Search NASA⌕ Search

SEARCH · Search NASA

Results for “Algorithmic Optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

OPTIMAL CONTROL AND ENERGY-SAVING ANALYSIS OF COMMON PRESSURE RAIL ARCHITECTURES: HHEA & STEAM

In recent years several novel hydraulic architectures have been proposed with the intention of significantly increasing system efficiency. Two of these architectures, Steigerung der Energieeffizienz in der Arbeitshydraulik mobiler Arbeitsmaschinen (STEAM), and the Hybrid Hydraulic-Electric Architecture (HHEA), use a system of multiple common pressure rails (CPRs) to serve the multiple degrees-of-freedom of the machine. The key difference is that STEAM throttles hydraulic power from these rails while HHEA combines electric and hydraulic power to meet actuator demands. As a throttle-less architecture, HHEA is expected to save more energy than STEAM at the expense of added complexity. Therefore, it is useful to quantify this additional energy saving. Both systems have discrete operational choices corresponding to how the CPRs are utilized for each actuator. It is necessary to determine optimal operation for each of these architectures for analysis and fair comparison. Techniques for optimal operation of the HHEA have been developed previously from the Langrange multiplier method. Applying the same optimal control method to STEAM encountered some technical challenge leading to the optimal control algorithm not being able to satisfy certain constraints. The issue is analyzed and solved by adding noise to the optimization. Using this proposed algorithm, case studies are performed to compare the energy-saving potentials of STEAM and HHEA for two sizes of excavators and a wheel-loader performing representative duty cycles. The baseline is a standard load-sensing architecture. Results show that STEAM and HHEA can reduce energy consumption between 35-65% and 50-80% respectively

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Hardware-in-the-Loop Evaluation of an Advanced Distributed Energy Resource Management Algorithm

This paper presents the laboratory performance evaluation of voltage regulation under a new distributed energy resource management system (DERMS) algorithm via an advanced hardware-in-the-loop (HIL) platform. The HIL platform provides realistic testing in a laboratory environment, including the accurate modeling of a full-scale real-world distribution system from a utility partner, the DERMS software controller, and power hardware photovoltaic (PV) inverters. The new DERMS algorithm is developed based on online multi-objective optimization (OMOO) algorithms that perform fast dispatch of distributed solar PV simulated in a real-time digital simulator and real physical hardware devices. Experimental tests confirm the correct functioning of the HIL platform for evaluating controller algorithms and satisfactory voltage regulation performance of the developed OMOO algorithms.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2024

Diagnostics of Mixed-State Topological Order and Breakdown of Quantum Memory

Topological quantum memory can protect information against local errors up to finite error thresholds. Such thresholds are usually determined based on the success of decoding algorithms rather than the intrinsic properties of the mixed states describing corrupted memories. Here we provide an intrinsic characterization of the breakdown of topological quantum memory, which both gives a bound on the performance of decoding algorithms and provides examples of topologically distinct mixed states. We employ three information-theoretical quantities that can be regarded as generalizations of the diagnostics of ground-state topological order, and serve as a definition for topological order in error-corrupted mixed states. We consider the topological contribution to entanglement negativity and two other metrics based on quantum relative entropy and coherent information. In the concrete example of the two-dimensional (2D) Toric code with local bit-flip and phase errors, we map three quantities to observables in 2D classical spin models and analytically show they all undergo a transition at the same error threshold. This threshold is an upper bound on that achieved in any decoding algorithm and is indeed saturated by that in the optimal decoding algorithm for the Toric code. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

TH-EF-BRB-03: Significant Cord and Esophagus Dose Reduction by 4π Non-Coplanar Spine Stereotactic Body Radiation Therapy and Stereotactic Radiosurgery

Purpose: To demonstrate significant organ-at-risk (OAR) sparing achievable with 4π non-coplanar radiotherapy on spine SBRT and SRS patients. Methods: Twenty-five stereotactic spine cases previously treated with VMAT (n = 23) or IMRT (n = 2) were included in this study. A computer-aided-design model of a Linac with a 3D-scanned human surface was utilized to determine the feasible beam space throughout the 4π steradian and beam specific source-to-target-distances (STD) required for collision avoidance. 4π radiotherapy plans integrating beam orientation and fluence map optimization were then created using a column-generation algorithm. Twenty optimal beams were selected for each case. To evaluate the tradeoff between dosimetric benefit and treatment complexity, 4π plans including only isocentrically deliverable beams were also created. Beam angles of all standard and isocentric 4π plans were imported into Eclipse to recalculate the dose using the same calculation engine as the clinical plans for unbiased comparison. OAR and PTV dose statistics for the clinical, standard-4π, and isocentric-4π plans were compared. Results: Comparing standard-4π to clinical plans, particularly significant average percent reduction in the [mean, maximum] dose of the cord and esophagus of [41%, 21.7%], and [38.7%, 36.4%] was observed, along with global decrease in all other OAR dose statistics. The average cord volume receiving more than 50% prescription dose was substantially decreased by 76%. In addition, improved PTV coverage was demonstrated with a maximum dose reduction of 0.93% and 1.66% increase in homogeneity index (D95/D5). All isocentric-4π plans achieved dosimetric performance equivalent to that of the standard-4π plans with higher delivery complexity. Conclusion: 4π radiotherapy significantly improves stereotactic spine treatment dosimetry. With the substantial OAR dose sparing, PTV dose escalation is considerably safer. Isocentric-4π is sufficient to achieve the dosimetric gain. The successful implementation of 4π using an FDA approved planning system paves the way for a prospective clinical trial. Varian Medical Systems, NIH R43CA183390 and R01CA188300, NSF graduate research fellowship DGE-1144087.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Multiobjective Hyperparameter Optimization for Deep Learning Interatomic Potential Training Using NSGA-II

Deep neural network (DNN) potentials are an emerging tool for simulation of dynamical atomistic systems, with the promise of quantum mechanical accuracy at speedups of 10000$\times$. As with other DNN methods, hyperparameters used during training can make a substantial difference in model accuracy, and optimal settings vary with dataset. To enable rapid tuning of hyperparameters for DNN potential training, we developed a scalable multiobjective optimization evolutionary algorithm for supercomputers and tested it on the Summit system at the Oak Ridge Leadership Computing Facility (OLCF). The multiobjective approach is required due to the coupling of two learned values defining the potential: the energy and force. Using a large-scale implementation of the NSGA-II algorithm adapted for training DNN potentials, we discovered several optimal multiobjective combinations, including best choices of activation functions, learning rate scaling scheme, and pairing of the two radial cutoffs used in the three dimensional descriptor function.

Coletti, Mark↗
DOE OSTI2025

Speed Optimizations for Physics Ray Trace Algorithms

Ray tracing is a process used commonly in computer graphics and in physics to track light photons and particles, respectively. Much research was found on improving execution times for the computer graphics applications; however, in the short time frame of this literary review, almost no research was found on improving the execution times for the physics applications that were relevant to this problem. Two ray trace algorithms, a STL raytrace and a conebeam raytrace, were optimized using OpenMP and CUDA.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Development of Genetic Algorithm Based Multi-Objective Plant Reload Optimization Platform

The U.S. nuclear industry is facing a challenge in maintaining required levels of safety while ensuring economic competitiveness to stay in business. Safety remains a key parameter for all aspects of light-water reactor nuclear power plant operations. Safety can become more economical by using a risk-informed ecosystem, such as the one being developed in the Risk-Informed Systems Analysis Pathway under the U.S. Department of Energy Light Water Reactor Sustainability Program. The Light Water Reactor Sustainability Program promotes a wide range of research and development activities to maximize both the safety and economic efficiency of nuclear power plants through improved scientific understanding, especially given that many plants are now considering second license renewals. The Risk-Informed Systems Analysis Pathway has two main goals: Deploy methodologies and technologies that better represent safety margins and cost and safety factors; Develop advanced applications that enable cost-effective plant operations. The Plant Reload Optimization Platform development project aims to build a reactor core design tool that includes reactor safety and fuel performance analyses and uses artificial intelligence to support the optimization of core design solutions. This report summarizes genetic-algorithm-based multi-objective fuel reload optimization activities, specifically: Developing the non-dominated sorting genetic algorithm II optimizer in the Risk Analysis and Virtual ENviroment (RAVEN); Demonstrating and validating the developed non-dominated sorting genetic algorithm II optimizer using benchmark optimization problems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Solid State Power Substation DC Node Optimization and Controller Hardware-In-The-Loop Demonstration

A solid state power substation (SSPS) node is a microgrid that integrates distributed energy resources and loads and injects/absorbs power to/from the SSPS distribution network. It is an essential building block of a futuristic distribution grid network. This paper presents the development and demonstration of optimization use cases of a SSPS DC node. By adopting multi-layer hierarchical control architecture and developing automatic device identification and dynamic optimization formulation algorithms, the SSPS DC node can perform plug-and-play resource integration and seamless transition of the optimized node operation under on and off grid condition without sophisticated algorithms, control mode changes, and user interactions. Four optimization use cases including economic dispatches with price signal changes, a sudden PV power drop, and a single directional meter and its associated costs with sending power back to the grid, and resiliency under a grid inverter trip condition were demonstrated through the real-time controller hardware-in-the-loop simulation.

Kim, Namwon↗
DOE OSTI2022

Optimal Power Dispatch of DGs in Radial and Mesh AC Grids: A Hybrid Solution Methodology between the Salps Swarm Algorithm and Successive Approximation Power Flow Method

In this paper, we address the problem of the optimal power dispatch of Distributed Generators (DGs) in Alternating Current (AC) networks, better known as the Optimal Power Flow (OPF) problem. We used, as the objective function, the minimization of power losses (P loss ) associated with energy transport, which are subject to the set of constraints that compose AC networks in an environment of distributed generation. To validate the effectiveness of the proposed methodology in solving the OPF problem in any network topology, we employed one 10-node mesh test system and three radial text systems: 10, 33, and 69 nodes. In each test system, DGs were allowed to inject 20%, 40%, and 60% of the power supplied by the slack generator in the base case. To solve the OPF problem, we used a master–slave methodology that integrates the optimization method Salps Swarm Algorithm (SSA) and the load flow technique based on the Successive Approximation (SA) method. Moreover, for comparison purposes, we employed some of the algorithms reported in the specialized literature to solve the OPF problem (the continuous genetic algorithm, the particle swarm optimization algorithm, the black hole algorithm, the antlion optimization algorithm, and the Multi-Verse Optimizer algorithm), which were selected because of their excellent results in solving such problems. The results obtained by the proposed solution methodology demonstrate its superiority and convergence capacity in terms of minimization of P loss in both radial and mesh systems. It provided the best reduction in minimum P loss in short processing times and showed excellent repeatability in each test system and scenario under analysis.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2017

A First-order Prediction-Correction Algorithm for Time-varying (Constrained) Optimization: Preprint

This paper focuses on the design of online algorithms based on prediction-correction steps to track the optimal solution of a time-varying constrained problem. Existing prediction-correction methods have been shown to work well for unconstrained convex problems and for settings where obtaining the inverse of the Hessian of the cost function can be computationally affordable. The prediction-correction algorithm proposed in this paper addresses the limitations of existing methods by tackling constrained problems and by designing a first-order prediction step that relies on the Hessian of the cost function (and do not require the computation of its inverse). Analytical results are established to quantify the tracking error. Numerical simulations corroborate the analytical results and showcase performance and benefits of the algorithms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

A Hierarchical Optimization Method for Electric Vertical Takeoff and Landing Aircraft Network Design

Electric vertical takeoff and landing aircraft (eVTOLs) are expected to serve urban air mobility in a station-to-station configuration, which makes the optimal network design of eVTOL stations a critical question to explore. Existing approaches often face limitations, such as the inability to interact station locations with demand or difficulty in finding the optimal solution for large study regions. Here, this paper first proposes a mathematical model to generate optimal eVTOL station locations while considering associated potential eVTOL demand, and then proposes a heuristic algorithm, Hierarchical Optimization MEthod (HOME), to efficiently solve the model. With a case study of Southern California, HOME was compared to 1) directly solving the original integer linear programming-based network design problem, and 2) employing the widely used genetic algorithm. Results suggest that HOME can find optimal solutions with limited computational resources. The proposed framework powered by HOME provides a computationally efficient way to support urban air mobility planning.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Bounded-Degree Approximations of Stochastic Networks

We propose algorithms to approximate directed information graphs. Directed information graphs are probabilistic graphical models that depict causal dependencies between stochastic processes in a network. The proposed algorithms identify optimal and near-optimal approximations in terms of Kullback-Leibler divergence. The user-chosen sparsity trades off the quality of the approximation against visual conciseness and computational tractability. One class of approximations contains graphs with speci ed in-degrees. Another class additionally requires that the graph is connected. For both classes, we propose algorithms to identify the optimal approximations and also near-optimal approximations, using a novel relaxation of submodularity. We also propose algorithms to identify the r-best approximations among these classes, enabling robust decision making.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Optimization and supervised machine learning methods for fitting numerical physics models without derivatives

Here, we address the calibration of a computationally expensive nuclear physics model for which derivative information with respect to the fit parameters is not readily available. Of particular interest is the performance of optimization-based training algorithms when dozens, rather than millions or more, of training data are available and when the expense of the model places limitations on the number of concurrent model evaluations that can be performed. As a case study, we consider the Fayans energy density functional model, which has characteristics similar to many model fitting and calibration problems in nuclear physics. We analyze hyperparameter tuning considerations and variability associated with stochastic optimization algorithms and illustrate considerations for tuning in different computational settings.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

A Transfer Learning Strategy for Improving the Data Efficiency of Deep Reinforcement Learning Control in Smart Buildings

Reinforcement learning (RL) is a powerful tool that has shown promising results in many domains such as robotics and game-playing. Because RL algorithms learn optimal control policies by continuously interacting with their environments, these algorithms require a lot of data to learn, which limits their application to a wide range of domains. For this reason, there is an immense need for improving the training and data efficiency of RL. Towards addressing this research gap, this paper proposes a transfer learning (TL) approach to improve the efficiency of the RL algorithms by reducing data need and, thus, reducing training time. To demonstrate the proposed approach, a knowledge transfer from a set of buildings to another building was conducted. The results show that the proposed TL approach is a promising method that can efficiently harness the information from similar RL tasks and reduce the data needs of RL algorithms.

Amasyali, Kadir↗
DOE OSTI2024

Precision Computations in Strongly Coupled Conformal Field Theories (Final Technical Report)

Conformal Field Theories (CFTs) are quantum field theories that are invariant under the conformal symmetry group (which includes translations and rotations, but also local rescalings of spacetime). They are building blocks of general quantum field theories, and appear in many areas of physics, including statistical physics, condensed matter physics, particle physics, and quantum gravity. Because of their extra symmetries, the mathematical structure of CFTs is tightly constrained, and this leads to the idea of the ``conformal bootstrap," which is to use these mathematical structures to constrain, and in some cases determine, CFT observables. A new numerical implementation of the conformal bootstrap idea appeared in 2008 with the work of Rattazzi, Rychkov, Tonni, and Vichi. Their observation was that certain bootstrap constraints (conformal symmetry and unitarity) could be combined to yield a convex optimization problem that constraints CFT data. By solving this convex optimization problem on a computer, one could obtain bounds on observables like critical exponents and operator product expansion (OPE) coefficients. Over the course of this award, the PI has improved numerical bootstrap techniques by optimizing known algorithms and finding new ones for performing the required convex optimization computations. The PI has applied these techniques to compute high-precision observables in several important strongly-coupled systems. The PI has also explored both analytical and numerical bootstrap methods for constraining the space of low energy effective field theories of quantum gravity, and developed new analytical techniques for CFT and QFT more broadly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Algorithm 1028: VTMOP: Solver for Blackbox Multiobjective Optimization Problems

VTMOP is a Fortran 2008 software package containing two Fortran modules for solving computationally expensive bound-constrained blackbox multiobjective optimization problems. VTMOP implements the algorithm of [32], which handles two or more objectives, does not require any derivatives, and produces well-distributed points over the Pareto front. The first module contains a general framework for solving multiobjective optimization problems by combining response surface methodology, trust region methodology, and an adaptive weighting scheme. The second module features a driver subroutine that implements this framework when the objective functions can be wrapped as a Fortran subroutine. Lastly, support is provided for both serial and parallel execution paradigms, and VTMOP is demonstrated on several test problems as well as one real-world problem in the area of particle accelerator optimization.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Optimizing the Accelerated Recursive Doubling Algorithm for Block Tridiagonal Systems of Equations

The need to solve block tridiagonal systems with hundreds or thousands of right-hand sides for the same block tridiagonal matrix is common in a variety of disciplines. To meet this need, the Accelerated Recursive Doubling Algorithm was developed. After a right-hand side independent phase, the algorithm allows for the quick, online calculation of solutions for different right-hand sides. In this work, we present methods to optimize the Accelerated Recursive Doubling Algorithm in memory usage and computation time in a hybrid parallelization model. The right-hand side independent phase of the naïve implementation takes ≥ 11/3 the amount of memory required to store the tridiagonal matrix, while our implementation reduces the fraction to ≈ 5/3 . The right-hand side dependent phase of the naïve implementation takes ≥ 6 times the amount of memory required to store the right-hand side, while our implementation reduces the fraction to ≈ 3. The computation time for the independent phase is reduced to ≈ 2/3 times that of the naïve implementation, while the computation time for the dependent phase is reduced to ≈ 5/9 . With increasing numbers of shared-memory threads q on every distributed processing element, we have O(q) theoretical speedup.

97 MATHEMATICS AND COMPUTING↗