Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scanning electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Influence of surface pattern on the biological properties of Ti grade 2

Highlights: • Laser modification causes changes in chemical composition of the surface. • Laser treatment creates roughness in a range from nano- to micrometers. • The surface modification presented results in a multimodal topography. • A hierarchical topography promotes protein adsorption. - Abstract: This paper presents a detailed characterization of Ti surface geometries as produced by non-contact laser functionalization and its impact on the process of protein adsorption. The proposed surface modification is designed for the local treatment of implantable devices with original roughness. In this work, titanium plates were initially modified by the two most common mechano-chemical treatments, shot peening and acid etching. The material under study was next functionalized DLIL (Direct Laser Interference Lithography) in order to obtained two different surface patterns: grooves and islands. The modified surfaces were characterized in terms of their shape, roughness, wettability, surface energy and chemical composition. For this purpose, the following methods were used: scanning electron microscopy, optical profilometry, atomic force microscopy, contact angle measurements, and X-ray photoelectron spectroscopy. Protein adsorption tests were conducted to consider the potential of the proposed methodology in biomedical applications and to compare the influence of the two different surface patterns on the initial state of ossointegration. To this end, XPS and FTIR studies were conducted. The systematic analysis presented will be useful when selecting an appropriate surface geometry for the local surface functionalization of implantable devices.

36 MATERIALS SCIENCE↗

Effect of aluminum substitution on structural and electromagnetic properties of nanocrystalline MgCuMn ferrites

The effect of substitution of nonmagnetic Al{sup 3+} ions on the structural and electromagnetic properties were studied in nanocrystalline ferrite series of Mg{sub 0.8}Cu{sub 0.2}Al{sub x}Fe{sub 1.95-x}Mn{sub 0.05}O{sub 4} where x varies 0-0.4 in steps of 0.1. This series was synthesized by using microwave hydrothermal method. The nanocrystalline ferrite phase was observed at temperature 150°C/40 min. Synthesized powders were characterized using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The synthesized powders were densified using microwave sintering method at 950°C/40 min. The sintered samples were characterized using XRD. Surface morphology was observed by using field effective scanning electron microscopy (FESEM). The electrical and magnetic properties were measured at room temperature. These results led us to interfere that the values of d.c resistivity increases and dielectric constant, initial permeability, saturation magnetization and Curie temperature were observed to be decreased with the substitution of Al{sup 3+} ions with those of Fe{sup 3+}. The low dielectric and magnetic losses and low magnetization exhibited by aluminum substituted MgCuMn ferrites makes them find applications in microwave devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing the thermal decomposition of plutonium (III) oxalate with IR and Raman spectroscopy, X-ray diffraction, and electron microscopy

The thermal decomposition of Pu(III) oxalate was analyzed by Raman microspectroscopy, infrared spectroscopy, scanning electron microscopy, and powder X-ray diffraction. These data show that crystalline Pu 2 (C 2 O 4 ) 3 •9H 2 O progressively loses water and oxalate ligands as it is heated, which leads to a decrease in long-range lattice ordering, though minimal changes are observed in gross crystalline morphology. The onset of PuO 2 formation was observed between 200 - 250 °C. Thermal decomposition of oxalate ligands leads to the formation of CO 2 and plutonium oxalate-carbonate moieties, which had not been observed in previously published thermogravimetric measurements of Pu(III) oxalate. Formation of plutonium oxalate-carbonate moieties is believed to be associated with a change in the plutonium oxidation state from 3+ to 4+, which occurs prior to PuO 2 formation. The data provided herein demonstrate the rich spectroscopic nature of a rather underexplored, and technologically relevant, plutonium system. Ideally these results will further future investigations into the Pu(III) oxalate system both experimentally and computationally.

36 MATERIALS SCIENCE↗

Structural tuning of nanogaps using electromigration induced by field emission current with bipolar biasing

We report a new method for fabrication of Ni nanogaps based on electromigration induced by a field emission current. This method is called “activation” and is demonstrated here using a current source with alternately reversing polarities. The activation procedure with alternating current bias, in which the current source polarity alternates between positive and negative bias conditions, is performed with planar Ni nanogaps defined on SiO{sub 2}/Si substrates at room temperature. During negative biasing, a Fowler-Nordheim field emission current flows from the source (cathode) to the drain (anode) electrode. The Ni atoms at the tip of the drain electrode are thus activated and then migrate across the gap from the drain to the source electrode. In contrast, in the positive bias case, the field emission current moves the activated atoms from the source to the drain electrode. These two procedures are repeated until the tunnel resistance of the nanogaps is successively reduced from 100 TΩ to 48 kΩ. Scanning electron microscopy and atomic force microscopy studies showed that the gap separation narrowed from approximately 95 nm to less than 10 nm because of the Ni atoms that accumulated at the tips of both the source and drain electrodes. These results show that the alternately biased activation process, which is a newly proposed atom transfer technique, can successfully control the tunnel resistance of the Ni nanogaps and is a suitable method for formation of ultrasmall nanogap structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novel nanocomposites based on polythiophene and zirconium dioxide

Highlights: • Crystallinity of polythiophene decreased with doping process. • Zirconium dioxide changed the surface morphology of PT significantly. • Doping process increased the glass transition temperature of polythiophene. • Charge transport mechanism of all samples is consistent with CBH model. - Abstract: This paper reports charge transport mechanism of polythiophene (PT) and its nanocomposites having various weight of zirconium dioxide (ZrO{sub 2}). Fourier transform infrared (FT-IR) spectral studies showed that the Zr ions mostly affected the C−S bond of the polythiophene. X-ray diffraction (XRD) patterns indicated that ZrO{sub 2} powder was a mixture of monoclinic (64.62%) and tetragonal (35.38%) phase. XRD measurements revealed that crystallinity of PT decreased with increasing doping level. Significant morphological differences were observed in scanning electron microscopy (SEM) images of PT depending on the doping process. Thermal analysis carried out by differential scanning calorimetry (DSC) indicated that the doping processes increased glass transition temperature of PT. The alternating current (ac) conductivity mechanism analysis by universal power law indicated that charge transport mechanism of both PT and PT/ZrO{sub 2} nanocomposites was consistent with correlated barrier hopping (CBH) model. The doping process and frequency affected the hopping distance between the sites.

36 MATERIALS SCIENCE↗

Fabrication of single phase p-CuInSe{sub 2} nanowire arrays by electrodeposited into anodic alumina templates

Single-phase CuInSe{sub 2} nanowire (NW) arrays were prepared at various pH values in a heated electrolyte by using pulse electrodeposition techniques and an anodized aluminum oxide template. X-ray diffraction showed that the CuInSe{sub 2} NW nucleation mechanism received H{sup +} constraints when the NWs were deposited at pH 1.7 with a (112) orientation and annealed at 550 °C. The CuInSe{sub 2} NW band gap was determined to be approximately 1 eV through optical measurements. Transmission electron microscopy showed that at the pH value of 1.7, small particles of the single-phase CuInSe{sub 2} NWs aligned along the crystallographic direction are nucleated to form large particles. Scanning electron microscopy revealed that the NW diameter and the length were 80 nm and 2.3 μm, respectively. From Mott–Schottky and Ohmic contact plots, the CuInSe{sub 2} NWs were found to be p-type semiconductors, and their work function was estimated to be approximately 4.69 eV.

36 MATERIALS SCIENCE↗

Influence of concentration and volume of precursor on the electrochemical properties of vanadium oxide thin films prepared by spray pyrolysis

Vanadium oxide (V{sub 2}O{sub 5}) thin films have been prepared by spray pyrolysis using different concentrations and volumes of precursor solution via aqueous route at 673K deposition temperature. The influences of concentration and volume on the structural, morphological and electrochemical properties of the deposited samples are studied well. X - ray diffraction study shows orthorhombic crystal structure with V{sub 2}O{sub 5} phase, confirmed by FTIR spectroscopy. Scanning electron microscopy shows granular, homogeneous and dense surface morphology. Cyclic voltammetery of all samples carried at all scan rates. Samples prepared using 0.05M, 40 ml of precursor solution shows highest specific capacitance 428.25 F/gm at 5 mV/s, Charge discharge behavior exhibits specific energy 18.73 Wh/kg, specific power 36.00 kW/kg, columbic efficiency 87.50 %. Impedance spectroscopy study was carried in the frequency range 1mHz – 1MHz, reveals pseudocapacitive behavior of the electrode exhibiting internal resistance 1.34 ohm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metalorganic chemical vapor deposition of ZnGeN 2 films on GaN: effects of cation stoichiometry on surface morphology and crystallinity

Novel optoelectronic device designs based on the heterostructures of III-N and II-IV-N 2 are promising to advance device performance significantly. For example, by utilizing InGaN-ZnGeN 2 quantum well (QW) structures instead of pure InGaN, the band structure engineering in the QW active region can lead to improved electron-hole wavefunction overlap, and thus enhance the radiative efficiency for photon generation. These novel heterostructures have great potential to address the current challenge of low quantum efficiency in InGaN QW based light emitting diodes emitting in green and beyond. The materials development of ZnGeN 2 is still at an early stage as compared to the much matured GaN material system. In an ideal octet rule preserving ordered structure of ZnGeN 2 , every N atom is coordinated by exactly two Zn and two Ge atoms. However, local violation of octet rule can be caused by non-ideal coordination of N by the cations. The disordered structure is thermodynamically less favorable but can still be achieved, for example, in kinetics-limited growth regime. The ordered ZnGeN 2 has a bandgap very close to that of GaN (~3.4 eV) and a lattice mismatch of <0.1% with GaN. Interestingly, the valence band of ZnGeN 2 has been predicted to be ~1 eV above that of GaN, which has inspired novel designs for high efficiency light emitters. In this work, we investigated the metalorganic chemical vapor deposition (MOCVD) of ZnGeN 2 films on GaN/c-sapphire templates. Diethylzinc (DEZn), germane (GeH4) and ammonia were used as the precursors for Zn, Ge and N, respectively. A systematic study was conducted to investigate the cation stoichiometry as a function of growth temperature (TG), total reactor pressure (P) and DEZn/GeH 4 molar flow rate ratio (RII/IV). Under the investigated growth window, the Zn/(Zn+Ge) composition in the films, determined from energy dispersive X-ray spectroscopy, decreased monotonically with increase in TG but increased with increase in P and RII/IV. Atom probe tomography data did not indicate the presence of any secondary phases such as Zn 3 N 2 or Ge 3 N 4 . The surface morphology and crystallinity of the grown films had strong correlation with the Zn/(Zn+Ge) composition. The scanning electron microscopy images showed that the near-stoichiometric films have planar surfaces whereas Zn-rich films had crystallites on their surface and the Zn-poor films had faceted surface. Scanning transmission electron microscopy (STEM) imaging revealed that the Zn-rich and Zn-poor films have columnar and filament-like morphology, respectively, whereas the near-stoichiometric films have continuous film-like cross-sectional morphology. TEM nano-diffraction patterns as well as X-ray diffraction 2θ-ω scan profiles indicate that the near stoichiometric films are single crystalline. Nano-diffraction pattern of the stoichiometric films resembled that of a disordered ZnGeN 2 structure. Room temperature Raman spectra of near-stoichiometric films showed only the phonon density of states like features of a cation disordered ZnGeN 2 . Cathodoluminescence and photoluminescence spectra measured at different temperatures had similar features with peak emission wavelength at ~ 2 eV. In conclusion, the stoichiometry of ZnGeN 2 films can be widely tuned by tuning the MOCVD growth parameters. The surface morphology and the crystallinity of the films were found to have strong correlation with the Zn/(Zn+Ge) composition. The stoichiometric ZnGeN 2 films grown on GaN were demonstrated with uniform surface morphology and high crystalline quality. The results from this work will provide pathway to implement ZnGeN 2 in device structures.

Karim, Md Rezaul↗

The influence of electrochemical cycling protocols on capacity loss in nickel-rich lithium-ion batteries

The transition towards electric vehicles and more sustainable transportation is dependent on lithium-ion battery (LIB) performance. Ni-rich layered transition metal oxides, such as NMC811 (LiNi 0.8 Mn 0.1 Co 0.1 O 2 ), are promising cathode candidates for LIBs due to their higher specific capacity and lower cost compared with lower Ni content materials. However, complex degradation mechanisms inhibit their use. In this work, tailored aging protocols are employed to decouple the effect of electrochemical stimuli on the degradation mechanisms in graphite/NMC811 full cells. Using these protocols, impedance measurements, and differential voltage analysis, the primary drivers for capacity fade and impedance rise are shown to be large state of charge changes combined with high upper cut-off voltage. Focused ion beam-scanning electron microscopy highlights that extensive microscale NMC particle cracking, caused by electrode manufacturing and calendering, is present prior to aging and not immediately detrimental to the gravimetric capacity and impedance. Scanning transmission electron microscopy electron energy loss spectroscopy reveals a correlation between impedance rise and the level of transition metal reduction at the surfaces of aged NMC811. The present study provides insight into the leading causes for LIB performance fading, and highlights the defining role played by the evolving properties of the cathode particle surface layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A microfluidic electrochemical cell for studying the corrosion of uranium dioxide (UO 2 )

We have developed a specialized microfluidic electrochemical cell that enables in situ investigation of the electrochemical corrosion of microgram quantities of redox active solids. The advantage of downscaling is the reduction of hazards, waste, expense, and greatly expanding data collection for hazardous materials, including radioactive samples. Cyclic voltammetry was used to monitor the oxidation–reduction cycle of minute quantities of micron-size uraninite (UO 2 ) particles, from the formation of hexavalent uranium (U(VI)), U 3 O 7 and reduction to UO 2+x . Reaction progress was also studied in situ with scanning electron microscopy. The electrochemical measurements matched those obtained at the bulk-scale and were consistent with ex situ characterization of the run products by X-ray photoelectron spectroscopy, scanning transmission electron microscopy, and atomic force microscopy; thus, demonstrating the utility of the microfluidic approach for studying radioactive materials.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Fabrication and Characterization of A5083-WC-Al{sub 2}O{sub 3} Surface Composite by Friction Stir Processing

In this study, WC-Al{sub 2}O{sub 3} ceramic composite was incorporated into Al5083 to produce a surface composite by friction stir processing (FSP), and the microstructure, hardness and wear properties of Al5083-WC-Al{sub 2}O{sub 3} surface composite were evaluated. Optical microscopy of FSPed samples showed grain refinement in the stir zone. The addition of WC-Al{sub 2}O{sub 3} particles as well as increase in FSP pass number had a considerable effect on grain refinement, and the grain size of Al5083 base metal of 36 µm reduced to 11 µm for Al5083-WC-Al{sub 2}O{sub 3} surface composite after four passes. The SEM observation of the surface composite revealed that the WC-Al{sub 2}O{sub 3} particles distributed homogenously in the matrix and by increasing the FSP passes, the initial agglomerates of mechanochemically synthesized WC-Al{sub 2}O{sub 3} powders could be fractured. Microhardness evaluation showed a substantial improvement by adding WC-Al{sub 2}O{sub 3} particles and increase in FSP pass number. The maximum microhardness value of 101 HV belonged to surface composite after four passes, while the microhardness of the base metal was 65 HV. Wear test results revealed enhanced tribological behavior with a similar trend of microhardness values. Scanning electron microscopy tests revealed both adhesive and abrasive wear mechanisms on the surface of the wear test specimens.

36 MATERIALS SCIENCE↗

Efficient SnO{sub 2}/CuO/porous silicon nanocomposites structure for NH{sub 3} gas sensing by incorporating CuO nanoparticles

In this paper, a porous silicon (Psi) surface modification process, including the incorporating of pure and CuO mixed SnO{sub 2} within a Psi layer, was investigated. A Psi layer with a pore-like structure prepared via laser-assisted etching process with a laser illumination intensity of (40) mW/cm{sup 2} was employed as a substrate for materialization SnO{sub 2}/CuO/Psi nanocomposites for gas sensing application. Pure SnO{sub 2} and SnO{sub 2}:CuO nanoparticles were synthesized via a chemical spray pyrolysis process on the Psi surface at 350 °C. The materialization of SnO{sub 2}:CuO/Psi nanocomposites were recognized through Field-Emission Scanning Electron Microscopy, X-ray Diffraction, Atomic Force Microscopy, and Energy-dispersive X-ray Analysis. The results displayed that the morphological properties of SnO{sub 2}:CuO nanoparticles were definitely controlled by varying the CuO contents. Different shapes (nearly cubic shape and spherical shape) with various sizes of SnO{sub 2} and SnO{sub 2}:CuO within the Psi surface were achieved by increasing the CuO content. SnO{sub 2}:CuO/Psi nanocomposites, plans, grain size, average surface roughness, homogeneity and specific surface area of SnO{sub 2}:CuO nanoparticles were considerably influenced by CuO content. The lower grain size and higher average surface roughness and specific surface area were attained when the percentage of CuO was about 30% within the structure of 70% SnO{sub 2}:30% CuO, and the performance of the NH{sub 3} gas sensor revealed a short response time with a high sensitivity of (88%).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermally initiated disproportionation of manganese(II) bis(1-hydroxyethylidene)diphosphonate. Formation and properties of the lepidoid structure of manganese(II) (1-hydroxyethylidene)diphosphonate-2-hydroxyethaneaminium whiskers. Agronomical efficiency of the manganese(II) complex with (1-hydroxyethylidene)diphosphonic acid

The reaction of poorly soluble manganese(II) bis(1-hydroxyethylidene)diphosphonate tetrahydrate (Mn(H{sub 3}L){sub 2}•4H{sub 2}O) with 2-aminoethanol (H{sub 2}NCH{sub 2}CH{sub 2}OH) in an aqueous medium on heating to 70—80 оС causes the initial formation of soluble manganese(II) bis(1-hydroxyethylidene)diphosphonate tris(1-hydroxyethaneaminium) (Mn(H{sub 3}L)2• •3H{sub 2}NCH{sub 2}CH{sub 2}OH•4H{sub 2}O), which then disproportionates to slightly soluble manganese(II) (1-hydroxyethylidene)diphosphonate-2-hydroxyethaneaminium (MnH{sub 2}L•H{sub 2}NCH{sub 2}CH{sub 2}OH) and coordination polymer of 1-hydroxyethylidenediphosphonic acid with 2-aminoethanol containing no metal cations. In the course of the reaction, MnH{sub 2}L•H{sub 2}NCH{sub 2}CH{sub 2}OH precipitates as whiskers that are grouped into a leaf (lepidoid) structure. The latter was examined by IR spectroscopy, X-ray phase analysis, scanning electron microscopy, atomic force microscopy, optical microscopy, and thermal desorption of nitrogen. The starting and resulting manganese compounds refer to poorly soluble crystalline complexes. The presence of a 2-aminoethanol molecule in the final product leads to an increase in the solubility from 0.40 to 0.54 g in 100 mL of the solution. Poorly soluble MnH{sub 2}L•H{sub 2}NCH{sub 2}CH{sub 2}OH is easily converted to a soluble form by the treatment with 2-aminoethanol or 2-amino-2-(hydroxy- methyl)propane-1,3-diol (H{sub 2}NC(CH{sub 2}OH)3). The agronomical efficiency of a solution of the Mn(H{sub 3}L){sub 2}•3H{sub 2}NCH{sub 2}CH{sub 2}OH•4H{sub 2}O complex was studied on the cultures of white lupine Degas, spring wheat Ester, spring rape, and pea Stabil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fission Products Distribution in TRISO Coated Fuel Particles Irradiated to 3.22 x 1021 n/cm2 Fast Fluence at 1092°C

Mechanisms by which fission products (especially Ag) migrate across the intact coating layers of tristructural isotropic (TRISO) coated fuel particles designed for next generation nuclear reactors have been the subject of numerous studies but remain poorly understood. This paper presents results obtained from the electron microscopic examination of selected irradiated tristructural isotropic (TRISO) coated particles (CPs) taken from fuel Compact 3-1-1 irradiated in Advanced Gas Reactor (AGR) experiment AGR-1. Studying this particles are of specific interest as it was fabricated using a different carrier gas composition ratio for the SiC layer deposition compared with the baseline fuel coated particles reported previously. These fabrication parameters are expected to reduce defects in the SiC layers resulting from uranium dispersion and potentially reducing the SiC layer permeability for metallic fission products. Basic scanning electron microscopy (SEM) and SEM montage investigations of the particles indicate that the number density of fission products in the inner pyrolytic carbon (IPyC) layer is far higher than that in the SiC layer, and that the number density of fission products in the SiC layer is far lower than the corresponding value for compacts with baseline fuel. Preliminary comparative fission product distribution montages suggest that the SiC layers of particles in Compact 1-3-1 are less permeable to fission products than those in compacts with baseline fuel. Transmission electron microscopy (TEM) samples were sectioned by focused ion beam (FIB) technique from the IPyC layer, the SiC layer and the IPyC-SiC interlayer of the particle. Detailed TEM and scanning transmission electron microscopy (STEM) coupled with energy dispersive X-ray spectroscopy (EDS) or electron energy loss spectroscopy (EELS) were performed to identify fission products and characterize their distribution across the IPyC and the SiC layers. Based on the distribution of the fission products, transport mechanisms are discussed and proposed, with emphasis placed on Ag. Our study contributes to enhancing the understanding of fission product transport mechanisms in TRISO coated fuel particles with SiC layer possessing reduced concentration of processing defects.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Workflow Using a Cryogenic Coincident Fluorescence, Electron, and Ion Beam Microscope for Targeted Milling of Cells

This workflow enables lamella production targeting fluorescently labeled biological structures that are small (<1 μm in axial extent) and rare (1 copy per cell) using a cryogenic tri-coincident imaging platform. In conclusion, this platform integrates fluorescence microscopy, focused ion beam milling, and scanning electron microscopy at a single focal position and enables simultaneous fluorescence microscopy while milling.

Wang, Jue [California Institute of Technology (Cal↗

Electrical properties of films of zinc oxide nanoparticles and its hybrid with reduced graphene oxide

Free-standing films of ZnO nanoparticles (NPs) and reduced graphene oxide (rGO)-ZnO NPs hybrid are prepared at a liquid/liquid interface. The films are characterized by UV-visible spectroscopy, X-ray diffraction, scanning electron microscopy and atomic force microscopy. ZnO film consists of spherical aggregated NPs while the hybrid film contains folded sheets of rGO with embedded ZnO NPs. Electrical properties of the films and its photoresponse in presence of UV radiation are investigated using current sensing atomic force microscopy (CSAFM) at nanoscale and bulk measurements using two probe methods. Enhancement in photocurrent is observed in both cases and the current imaging reveals an inhomogeneous contribution by different ZnO grains in the film.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of the physical properties of CuS thin films grown by SILAR method

CuS thin films were obtained using the SILAR method on an amorphous glass substrate. All experiments were performed at room temperature. CuS thin films were deposited at 30, 40, 50 and 60 cycles, respectively. Structural, morphological and optical properties of the structures that increase the thickness of nanostructured CuS thin films were investigated. X-ray diffraction, scanning electron microscopy, atomic force microscopy, RAMAN and optical absorption measurements were carried out in order to examine the physical properties of CuS thin films. As a result of the analysis, we can say that the thickness increase positively affects the crystal structure of CuS thin films. In addition, the energy bandgap range of CuS thin films ranged from 2.22 to 1.78 eV. Analysis results of CuS thin films using SILAR method show that thickness is an important factor for thin film studies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural evolution and strain induced mixing in Cu–Co composites studied by transmission electron microscopy and atom probe tomography

A Cu–Co composite material is chosen as a model system to study structural evolution and phase formations during severe plastic deformation. The evolving microstructures as a function of the applied strain were characterized at the micro-, nano-, and atomic scale-levels by combining scanning electron microscopy and transmission electron microscopy including energy-filtered transmission electron microscopy and electron energy-loss spectroscopy. The amount of intermixing between the two phases at different strains was examined at the atomic scale using atom probe tomography as complimentary method. It is shown that Co particles are dissolved in the Cu matrix during severe plastic deformation to a remarkable extent and their size, number, and volume fraction were quantitatively determined during the deformation process. From the results, it can be concluded that supersaturated solid solutions up to 26 at.% Co in a fcc Cu–26 at.% Co alloy are obtained during deformation. However, the distribution of Co was found to be inhomogeneous even at the highest degree of investigated strain. - Highlights: • Structural evolution in a deformed Cu–Co composite is studied on all length scales. • Amount of intermixing is examined by atom-probe tomography. • Supersaturated solid solutions up to 26 at.% Co in Cu are observed.

36 MATERIALS SCIENCE↗