM and section properties in a weights process to calculate detailed weights and the center of gravity location for specified flight conditions. The weights process computes the as-built weight, weight distribution, and weight sensitivities for given aircraft configurations at various mass cases. Currently, two mass cases are considered: cruise and gross take-off weight (GTOW). Weights information is obtained from correlations of data from three sources: 1) as-built initial structural and non-structural weights from an existing database, 2) theoretical FEM structural weights and sensitivities from Genesis, and 3) empirical as-built weight increments, non-structural weights, and weight sensitivities from FLOPS. For the aeroelastic analysis, a variable-fidelity aerodynamic analysis has been adopted. This approach uses infrequent CPU-intensive non-linear CFD to calculate a non-linear correction relative to a linear aero calculation for the same aerodynamic surface at an angle of attack that results in the same configuration lift. For efficiency, this nonlinear correction is applied after each subsequent linear aero solution during the iterations between the aerodynamic and structural analyses. Convergence is achieved when the vehicle shape being used for the aerodynamic calculations is consistent with the structural deformations caused by the aerodynamic loads. To make the structural analyses more efficient, a linearized structural deformation model has been adopted, in which a single stiffness matrix can be used to solve for the deformations under all the load conditions. Using the converged aerodynamic loads, a final set of structural analyses are performed to determine the stress distributions and the buckling conditions for constraint calculation. Performance constraints are obtained by running FLOPS using drag polars that are computed using results from non-linear corrections to the linear aero code plus several codes to provide drag increments due to skin friction, wave drag, and other miscellaneous drag contributions. The status of the integration effort will be presented in the proposed paper, and results will be provided that illustrate the degree of accuracy in the linearizations that have been employed.

Weston, R. P.↗

Arctic Tropospheric Ozone: Assessment of Current Knowledge and Model Performance

As the third most important greenhouse gas (GHG) after carbon dioxide (CO2) and methane (CH4), tropospheric ozone (O3) is also an air pollutant causing damage to human health and ecosystems. This study brings together recent research on observations and modeling of tropospheric O3 in the Arctic, a rapidly warming and sensitive environment. At different locations in the Arctic, the observed surface O3 seasonal cycles are quite different. Coastal Arctic locations, for example, have a minimum in the springtime due to O3 depletion events resulting from surface bromine chemistry. In contrast, other Arctic locations have a maximum in the spring. The 12 state-of-the-art models used in this study lack the surface halogen chemistry needed to simulate coastal Arctic surface O3 depletion in the springtime; however, the multi-model median (MMM) has accurate seasonal cycles at non-coastal Arctic locations. There is a large amount of variability among models, which has been previously reported, and we show that there continues to be no convergence among models or improved accuracy in simulating tropospheric O3 and its precursor species. The MMM underestimates Arctic surface O3 by 5 % to 15 % depending on the location. The vertical distribution of tropospheric O3 is studied from recent ozonesonde measurements and the models. The models are highly variable, simulating free-tropospheric O3 within a range of ±50 % depending on the model and the altitude. The MMM performs best, within ±8 % for most locations and seasons. However, nearly all models overestimate O3 near the tropopause (∼300 hPa or ∼8 km), likely due to ongoing issues with underestimating the altitude of the tropopause and excessive downward transport of stratospheric O3 at high latitudes. For example, the MMM is biased high by about 20 % at Eureka. Observed and simulated O3 precursors (CO, NOx, and reservoir PAN) are evaluated throughout the troposphere. Models underestimate wintertime CO everywhere, likely due to a combination of underestimating CO emissions and possibly overestimating OH. Throughout the vertical profile (compared to aircraft measurements), the MMM underestimates both CO and NOx but overestimates PAN. Perhaps as a result of competing deficiencies, the MMM O3 matches the observed O3 reasonably well. Our findings suggest that despite model updates over the last decade, model results are as highly variable as ever and have not increased in accuracy for representing Arctic tropospheric O3.

Arctic↗

Arctic tropospheric ozone: assessment of current knowledge and model performance

As the third most important greenhouse gas (GHG) after carbon dioxide (CO 2 ) and methane (CH 4 ), tropospheric ozone (O 3 ) is also an air pollutant causing damage to human health and ecosystems. This study brings together recent research on observations and modeling of tropospheric O 3 in the Arctic, a rapidly warming and sensitive environment. At different locations in the Arctic, the observed surface O 3 seasonal cycles are quite different. Coastal Arctic locations, for example, have a minimum in the springtime due to O 3 depletion events resulting from surface bromine chemistry. In contrast, other Arctic locations have a maximum in the spring. The 12 state-of-the-art models used in this study lack the surface halogen chemistry needed to simulate coastal Arctic surface O 3 depletion in the springtime; however, the multi-model median (MMM) has accurate seasonal cycles at non-coastal Arctic locations. There is a large amount of variability among models, which has been previously reported, and we show that there continues to be no convergence among models or improved accuracy in simulating tropospheric O 3 and its precursor species. The MMM underestimates Arctic surface O 3 by 5% to 15% depending on the location. The vertical distribution of tropospheric O 3 is studied from recent ozonesonde measurements and the models. The models are highly variable, simulating free-tropospheric O 3 within a range of ±50% depending on the model and the altitude. The MMM performs best, within ±8% for most locations and seasons. However, nearly all models overestimate O 3 near the tropopause (~300 hPa or ~8 km), likely due to ongoing issues with underestimating the altitude of the tropopause and excessive downward transport of stratospheric O 3 at high latitudes. For example, the MMM is biased high by about 20% at Eureka. Observed and simulated O 3 precursors (CO, NO x , and reservoir PAN) are evaluated throughout the troposphere. Models underestimate wintertime CO everywhere, likely due to a combination of underestimating CO emissions and possibly overestimating OH. Throughout the vertical profile (compared to aircraft measurements), the MMM underestimates both CO and NO x but overestimates PAN. Perhaps as a result of competing deficiencies, the MMM O 3 matches the observed O 3 reasonably well. Our findings suggest that despite model updates over the last decade, model results are as highly variable as ever and have not increased in accuracy for representing Arctic tropospheric O 3 .

54 ENVIRONMENTAL SCIENCES↗

Spirosymplokos deltaeiberi nov. gen., nov. sp.: variable-diameter composite spirochete from microbial mats

Large (up to 100 micrometers long), loosely coiled, free-living spirochetes with variable diameters (from 0.4 to 3 micrometers in the same cell) were seen at least 40 times between August 1990 and January 1993. These spirochetes were observed in mud water and enrichment media from highly specific habitats in intertidal evaporite flats at three disjunct localities, one in Spain and two in Mexico. All three are sites of commercial saltworks. Associated with Microcoleus chthonoplastes the large spirochetes from Spain display phototaxis and a composite organization. Shorter and smaller-diameter spirochetes are seen inside both healthy and spent periplasm of larger ones. Small spirochetes attached to large ones have been observed live. From two to twelve spirochete protoplasmic cylinders were seen inside a single common outer membrane. A distinctive granulated cytoplasm in which the granules are of similar diameter (20-32 nanometers) to that of the flagella (26 nanometers) was present. Granule diameters were measured in thin section and in negatively-stained whole-mount preparations. Based on their ultrastructure, large size, variable diameter, number of flagella (3 to 6), and phototactic behavior these unique spirochetes are formally named Spirosymplokos deltaeiberi. Under anoxic (or low oxygen) conditions they formed blooms in mixed culture in media selective for spirochetes. Cellobiose was the major carbon source in 80% seawater, the antibiotic rifampicin was added, mat from the original field site was present and tubes were incubated in the light at from 18-31 degrees C. Within 1-2 weeks populations of the large spirochete developed at 25 degrees C but they could not be transferred to fresh medium.

Non-NASA Center↗

KINETIC STUDY OF RADIATION-REACTION-LIMITED PARTICLE ACCELERATION DURING THE RELAXATION OF UNSTABLE FORCE-FREE EQUILIBRIA

Many powerful and variable gamma-ray sources, including pulsar wind nebulae, active galactic nuclei and gamma-ray bursts, seem capable of accelerating particles to gamma-ray emitting energies efficiently over very short timescales. These are likely due to the rapid dissipation of electromagnetic energy in a highly magnetized, relativistic plasma. In order to understand the generic features of such processes, we have investigated simple models based on the relaxation of unstable force-free magnetostatic equilibria. In this work, we make the connection between the corresponding plasma dynamics and the expected radiation signal, using 2D particle-in-cell simulations that self-consistently include synchrotron radiation reactions. We focus on the lowest order unstable force-free equilibrium in a 2D periodic box. We find that rapid variability, with modest apparent radiation efficiency as perceived by a fixed observer, can be produced during the evolution of the instability. The “flares” are accompanied by an increased polarization degree in the high energy band, with rapid variation in the polarization angle. Furthermore, the separation between the acceleration sites and the synchrotron radiation sites for the highest energy particles facilitates acceleration beyond the synchrotron radiation reaction limit. We also discuss the dynamical consequences of the radiation reaction, and some astrophysical applications of this model. Our current simulations with numerically tractable parameters are not yet able to reproduce the most dramatic gamma-ray flares, e.g., from the Crab Nebula. Higher magnetization studies are promising and will be carried out in the future.

79 ASTRONOMY AND ASTROPHYSICS↗

CMIP6 Models Underestimate the Holton‐Tan Effect

Abstract The teleconnection between the Quasi‐Biennial Oscillation (QBO) and the Arctic polar vortex is investigated using Coupled Model Intercomparison Project 6 (CMIP6) models. Output from 14 CMIP6 models is compared with reanalysis, three experiments with prescribed QBOs, one of which has no free polar stratospheric variability, and transient experiments in which a QBO is prescribed in runs previously devoid of a QBO. Each CMIP6 model underestimates the Holton‐Tan effect (HTE), the weakening of the polar vortex expected with QBO easterlies in the tropical lower stratosphere. To establish why, potential vorticity maps are used to investigate longitudinal variations in the teleconnection. Prescribing easterly QBO in the transient experiments promotes more high‐latitude planetary wave breaking by influencing the mid‐latitude stratospheric circulation, particularly over Asia. CMIP6 models that better simulate this response over Asia better simulate the HTE. These models also have stronger 10 hPa QBO westerlies.

54 ENVIRONMENTAL SCIENCES↗

Reduced hierarchical equations of motion in real and imaginary time: Correlated initial states and thermodynamic quantities

For a system strongly coupled to a heat bath, the quantum coherence of the system and the heat bath plays an important role in the system dynamics. This is particularly true in the case of non-Markovian noise. We rigorously investigate the influence of system-bath coherence by deriving the reduced hierarchal equations of motion (HEOM), not only in real time, but also in imaginary time, which represents an inverse temperature. It is shown that the HEOM in real time obtained when we include the system-bath coherence of the initial thermal equilibrium state possess the same form as those obtained from a factorized initial state. We find that the difference in behavior of systems treated in these two manners results from the difference in initial conditions of the HEOM elements, which are defined in path integral form. We also derive HEOM along the imaginary time path to obtain the thermal equilibrium state of a system strongly coupled to a non-Markovian bath. Then, we show that the steady state hierarchy elements calculated from the real-time HEOM can be expressed in terms of the hierarchy elements calculated from the imaginary-time HEOM. Moreover, we find that the imaginary-time HEOM allow us to evaluate a number of thermodynamic variables, including the free energy, entropy, internal energy, heat capacity, and susceptibility. The expectation values of the system energy and system-bath interaction energy in the thermal equilibrium state are also evaluated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗