Search NASA⌕ Search

SEARCH · Search NASA

Results for “water splitting technologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Catalyzing the Mass Adoption of High Efficiency Technologies in the Multifamily Housing Market

ICAST’s objective was to catalyze the adoption of very-high-efficiency (VHE) heat pump HVAC (mini-splits) and water heaters (HPWH) in multifamily (MF), especially affordable housing (MFAH). Nationally, the market penetration of ENERGY STAR-certified ASHPs is estimated at 43%, and for HPWHs it’s 3% (ENERGY STAR, 2022). Note that mini-splits are a much more practical choice for MF units than ducted systems and their adoption is only a portion of the number provided above, but isolating the market penetration data for mini-split systems is difficult. Both the heat pump-based HVAC and water heater systems can be approx. three times more efficient than their conventional counterparts for space and water heating. While awareness and adoption of VHE heat pumps has been growing nationally, and electric heat pump systems have outsold gas furnaces for two years in a row, the MF segment continues to lag behind single-family. MF constitutes almost a third of the housing in the U.S., so scaling up VHE adoption in this segment can assist in achieving critical climate change goals, while preserving housing affordability for the low-to-moderate income (LMI) population (historically, 85% of residents of MF are LMI).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Engineered Colloidal Hetero-nanocrystals for Photocatalytic Hydrogen Production

This research is focused on the development of novel semiconductor hetero-structured nanocrystals which can convert solar energy into hydrogen using photocatalytic water splitting reactions. The newly developed nanomaterials could produce cost-effective chemical fuel by employing less-energy intensive technology.

08 HYDROGEN↗
DOE OSTI2026

Hydrogen R&D at NREL

This presentation provides an overview of the hydrogen R&D activities at NREL, including make, store, move, and use hydrogen. At NREL, our research spans the advanced water splitting materials (AWSM) and hydrogen storage R&D, performed within the HydroGEN and HyMARC Energy Materials Networks (EMN), respectively, to the materials integration and scale up work done within the H2NEW consortium, to fuel cell R&D within the M2FCT consortium, to stack and systems testing at the MW-level. These R&D activities are funded by U.S. Department of Energy Hydrogen and Fuel Cell Technologies Office.

08 HYDROGEN↗
DOE OSTI2023

Mixed Ionic Electronic Conducting Quaternary Perovskites: Materials by Design for Solar Thermochemical Hydrogen

The innovative research conducted by Arizona State University and Princeton University in the project "Mixed Ionic-Electronic Conducting Quaternary Perovskites: Materials by Design for Solar Thermochemical Hydrogen" marks a significant stride forward in thermochemical water splitting. Through an intricate blend of computational design and experimental validation, the project delved into the promising potential of Mixed Ionic Electronic Conducting (MIEC) perovskites. These complex materials, characterized by their unique redox-active nature and adaptability in stoichiometry, present a promising frontier for efficient solar thermochemical hydrogen production. Firstly, the research enhanced the science by utilizing state-of-the-art computational methodologies to unravel the nuanced chemical potentials of MIEC perovskites. By simulating various off-stoichiometric scenarios and redox conditions, the team was able to predict material behaviors under diverse environmental conditions, a feat unachievable through conventional experimental methodologies alone. This approach not only fast-tracks the material screening process, significantly reducing the time from laboratory re-search to practical application, but also uncovers trends and correlations that are pivotal for future materials innovation. Regarding technical effectiveness, the project stands out in its economic feasibility. Traditional methods of materials discovery are often marred by high costs and extensive timeframes, owing to the iterative nature of experimental processes. However, by employing theoretical computations and validating these findings with targeted experiments, the project introduced a cost-effective paradigm for materials discovery and the first ever prediction, synthesis, and preliminary validation of a material solely from computational and theoretical considerations. This synergy between computation and experimentation expedites the discovery of optimal materials conducive to high-efficiency solar-to-hydrogen conversion processes. Furthermore, the public stands to benefit substantially from this research. The success of MIEC perovskites in solar thermochemical applications heralds a shift towards lower cost and lower electricity input for clean hydrogen production, hence potentially impacting climate and energy resilience. By improving the efficiency of solar-to-hydrogen conversions, the research paves the way for reduced dependency on fossil fuels, addressing the urgent global need for accessible and renewable energy sources. Moreover, the project's advancements contribute to scientific literacy in renewable energy technologies, empowering society through knowledge and spurring future innovations. In essence, this research project demonstrates significant progress in the realm of advanced water splitting through solar thermochemistry. Through its groundbreaking approaches in computational materials science and its implications for real-world applications, it holds the promise of a cleaner, more energy-resilient future.

08 HYDROGEN↗
DOE OSTI2025

Fe‐Triazolate Metal–Organic Frameworks as Water Oxidation Catalysts with Dual Photoanode Functionality

Artificial photosynthesis is an emerging technology that achieves renewable fuels, such as hydrogen, from sunlight. Its realization depends on finding highly active and stable catalysts of water splitting and photoactive materials for light absorption. To be scalable, these should contain only abundant elements. Here, for the first time, Fe-triazolate (Fe(ta) 2 ) and its metal substituted derivatives (Fe-Metal(ta) 2 ) Metal-organic frameworks (MOFs) are characterized as new dual-function materials for photo-absorption and water oxidation catalysis in acidic media. The materials were studied by a range of structural, spectroscopic, and computational density functional theory (DFT) techniques. Fe(ta) 2 and Fe-Mn(ta) 2 were found to be highly active and stable in chemical and photochemical water oxidation, and in addition function as photoanodes, with photo-electrocatalytic currents (∼2.00 x 10 −3 Acm −2 at + 1.4 V vs. Ag/AgCl) at pH = 1. The possibility of a unique catalytic mechanism where O─O bond formation is possible from the coupling of two adjacent Fe IV = O fragments was demonstrated by DFT analysis. Thus, Fe-triazolate MOF has been established as a new, stable, scalable, versatile, and efficient platform for sustainable energy conversion in the realm of artificial photosynthesis.

Artificial photosynthesis↗
DOE OSTI2024

Integration of Concentrating Solar Power with High Temperature Electrolysis for Hydrogen Production: Preprint

Hydrogen (H2) has been identified as a leading sustainable contender to replace fossil fuels in transportation and electricity generation. H2 production can be achieved by concentrating solar thermal power (CSP) systems collecting thermal energy from the sun to various chemical processes for fuel production. Fuel production via solar thermal chemical processes integrated with CSP uses the full spectrum of sunlight compared with photovoltaic power conversion and stores solar energy directly and efficiently [1]. The solar fuel production can be realized by thermochemical processes (e.g., water splitting for H2 production, carbon dioxide reduction, or methane reforming) or thermal electrochemical methods (e.g., integration with solid oxide electrolysis cell). Technology development for CSP-integrated solar fuel production requires broad technological bases from solar energy collection to chemical energy conversion. H2 generated from renewable sources can be an energy carrier for a carbon-free economy. Integrating CSP with high temperature electrolysis (HTE) using solid oxide electrolysis cells (SOEC) provides a renewable path for H2 generation. The CSP-HTE integration approach provides the benefit of thermal energy storage (TES) for continuous operation, improved capacity, and SOEC life. H2 gas has low energy density for transportation, pipeline networks are expensive, and H2 liquefaction is energy intensive. However, an alternative method for H2 distribution is to use carbon dioxide (CO2) capture and liquid hydrocarbon synthesis to convert solar energy into liquid fuels that are compatible with the existing fossil fuel infrastructure.

concentrating solar thermal power↗
DOE OSTI2026

Front-Surface Potential of Platinized p -InP Photocathodes Probed by Dual-Working-Electrode Measurements

The front-surface potential (E fr ) of p-InP/Pt photocathodes performing the hydrogen-evolution reaction has been probed under operating conditions using a dual-workingelectrode (DWE) method. The DWE data are consistent with expectations for proposed stability mechanisms for p-InP photocathodes. Specifically, E fr for Pt-modified p-InP adopts a value near the reversible hydrogen electrode (RHE) potential, consistent with kinetic suppression of metallic In 0 formation. The data provide a rapid, operando metric of interfacial catalyst activity, and indicate that E fr for the p-InP/Pt junction is governed by surface catalytic kinetics rather than by the applied back-contact potential (E b ).

Catalysts↗
DOE OSTI2023

Photocatalytic water splitting

With the goal of achieving large-scale H 2 production from renewable resources, water splitting into H 2 and O 2 using semiconductor photocatalysts (sometimes called artificial photosynthesis) has been studied for five decades. Unfortunately, the lack of rigour and reproducibility in the data collection and analysis of experimental results has hindered progress in the field. This Primer provides a comprehensive overview of proper characterization and evaluation of photocatalysts for overall water splitting. In particular, the Primer covers various pitfalls in photocatalysis research, best practices for reproducibility and reliable methods for conducting rigorous experiments. As a result, the recommendations are intended to reduce false positives in the literature and to promote progress towards a practical technology for producing H 2 from water by using sunlight.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Active Reservoir Management Engineering and Evaluation Summary – Brine Extraction and Storage Test Phase II Final Report – Volumes 1-3

The Energy & Environmental Research Center (EERC) conducted a multiyear program over two phases to perform a field study of the potential efficacy of formation water extraction during carbon dioxide (CO 2 ) injection for CO 2 storage as a means of improving efficiency and/or effectiveness. Phase I was a 2-year study on potential methodologies for a field study of pressure management, culminating in site selection and experimental and site design. Phase II was a 7-year effort that involved constructing site facilities, conducting experiments, and evaluating collected field data. The experimental portion was split into two collaborative components, one for the active reservoir management (ARM) experiment and a second component to host and demonstrate potential water treatment technologies appropriate for high-saline brine at the project site. The results of the overall project are expected to benefit future saline storage projects through validation of techniques that may reduce stress on sealing formations, increase storage capacity, and reduce area of review. The following report focuses on the Phase II ARM experimental implementation and results. A second companion report summarizes the results of the high-saline brine demonstrations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Reports from the Frontier: Understanding Voltage Losses in Anion Exchange Membrane Water Electrolyzers

With the growth of renewable energy sources, hydrogen is attracting significant attention worldwide as an effective medium for energy storage. “Green hydrogen” is currently produced primarily by water electrolysis in which water is split into hydrogen and oxygen using power from low-carbon energy sources such as wind, solar, and nuclear. Among the low temperature water electrolysis technologies, anion exchange membrane water electrolyzers (AEMWEs) have recently emerged as a promising competitor to traditional alkaline water electrolyzers (AWEs) and proton exchange membrane electrolyzers (PEMELs) due to their potential stack cost reduction in various cell components. In conclusion, favorable aspects of AEMWEs include the use of PGM-free electrocatalysts as well as low-cost membranes, bipolar plates (BPs), and porous transport layers while offering high voltage efficiency and durability.

08 HYDROGEN↗
DOE OSTI2025

Levelized cost and carbon intensity of solar hydrogen production via water splitting using a scalable and intrinsically safe photocatalytic Z-scheme raceway system

Generating hydrogen from local energy resources such as solar or wind would unlock a low-carbon energy carrier that could be used to reduce greenhouse gas emissions in sectors such as industry and transportation. Yet, the allocation of new or existing power generation solely to hydrogen production remains contentious due to disputes regarding emissions accounting. Photocatalytic (PC) hydrogen production technologies offer a unique solution, as hydrogen is produced directly from solar energy and water, without the need for electricity generation. However, cost projections for all photocatalytic designs to date have suggested that they are not cost competitive compared to conventional electrolysis systems manufactured at scale. Herein, we offer the first illustrative benchmark of cost and carbon intensity of hydrogen produced in a type 2 “Z-scheme” photocatalytic reactor design, which employs suspended semiconducting nanoconductor particles organized into two stacked volumes in a raceway design. The “Z-scheme” system utilizes two separate photoabsorber particles, tuned to drive either the hydrogen evolution reaction or the oxygen evolution reaction individually, connected via a reversible, charge transfer redox couple in solution. Furthermore, the results suggest a highly competitive and scalable technology, that justifies further experimental validation and prototyping in the field.

Carbon↗
DOE OSTI2021

Current research in low temperature proton exchange membrane-based electrolysis and a necessary shift in focus

While hydrogen has limited use in energy markets today, significant growth is possible in grid storage and as an energy carrier in other sectors. Along with lower electricity prices, further hydrogen cost reduction can enable electrochemical water splitting, particularly as the use of intermittent, renewable power sources increases and the quantity and duration of storage requirements limit electrical storage options. With the improved viability of large-scale hydrogen production, research in low temperature electrolysis has dramatically increased. The overwhelming majority of research efforts within proton exchange membrane-based systems has focused on catalyst development, although a smaller set have developed transport layers as well. As proton exchange membrane-based electrolysis shifts into higher technology readiness levels, however, there is a growing need for work optimizing materials integration, developing component-specific and device-level accelerated stress tests, and addressing manufacturing considerations. These areas directly impact electrolyzer performance, durability, and cost, and are critical to advancing hydrogen’s value and electrochemical water splitting.

08 HYDROGEN↗
DOE OSTI2025

Probing Photoelectrochemical Hydrogen and Oxygen Evolution at Individual Al:SrTiO 3 /Rh 2–y Cr y O 3 Photocatalyst Particles

Particle-based photocatalysts for overall water splitting convert solar energy into hydrogen fuel without the use of any photovoltaic devices. As such they have the potential to revolutionize renewable energy production on Earth. While proven efficiencies have reached 1.1%, further improvements of photocatalyst technology depend on a better understanding of energy loss mechanisms on the individual particle level. Here, we conduct the first in operando photoelectrochemical measurements on individual micrometer-sized Al-doped SrTiO 3 /Rh 2–y CryO 3 photocatalyst particles. We find that the photocatalyst particles behave mainly as water oxidation photoanodes reaching up to 0.5 mA cm −2 at 0.8 V versus RHE and a photovoltage of ∼1.00 V under 4.7 mW cm −2 ultraviolet illumination. This proves that charge separation in the unbiased Al:SrTiO 3 /Rh 2–y Cr y O 3 catalyst is driven by a junction at the n-semiconductor-liquid contact. While O 2 is detected symmetrically around photocatalyst particles, uneven H 2 evolution profiles reflect an irregular Rh 2–y Cr y O 3 cocatalyst distribution. Additionally, the H 2 evolution activity varies significantly between different photocatalyst particles. Furthermore, this suggests that performance gains are possible by better controlling catalyst composition on the microscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Visualizing Overall Water Splitting on Single Microcrystals of Phosphorus-Doped BiVO 4 by Photo-SECM

Particulate bismuth vanadate (BiVO4) has attracted considerable interest as a promising photo(electro)catalyst for visible-light-driven water oxidation, however, overall water splitting (OWS) has been difficult to attain because its conduction band is too positive for efficient hydrogen evolution. Using photo-scanning electrochemical microscopy (photo-SECM) with a chemically modified nanotip, we visualized for the first time the OWS at a single truncated bipyramidal microcrystal of phosphorus-doped BiVO 4 . The tip simultaneously served as a light guide to illuminate the photocatalyst and as an electrochemical nanoprobe to observe and quantitatively measure local oxygen and hydrogen fluxes. The obtained current patterns for both O 2 and H 2 agree well with the accumulation of photogenerated holes and electrons on {010} basal and {110} lateral facets, respectively. Furthermore, the developed experimental approach is an important step towards nanoelectrochemical mapping of the activity of photocatalyst particles at the sub-facet level.

bismuth vanadate↗
DOE OSTI2025

Tailoring MoS 2 for Small-Molecule Electroreduction: The Role of Metal Doping and Heterostructures

The electrification of chemical transformations central to sustainable fuel production and waste valorization, such as overall water splitting (OWS), hydrogen evolution reaction (HER), and electrochemical reduction of CO 2 (CO 2 R), presents a powerful opportunity to advance carbon-neutral energy technologies. Transition metal dichalcogenides (TMDs), particularly MoS 2 , have emerged as promising electrocatalyst candidates, owing to their abundance, tunable active sites, and defect-rich structures. This review highlights recent progress in leveraging metal doping and heterostructure engineering of MoS 2 to enhance the electrocatalytic activity and selectivity. By compiling insights from experimental studies and density functional theory (DFT) predictions, we examine how defect creation, electronic structure modification, and interface design contribute to improved charge transport and catalytic efficiency. Particular emphasis is placed on rational design principles, synthetic strategies, and operando characterization methods that provide a pathway to understanding and optimizing MoS 2 -based materials. We also discuss the challenges of stability, mechanistic ambiguity, and scaling while outlining opportunities to bridge theory and experiment. Collectively, this review underscores how defect and heterostructure engineering of MoS 2 can accelerate the development of efficient, sustainable electrocatalysts for both fuel generation and waste-to-value generation.

CO2 reduction↗
DOE OSTI2020

Assessment of Potential Future Demands for Hydrogen in the United States

H2@Scale is a U.S. Department of Energy (DOE) initiative that brings together stakeholders to advance the affordable production, transport, storage, and utilization of hydrogen (H2) as an energy carrier to increase revenue opportunities in multiple energy sectors. The focus of the current work is to characterize the growth potential of diverse hydrogen industries in the United States, given research and development (R&D) advancements in hydrogen technologies. Current and emerging hydrogen production technologies utilize diverse energy sources, including natural gas (NG) reforming, as well as renewable and nuclear power for low-temperature and high-temperature water splitting. The produced hydrogen also enables emerging domestic industries that value conventional and renewable hydrogen as an energy carrier for intermediate and end use. The success of H2@Scale (Figure ES.1) depends not only on hydrogen demand from growing existing markets such as petroleum refining and ammonia (NH 3 ) production, but also on the development of new markets such as metals refining, synthetic fuel (synfuel) and chemical production, biofuels, light-duty (LD) and heavy-duty (HD) hydrogen fuel cell (FC) electric vehicles (FCEVs), and injection into NG pipelines, all of which can significantly increase hydrogen demand relative to current levels of approximately10 million metric tons [MMT] annually. This study focused primarily on five demand sectors — synfuels, upgrading of oil/biomass, NH 3 /fertilizer, metals refining, and hydrogen vehicles (transportation) — along with gas infrastructure. For each sector, a hydrogen demand potential was quantified, along with a “threshold price.” The hydrogen demand potential reflects a practical amount of hydrogen that could be used in that sector, barring economic considerations. The threshold price reflects the price at which the consumer would utilize hydrogen in lieu of an alternative that could supply the same performance.

08 HYDROGEN↗