Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coating processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Low temperature fabrication of perovskite solar cells with TiO{sub 2} nanoparticle layers

TiO{sub 2}/CH{sub 3}NH{sub 3}PbI{sub 3}-based photovoltaic devices were fabricated by a spin-coating method using a mixture solution. TiO{sub 2} require high-temperature processing to achieve suitably high carrier mobility. TiO{sub 2} electron transport layers and TiO{sub 2} scaffold layers for the perovskite were fabricated from TiO{sub 2} nanoparticles with different grain sizes. The photovoltaic properties and microstructures of solar cells were characterized. Nanoparticle sizes of these TiO{sub 2} were 23 nm and 3 nm and the performance of solar cells was improved by combination of two TiO{sub 2} nanoparticles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Performance of aluminide coatings applied on alloy CF8C plus at 800 C

The cost effective, austenitic stainless steel CF8C plus is an attractive alloy for massive cast structures such as steam turbine casings. The microstructure stability and creep strength of this alloy are better than commercial high-performance heat-resistant steels such as NF709 and Super 304H, and are comparable to the Ni-based superalloy Inconel 617. The oxidation resistance of the alloy in atmosphere rich in water vapor is however insufficient at T>800 C, and the use of diffusion aluminide coatings is considered for potential high temperature applications. The thermal stability and protectiveness of coatings applied on the CF8C plus substrate by pack cementation and slurry process were investigated in air + 10% H2O environment at 800 C. Further, the coating effect on the fatigue life of the alloy was assessed via low-cycle-fatigue experiments.

36 MATERIALS SCIENCE↗

Improved Superconducting Properties in Graphene-Doped MgB{sub 2} Prepared by Coating Method

The effects of graphene doping on the phase formation and superconductivity of MgB{sub 2} bulks synthesized with different process have been studied systemically. Considering the scattering structure of graphene, coating method was applied to enhance the uniformity of graphene doping. The graphene coated B addition was expected to improve the critical current density of MgB{sub 2} bulks. In our study, several experiments were performed to find out the suitable way for graphene doping. The coating method could enhance the critical current density of MgB{sub 2} from 1.9 × 10{sup 5} to 2.5 × 10{sup 5} A/cm{sup 2} at 20 K and 0 T, compared with that of the undoped sample. And the superconductivity of MgB{sub 2} prepared by coating method got obvious improvement at high field compared with that of pure graphene doping bulk. It can be concluded that the coating method could ensure the uniformity of graphene doping in MgB{sub 2} and refined the grain crystalline effectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantifying Pore Morphology in Spray-Formed Tantalum Using X-ray Micro-computed Tomography

In order to establish quantitative process–structure–property relationships in thermal spray coatings, a robust framework for defining (micro)structural characteristics is needed. Here, we present a quantitative characterization of the three-dimensional morphology of porosity in spray-formed tantalum samples based on high-resolution X-ray micro-computed tomography. Using synchrotron facilities, we acquired dozens of high-resolution scans, enabling a statistically meaningful comparison across multiple samples, different regions within samples, and spray processes. We quantify the spatial distribution, size, and topology of porous inclusions, with a significant focus on variability across samples and different spray processes (plasma and cold sprayed), as well as sensitivity to image segmentation and resolution. Based on a typical segmentation, we report porosities ranging from 0.9 to 1.7 pct for all samples tested, with significant sensitivity due to image segmentation resulting in estimates as low as 0.6 pct and as high as 4.8 pct. For the complex pore space morphology observed in these materials, we argue that a conventional analysis based on identifying individual pores is not well suited, and propose an alternative approach based on morphological metrics with a rich history in porous media literature, such as spatial correlations, local pore thickness, and scale-dependent sub-sampling. Spatial correlations indicate anisotropic splat structures, but only mildly anisotropic pores. Various measures of pore size show a wide distribution of sizes, ranging from sub-micron to 10-micron length scales. Scale-dependent variations in porosity suggest that representative volumes of several hundred microns are required for convergence of morphological metrics, with larger volumes for cold-spray materials. This work provides a robust quantitative basis for describing three-dimensional pore structure in thermal spray coatings.

36 MATERIALS SCIENCE↗

Toward a Biocompatible and Degradable Battery Using a Mg-Zn-Zr Alloy with β-Tricalcium Phosphate Nanocoating as Anode

A biocompatible β-tricalcium phosphate (β-TCP) nanorod coating on Mg-3 wt.%Zn-0.8 wt.%Zr alloy (MZZ) was fabricated by a chemical solution process. The microstructure and corrosion resistance of β-TCP coating on MZZ were studied using scanning electron microscopy, x-ray diffraction, and potentiodynamic polarization. β-TCP-MZZ was used as the anode for Mg battery with simulated body fluid directly acting as the electrolyte. The experimental results indicate that the β-TCP nanorod coating formed on the surface of MZZ alloy protects the matrix and improves the corrosion resistance of MZZ alloy. The Mg battery showed a voltage of 1.05 V for up to 75 days and continued to discharge for 90 days until 0.7 V at 100 μA/cm{sup 2}. This indicates potential practical importance of biodegradable batteries.

36 MATERIALS SCIENCE↗

Multi-resolution 3D visualization of the early stages of cellular uptake of peptide-coated nanoparticles

A detailed understanding of the cellular uptake process is essential to the development of cellular delivery strategies and to the study of viral trafficking. However, visualization of the entire process, encompassing the fast dynamics (local to the freely diffusing nanoparticle) as well the state of the larger-scale cellular environment, remains challenging. Here, we introduce a three-dimensional multi-resolution method to capture, in real time, the transient events leading to cellular binding and uptake of peptide (HIV1-Tat)-modified nanoparticles. Applying this new method to observe the landing of nanoparticles on the cellular contour in three dimensions revealed long-range deceleration of the delivery particle, possibly due to interactions with cellular receptors. Furthermore, by using the nanoparticle as a nanoscale ‘dynamics pen’, we discovered an unexpected correlation between small membrane terrain structures and local nanoparticle dynamics. This approach could help to reveal the hidden mechanistic steps in a variety of multiscale processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Formation and properties of biocoatings based on wollastonite and calcium phosphates

Wollastonite-calcium phosphate coatings were produced on titanium substrates by micro-arc oxidation method. There presented the study of influence of oxidation voltage, process duration and pulse duration on properties of the coatings such as thickness, surface morphology and surface roughness. The morphology and phase composition of the coatings were studied by scanning electron microscopy and X-ray diffraction methods. It was found that biocoatings with large amount of wollastonite particles were deposited under minimum oxidation voltage of 130–150 V. The structural elements with a spherical or plate-like shape were formed on the coating surface depending on micro-arc oxidation parameters.

36 MATERIALS SCIENCE↗

Manufacturing of High-Efficiency Bi-Facial Tandem Concentrator Solar Cells: February 20, 2009--August 20, 2010

Spire Semiconductor made concentrator photovoltaic (CPV) cells using a new bi-facial growth process and met both main program goals: a) 42.5% efficiency 500X (AM1.5D, 25C, 100mW/cm2); and b) Ready to supply at least 3MW/year of such cells at end of program. We explored a unique simple fabrication process to make a N/P 3-junction InGaP/GaAs/InGaAs tandem cells . First, the InGaAs bottom cell isgrown on the back of a GaAs wafer. The wafers are then loaded into a cassette, spin-rinsed to remove particles, dipped in dilute NH4OH and spin-dried. The wafers are then removed from the cassette loaded the reactor for GaAs middle and InGaP top cell growth on the opposite wafer face (bi-facial growth). By making the epitaxial growth process a bit more complex, we are able to avoid more complexprocessing (such as large area wafer bonding or epitaxial liftoff) used in the inverted metamorphic (IMM) approach to make similar tandem stacks. We believe the yield is improved compared to an IMM process. After bi-facial epigrowth, standard III-V cell steps (back metal, photolithography for front grid, cap etch, AR coat, dice) are used in the remainder of the process.

14 SOLAR ENERGY↗

Carbon fiber-nanoparticle composites with electromechanical properties

A carbon fiber composite material comprising: (i) a carbon fiber having an outer surface, a thickness of at least 1 micron, and an aspect ratio of at least 1000; (ii) a sizing agent coated on the outer surface of the carbon fiber, wherein the sizing agent has a thickness of up to 200 nm; and (iii) nanoparticles having a size in at least one dimension of up to 100 nm embedded within the sizing agent, wherein the nanoparticles have a metal carbide, metal oxide, metal nitride, and/or metal boride composition. A method for producing the fiber composite material comprises: (a) continuously feeding and coating a continuous carbon fiber with a liquid containing a solvent, sizing agent, and nanoparticles in a continuous feed-through process to result in said sizing agent and nanoparticles coating the surface of the continuous carbon fiber; and (b) removing the solvent from the coated fiber.

Bowland, Christopher C.↗

Ultrathin Amorphous Titania on Nanowires: Optimization of Conformal Growth and Elucidation of Atomic-Scale Motifs

Due to its chemical stability, titania (TiO 2 ) thin films increasingly have significant impact when applied as passivation layers. However, optimization of growth conditions, key to achieving essential film quality and effectiveness, is challenging in the few-nanometers thickness regime. Furthermore, the atomic-scale structure of the nominally amorphous titania coating layers, particularly when applied to nanostructured supports, is difficult to probe. In this Letter, the quality of titania layers grown on ZnO nanowires is optimized using specific strategies for processing of the nanowire cores prior to titania coating. The best approach, low-pressure O 2 plasma treatment, results in significantly more-uniform titania films and a conformal coating. Characterization using X-ray absorption near edge structure (XANES) reveals the titania layer to be highly amorphous, with features in the Ti spectra significantly different from those observed for bulk TiO 2 polymorphs. Analysis based on first-principles calculations suggests that the titania shell contains a substantial fraction of under-coordinated Ti 4+ ions. The best match to the experimental XANES spectrum is achieved with a “glassy” TiO 2 model that contains ~50% of under-coordinated Ti 4+ ions, in contrast to bulk crystalline TiO 2 that only contains 6-coordinated Ti 4+ ions in octahedral sites.

36 MATERIALS SCIENCE↗

Modeling precursor diffusion and reaction of atomic layer deposition in porous structures

Atomic layer deposition (ALD) is a technique for depositing thin films of materials with a precise thickness control and uniformity using the self-limitation of the underlying reactions. Usually, it is difficult to predict the result of the ALD process for given external parameters, e.g., the precursor exposure time or the size of the precursor molecules. Therefore, a deeper insight into ALD by modeling the process is needed to improve process control and to achieve more economical coatings. In this paper, a detailed, microscopic approach based on the model developed by Yanguas-Gil and Elam is presented and additionally compared with the experiment. Precursor diffusion and second-order reaction kinetics are combined to identify the influence of the porous substrate's microstructural parameters and the influence of precursor properties on the coating. The thickness of the deposited film is calculated for different depths inside the porous structure in relation to the precursor exposure time, the precursor vapor pressure, and other parameters. Good agreement with experimental results was obtained for ALD zirconiumdioxide (ZrO{sub 2}) films using the precursors tetrakis(ethylmethylamido)zirconium and O{sub 2}. The derivation can be adjusted to describe other features of ALD processes, e.g., precursor and reactive site losses, different growth modes, pore size reduction, and surface diffusion.

36 MATERIALS SCIENCE↗

Solderability of AZ31B Magnesium Alloy Coated by Copper and Strength of the Solder Joints

Magnesium alloys are promising as light materials, while their high chemical reactivity makes them difficult to be soldered. In this study, the AZ31B alloy was pretreated by zincification and coated by an electrodeposited Cu layer, and then soldered with Sn-58Bi solder in air furnace. The microstructure and properties of the AZ31B/Cu(Zn)/SnBi solder joints were characterized to evaluate the solderability of the Cu-coated Mg alloy and the influence of soldering on the Cu coating. It was found that the Cu coating is dense, and little defect exists along the Cu(Zn)/AZ31B interface. The soldering process has little negative effect on the bonding between the Cu coating and the AZ31B substrate, and the AZ31B/Cu(Zn)/SnBi solder joints of high metallurgical quality were obtained. Tensile fracture of the solder joint occurs mainly in the solder, with no peeling of the Cu coating. Under shear loading, cracks initiate inside the SnBi solder and the final fracture of the joint occurs around the Cu{sub 6}Sn{sub 5}/solder interface or along the Cu(Zn)/AZ31B interface. The tensile and shear strength of the AZ31B/Cu(Zn)/SnBi solder joints are close to that of the SnBi/Cu solder joints. It is demonstrated that the Cu-coated Mg alloy shows superior solderability and can be soldered by the Sn-based low-melting solder in air.

36 MATERIALS SCIENCE↗

Stress compensation by deposition of a nonuniform corrective coating

Surface deformation by coating stress is compensated by prefiguring the substrate with a radially nonuniform layer of dense silica. Stresses in the compensation layer and reflector are modeled using finite element analysis to determine the optimal thickness profile, with the deposited coating reducing the surface deformation by 90%. As a result, this process is intended to allow implementation of both the compensation layer and the traditional multilayer coating in a single vacuum cycle.

36 MATERIALS SCIENCE↗

A View of Compatible Heat-Resistant Alloy and Coating Systems at High-Temperatures

Conventional and advanced coatings were reviewed, and it was pointed out that the coated Ni-base superalloys decreased their creep rupture life significantly at higher temperatures, and the advanced high strength superalloy became more remarkably. Concept of diffusion barrier coating system (DBC system) and their formation process was introduced, and the results obtained for several heat-resistant alloys, stainless steel (SUS310S), Ni-Mo base alloy (Hastelloy-X), and 4{sup th} generation single crystal superalloy (TMS-138) were given. It was noted that creep-rupture life of the SUS310S and Hastelloy-X with the DBC system became longer than those of the bare alloys with or without conventional {beta}-NiAl coatings. This is due to slow creep-deformation of the Re-base alloy layer as the diffusion barrier. A novel concept based on combination of superalloys and coatings was proposed, by taking both the materials science and corrosion science into consideration.

36 MATERIALS SCIENCE↗

Anisotropic elastic properties of thermal spray coatings determined via resonant ultrasound spectroscopy

The determination of elastic properties of plasma-sprayed ceramic and metallic coatings is difficult due to their complex microstructure, which involves a myriad array of pores, interfaces and other defects. Furthermore, the splat-based build-up of the coating results in transverse anisotropy in the elastic properties. In this paper, we report on the anisotropic elastic properties of these coatings determined by resonant ultrasound spectroscopy (RUS). This approach along with the analysis presented enables, for the first time, the determination of elastic properties as a function of direction and temperature for these complex systems with concomitant implications for design. The coating systems investigated included plasma-sprayed yttria-stabilized zirconia (YSZ) and nickel. An additional nickel coating deposited by high-velocity oxygen-fuel process was investigated and its elastic properties were compared to those of plasma-sprayed nickel. Average Young s moduli of the coatings were independently measured by using the instrumented indentation method. The elastic properties determined from the RUS and indentation methodologies allowed description of the microstructure elastic property relationships in the coatings.

36 MATERIALS SCIENCE↗

MSR Fuel Salt Qualification Methodology

This report documents the continuing activities at Oak Ridge National Laboratory (ORNL) in support of the US Nuclear Regulatory Commission (NRC) efforts to develop an efficient, appropriate process for liquid fuel salt system qualification. Fuel qualification for salt-cooled molten salt reactors (MSRs) is part of the ongoing coated particle fuel qualification effort. Fuel qualification is a process which provides high confidence that physical and chemical behavior of fuel is sufficiently understood so that it can be adequately modeled for both normal and accident conditions, reflecting the role of the fuel design in the overall safety of the facility. Uncertainties are defined so that calculated fission product releases include the appropriate margins to ensure conservative calculation of radiological dose consequences. The initial phase of ORNL’s activities is documented in ORNL/LTR-2018/1045 Molten Salt Reactor Fuel Qualification Considerations and Challenges.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗