Search NASA⌕ Search

SEARCH · Search NASA

Results for “Liquid interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

The development of two new KC-135 furnaces for studies on microgravity materials processing

Wyle Laboratories is currently designing and fabricating two KC-135 materials processing furnaces for Marshall Space Flight Center. The first of these, called the Rapid Melt/Rapid Quench (RM/RQ) Furnace, will be used to melt and resolidify Cu-, Al-, and Ni-based alloys and composites, all during the 20 to 30 seconds of low gravity (0.1 to 0.001 g) available in a single parabola of the KC-135. In addition, it will be capable of directional solidification of these alloys. The furnace can be configured for either liquid or gas quenching of the samples. The second furnace, called the Polymer Solidification Transparent (PST) Furnace, will use a wide range of sample translation rates to directionally solidify polymers and low-melting-point metals as the KC-135 flies a series of parabolic maneuvers. The use of transparent crucibles and an optics system between the hot and cold zones of the furnace will allow for high-resolution video monitoring of the solid-liquid interface during processing. It is hoped that the development of these two furnaces will lead to significant increases in understanding of interface kinetics, fluid flow, and heat transfer in materials during solidification in a low-gravity environment.

Fiske, Michael↗

Computer modeling of convection in the liquid metal during solidification

Numerical methods are used to study thermally/gravitationally induced convection during solidification. The primary object is aimed at understanding the flow field in the liquid metal pool due to convection. An Al-0.5Fe weight percent alloy is assumed to fill a small scale vertical rectangular enclosure model for this study. The Alternating Direction Implicit method and Successive Overrelaxation method are employed to solve these equations, which include the energy balance equation coupled with the mass and momentum equations. Both transient and steady state conditions under 1 g and low gravity (0.001 g) are investigated. The solutions for the two-dimensional isotherms and streamlines under 1 g conditions are graphically presented. The quantitative results show that the convection which occurs in the liquid metal pool is very small and is likely to have a negligible effect on the solute redistribution ahead of the solid-liquid interface.

Lott, R. L., Jr.↗

A fixed grid numerical methodology for phase change problems involving a moving heat source

A numerical method for solving phase change problems involving a moving heat source is presented and illustrated by a two-dimensional example. The method uses a fixed grid and does not require the implementation of the Stefan condition at the solid-liquid interface; the procedure can thus be easily implemented using existing fixed grid codes. The problem considered as an example involves natural convection flow in the molten metal during tungsten inert gas welding.

Prakash, C.↗

Characterization of directionally solidified lead chloride

A directionally solidified PbCl2 material was prepared and analyzed and subsequently used to grow single crystals. It was found that silicon, halogens, sulfur, magnesium, and phosphorus were the hardest impurities to remove by the single-pass directional freezing. Single crystals grown from the purified material displayed good scattering beam quality and showed no absorption peaks between 0.30 to 20 microns. Direct photographic observations of the solid-liquid interface at several G/V (denoting the temperature gradient and the translation velocity, respectively) ratio values showed that, as the G/V ratio decreased, the interface varied from a smooth convex surface to dendritic.

Singh, Narsingh Bahadur↗

Probes and monitors for the study of solidification of molten semiconductors

The purpose is to examine solidification in the LiCl-KCl system to determine if phenomena such as solute rejection can be obseved by laser schlieren imaging. Molten salts have attributes that make them attractive as physical models in solidification studies. With optical techniques of investigation such as schlieren imaging, it is possible to study fluid flow phenomena in molten salts and to watch the trajectory of the solid-liquid interface.

Sadoway, D. R.↗

Heat of mixing and morphological stability

A mathematical model, which incorporates heat of mixing in the energy balance, has been developed to analyze the morphological stability of a planar solid-liquid interface during the directional solidification of a binary alloy. It is observed that the stability behavior is almost that predicted by the analysis of Mullins and Sekerka (1963) at low growth velocities, while deviations in the critical concentration of about 20-25 percent are observed under rapid solidification conditions for certain systems. The calculations indicate that a positive heat of mixing makes the planar interface more unstable, whereas a negative heat of mixing makes it more stable, in terms of the critical concentration.

Nandapurkar, P.↗

Morphological transitions in the rapid solidification regime - A re-examination of the fundamental validity of the absolute stability concept of Mullins and Sekerka

The validity of the notion of absolute stability (AS) of a planar solid-liquid interface, proposed by Mullins and Sekerka (M-S, 1964), was tested using experimental data obtained for a number of dilute Ag-Cu and Sn-In alloys and for ultrahigh-purity succinonitrile. It is shown that the restriction applied by the M-S theory is satisfied during the steady-state planar solidification in an undercooled melt, provided the undercooling is quite small. The findings obtained on the Ag-Cu and Sn-In alloys are compared with early measurements by Davis and Fryzuk (1971) in dilute Sn-In alloys with 25 to 400 ppm additions of In.

Laxmanan, V.↗

Directional solidification of HgCdTe and HgZnTe in a transverse magnetic field

Hg(0.80)Cd(0.20)Te crystals were grown vertically in a transverse magnetic field by directional solidification. The effect of a magnetic field on the nature of fluid flow in the melts was investigated by measuring compositional variations along the axial and radial directions of the grown ingots. Magnetic field effects were shown to be significant over the entire field range employed (i.e., 2 to 5 kG). The axial compositional profiles (determined by precision density measurements) showed an abrupt decrease in the mole fraction of CdTe when the field was applied. Radial compositional mapping by IR transmission and X-ray energy dispersion spectrometry indicated that the solid-liquid interface evolved through three stages when the field was applied (i.e., from a radially symmetric concave interface to an off-center concave shape when the field was initially applied, then to a tilted plane, and, finally, to an off-center concave interface). The axial compositional profile of an Hg(0.84)Zn(0.16)Te ingot showed similar field effects.

Su, Ching-Hua↗

A Local Condensation Analysis Representing Two-phase Annular Flow in Condenser/radiator Capillary Tubes

NASA's effort for the thermal environmental control of the Space Station Freedom is directed towards the design, analysis, and development of an Active Thermal Control System (ATCS). A two phase, flow through condenser/radiator concept was baselined, as a part of the ATCS, for the radiation of space station thermal load into space. The proposed condenser rejects heat through direct condensation of ATCS working fluid (ammonia) in the small diameter radiator tubes. Analysis of the condensation process and design of condenser tubes are based on the available two phase flow models for the prediction of flow regimes, heat transfer, and pressure drops. The prediction formulas use the existing empirical relationships of friction factor at gas-liquid interface. An attempt is made to study the stability of interfacial waves in two phase annular flow. The formulation is presented of a stability problem in cylindrical coordinates. The contribution of fluid viscosity, surface tension, and transverse radius of curvature to the interfacial surface is included. A solution is obtained for Kelvin-Helmholtz instability problem which can be used to determine the critical and most dangerous wavelengths for interfacial waves.

Karimi, Amir↗

Direct numerical simulation of a combusting droplet with convection

The evaporation and combustion of a single droplet under forced and natural convection was studied numerically from first principles using a numerical scheme that solves the time-dependent multiphase and multispecies Navier-Stokes equations and tracks the sharp gas-liquid interface cutting across an arbitrary Eulerian grid. The flow fields both inside and outside of the droplet are resolved in a unified fashion. Additional governing equations model the interphase mass, energy, and momentum exchange. Test cases involving iso-octane, n-hexane, and n-propanol droplets show reasonable comparison rate, and flame stand-off distance. The partially validated code is, thus, readied to be applied to more demanding droplet combustion situations where substantial drop deformation render classical models inadequate.

Liang, Pak-Yan↗

Sintering time and atmosphere influences on the microstructure and mechanical properties of tungsten heavy alloys

The present paper traces the microstructure and mechanical property variations vs sintering time under conditions where the atmosphere was adjusted to suppress pore generation. Attention is given to tracing the mechanical property links to the grain size under optimized sintering conditions. The optimal cycle is used to sinter two heavy alloy compositions (88 and 95 wt pct W) for times up to 600 minutes at 1480 C. The 88-pct-W samples slumped, but the 95-pct-W samples were fully densified and suitable for tensile testing. At long sintering times, the tungsten grains flattened and the tungsten contiguity decreased, indicating a transition to low-energy configurations for the solid-liquid interfaces. The cube of the mean grain size varied linearly with the isothermal sintering time. This allowed the determination of grain size effects on mechanical properties, showing a decreasing yield strength with increasing time in agreement with the Hall-Petch behavior. The tensile strength and elongation were highest for sintering times from 30 to 90 min, reflecting a minimum in the residual porosity.

German, R. M.↗

Growth from a hypercooled melt near absolute stability

The stability of a solid-liquid interface in a hypercooled melt is studied, taking into account attachment kinetics, surface energy, and surface energy in the heat balance. There is a basic-state solution with the planar interface moving at constant speed. Linear-stability theory gives a long-wave absolute-stability limit. Near this point a string model is introduced in which a thermal-boundary-layer approximation is used and an evolution equation for the interface is obtained. In a limiting case this interface equation reduces to a Kuromoto-Sivashinsky equation. Comparison with experimental and numerical results are discussed, and a conceptual picture of unconstrained growth for all undercoolings is addressed.

Umantsev, A.↗

Identification and control of a multizone crystal growth furnace

This paper presents an intelligent adaptive control system for the control of a solid-liquid interface of a crystal while it is growing via directional solidification inside a multizone transparent furnace. The task of the process controller is to establish a user-specified axial temperature profile and to maintain a desirable interface shape. Both single-input-single-output and multi-input-multi-output adaptive pole placement algorithms have been used to control the temperature. Also described is an intelligent measurement system to assess the shape of the crystal while it is growing. A color video imaging system observes the crystal in real time and determines the position and the shape of the interface. This information is used to evaluate the crystal growth rate, and to analyze the effects of translational velocity and temperature profiles on the shape of the interface. Creation of this knowledge base is the first step to incorporate image processing into furnace control.

Batur, C.↗

NLS propulsion - Government view

The paper discusses the technology development for the Space Transportation Main Engine (STME). The STME is a liquid oxygen/liquid hydrogen engine with 650,000 pounds of thrust, which may be flown in single-engine or multiple-engine configurations, depending upon the payload and mission requirements. The technological developments completed so far include a vacuum plasma spray process, the liquid interface diffusion bonding, and a thin membrane platelet technology for the combustion chamber fabrication; baseline designs for the hydrogen turbopump and the oxygen pump; and the engine control system. The family of spacecraft for which this engine is being developed includes a 20,000 pound payload to LEO and a 150,000 pound to LEO vehicle.

Smelser, Jerry W.↗

Shrinkage void formation and its effect on freeze and thaw processes of lithium and lithium-fluoride for space applications

The effects of shrinkage void forming during freezing of lithium and lithium fluoride on subsequent thaw processes are investigated using a numerical scheme that is based on a single (solid/liquid) cell approach. Results show that a void forming at the wall appreciably reduces the solid-liquid interface velocity, during both freeze and thaw, and causes a substantial rise in the wall temperature during thaw. However, in the case of Li, the maximum wall temperature was much lower than the melting temperature of PWC-11, which is used as the structure material in the SP-100 system. Hence, it is concluded that a formation of hot spots is unlikely during the startup or restart of the SP-100 system.

Yang, Jae Y.↗

Titanium honeycomb panel testing

The paper describes the procedures of thermal mechanical tests carried out at the NASA Dryden Flight Research Facility on two tianium honeycomb wing panels bonded using liquid interface diffusion (LID) technique, and presents the results of these tests. The 58.4 cm square panels consisted of two 0.152-cm-thick Ti 6-2-4-2 face sheets LID-bonded to a 1.9-cm-thick honeycomb core, with bearing plates fastened to the perimeter of the upper and the lower panel surfaces. The panels were instrumented with sensors for measuring surface temperature, strain, and deflections to 315 C and 482 C. Thermal stress levels representative of those encountered during aerodynamic heating were produced by heating the upper panel surface and restraining all four edges. After more than 100 thermal cycles from room temperature to 315 C and 50 cycles from room temperature to 482 C, no significant structural degradation was detected in the panels.

Richards, W. L.↗

Mechanisms of voids formation during cooldown and freezing of lithium in SP-100 type systems

The mechanisms of void formation during the cooldown and freezing of lithium coolant within the primary loop of SP-100 type systems are investigated. These mechanisms are: (a) homogeneous nucleation, (b) heterogeneous nucleation, (c) normal segregation of helium gas dissolved in liquid lithium, and (d) shrinkage of lithium during freezing. To evaluate the void formation potential due to segregation, a numerical scheme that couples the freezing and mass diffusion processes in both the solid and liquid regions is developed. The results indicated that the formation of He bubbles is unlikely by either homogeneous or heterogeneous nucleation during the cooldown process. However, homogeneous nucleation of He bubbles following the segregation of dissolved He in liquid Lithium ahead of the solid-liquid interface is likely to occur. Results also show that total volume of He void is insignificant when compared to that of shrinkage voids.

Yang, Jae Y.↗

Design of an automated imaging system for use in a space experiment

An experiment, occurring in an orbiting platform, examines the mass transfer across gas-liquid and liquid-liquid interfaces. It employs an imaging system with real time image analysis. The design includes optical design, imager selection and integration, positioner control, image recording, software development for processing and interfaces to telemetry. It addresses the constraints of weight, volume, and electric power associated with placing the experiment in the Space Shuttle cargo bay. Challenging elements of the design are: imaging and recording of a 200-micron-diameter bubble with a resolution of 2 microns to serve a primary source of data; varying frame rates from 500 per second to 1 frame per second, depending on the experiment phase; and providing three-dimensional information to determine the shape of the bubble.

Hartz, William G.↗