Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mobile computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Clear-Sky Closure Studies of Tropospheric Aerosol and Water Vapor During ACE-2 Using Airborne Sunphotometer, Airborne In-Situ, Space-Borne, and Ground-Based Measurements

We report on clear-sky column closure experiments (CLEARCOLUMN) performed in the Canary Islands during the second Aerosol Characterization Experiment (ACE-2) in June/July 1997. We present CLEARCOLUMN results obtained by combining airborne sunphotometer and in-situ (a differential mobility analyzer, three optical particle counters, three nephelometers, and one absorption photometer) measurements taken aboard the Pelican aircraft, space-borne NOAA/AVHRR data and ground-based lidars. A wide range of aerosol types was encountered throughout the ACE-2 area, including background Atlantic marine, European pollution-derived, and (although less frequently than expected) African mineral dust. During the two days discussed here, vertical profiles flown in cloud free air masses revealed three distinctly different layers: a marine boundary layer (MBL) with varying pollution levels, an elevated dust layer, and a very clean layer between the MBL and the dust layer. Based on size-resolved composition information we have established an aerosol model that allows us to compute optical properties of the ambient aerosol using the optical particle counter results. In the dust, the agreement in layer AOD (lambda=380-1060 nm) is 3-8%. In the MBL there is a tendency for the in-situ results to be slightly lower than the sunphotometer measurements (10-17% at lambda=525 nm), but these differences are within the combined error bars of the measurements and computations. Aerosol size-distribudon closure based on in-situ size distributions and inverted sunphotometer extinction spectra has been achieved in the MBL (total surface area and volume agree within 0.2, and 7%, respectively) but not in the dust layer. The fact that the three nephelometers operated at three different relative humidities (RH) allowed to parameterize hygroscopic growth and to therefore estimate optical properties at ambient RH. The parameters derived for different aerosol types are themselves useful for the aerosol modeling community. The fact that the nephelometers and the absorption photometer sampled the aerosol through a cyclone make those measurements less useful for thee closure study carried out here. Large corrections (especially in the dust) had to be applied. Therefore, it is not surprising that closure with the sunphotometer was not always achieved. Agreement within 0.02 in AOD was achieved in the dust layer when the airorne sunphotometer extinction or AOD was compared to ground-based lidar measurements. We found that the presence of the elevated dust layers removes the good agreement between satellite and sunphotometer AOD usually found in the absence of the dust layer. We still compare the scattering phase functions used in the satellite retrieval with those obtained from the aerosol or the sunphotometer measurements.

Schmid, Beat↗

Emergence of superconductivity in doped multiorbital Hubbard chains

Abstract We introduce a variational state for one-dimensional two-orbital Hubbard models that intuitively explains the recent computational discovery of pairing in these systems when hole doped. Our ansatz is an optimized linear superposition of Affleck–Kennedy–Lieb–Tasaki valence-bond states, rendering the combination a valence-bond liquid dubbed orbital resonant valence bond. We show that the undoped (one-electron/orbital) quantum state of two sites coupled into a global spin singlet is exactly written employing only spin-1/2 singlets linking orbitals at nearest-neighbor sites. Generalizing to longer chains defines our variational state visualized geometrically expressing our chain as a two-leg ladder, with one orbital per leg. As in Anderson’s resonating valence-bond state, our undoped variational state contains preformed singlet pairs that via doping become mobile, leading to superconductivity. Doped real materials with one-dimensional substructures, two near-degenerate orbitals, and intermediate Hubbard U / W strengths— W the carrier’s bandwidth—could realize spin-singlet pairing if on-site anisotropies are small. If these anisotropies are robust, spin-triplet pairing emerges.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Platform for Integrated Land use And Transportation Experiments and Simulation (PILATES) v1.0

PILATES allows for flexibly and at-scale coupling of multiple models to allow for multi-scale and multi-resolution simulation of regional-scale transport networks. In particular, it couples the MATSim-derived transportation modeling framework for Behavior, Energy, Autonomy and Mobility (BEAM) with other models operating at different time scales. Rather than tightly coupling supply and demand models using shared agents and memory within the same software process, PILATES orchestrates different model runs in a containerized framework. This structure requires passing information from the demand models to BEAM in the format of a synthetic population and agent plans, and from BEAM to the demand models in terms or origin/destination tables (also known as "skims"). This allows it to take advantage of the behavioral sophistication of existing activity-based models as well as the reinforcement learning structure of MATSim replanning and adopted by BEAM, in a way that requires minimal changes to existing models. It also takes advantage of the computational performance of BEAM, which allows for simulations with millions of agents to complete in reasonable time as well as allowing for detailed mechanistic simulation of the operation of on-demand modes.

Needell, Zachary↗

Computer simulation of two electrophoretic columns coupled for isoelectric focusing in simple buffers

Computer simulation is used to analyze a system of two electrophoretic columns coupled by mixing the anolyte of one with the catholyte of the other. A mathematical model is presented which is used to predict the pH gradients formed by monovalent buffers in this system, when the currents in the columns are unequal. In the column with the higher current a pH gradient is created which increases from anode to cathode and is potentially useful for isoelectric focusing. The breadth of this gradient is dependent upon the ratio of the currents. The function of the second column is the compensation of buffer migration which occurs in the first column, thereby maintaining constant electrolyte composition. The effects of buffer pKs and mobilities are evaluated.

Tsai, Amos↗

Mobile Thread Task Manager

The Mobile Thread Task Manager (MTTM) is being applied to parallelizing existing flight software to understand the benefits and to develop new techniques and architectural concepts for adapting software to multicore architectures. It allocates and load-balances tasks for a group of threads that migrate across processors to improve cache performance. In order to balance-load across threads, the MTTM augments a basic map-reduce strategy to draw jobs from a global queue. In a multicore processor, memory may be "homed" to the cache of a specific processor and must be accessed from that processor. The MTTB architecture wraps access to data with thread management to move threads to the home processor for that data so that the computation follows the data in an attempt to avoid L2 cache misses. Cache homing is also handled by a memory manager that translates identifiers to processor IDs where the data will be homed (according to rules defined by the user). The user can also specify the number of threads and processors separately, which is important for tuning performance for different patterns of computation and memory access. MTTM efficiently processes tasks in parallel on a multiprocessor computer. It also provides an interface to make it easier to adapt existing software to a multiprocessor environment.

Clement, Bradley J.↗

MPF X-Ray Module Setup for 2018

The Mobile Plutonium Facility (MPF) is a portable module design facility that can be deployed anywhere in the world for the safe recovery, packaging, and shipment of a nations legacy, or excess plutonium stockpile. All of the modules of MPF have specific purposes for operating in a mission if one were to ever come up. For my past four internships here at SRNL I have been working on the support of the X-Ray module for MPF. This year I installed new equipment I had purchased last year for the X-Ray Module and made sure the module was mission ready for the chance that the team deploys in the future for plutonium recovery. Using digital radiography (DR) and computed tomography (CT) provides the MPF team the ability to verify the contents of containers that would be holding material. This also ensures the safety of the team members in the glovebox facilities by verifying that there are no sharps, liquids, or other items that may harm the workers or glovebox operations when working with radioactive material. X-Ray imaging can also pick up low density objects like plastic bags and tape. Note how the DR image hides the puncture in the inner can while the CT image shows the damage. New DR and CT computers with upgraded software, New imaging panel, NOVO Portable X-Ray System. Because of the new upgrades to the X-Ray module system containers can be scanned and evaluated quicker than before. With the last system the 3D model reconstruction alone would take anywhere from 10-12 minutes, now with the new system that time has been brought down to just shy of 1 minute 30 seconds. The new portable system also can 1,2 or 4 images of an object and stitch them together into a mosaic for scanning of larger containers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Efficient and Robust p-Type Transistor Based on Ultrawide-Bandgap Semiconductor

The p-type transistor is an indispensable component of semiconductor technology, enabling a complementary operation with n-channel transistors for computation, storage, and communication. Achieving both high robustness and high efficiency is highly desirable but challenging for p-type transistors due to the limited semiconductors with reliable hole transport and their high activation energies. Here, in this study, we achieved a robust yet efficient p-type transistor by heterogeneously integrating an ultrawide-bandgap semiconductor and a high-κ dielectric layer through van der Waals integration. The p-type transistor employs a two-dimensional hole channel on hydrogenated diamond (bandgap 5.6 eV) combined with a high-κ (30.5) SrTiO 3 perovskite membrane. At room temperature, the transistor exhibits stable operation with a high on-current (∼200 mA/mm), low subthreshold swing (70 mV/dec), high hole mobility (566 cm 2 /(V·s) to 572 cm 2 /(V·s)), and high on–off ratio (∼10 9 ). Furthermore, tuning the annealing temperature allows operation in either enhancement or depletion mode. The robust p-type transistor with high efficiency holds great potential for future power electronics, ultraviolet (UV) optoelectronics, and harsh-environment electronic applications.

high-κ membrane↗

300_underground robot (final research report)

Recent advancements in mobile robotics have displayed impressive capabilities in traversing and accessing areas that are inaccessible to humans either due to the characteristics of the environment or potential hazards. Furthermore, these advancements within the field of mobile robotics, more specifically uncrewed ground vehicles (UGVs), give the ability to potentially survey, observe, and map these inaccessible areas for humans. However, one of the most challenging areas to implement this technology is underground environments. The main challenge with implementing this technology in underground environments is the dependence on either GPS or RF communication for UGVs to navigate properly. Therefore, in order to properly demonstrate the mapping capabilities of the UGV this challenge must be resolved. The overall goal of this study is to demonstrate the mapping capabilities of a UGV while addressing this challenge and documenting the implementation and testing phase of the robot. The proposed solution to this challenge is to implement a SLAM algorithm onto the main computational device of the UGV utilizing the Robot Operating System (ROS). The algorithm is the open-source software package Slam Toolbox developed by Steve Macenski. Furthermore, the sllidar_ros2 package from Slamtec will be used to gather the lidar data from an A3M1 2D lidar. A separate program will be created to gather odometry information for our UGV robot. All of these software packages will run together in a Docker environment. Through working on this project I have developed a better understanding of the world of robotics/autonomous systems, especially with applications such as navigation and mapping. Furthermore, through this project, I have been given exposure to how research is conducted within a DOE lab setting. As robotics/autonomous systems become more advanced it's important to pursue more avenues of research such as this project as it will ensure the development of our capabilities.

42 ENGINEERING↗

Navigation strategies for multiple autonomous mobile robots moving in formation

The problem of deriving navigation strategies for a fleet of autonomous mobile robots moving in formation is considered. Here, each robot is represented by a particle with a spherical effective spatial domain and a specified cone of visibility. The global motion of each robot in the world space is described by the equations of motion of the robot's center of mass. First, methods for formation generation are discussed. Then, simple navigation strategies for robots moving in formation are derived. A sufficient condition for the stability of a desired formation pattern for a fleet of robots each equipped with the navigation strategy based on nearest neighbor tracking is developed. The dynamic behavior of robot fleets consisting of three or more robots moving in formation in a plane is studied by means of computer simulation.

Wang, P. K. C.↗

Three MMIC Amplifiers for the 120-to-200 GHz Frequency Band

Closely following the development reported in the immediately preceding article, three new monolithic microwave integrated circuit (MMIC) amplifiers that would operate in the 120-to-200-GHz frequency band have been designed and are under construction at this writing. The active devices in these amplifiers are InP high-electron-mobility transistors (HEMTs). These amplifiers (see figure) are denoted the LSLNA150, the LSA200, and the LSA185, respectively. Like the amplifiers reported in the immediately preceding article, the LSLNA150 (1) is intended to be a prototype of low-noise amplifiers (LNAs) to be incorporated into spaceborne instruments for sensing cosmic microwave background radiation and (2) has potential for terrestrial use in electronic test equipment, passive millimeter-wave imaging systems, radar receivers, communication receivers, and systems for detecting hidden weapons. The HEMTs in this amplifier were fabricated according to 0.08- m design rules of a commercial product line of InP HEMT MMICs at HRL Laboratories, LLC, with a gate geometry of 2 fingers, each 15 m wide. On the basis of computational simulations, this amplifier is designed to afford at least 15 dB of gain, with a noise figure of no more than about 6 dB, at frequencies from 120 to 160 GHz. The measured results of the amplifier are shown next to the chip photo, with a gain of 16 dB at 150 GHz. Noise figure work is ongoing. The LSA200 and the LSA185 are intended to be prototypes of transmitting power amplifiers for use at frequencies between about 180 and about 200 GHz. These amplifiers have also been fabricated according to rules of the aforesaid commercial product line of InP HEMT MMICs, except that the HEMTs in these amplifiers are characterized by a gate geometry of 4 fingers, each 37 m wide. The measured peak performance of the LSA200 is characterized by a gain of about 1.4 dB at a frequency of 190 GHz; the measured peak performance of the LSA185 is characterized by a gain of about 2.7 dB at a frequency of 181 GHz. The measured gain results of each chip are shown next to their respective photos.

Samoska, Lorene↗

Optimization of collision-free paths in a differential-drive robot by a smoothing piecewise-linear approach

This paper presents a methodology for optimizing pre-calculated collision-free paths of differential-drive wheeled robots. The main advantage of this methodology is that optimization is done by considering the kinematics and mechanical constraints of the mobile robot. In accordance to this proposal, the optimized path is achieved by applying recursively a local smoothing on an initial path which is originally modeled as a one-dimensional piecewise linear function. By this recursive smoothing, it can be ensured that the original piecewise linear function can be transformed into a smooth one that fulfill the constraints established by the kinematic equations of the wheeled mobile in terms of a minimum radius of curvature. As a result of this, a trajectory which guarantees lower power consumption and lower mechanical wear, is obtained. To show the better performance of the proposed approach, numerical simulation results are contrasted to those obtained from other reported methods with regards to path length, minimum radius of curvature, cross track error, continuity and resulting acceleration.

97 MATHEMATICS AND COMPUTING↗

The impact of anisotropic thermal expansion on the isothermal annealing of polycrystalline α -uranium

Although grain growth impacts microstructural evolution in a wide variety of materials systems, the effect of anisotropic thermal expansion on grain boundary mobility and texture evolution has not been widely studied. Anisotropic thermal expansion occurs in multiple non-cubic metals, and the thermomechanical processing behavior of these materials can be better understood with further study into the impact of thermal expansion on grain boundary mobility and texture evolution. In this work, we develop a mesoscale phase field model of grain growth that includes the effect of anisotropic thermal expansion, which is applied to study polycrystalline α-uranium, a highly anisotropic metal. Three-dimensional simulations on polycrystalline a-uranium with and without thermal expansion eigenstrains are performed to study the grain boundary mobility and texture evolution as a function of temperature. A strain-free temperature of 933 K is selected, and the system is studied at within the range of 873 – 933 K at intervals of ten degrees, resulting in increasing thermal eigenstrain with decreasing temperature. We also estimate a grain boundary mobility prefactor and activation energy based on existing experimental data of isothermal annealing of α-uranium. The grain boundary mobility is found to display significant deviation from Arrhenius behavior with the inclusion of thermal expansion eigenstrain as the amount of thermal eigenstrain (and thus elastic strain energy within the system) increases. This result explains an experimentally observed grain boundary mobility deviation from Arrhenius behavior. Furthermore, the texture evolution is affected, such that the grain orientations become less random with increasing thermal eigenstrain, which could explain experimentally observed texture behavior. These results indicate that the effect of thermal expansion should be considered when predicting the thermomechanical processing behavior of α-uranium and other materials with anisotropic thermal expansion.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Cryo-EM structures of engineered active bc 1- cbb 3 type CIII 2 CIV super-complexes and electronic communication between the complexes

Respiratory electron transport complexes are organized as individual entities or combined as large supercomplexes (SC). Gram-negative bacteria deploy a mitochondrial-like cytochrome (cyt) bc 1 (Complex III, CIII 2 ), and may have specific cbb 3 -type cyt c oxidases (Complex IV, CIV) instead of the canonical aa 3 -type CIV. Electron transfer between these complexes is mediated by soluble ( c 2 ) and membrane-anchored ( c y ) cyts. Here, we report the structure of an engineered bc 1 - cbb 3 type SC (CIII 2 CIV, 5.2Å resolution) and three conformers of native CIII 2 (3.3 Å resolution). The SC is active in vivo and in vitro, contains all catalytic subunits and cofactors, and two extra transmembrane helices attributed to cyt c y and the assembly factor CcoH. The cyt c y is integral to SC, its cyt domain is mobile and it conveys electrons to CIV differently than cyt c 2 . The successful production of a native-like functional SC and determination of its structure illustrate the characteristics of membrane-confined and membrane-external respiratory electron transport pathways in Gram-negative bacteria.

42 ENGINEERING↗

A phase-field study of stainless-steel oxidation from high-temperature carbon dioxide exposure

An electrochemical phase-field model has been developed to investigate the oxidation mechanisms of the 21-2N valve stainless steel alloy exposed to carbon dioxide at 973 K. Three oxide phases observed in oxidation experiments are included in the model: Mn 3 O 4 , Cr 2 O 3 , and MnCr 2 O 4 . Local charge neutrality and the conserved current condition are assumed to include the impact of the electric potential on oxidation, though it is found to be negligible when the system is electrically isolated. The sensitivity of the oxidation processes to the values of the diffusion mobilities is examined, and the oxidation rate is calibrated against experimental data by modifying the sensitive mobilities. We find that both inward oxygen and outward metal diffusion are important for oxidation. Furthermore, by investigating the impact of the order of the initial oxide layers, we find that Cr 2 O 3 serves as a barrier to outward Mn diffusion. Moreover, controlling the initial oxide layer order can be used to limit oxidation.

36 MATERIALS SCIENCE↗

A DNA-Inspired Encryption Methodology for Secure, Mobile Ad Hoc Networks

Users are pushing for greater physical mobility with their network and Internet access. Mobile ad hoc networks (MANET) can provide an efficient mobile network architecture, but security is a key concern. A figure summarizes differences in the state of network security for MANET and fixed networks. MANETs require the ability to distinguish trusted peers, and tolerate the ingress/egress of nodes on an unscheduled basis. Because the networks by their very nature are mobile and self-organizing, use of a Public Key Infra structure (PKI), X.509 certificates, RSA, and nonce ex changes becomes problematic if the ideal of MANET is to be achieved. Molecular biology models such as DNA evolution can provide a basis for a proprietary security architecture that achieves high degrees of diffusion and confusion, and resistance to cryptanalysis. A proprietary encryption mechanism was developed that uses the principles of DNA replication and steganography (hidden word cryptography) for confidentiality and authentication. The foundation of the approach includes organization of coded words and messages using base pairs organized into genes, an expandable genome consisting of DNA-based chromosome keys, and a DNA-based message encoding, replication, and evolution and fitness. In evolutionary computing, a fitness algorithm determines whether candidate solutions, in this case encrypted messages, are sufficiently encrypted to be transmitted. The technology provides a mechanism for confidential electronic traffic over a MANET without a PKI for authenticating users.

Shaw, Harry↗

Measurements of the electron energy distribution function in partially magnetized low temperature plasmas

While Langmuir probes (LPs) are relatively simple and inexpensive plasma diagnostics for the electron density, temperature, and the electron energy distribution function (EEDF), the interpretation of the measured current–voltage (I–V) characteristic is complicated considerably by the presence of a magnetic field. In regimes where the electron gyroradius is comparable to the probe radius, the electron flux to the probe surface is retarded by reduced mobility across field lines and can no longer be described by a thermal model. Predicting the current collected by the probe in these regimes requires accurate estimates of the plasma diffusion coefficients, which are usually difficult to obtain. In this work, we measure electron energy distribution functions in E×B plasmas with magnetized electrons and non-magnetized ions in argon and krypton gases, using both a LP and laser Thomson scattering (LTS) at various magnetic fields. Using the LTS measurements to provide a robust benchmark for comparison, we compare existing theories describing the flux to the probe under magnetized conditions. We find that even when the electron gyroradius associated with the effective electron temperature is small compared to the probe radius, the EEDF computed using classical probe theory is still robust at energies higher than the energy at which the gyroradius becomes larger than the probe size. For plasmas that are not strongly non-Maxwellian, we formulate a method to extract robust density and temperature measurements using physics-informed fitting techniques to analyze EEDFs computed using classical theory.

Devin, E. G. [Princeton Plasma Physics Laboratory ↗

Mobility Selective Ion Soft-Landing and Characterization Enabled Using Structures for Lossless Ion Manipulation

In this study, while conventional ion-soft landing uses the mass-to-charge (m/z) ratio to achieve molecular selection for deposition, here we demonstrate the use of Structures for Lossless Ion Manipulation (SLIM) for mobility-based ion selection and deposition. The dynamic rerouting capabilities of SLIM were leveraged to enable the rerouting of a selected range of mobilities to a different SLIM path (rather than MS) that terminated at a deposition surface. A selected mobility range from a phosphazene ion mixture was rerouted and deposited with a current pulse (~150 pA) resembling its mobility peak. In addition, from a mixture of tetra-alkyl ammonium (TAA) ions containing chain lengths of C5–C8, selected chains (C6, C7) were collected on a surface, reconstituted into solution-phase, and subsequently analyzed with a SLIM-qToF to obtain an IMS/MS spectrum, confirming the identity of the selected species. Further, this method was used to characterize triply charged tungsten-polyoxometalate anions, PW 12 O 40 3– (WPOM). The arrival time distribution of the IMS/MS showed multiple peaks associated with the triply charged anion (PW 12 O 40 3– ), of which a selected ATD was deposited and imaged using TEM. Additionally, the identity of the deposited WPOM was ascertained using energy-dispersive (EDS) spectroscopy. Further, we present theory and computations that reveal ion landing energies, the ability to modulate the energies, and deposition spot sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fractonic coset construction for spontaneously broken translations

We study the homogeneous breaking of spatial translation symmetry concomitantly with the spontaneous breaking of other internal and spacetime symmetries, including dilations. We use the symmetry-breaking pattern as the only input to derive, via the coset construction, general effective field theories for the symmetry-originated modes associated with Goldstone’s theorem, namely the Nambu-Goldstone candidates. Through explicit computations, we show that integrating out the explicit massive Nambu-Goldstone candidates or imposing symmetric constraints, namely the inverse Higgs constraints, to express massive modes in terms of the massless ones leads to physically distinct effective field theories. This sensitivity to the chosen method can be traced back to the homogeneous breaking of translations, the homogeneous aspect of the breaking induces a mixing between internal and spacetime symmetries at the level of the Lie algebra. This, in turn, leads to subtle discussions about the inverse Higgs constraints, in particular that they lead to a loss of generality in our specific examples. The derived general effective field theories also give rise to a broad class of theories exhibiting emergent enhanced shift symmetries, which constrain the mobility of the modes. The latter are referred to as fractonic modes. Published by the American Physical Society 2025

Chavda, Ameya (ORCID:0000000211731605)↗