Search NASA⌕ Search

SEARCH · Search NASA

Results for “charge yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Measurement of Stark-split beam and carbon charge exchange emissions for simultaneous B-field and temperature/rotation analysis at DIII-D

A set of two newly designed, single-channel Czerny–Turner spectrometers has been deployed at the DIII-D tokamak for measurements of the motional Stark effect (MSE) split beam emission and the C6+ (CVI) carbon charge exchange recombination (CER) emission at high spectral (δλ = 0.13 nm) and temporal (1–5 kHz) resolution. High throughput optics (f/# = 2.8) allow for good signal-to-noise at high time resolution using fast EMCCD detectors. The MSE emission allows for spectral fitting of the magnitude and direction of the local B-field, while the carbon emission yields local ion temperature and toroidal rotation information. To reduce so-called Doppler broadening of the MSE emission, a new channel-specific variable lens-masking approach has been developed. Experimental data collected from the 2023 DIII-D experimental campaign demonstrate the signal quality and instrument fidelity for both diagnostic measurements. Moreover, initial CER data analysis shows a clear evolution of the toroidal rotation during edge localized modes. Initial progress on the advanced MSE model, including a new validated ray-trace model of the DIII-D collection optics, is shown via sensitivity analysis.

Instruments & Instrumentation↗
DOE OSTI2020

Compositional phase stability of correlated electron materials within DFT+DMFT

Predicting the compositional phase stability of strongly correlated electron materials is an outstanding challenge in condensed matter physics, requiring precise computations of total energies. In this work, we employ the density functional theory plus dynamical mean-field theory (DFT+DMFT) formalism to address local correlations due to transition metal $\textit{d}$ electrons on compositional phase stability in the prototype rechargeable battery cathode material Li x CoO 2 , and detailed comparisons are made with the simpler DFT+$\textit{U}$ approach (i.e., the Hartree-Fock solution of the DMFT impurity problem). Local interactions are found to strongly impact the energetics of the band insulator LiCoO 2 , most significantly via the $E_g$ orbitals, which are partially occupied via hybridization with $\textit{O p}$ states. We find CoO 2 and Li 1/2 CoO 2 to be moderately correlated Fermi liquids with quasiparticle weights of 0.6–0.8 for the $T_{2g}$ states, which are most impacted by the interactions. Further, as compared to DFT+$\textit{U}$, DFT+DMFT considerably dampens the increase in total energy as $\textit{U}$ is increased, which indicates that dynamical correlations are important to describe this class of materials despite the relatively modest quasiparticle weights. Unlike DFT+$\textit{U}$, which can incorrectly drive Li x CoO 2 toward spurious phase separating or charge-ordered states, DFT+DMFT correctly captures the system's phase stability and does not exhibit a strong charge-ordering tendency. Most importantly, the error within DFT+$\textit{U}$ varies strongly as the composition changes, challenging the common practice of artificially tuning $\textit{U}$ within DFT+$\textit{U}$ to compensate the errors of Hartree-Fock. DFT+DMFT predicts the average intercalation voltage decreases relative to DFT, opposite to the result of DFT+$\textit{U}$, which would yield favorable agreement with experiment in conjunction with the overprediction of the voltage by the strongly constrained and appropriately normed DFT functional.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Measurement of e + e - Momentum and Angular Distributions from Linearly Polarized Photon Collisions

The Breit-Wheeler process which produces matter and antimatter from photon collisions is experimentally investigated through the observation of 6085 exclusive electron-positron pairs in ultraperipheral Au + Au collisions at $\sqrt{s_{NN}}$ = 200 GeV. The measurements reveal a large fourth-order angular modulation of cos 4Δ$\phi$ = (16.8 ± 2.5)% and smooth invariant mass distribution absent of vector mesons ($\phi$, ω, and ρ) at the experimental limit of ≤ 0.2% of the observed yields. The differential cross section as a function of e + e - pair transverse momentum P ⟂ peaks at low value with $\sqrt\langle$$P2\atop{⟂}$$\rangle$ = 38.1 ± 0.9 MeV and displays a significant centrality dependence. These features are consistent with QED calculations for the collision of linearly polarized photons quantized from the extremely strong electromagnetic fields generated by the highly charged Au nuclei at ultrarelativistic speed. The experimental results have implications for vacuum birefringence and for mapping the magnetic field which is important for emergent QCD phenomena.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

The Jefferson Lab Eta Factory Experiment and Applications of PbWO4 Calorimeters in Future Experimental Facilities

The goal of the new JLab Eta Factory (JEF) experiment, conducted with the GlueX detector in Hall D at Jefferson Lab, is to perform measurements of various ¿(') decays with a primary focus on rare neutral modes. The experiment’s physics program ranges from precision tests of low-energy QCD to searches for gauge bosons with masses below 1 GeV that could couple the Standard Model (SM) sector to the dark sector. The experiment will collect a high-statistics data sample of ¿(') mesons produced via a beam of tagged photons. The GlueX detector features a large, nearly uniform acceptance for both neutral and charged particles, enabling efficient identification of complex multi-particle final states. To meet the requirements of the JEF experiment, the inner section of the forward lead-glass calorimeter in the GlueX detector has been upgraded with lead tungstate (PbWO4) scintillating crystals. PbWO4 offers exceptional characteristics, such as a small radiation length and Molire radius, and large light yield, that make it ideal for constructing high- granularity, high-resolution, radiation-hard detectors. These properties enable excellent spatial separation and energy resolution of reconstructed electromagnetic showers, establishing PbWO4 as the material of choice for many high-precision experiments. The JEF experiment began data collection in April 2025 and will operate concurrently with the GlueX experiment, whose primary objective is the search for gluonic excitations in the meson spectrum. I will give an overview of the JEF experiment, the GlueX detector, and the feasibility of further upgrades to support future ¿ physics studies. Special attention will be given to the newly constructed PbWO4 scintillating calorimeter and recent advancements in calorimeter instrumentation.

Somov, Alexander↗
DOE OSTI2026

Transverse Kinematic Imbalance in MicroBooNE's New nue CC0pi Measurements

Neutrino-nucleus cross section measurements require accurate modelling of neutrino interactions. Neutrino beams are not monoenergetic, and the energy of each interaction must instead be modelled using nuclear interaction assumptions. This introduces significant systematic uncertainty into cross section measurements. Effects such as Fermi motion, nuclear correlations, and final-state interactions (FSI) smear the underlying quasi-elastic scattering signal, making it difficult to disentangle genuine quasi-elastic kinematics from nuclear effects across the full range of interaction channels (QE, MEC, RES, DIS) probed in these measurements. Transverse Kinematic Imbalance (TKI) variables, such as $\delta p_T$ and $\delta \alpha_T$, probe this same phase space by exploiting the fact that the incoming neutrino has zero transverse momentum ($\vec{p}_T^{\,\nu} = 0$). Any measured transverse imbalance in the final state therefore arises from nuclear effects rather than from uncertainty in the incident neutrino energy, allowing cross section measurements to select a phase space that is rich in quasi-elastic-like events with minimal contamination from FSI and other nuclear effects, independent of energy reconstruction. Recent unfolded MicroBooNE cross section measurements of electron-neutrino charged-current interactions with zero pions and at least one proton ($\nu_e$ CC0$\pi$, 1eNp0$\pi$) show that several leading nuclear interaction generators (including GENIE variants, NuWro, GiBUU, and NEUT) reproduce the differential cross section in electron energy reasonably well, but consistently struggle to describe the differential cross section in the cosine of the leading proton's angle, yielding lower $p$-values across all seven generators tested. This tension points to a more fundamental, kinematics-driven disagreement between data and generators that is not visible in energy-only cross section observables. This is precisely the regime TKI variables are designed to probe. Following previous TKI cross section measurements with muon-neutrino data in MicroBooNE, this poster presents the case for extending the TKI framework to electron-neutrino cross section measurements as a next step to isolate and characterize the source of the observed generator tension in proton kinematics.

Burridge, Jessica [U. Manchester (main)] (ORCID:00↗
NASA NTRS1973

Measurement of the lunar photoelectron layer in the geomagnetic tail

Stable photoelectron fluxes (with energies between 40 and 200 eV) were observed by the Apollo 15 Charged Particle Lunar Environment Experiment (CPLEE). These observations, made in the magnetotail under near vacuum conditions, are compared with numerically calculated photoemission spectra to determine the approximate potential difference between ground and CPLEE'S apertures (a distance of 26 cm). Numerically calculated density and potential distributions are compared with the measured values to provide an estimate of the photoelectron yield function of the dust layer covering the moon.

Reasoner, D. L.↗
NASA NTRS2007

High Efficiency Plastic Scintillator Detector with Wave-Length Shifting Fiber Readout for the GLAST Large Area Telescope

This paper describes the design and performance studies of the scintillator tile detectors for the Anti-Coincidence Detector (ACD) of the Large Area Telescope (LAT) on the Gamma ray Large Area Space Telescope (GLAST), scheduled for launch in early 2008. The scintillator tile detectors utilize wavelength shifting fibers and have dual photomultiplier tube (PMT) readout. The design requires highly efficient and uniform detection of singly charged relativistic particles over the tile area and must meet all requirements for a launch, as well as operation in a space environment. We present here the design of three basic types of tiles used in the ACD, ranging in size from approx.450 sq cm to approx.2500 sq cm, all 1 cm thick, with different shapes, and with photoelectron yield of approx. 20 photoelectrons per minimum ionizing particle (mip) at normal tile incidence, uniform over the tile area. Some tiles require flexible clear fiber cables up to 1.5 m long to deliver scintillator light to remotely located PMT.

Moiseev, A. A.↗
NASA NTRS2011

A Theoretical Investigation of the Plausibility of Reactions Between Ammonia and Carbonyl Species (Formaldehyde, Acetaldehyde, and Acetone) in Interstellar Ice Analogs at Ultracold Temperatures

We have reexamined the reaction between formaldehyde and ammonia, which was previously studied by us and other workers in modestly sized cluster calculations. Larger model systems with up to 12H2O were employed, and reactions of two more carbonyl species, acetaldehyde and acetone, were also carried out. Calculations were performed at the B3LYP/6-31+G** level with bulk solvent effects treated with a polarizable continuum model; limited MP2/6-31+G** calculations were also performed. We found that while the barrier for the concerted proton relay mechanism described in previous work remains modest, it is still prohibitively high for the reaction to occur under the ultracold conditions that prevail in dense interstellar clouds. However, a new pathway emerged in more realistic clusters that involves at least one barrierless step for two of the carbonyl species considered here: ammonia reacts with formaldehyde and acetaldehyde to form a partial charge transfer species in small clusters (4H2O) and a protonated hydroxyamino intermediate species in large clusters (9H2O, 12H2O); modest barriers that decrease sharply with cluster size are found for the analogous processes for the acetone-NH3 reaction. Furthermore, if a second ammonia replaces one of the water molecules in calculations in the 9H2O clusters, deprotonation can occur to yield the same neutral hydroxyamino species that is formed via the original concerted proton relay mechanism. In at least one position, deprotonation is barrierless when zero-point energy is included. In addition to describing the structures and energetics of the reactions between formaldehyde, acetaldehyde, and acetone with ammonia, we report spectroscopic predictions of the observable vibrational features that are expected to be present in ice mixtures of different composition.

Chen, Lina↗
NASA NTRS2016

Degradation of Leakage Currents and Reliability Prediction for Tantalum Capacitors

Two types of failures in solid tantalum capacitors, catastrophic and parametric, and their mechanisms are described. Analysis of voltage and temperature reliability acceleration factors reported in literature shows a wide spread of results and requires more investigation. In this work, leakage currents in two types of chip tantalum capacitors were monitored during highly accelerated life testing (HALT) at different temperatures and voltages. Distributions of degradation rates were approximated using a general log-linear Weibull model and yielded voltage acceleration constants B = 9.8 +/- 0.5 and 5.5. The activation energies were Ea = 1.65 eV and 1.42 eV. The model allows for conservative estimations of times to failure and was validated by long-term life test data. Parametric degradation and failures are reversible and can be annealed at high temperatures. The process is attributed to migration of charged oxygen vacancies that reduce the barrier height at the MnO2/Ta2O5 interface and increase injection of electrons from the MnO2 cathode. Analysis showed that the activation energy of the vacancies' migration is ~ 1.1 eV.

acceleration factors↗
DOE OSTI2026

Elucidating the Structural and Electronic Effects of Ni and Mn Cationic Incorporation on CoOOH for Efficient Benzyl Alcohol Electrooxidation

Transition-metal oxyhydroxides such as CoOOH are promising low-cost electrocatalysts for the selective electrooxidation of organic molecules, yet the influence of ubiquitous transition-metal impurities on their performance and durability remains poorly understood. Here, we experimentally probed the individual and synergistic electrochemical and structural effects of Ni and Mn incorporations into model CoOOH electrocatalysts toward an efficient benzyl alcohol oxidation reaction (BAOR). Comprehensive electrochemical, microscopic, and spectroscopic analyses reveal that Ni incorporation enhances charge-transfer kinetics and overall activity through the formation of catalytically active Ni 3+ sites, whereas Mn exhibited a more complex but interesting role. At the early stages of operation, Mn 4+ acts as a stabilizing surface layer that mitigates catalyst degradation but partially blocks Co sites before they undergo gradual leaching. The concurrent incorporation of both Ni and Mn yields a trimetallic 2NMC@NF electrocatalyst that integrates the activity benefits of Ni with the stability conferred by Mn, achieving 92.9% benzyl alcohol conversion and 91.4% Faradaic efficiency after 24 h at 1.5 V vs RHE. These findings elucidate how trace Ni and Mn impurities, often introduced from electrolytes or external sources, can modulate the lattice and electronic structure of CoOOH, offering a design strategy for enhancing both activity and long-term stability in electrocatalytic organic oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Rheology improvement for silicon nitride and resin slurries for vat photopolymerization printing and sintering

This work presents the formulation, rheological characterization, and sintering of silicon nitride (Si₃N₄) slurries for vat photopolymerization (VPP) using digital light processing (DLP). Bimodal Si₃N₄ powder was dispersed into commercial photopolymer resin using two different dispersants with opposing effects on surface charge, resulting in varied slurry stability and flow behavior. Slurries were engineered to exhibit shear-thinning behavior suitable for VPP, and their flow properties were quantified using a power-law fluid model. The formulations achieved cure depths of approximately 40 µm and enabled printing of green bodies. Post-processing included thermal debinding and liquid-phase sintering, yielding primarily β-Si₃N₄ with a minor Y-Si-Al-O-N glass phase. The sintered parts reached ~85% of theoretical density and demonstrated a flexural strength of ~330 MPa. Microstructural analysis revealed closed porosity along with some defects related to powder agglomeration and interlayer adhesion. These findings provide insights into slurry formulation strategies for additive manufacturing of high-performance non-oxide ceramics.

Aerospace engineering↗
DOE OSTI2023

Neutron detection and application with a novel 3D-projection scintillator tracker in the future long-baseline neutrino oscillation experiments

Neutrino oscillation experiments require a precise measurement of the neutrino energy. However, the kinematic detection of the final-state neutron in the neutrino interaction is missing in current neutrino oscillation experiments. The missing neutron kinematic detection results in a smaller detected neutrino energy than the true neutrino energy. A novel 3D-projection scintillator tracker, which consists of roughly ten million active cubes covered with an optical reflector, is capable of measuring the neutron kinetic energy and direction on an event-by-event basis using the time-of-flight technique thanks to the fast timing, fine granularity, and high light yield. The $\overline{v}$ μ interactions tend to produce neutrons in the final state. By measuring the neutron kinetic energy, the $\overline{v}$ μ energy can be reconstructed better, allowing a tighter incoming neutrino flux constraint. This article shows the detector's ability to reconstruct neutron kinetic energy and the $\overline{v}$ μ flux constraint achieved by selecting the charged-current interactions without mesons or protons in the final state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1998

Fullerene Machines

Recent computational efforts at NASA Ames Research Center and computation and experiment elsewhere suggest that a nanotechnology of machine phase functionalized fullerenes may be synthetically accessible and of great interest. We have computationally demonstrated that molecular gears fashioned from (14,0) single-walled carbon nanotubes and benzyne teeth should operate well at 50-100 gigahertz. Preliminary results suggest that these gears can be cooled by a helium atmosphere and a laser motor can power fullerene gears if a positive and negative charge have been added to form a dipole. In addition, we have unproven concepts based on experimental and computational evidence for support structures, computer control, a system architecture, a variety of components, and manufacture. Combining fullerene machines with the remarkable mechanical properties of carbon nanotubes, there is some reason to believe that a focused effort to develop fullerene nanotechnology could yield materials with tremendous properties.

Globus, Al↗
DOE OSTI2026

Colloidal Synthesis of Palladium Nanocluster‐Decorated Cs 3 Sb 2 Cl 9 Perovskite Heterostructural Nanorods for Enhanced CO 2 Photoreduction

Developing efficient and sustainable photocatalysts for CO 2 reduction remains a significant challenge, particularly with environmentally benign materials. Here, in this study, we report the first one-step synthesis of metal–lead-free perovskite heterostructural nanocrystals by decorating Cs 3 Sb 2 Cl 9 perovskite nanorods with size-controlled Pd nanoclusters via a one-step hot-injection method. The resulting Pd-Cs 3 Sb 2 Cl 9 heteronanorods (HNRs) exhibit strong interfacial electronic coupling, enhanced charge separation, and excellent colloidal stability. Transient absorption spectroscopy and DFT calculations reveal a built-in electric field that drives directional electron transfer from the perovskite host to the Pd domains. Under UV irradiation, the Pd-Cs 3 Sb 2 Cl 9 HNRs demonstrate excellent CO 2 photoreduction activity with high CH 4 selectivity, achieving a record apparent quantum yield (AQY) of 2.62% among halide perovskite nanocrystal-based systems with a large electronic yield of 689.3 ± 12.2 µmol·g cat −1 . In situ spectroscopic monitoring and Gibbs free energy analysis further unveil a Pd-facilitated reaction pathway involving stabilization of key intermediates. This work introduces a new class of lead-free perovskite-based heterostructures through a facile one-step synthesis strategy and offers a new design principle for next-generation photocatalysts for solar fuel production.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Fast Exciton Diffusion in Monolayer PtSe2

Recently, 2D noble metal dichalcogenides have drawn considerable attention due to their thickness-tunable electronic and optical properties. However, the dynamical properties of photocarriers in these materials are less studied. In this report photocarrier dynamics in monolayer and bilayer PtSe 2 samples prepared by chemical vapor deposition are studied by transient absorption microscopy. Spatially and temporally resolved differential reflectance measurements yield room-temperature exciton lifetimes of 25 and 50 ps for monolayer and bilayer samples, respectively. The exciton diffusion coefficient in monolayer PtSe 2 is found to be as large as 48 cm 2 s -1 . This value is higher than exciton diffusion coefficients of most known monolayer semiconductors. The deduced exciton mobility is close to the theoretical limit of charge carrier mobility of monolayer PtSe 2 . The superior exciton transport property is unique to monolayers, as the exciton diffusion coefficient drops to 6.7 cm 2 s -1 in bilayers PtSe 2 . The novel exciton transport properties, along with its high air stability, make monolayer PtSe 2 an attractive material for ultrathin excitonic devices. These results provide insights on the exciton dynamic properties of 2D PtSe 2 and help develop fundamental understanding on the performance of various optoelectronic devices based on 2D PtSe 2 . .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Tritium embrittlement of austenitic stainless-steel tubing at low helium contents

Austenitic stainless steels are the standard materials for containment of hydrogen and tritium because of their resistance to mechanical property degradation in those environments. The mechanical performance of the primary containment material is critical for tritium handling, processing, and storage, thus comprehensive understanding of the processes of tritium embrittlement is an enabling capability for fusion energy. This work describes the investigation of the effects of low levels of tritium-decay-helium ingrowth on 304 L tubes. Long-term aging with tritium leads to high helium contents in austenitic stainless steels and can reduce fracture toughness by 95 %, but the details of behavior at low helium contents are not as well characterized. Here, we present results from tensile testing of tritium pre-charged 304 L tube specimens with a variety of starting microstructures that all contain a low level of helium. The results of the tritium exposed-and-aged materials are compared to previously reported results on similar specimens tested in an unexposed condition as well as the hydrogen precharged condition. Tritium precharging and aging for a short duration resulted in increased yield strengths, ultimate tensile strengths and slightly increased elongation to failure, comparable to higher concentrations of hydrogen precharging.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Universal machine learning framework for defect predictions in zinc blende semiconductors

Our article introduces a universal predictive framework for point defect formation energies and charge transition levels in a wide chemical space of zinc blende semiconductors and possible impurity atoms selected from across the periodic table. This framework was developed by leveraging high-throughput quantum mechanical simulations benchmarked using some experimental data from the literature, as well as machine learning (ML)-based regressions techniques that map unique materials descriptors to computed defect properties and yield optimized and generalizable models. Furthermore, the power and utility of these models is revealed through quick predictions for thousands of new defects and screening of low-energy impurities, which may tune the equilibrium conductivity in the semiconductor. This work presents, to our knowledge, the largest density functional theory (DFT) dataset of defect properties in semiconductors and the largest DFT+ML-based screening of point defects in semiconductors to date.

36 MATERIALS SCIENCE↗
DOE OSTI2020

State preparation and measurement in a quantum simulation of the $O(\mathrm{3})$ sigma model

Recently, Singh and Chandrasekharan [Phys. Rev. D 100, 054505 (2019)] showed that fixed points of the nonlinear O ( 3 ) sigma model can be reproduced near a quantum phase transition of a spin model with just two qubits per lattice site. In a paper by the NuQS Collaboration [Phys. Rev. Lett. 123, 090501 (2019)], the proposal is made to simulate such field theories on a quantum computer using the universal properties of a similar model. In this paper, following that direction, we demonstrate how to prepare the ground state of the model from Singh and Chandrasekharan and measure a dynamical quantity of interest, the O ( 3 ) Noether charge, on a quantum computer. In particular, we apply Trotter methods to obtain results for the complexity of adiabatic ground state preparation in both the weak-coupling and quantum-critical regimes and use shadow tomography to measure the dynamics of local observables. Finally, we then present and analyze a quantum algorithm based on nonunitary randomized simulation methods that may yield an approach suitable for intermediate-term noisy quantum devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗