Search NASA⌕ Search

SEARCH · Search NASA

Results for “Validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Verification and Validation of Carbon-Fiber Laminate Low Velocity Impact Simulations.

Presented is a model verification and validation effort using low - velocity impact (LVI) of carbon fiber reinforced polymer laminate experiments. A flat cylindrical indenter impacts the laminate with enough energy to produce delamination, matrix cracks and fiber breaks. Included in the experimental efforts are ultrasonic scans of the damage for qualitative validation of the models. However, the primary quantitative metrics of validation are the force time history measured through the instrumented indenter and initial and final velocities. The simulations, whi ch are run on Sandia's Sierra finite element codes , consist of all physics and material parameters of importance as determined by a sensitivity analysis conducted on the LVI simulation. A novel orthotropic damage and failure constitutive model that is cap able of predicting progressive composite damage and failure is described in detail and material properties are measured, estimated from micromechanics or optimized through calibration. A thorough verification and calibration to the accompanying experiment s are presented. Specia l emphasis is given to the four - point bend experiment. For all simulations of interest, the mesh and material behavior is verified through extensive convergence studies. An ensemble of simulations incorporating model parameter unc ertainties is used to predict a response distribution which is then compared to experimental output. The result is a quantifiable confidence in material characterization and model physics when simulating this phenomenon in structures of interest.

English, Shawn Allen↗

Verification and validation plan for the SFR system analysis module

This report documents the Verification and Validation (V&V) Plan for software verification and validation of the SFR System Analysis Module (SAM), developed at Argonne National Laboratory for sodium fast reactor whole-plant transient analysis. SAM is developed under the DOE NEAMS program and is part of the Reactor Product Line toolkit. The SAM code, the phenomena and computational models of interest, the software quality assurance, and the verification and validation requirements and plans are discussed in this report.

97 MATHEMATICS AND COMPUTING↗

OTEC Cold Water Pipe-Platform Subsystem Dynamic Interaction Validation

A commercial floating 100-megawatt (MW) ocean thermal energy conversion (OTEC) power plant will require a cold water pipe (CWP) with a diameter of 10-meter (m) and length of up to 1,000 m. The mass of the cold water pipe, including entrained water, can exceed the mass of the platform supporting it. The offshore industry uses software-modeling tools to develop platform and riser (pipe) designs to survive the offshore environment. These tools are typically validated by scale model tests in facilities able to replicate real at-sea meteorological and ocean (metocean) conditions to provide the understanding and confidence to proceed to final design and full-scale fabrication. However, today’s offshore platforms (similar to and usually larger than those needed for OTEC applications) incorporate risers (or pipes) with diameters well under one meter. Secondly, the preferred construction method for large diameter OTEC CWPs is the use of composite materials, primarily a form of fiber-reinforced plastic (FRP). The use of these material results in relatively low pipe stiffness and large strains compared to steel construction. These factors suggest the need for further validation of offshore industry software tools. The purpose of this project was to validate the ability to model numerically the dynamic interaction between a large cold water-filled fiberglass pipe and a floating OTEC platform excited by metocean weather conditions using measurements from a scale model tested in an ocean basin test facility.

13 HYDRO ENERGY↗

VERA-CS Verification & Validation Plan

This report summarizes the current status of VERA-CS Verification and Validation for PWR Core Follow operation and proposes a multi-phase plan for continuing VERA-CS V&V in FY17 and FY18. The proposed plan recognizes the hierarchical nature of a multi-physics code system such as VERA-CS and the importance of first achieving an acceptable level of V&V on each of the single physics codes before focusing on the V&V of the coupled physics solution. The report summarizes the V&V of each of the single physics codes systems currently used for core follow analysis (ie MPACT, CTF, Multigroup Cross Section Generation, and BISON / Fuel Temperature Tables) and proposes specific actions to achieve a uniformly acceptable level of V&V in FY17. The report also recognizes the ongoing development of other codes important for PWR Core Follow (e.g. TIAMAT, MAMBA3D) and proposes Phase II (FY18) VERA-CS V&V activities in which those codes will also reach an acceptable level of V&V. The report then summarizes the current status of VERA-CS multi-physics V&V for PWR Core Follow and the ongoing PWR Core Follow V&V activities for FY17. An automated procedure and output data format is proposed for standardizing the output for core follow calculations and automatically generating tables and figures for the VERA-CS Latex file. A set of acceptance metrics is also proposed for the evaluation and assessment of core follow results that would be used within the script to automatically flag any results which require further analysis or more detailed explanation prior to being added to the VERA-CS validation base. After the Automation Scripts have been completed and tested using BEAVRS, the VERA-CS plan proposes the Watts Bar cycle depletion cases should be performed with the new cross section library and be included in the first draft of the new VERA-CS manual for release at the end of PoR15. Also, within the constraints imposed by the proprietary nature of plant data, as many as possible of the FY17 AMA Plant Core Follow cases should also be included in the VERA-CS manual at the end of PoR15. After completion of the ongoing development of TIAMAT for fully coupled, full core calculations with VERA-CS / BISON 1.5D, and after the completion of the refactoring of MAMBA3D for CIPS analysis in FY17, selected cases from the VERA-CS validation based should be performed, beginning with the legacy cases of Watts Bar and BEAVRS in PoR16. Finally, as potential Phase III future work some additional considerations are identified for extending the VERA-CS V&V to other reactor types such as the BWR.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Assessment and Validation of Mini-Compact Tension Test Specimen Geometry and Progress in Establishing Technique for Fracture Toughness Master Curves for Reactor Pressure Vessel Steels

Small specimens are playing the key role in evaluating properties of irradiated materials. The use of small specimens provides several advantages. Typically, only a small volume of material can be irradiated in a reactor at desirable conditions in terms of temperature, neutron flux, and neutron dose. A small volume of irradiated material may also allow for easier handling of specimens. Smaller specimens reduce the amount of radioactive material, minimizing personnel exposures and waste disposal. However, use of small specimens imposes a variety of challenges as well. These challenges are associated with proper accounting for size effects and transferability of small specimen data to the real structures of interest. Any fracture toughness specimen that can be made out of the broken halves of standard Charpy specimens may have exceptional utility for evaluation of reactor pressure vessels (RPVs) since it would allow one to determine and monitor directly actual fracture toughness instead of requiring indirect predictions using correlations established with impact data. The Charpy V-notch specimen is the most commonly used specimen geometry in surveillance programs. Assessment and validation of mini-CT specimen geometry has been performed on previously well characterized HSST Plate 13B, an A533B class 1 steel. It was shown that the fracture toughness transition temperature measured by these Mini-CT specimens is within the range of To values that were derived from various large fracture toughness specimens. Moreover, the scatter of the fracture toughness values measured by Mini-CT specimens perfectly follows the Weibull distribution function providing additional proof for validation of this geometry for the Master Curve evaluation of rector pressure vessel steels. Moreover, the International collaborative program has been developed to extend the assessment and validation efforts to irradiated weld metal. The program is underway and involves ORNL, CRIEPI, and EPRI.

36 MATERIALS SCIENCE↗

Hurricane Sandy Economic Impacts Assessment: A Computable General Equilibrium Approach and Validation

Economists use computable general equilibrium (CGE) models to assess how economies react and self-organize after changes in policies, technology, and other exogenous shocks. CGE models are equation-based, empirically calibrated, and inspired by Neoclassical economic theory. The focus of this work was to validate the National Infrastructure Simulation and Analysis Center (NISAC) CGE model and apply it to the problem of assessing the economic impacts of severe events. We used the 2012 Hurricane Sandy event as our validation case. In particular, this work first introduces the model and then describes the validation approach and the empirical data available for studying the event of focus. Shocks to the model are then formalized and applied. Finally, model results and limitations are presented and discussed, pointing out both the model degree of accuracy and the assessed total damage caused by Hurricane Sandy.

97 MATHEMATICS AND COMPUTING↗

1:50 Scale Testing of Three Floating Wind Turbines at MARIN and Numerical Model Validation Against Test Data

The primary goal of the basin model test program discussed herein is to properly scale and accurately capture physical data of the rigid body motions, accelerations and loads for different floating wind turbine platform technologies. The intended use for this data is for performing comparisons with predictions from various aero-hydro-servo-elastic floating wind turbine simulators for calibration and validation. Of particular interest is validating the floating offshore wind turbine simulation capabilities of NREL’s FAST open-source simulation tool. Once the validation process is complete, coupled simulators such as FAST can be used with a much greater degree of confidence in design processes for commercial development of floating offshore wind turbines. The test program subsequently described in this report was performed at MARIN (Maritime Research Institute Netherlands) in Wageningen, the Netherlands. The models considered consisted of the horizontal axis, NREL 5 MW Reference Wind Turbine (Jonkman et al., 2009) with a flexible tower affixed atop three distinct platforms: a tension leg platform (TLP), a spar-buoy modeled after the OC3 Hywind (Jonkman, 2010) and a semi-submersible. The three generic platform designs were intended to cover the spectrum of currently investigated concepts, each based on proven floating offshore structure technology. The models were tested under Froude scale wind and wave loads. The high-quality wind environments, unique to these tests, were realized in the offshore basin via a novel wind machine which exhibits negligible swirl and low turbulence intensity in the flow field. Recorded data from the floating wind turbine models included rotor torque and position, tower top and base forces and moments, mooring line tensions, six-axis platform motions and accelerations at key locations on the nacelle, tower, and platform. A large number of tests were performed ranging from simple free-decay tests to complex operating conditions with irregular sea states and dynamic winds.

17 WIND ENERGY↗

Validation of High-Fidelity Reactor Physics Models for Support of the KJRR Experimental Campaign in the Advanced Test Reactor

The Korea Atomic Energy Research Institute is currently in the process of qualifying a Low-Enriched Uranium fuel element design for the new Ki-Jang Research Reactor (KJRR). As part of this effort, a prototype KJRR fuel element was irradiated for several operating cycles in the Northeast Flux Trap of the Advanced Test Reactor (ATR) at the Idaho National Laboratory. The KJRR fuel element contained a very large quantity of fissile material (618g 235U) in comparison with historical ATR experiment standards (<1g 235U), and its presence in the ATR flux trap was expected to create a neutronic configuration that would be well outside of the approved validation envelope for the reactor physics analysis methods used to support ATR operations. Accordingly it was necessary, prior to high-power irradiation of the KJRR fuel element in the ATR, to conduct an extensive set of new low-power physics measurements with the KJRR fuel element installed in the ATR Critical Facility (ATRC), a companion facility to the ATR that is located in an immediately adjacent building, sharing the same fuel handling and storage canal. The new measurements had the objective of expanding the validation envelope for the computational reactor physics tools used to support ATR operations and safety analysis to include the planned KJRR irradiation in the ATR and similar experiments that are anticipated in the future. The computational and experimental results demonstrated that the neutronic behavior of the KJRR fuel element in the ATRC is well-understood, both in terms of its general effects on core excess reactivity and fission power distributions, its effects on the calibration of the core lobe power measurement system, as well as in terms of its own internal fission rate distribution and total fission power per unit ATRC core power. Taken as a whole, these results have significantly extended the ATR physics validation envelope, thereby enabling an entire new class of irradiation experiments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Validation Assessment of a Glass-to-Metal Seal Finite-Element Model

Sealing glasses are ubiquitous in high pressure and temperature engineering applications, such as hermetic feed-through electrical connectors. A common connector technology are glass-to-metal seals where a metal shell compresses a sealing glass to create a hermetic seal. Though finite-element analysis has been used to understand and design glass-to-metal seals for many years, there has been little validation of these models. An indentation technique was employed to measure the residual stress on the surface of a simple glass-to-metal seal. Recently developed rate- dependent material models of both Schott 8061 and 304L VAR stainless steel have been applied to a finite-element model of the simple glass-to-metal seal. Model predictions of residual stress based on the evolution of material models are shown. These model predictions are compared to measured data. Validity of the finite- element predictions is discussed. It will be shown that the finite-element model of the glass-to-metal seal accurately predicts the mean residual stress in the glass near the glass-to-metal interface and is valid for this quantity of interest.

42 ENGINEERING↗

Initial 1.5D BISON Simulation Verification and Validation CASL FY17 Letter Report

This milestone report describes the current efforts to improve the usability of the recently developed 1.5 dimensional capability in BISON, the initial verification of this BISON capability, and initial validation of the 1.5 dimensional models against existing 2 dimensional axisymmetric full length light water reactor (LWR) fuel rods. The 1.5 dimensional (1.5D) capability in BISON was developed to enable the simulation of LWR fuel rods in a less computationally demanding simulation formulation while retaining key physics of interest. BISON was originally developed to solve 2D axisymmetric and 3D models, and this original development focus allows BISON to examine a wider range of fuel types and geometrically complexity than can be solved with lower dimensional frameworks. As the set of problems which BISON is used to solve expands, the software design requirements continue to evolve. Coupling physics in a higher dimensional geometry is not always required to resolve the physics of interest, such as the modeling of radial heat transfer and radial displacement. BISON, built on the dimension-agnostic MOOSE framework, is able to solve problems in 3D, 2D, and 1D with only minor modifications to the material definition code so that the appropriate geometrical representation can be applied in different problems of interest. The motivation for the development and validation of the BISON 1.5D capability is the CASL program's need for a simplified and computationally efficient version of BISON for use in the large multi-physics VERA simulations which include hundreds of individual fuel rods. The original development of the BISON 1.5D simulation capability is described in the CASL FY17 Letter Report from January 2017, and this report documents the continuing work identified in the previous report. The improvements to the usability of the 1.5D capability through input file simplifications, the results of the verification simulations, the results of the initial validation against the 2D assessment cases in BISON, and the future development needs are included within this report.

1.5D Capability↗

Initial Verification and Validation Assessment for VERA

The Virtual Environment for Reactor Applications (VERA) code suite is assessed in terms of capability and credibility against the Consortium for Advanced Simulation of Light Water Reactors (CASL) Verification and Validation Plan (presented herein) in the context of three selected challenge problems: CRUD-Induced Power Shift (CIPS), Departure from Nucleate Boiling (DNB), and Pellet-Clad Interaction (PCI). Capability refers to evidence of required functionality for capturing phenomena of interest while capability refers to the evidence that provides confidence in the calculated results. For this assessment, each challenge problem defines a set of phenomenological requirements against which the VERA software is assessed. This approach, in turn, enables the focused assessment of only those capabilities relevant to the challenge problem. The evaluation of VERA against the challenge problem requirements represents a capability assessment. The mechanism for assessment is the Sandia-developed Predictive Capability Maturity Model (PCMM) that, for this assessment, evaluates VERA on 8 major criteria: (1) Representation and Geometric Fidelity, (2) Physics and Material Model Fidelity, (3) Software Quality Assurance and Engineering, (4) Code Verification, (5) Solution Verification, (6) Separate Effects Model Validation, (7) Integral Effects Model Validation, and (8) Uncertainty Quantification. For each attribute, a maturity score from zero to three is assigned in the context of each challenge problem. The evaluation of these eight elements constitutes the credibility assessment for VERA.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Updated Verification and Validation Assessment for VERA

The Virtual Environment for Reactor Applications (VERA) code suite is assessed in terms of capability and credibility against the Consortium for Advanced Simulation of Light Water Reactors (CASL) Verification and Validation Plan (presented herein) in the context of three selected challenge problems: CRUD-Induced Power Shift (CIPS), Departure from Nucleate Boiling (DNB), and Pellet-Clad Interaction (PCI). Capability refers to evidence of required functionality for capturing phenomena of interest while credibility refers to the evidence that provides confidence in the calculated results. For this assessment, each challenge problem defines a set of phenomenological requirements against which the VERA software is assessed. This approach, in turn, enables the focused assessment of only those capabilities relevant to the challenge problem. The evaluation of VERA against the challenge problem requirements represents a capability assessment. The mechanism for assessment is the Sandia-developed Predictive Capability Maturity Model (PCMM) that, for this assessment, evaluates VERA on 8 major criteria: (1) Representation and Geometric Fidelity, (2) Physics and Material Model Fidelity, (3) Software Quality Assurance and Engineering, (4) Code Verification, (5) Solution Verification, (6) Separate Effects Model Validation, (7) Integral Effects Model Validation, and (8) Uncertainty Quantification. For each attribute, a maturity score from zero to three is assigned in the context of each challenge problem. The evaluation of these eight elements constitutes the credibility assessment for VERA.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Criticality Safety Validation of SCALE 6.2.2

The computational bias of criticality safety computer codes must be established through the validation of the codes to critical experiments. A large collection of suitable experiments has been vetted by the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and made available in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook). More than 600 cases from this handbook ha ve been prepared and reviewed within the Verified, Archived Library of Inputs and Data (VALID) , which is maintained by the Reactor and Nuclear Systems Division at Oak Ridge National Laboratory. The performance of the KENO V.a and KENO-VI Monte Carlo codes within the SCALE 6.2.2 code system is assessed using the VALID models of benchmark experiments. A range of nuclear cross section libraries based on both ENDF/B-VII.1 and ENDF/B-VII.0 in both multigroup (MG) and continuous energy (CE) formats is considered. The TSUNAMI tools for sensitivity and uncertainty analysis are used to examine some systems further to try to identify potential causes of unexpected results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

EMR Coupling into Systems: Calibration of the Sandia Reverberation Chamber and Validation of the Single Slot Aperture Gain Model

Electromagnetic threats to weapon systems are always specified in terms of an incident plane wave. Sandia strongly prefers to test electromagnetic susceptibility in a reverberation chamber because a reverberant environment does not allow any potential point of entry to be shadowed. At the same time, a reverberation chamber averages out the directive gain of any points of entry. This would result in an under test of the system. Subsequently, a plane wave correction factor is needed to relate the plane wave and reverberation environments. Warne, et al, at Sandia have developed a theoretical correction factor and a previous attempt to validate it using an anechoic chamber (Higgins & Charley, Electromagnetic Radiation (EMR) Coupling into Complex Systems Aperture Coupling into Canonical Cavities in Reverberant and Anechoic Environments and Model Validation (SAND2007-7391), 2007) was not conclusive. In this current work the theoretical factor has been validated by creating the plane wave environment inside a gigahertz transverse electromagnetic (GTEM) cell instead of an anechoic chamber. The correlation is excellent at all but the lowest frequencies tested. The discrepancy in the low frequency regime is understood in terms of limits on the test capabilities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Verification and Validation of the PLTEMP/ANL Code for Thermal-Hydraulic Analysis of Experimental and Test Reactors

This report documents the verification and validation (V&V) of the PLTEMP/ANL Version 4.3 code. A brief description of the code and its history are given in Section 1.1. Section 1.2 provides an overview of PLTEMP/ANL verification and validation work done to date. Section 1.3 lists some publications by other authors on PLTEMP/ANL verification and validation. Section 1.4 describes a UNIX script developed to routinely verify the code after a code modification. The V&V work documented in this report was performed over several years, as code development progressed. In each verification/validation testing discussion, the version of PLTEMP/ANL which was initially used for the V&V work is referenced, but all of the testing presented in this report is applicable to current release version 4.3 of the code.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

ATF material model development and validation for priority fuel concepts

Development, implementation, and validation of material and behavior models for accident tolerant fuel (ATF) concepts in the Bison fuel performance code began in 2014 in response to the events that occurred at the Fukushima Daichii nuclear power plant in March 2011. Early on the focus was on U 3 Si 2 fuel and FeCrAl cladding as part of a high impact problem through the Nuclear Energy and Advanced Modeling Simulation (NEAMS) program. Then, developments for Cr 2 O 3 -doped UO 2 fuel, and SiC-SiC and Cr-coated zirconium-based claddings began based upon industry interests. In late fiscal year 2018 the Consortium for Advanced Simulation of Light Water Reactors (CASL) took over further ATF work in Bison in support of the Nuclear Regulatory Commission (NRC) engagement. Discussions with the NRC identified their list of priority fuel and cladding concepts, which included Cr 2 O 3 -doped UO 2 and U 3 Si 2 fuels, and Cr-coated zirconium-based and FeCrAl claddings. In particular, the NRC suggested that reports similar in form to NUREG/CR-7024 [1] that was developed for traditional LWR materials UO 2 and zirconium-based claddings (i.e., Zircaloy-4, M5®, ZIRLO) be created for the priority ATF concepts. The approach to ATF capability development in Bison since the beginning has been two-fold: (1) empirical correlations and (2) multiscale model development. Both approaches have uncertainty inherent to them. Uncertainty in empirical correlations is bounded by the experimental data upon which with the correlation was developed. Models developed through a multiscale approach have uncertainty associated with the lower length scale calculations and input parameters that must be propagated to the engineering scale model in Bison. In this report, the recommended models, their range of applicability (e.g., temperature, burnup), and associated uncertainty for the NRC priority fuel concepts Cr 2 O 3 -doped UO 2 and U 3 Si 2 are presented in a manner similar to the aforementioned NUREG. In addition, the Cr 2 O 3 -doped UO 2 models are validated to the Halden Reactor tess IFA-677.1 rods 1 and 5 and IFA-716.1 rod 1. For U 3 Si 2 the models are validated to the recent post-irradiation examination (PIE) data ATF-13 and ATF-15 rods that were irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory. Finally, an uncertainty quantification (UQ) and sensitivity analysis (SA) is completed on a single rod for each fuel concept that takes into account the defined uncertainty in select models. The results of the UQ and SA analyses indicate that given the large uncertainty in some of the input ATF models that the uncertainty on the Bison predictions of fuel performance metrics of interest bound the available experimental data. Correlation coefficients are also reported that identified the uncertain inputs with the strongest correlation (positive or negative) with the outputs of interest. Fuel performance metrics investigated include fuel elongation, rod internal pressure, fuel centerline temperature, and fission gas release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Progress Towards A New CTH Code Verification & Validation Test Suite

The CTH multiphysics hydrocode is used in a wide variety of important calculations. An essential part of ensuring hydrocode accuracy and credibility is thorough code verification and validation (V&V). In the past, CTH V&V work (particularly verification) has not been consistently well documented. In FY19, we have made substantial progress towards addressing this need. In this report, we present a new CTH V&V test suite composed of traditional hydrocode verification problems used by similar ASC codes as well as validation problems for some of the most frequently used materials models and capabilities in CTH. For the verification problems, we present not only results and computed errors, but also convergence rates. Validation problems include mesh refinement studies, providing evidence that results are converging.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shortening the Design and Certification Cycle for Additively Manufactured Materials by Improved Mesoscale Simulations and Validation Experiments: Fiscal Year 2019 Status Report.

This report outlines the fiscal year (FY) 2019 status of an ongoing multi-year effort to develop a general, microstructurally-aware, continuum-level model for representing the dynamic response of material with complex microstructures. This work has focused on accurately representing the response of both conventionally wrought processed and additively manufactured (AM) 304L stainless steel (SS) as a test case. Additive manufacturing, or 3D printing, is an emerging technology capable of enabling shortened design and certification cycles for stockpile components through rapid prototyping. However, there is not an understanding of how the complex and unique microstructures of AM materials affect their mechanical response at high strain rates. To achieve our project goal, an upscaling technique was developed to bridge the gap between the microstructural and continuum scales to represent AM microstructures on a Finite Element (FE) mesh. This process involves the simulations of the additive process using the Sandia developed kinetic Monte Carlo (KMC) code SPPARKS. These SPPARKS microstructures are characterized using clustering algorithms from machine learning and used to populate the quadrature points of a FE mesh. Additionally, a spall kinetic model (SKM) was developed to more accurately represent the dynamic failure of AM materials. Validation experiments were performed using both pulsed power machines and projectile launchers. These experiments have provided equation of state (EOS) and flow strength measurements of both wrought and AM 304L SS to above Mbar pressures. In some experiments, multi-point interferometry was used to quantify the variation is observed material response of the AM 304L SS. Analysis of these experiments is ongoing, but preliminary comparisons of our upscaling technique and SKM to experimental data were performed as a validation exercise. Moving forward, this project will advance and further validate our computational framework, using advanced theory and additional high-fidelity experiments.

36 MATERIALS SCIENCE↗