Search NASA⌕ Search

SEARCH · Search NASA

Results for “process influence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Variations in Modeled Dengue Transmission over Puerto Rico Using a Climate Driven Dynamic Model

Dengue fever is a mosquito‐borne viral disease reemerging throughout much of the tropical Americas. Dengue virus transmission is explicitly influenced by climate and the environment through its primary vector, Aedes aegypti. Temperature regulates Ae. aegypti development, survival, and replication rates as well as the incubation period of the virus within the mosquito. Precipitation provides water for many of the preferred breeding habitats of the mosquito, including buckets, old tires, and other places water can collect. Because of variations in topography, ocean influences and atmospheric processes, temperature and rainfall patterns vary across Puerto Rico and so do dengue virus transmission rates. Using NASA's TRMM (Tropical Rainfall Measuring Mission) satellite for precipitation input, ground‐based observations for temperature input, and laboratory confirmed dengue cases reported by the Centers for Disease Control and Prevention for parameter calibration, we modeled dengue transmission at the county level across Puerto Rico from 2010‐2013 using a dynamic dengue transmission model that includes interacting vector ecology and epidemiological components. Employing a Monte Carlo approach, we performed ensembles of several thousands of model simulations for each county in order to resolve the model uncertainty arising from using different combinations of parameter values that are not well known. The top 1% of model simulations that best reproduced the reported dengue case data were then analyzed to determine the most important parameters for dengue virus transmission in each county, as well as the relative influence of climate variability on transmission. These results can be used by public health workers to implement dengue control methods that are targeted for specific locations and climate conditions.

Morin, Cory↗

High-Resolution Model Intercomparison Project phase 2 (HighResMIP2) towards CMIP7

Abstract. Robust projections and predictions of climate variability and change, particularly at regional scales, rely on the driving processes being represented with fidelity in model simulations. Consequently, the role of enhanced horizontal resolution in improved process representation in all components of the climate system continues to be of great interest. Recent simulations suggest the possibility of significant changes in both large-scale aspects of the ocean and atmospheric circulations and in the regional responses to climate change, as well as improvements in representations of small-scale processes and extremes, when resolution is enhanced. The first phase of the High-Resolution Model Intercomparison Project (HighResMIP1) was successful at producing a baseline multi-model assessment of global simulations with model grid spacings of 25–50 km in the atmosphere and 10–25 km in the ocean, a significant increase when compared to models with standard resolutions on the order of 1° that are typically used as part of the Coupled Model Intercomparison Project (CMIP) experiments. In addition to over 250 peer-reviewed manuscripts using the published HighResMIP1 datasets, the results were widely cited in the Intergovernmental Panel on Climate Change report and were the basis of a variety of derived datasets, including tracked cyclones (both tropical and extratropical), river discharge, storm surge, and impact studies. There were also suggestions from the few ocean eddy-rich coupled simulations that aspects of climate variability and change might be significantly influenced by improved process representation in such models. The compromises that HighResMIP1 made should now be revisited, given the recent major advances in modelling and computing resources. Aspects that will be reconsidered include experimental design and simulation length, complexity, and resolution. In addition, larger ensemble sizes and a wider range of future scenarios would enhance the applicability of HighResMIP. Therefore, we propose the High-Resolution Model Intercomparison Project phase 2 (HighResMIP2) to improve and extend the previous work, to address new science questions, and to further advance our understanding of the role of horizontal resolution (and hence process representation) in state-of-the-art climate simulations. With further increases in high-performance computing resources and modelling advances, along with the ability to take full advantage of these computational resources, an enhanced investigation of the drivers and consequences of variability and change in both large- and synoptic-scale weather and climate is now possible. With the arrival of global cloud-resolving models (currently run for relatively short timescales), there is also an opportunity to improve links between such models and more traditional CMIP models, with HighResMIP providing a bridge to link understanding between these domains. HighResMIP also aims to link to other CMIP projects and international efforts such as the World Climate Research Program lighthouse activities and various digital twin initiatives. It also has the potential to be used as training and validation data for the fast-evolving machine learning climate models.

54 ENVIRONMENTAL SCIENCES↗

Synthesis, characterization and optical properties of ATiO{sub 3}–Pr thin films prepared by a photochemical method (where A = Ba and Ca)

Highlights: • A method of photochemical deposition has been used to the preparation of (Ba,Ca)TiO{sub 3} thin films doped Pr(III). • The (Ba,Ca)TiO{sub 3}/Pr(III) films under 375 nm excitation shows emissions attributable to {sup 1}D{sub 2} → {sup 3}H{sub 4} transition of Pr ion. • These PL signals decreased above 10 mol% of Pr(III). • Analysis suggests the presence of intermediate energy levels in the band gap influences in the PL processes. - Abstract: This article reports the characterization and optical properties of (Ba,Ca)TiO{sub 3} thin films doped with Pr at different proportions (0–15 mol%). The films were deposited on Si (1 0 0) and quartz substrates using a photochemical method and post-annealed at 900 °C. The evaluation of photo-reactivity of the precursor complexes was monitored by UV–vis and FT-IR spectroscopy. The obtained films were characterized by X-ray diffraction and X-ray photoelectron spectroscopy. The results indicate that Ba, Ca, Ti, O and Pr are present in the form of perovskite. Under UV light excitation (375 nm) the (Ba,Ca)TiO{sub 3}–Pr films show the characteristic emissions ascribed to {sup 1}D{sub 2} → {sup 3}H{sub 4} transition of Pr{sup 3+} ion. The optical measurements show the presence of intermediate energy levels in the band gap which influence the emission processes.

36 MATERIALS SCIENCE↗

2018 NISAR Applications Workshop: Wetlands; Workshop Report

Wetland ecosystems are a critical part of our natural environment, providing socioeconomic benefits to human communities and habitats to a rich diversity of plant and animal life. Socioeconomic benefits include improved water quality, flood control, foods, shoreline stabilization, groundwater recharge, and recreational opportunities. Wetlands also have a major role as carbon sinks and sources through processes that are influenced by the duration and timing of soil saturation and inundation. Thus, carbon and water cycle models must take into account wetland extent and seasonal patterns of wetland inundation. The joint NASA, US Geological Survey (USGS) and Fish and Wildlife Service (FWS) workshop focused on advancing wetland applications of the spaceborne NASA-ISRO Synthetic Aperture Radar (SAR) mission (NISAR), a jointly developed satellite between NASA and the Indian Space Research Organisation (ISRO) expected for launch early 2022. Participants from 15 national and international organizations --including US Federal Agencies, nonprofits, academics, and the private sector-- had been identified as key-players in facilitating integration of Earth Observations into decision support workflows. Discussions were held over two and a half days to convey the knowledge and measurement needs of the wetlands community and discuss the delivery of relevant geospatial products that could be derived from NISAR data. While the community typically characterizes wetlands by their hydrological process, vegetation and soil types, a central defining characteristic is that a wetland is a land area inundated or saturated in the rootzone for at least 2 weeks of the average vegetation growing season.

FWS↗

A New Photocatalyst Bismuth Oxo Citrate: Synthesis, Characterization, and Photocatalytic Performance

A new photocatalyst bismuth oxo citrate was synthesized by facile precipitation process with calcination at 200 8C. The photocatalyst was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fouriertransform infrared (FTIR) spectroscopy, N2 sorptometry, and elemental analysis. Morphologically, it is composed of polyhedral particles with different, irregular shapes and sizes. The specific surface area (SSA) of the photocatalyst was 8.92 m2 g-1. It showed very good photocatalytic performance and reusability. Total decolorization of Reactive Blue 19 (RB19) was achieved in less than 10 minutes, which is much faster in comparison with TiO{sub 2} P25. Also, bismuth oxo citrate showed higher photocatalytic activity than other photocatalysts based on bismuth compounds reported by other authors. Optimal photocatalysis parameters were pH 2 and photocatalyst dose of 250 mg dm-3. The decolorization rate was found to decrease as initial dye concentration increased. The photocatalytic data best fitted to L-H kinetic model with pseudo-first order reaction rate. Chrastil diffusion model showed that diffusion has not influence on the process. Water Environ. Res., 90, 719 (2018). © 2018 Water Environment Federation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structures of an ActRIIB:activin A complex reveal a novel binding mode for TGF-beta ligand:receptor interactions

The TGF-{beta} superfamily of ligands and receptors stimulate cellular events in diverse processes ranging from cell fate specification in development to immune suppression. Activins define a major subgroup of TGF-{beta} ligands that regulate cellular differentiation, proliferation, activation and apoptosis. Activins signal through complexes formed with type I and type II serine/threonine kinase receptors. We have solved the crystal structure of activin A bound to the extracellular domain of a type II receptor, ActRIIB, revealing the details of this interaction. ActRIIB binds to the outer edges of the activin finger regions, with the two receptors juxtaposed in close proximity, in a mode that differs from TGF-{beta}3 binding to type II receptors. The dimeric activin A structure differs from other known TGF-{beta} ligand structures, adopting a compact folded-back conformation. The crystal structure of the complex is consistent with recruitment of two type I receptors into a close packed arrangement at the cell surface and suggests that diversity in the conformational arrangements of TGF-{beta} ligand dimers could influence cellular signaling processes.

36 MATERIALS SCIENCE↗

High speed rail comparative strategic assessments in EU member states

This paper explores the role and capacity of strategic level assessments in addressing the strategic dimension of High Speed Rail (HSR) proposals and influencing decision-making processes. The overall research objective was to find out to what extent opportunities for strategic thinking are being undertaken in HSR. Three different cases of high speed rail were compared – High Speed Rail 2 (HS2) in the UK, High Speed Rail Network (RFAV) in Portugal and European Gauge Railway Line Kaunas in the Lithuanian-Latvian Border (Rail Baltica 2). Strategic environmental assessment (SEA) effectiveness literature was reviewed to draw on criteria that could establish a comparative framework to explain how environmental and sustainability assessments were undertaken in the three aforementioned European high speed rail case studies. Research results allow us to conclude that an SEA or a sustainability assessment/appraisal (SA) will be most beneficial if developed before any HSR project to first determine if HSR is really necessary and strategically justifiable to the achievement of both environmental and sustainability objectives. Results achieved suggest that even though the SEA and SA in the three cases studied can be said to have influenced the planning process mostly at project-level decisions, it also shows a missed opportunity to contribute to developing a high level strategy for HSR that addresses several strategic issues, assessing options before they are undertaken. - Highlights: •HSR network is strategically relevant for European development. •SEA and SA have been used to support HSR decision-making processes in Europe. •Three HSR SEA/SA cases in Europe (UK, Portugal and Lithuania-Latvia) were reviewed. •Cases were compared in relation to the strategic nature of the assessment. •Conclusions show a missed opportunity to address to a high level strategy for HSR.

54 ENVIRONMENTAL SCIENCES↗

Effect of Atmospheric Organics on Bioavailable Fe Lifetime in the Oceans

The deposition of atmospheric aerosols is an important supply pathway of soluble iron (sol-Fe) to the global oceans influencing marine ecosystem processes and climate. Previous studies have shown that natural and anthropogenic acidic trace gases, when mixed with mineral dust, can lead to production of sol-Fe, leading to considerable increase in dust-Fe solubility. Recent studies have further highlighted the importance of atmospheric organic compounds/ligands in the production of sol-Fe during atmospheric transport and transformation of mineral aerosols. However, the actual scope of this aerosol sol-Fe for stimulating the primary productivity in the oceans is determined by both: the total atmospheric fluxes of sol-Fe and the lifetime of sol-Fe after its deposition to the ocean. In this study several atmospheric organic ligands were investigated for their effect on the lifetime of sol-Fe after mixing with seawater. Organic ligands were selected based on their abundance in the marine boundary layer and rainwater and their ability to form bidentate complexes with Fe. The results reveal that the tested organics had minor influence on Fe(II) lifetime in seawater. However, results also show that some organic acid considerably extended the lifetime of colloidal and aqueous Fe(III). Using these results we simulate aerosol sol-Fe lifetime in the ocean for different mineral dust deposition events in the presence and the absence of atmospheric organic ligands. The calculations suggest that when a large dust plume is assumed to contain Fe(II) alone, less than 15% of aerosol sol-Fe gets complexed with marine organic ligands. However, this fraction increases to over 90% when atmospheric Fe is allowed to bond with atmospheric organic acids prior to deposition to the oceans. Calculations also show that for the conditions when seawater organic ligands get titrated by Fe released from dust aerosol particles, retention of sol-Fe in the ocean depends on surface ocean mixing, i.e., replenishing rates for Fe-bonding ligands from below. This study suggests that in future ocean biogeochemistry models more attention should be devoted to better quantification of the role of atmospheric organic acids in the lifetime of aerosol sol-Fe after its deposition to the ocean and the improvements of upper ocean turbulence parameterizations.

Oceans↗

Investigation of in situ high temperature sensor based on the direct absorption spectroscopy signal of ammonia gas for coal-fired power plant

The selective catalytic reduction and non-selective catalytic reduction (SCR/SNCR) are the most popular de-NOx processes for coal-fired power plant, where the real-time temperature is a significant parameter. A new developed tunable diode laser spectroscopy used for measuring the temperature of ammonia (NH{sub 3}) in the process of SCR/SNCR influenced by strong exhaust gas matrices CO{sub 2} and H{sub 2}O was presented in this paper. Two lines near 6605 cm{sup −1} were selected, with rather weak temperature dependency and minimal interface from CO{sub 2} and H{sub 2}O according to HITRAN12 database. A homemade heating equipment for high temperature laser spectroscopy measurement was developed based on an ARM microcontroller. The temperature calibration experiments of absorption lines were carried out at variable concentrations under different temperatures. The spectral signals of 2.5%, 3.5% and 4.5% NH{sub 3} were observed for validation of the generalization and robustness of the sensor. The calibration and validation experimental results show that the maximum measurement error and global average error of the temperature sensor with the temperature ranging from 453 to 653 K are less than 2% and 1.38%, respectively. It demonstrates that our proposed sensor with high accuracy and linearity, and can be utilized to measure the temperature in SNCR/SCR process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A study on in situ growth of TaC whiskers in Al{sub 2}O{sub 3} matrix powder for ceramic cutting tools

Graphical abstract: In situ growth of TaC whiskers (TaC{sub w}) was synthesized in an α-Al{sub 2}O{sub 3} matrix powder via a carbothermal reduction technique. The whiskers were 0.2–0.5 μm in diameter and 5–15 μm in length; they were straight and had smooth surfaces. Highlights: ► In situ growth of TaC whiskers was synthesized in an α-Al{sub 2}O{sub 3} matrix powder. ► The wet mixing method and 1450 °C were suitable for whiskers growth. ► The growth of TaC whiskers is not influenced by the Al{sub 2}O{sub 3} powder. ► The major impurities were TaC particles, nickel and unreacted carbon. -- Abstract: In situ growth of tantalum carbide (TaC) whiskers was synthesized in an α-Al{sub 2}O{sub 3} matrix powder via a carbothermal reduction technique within a temperature range of 1350–1500 °C in an argon atmosphere. The starting materials consisted of Ta{sub 2}O{sub 5}, C, Ni and NaCl powders. Different mixing methods and various reaction temperatures were employed. Most of the prepared whiskers were 0.2–0.5 μm in diameter and 5–15 μm in length. The reaction temperature of 1400–1450 °C was suitable for the growth of TaC whiskers and a wet mixing method was beneficial to increase the whisker yield. Some of the whiskers exhibited the needle shape while others exhibited the screw shape. The growth mechanism of the whiskers was a complex mechanism involving a helical screw dislocation mechanism and a vapor–liquid–solid process. No obvious influences of the Al{sub 2}O{sub 3} matrix powder on the growth of TaC whiskers were found and the major impurities in the obtained powder were TaC particles, nickel and unreacted carbon.

36 MATERIALS SCIENCE↗

Characterization of Urban Air Mobility Vehicle Operational Noise and Community Noise Impact

This presentation focuses on the process for predicting urban air mobility (UAM) vehicle noise at the source and how that can be used to estimate and mitigate the impact on the community. Following conceptual design, in which the vehicle is appropriately sized for its intended mission, a comprehensive analysis must be performed for a range of operating conditions spanning the flight envelope to determine the corresponding configurations of the vehicle, that is, the trimmed states. Many UAM vehicles have redundant controls, so the trimmed state for any particular operating condition may not be unique, with some states producing more noise than others. For each trimmed state, the noise produced by each source, for example, steady and unsteady rotor noise, inclusive of propulsion airframe aeroacoustic effects, may be computed and so-called source noise (hemi)spheres generated. The data may be used for analyses supporting noise certification or serve as input to auralizations (turning the numerical data into an audible sound) that can subsequently be used as part of a perception-influenced acoustic design process. Land use planning tools, including those using simulation and integrated modeling approaches, also use these (or derived) data to generate noise exposure maps on the ground. Finally, the data may be used to support development of low noise flight operations using an acoustic flight simulator or acoustically aware flight control.

urban air mobility↗

Detection of electromagnetic pulses produced by hypervelocity micro particle impact plasmas

Hypervelocity micro particles (mass < 1 ng), including meteoroids and space debris, routinely impact spacecraft and produce plasmas that are initially dense (∼10{sup 28} m{sup −3}), but rapidly expand into the surrounding vacuum. We report the detection of radio frequency (RF) emission associated with electromagnetic pulses (EMPs) from hypervelocity impacts of micro particles in ground-based experiments using micro particles that are 15 orders of magnitude less massive than previously observed. The EMP production is a stochastic process that is influenced by plasma turbulence such that the EMP detection rate that is strongly dependent on impact speed and on the electrical charge conditions at the impact surface. In particular, impacts of the fastest micro particles occurring under spacecraft charging conditions representative of high geomagnetic activity are the most likely to produce RF emission. This new phenomenon may provide a source for unexplained RF measurements on spacecraft charged to high potentials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pore confinement enhances but surface adhesion reduces bacterial cell-to-cell conjugation

As the habitats of bacteria, soil pore network and surface properties control the distribution, adhesion, and motility of bacteria in soils. These physical processes in turn influence bacterial accesses to nutrients and bacterial interactions. Our understanding on the pore- and surface-mediated bacterial interactions is currently limited. In this research, we evaluated the effects of soil pore confinement and surface adhesion on conjugation-based bacterial interactions. The interaction was measured by plasmid transfer between donor and recipient cells within the population of soil bacterium Pseudomonas putida. We found that the presence of porous sand media led to a net increase in conjugation frequency compared to sand-free liquid control. The increase is attributed to the facilitated effect of pore confinement on the collision of bacteria within pores. In contrast, bacterial adhesion to sand surfaces under elevated ionic strength conditions decreased the conjugation frequency as a result of mobility reduction on the surface. Such collision and adhesion mechanisms jointly drive the conjugation as a function of pore and surface properties of porous media. Finally, these results provide valuable insights into the roles of soil pores and surfaces in regulating horizontal gene transfer, an essential cell-to-cell interaction sustaining key processes of soil ecology and health.

59 BASIC BIOLOGICAL SCIENCES↗

The role of non-equilibrium fluxes in the relaxation processes of the linear chemical master equation

We propose a non-equilibrium thermodynamical description in terms of the Chemical Master Equation (CME) to characterize the dynamics of a chemical cycle chain reaction among m different species. These systems can be closed or open for energy and molecules exchange with the environment, which determines how they relax to the stationary state. Closed systems reach an equilibrium state (characterized by the detailed balance condition (D.B.)), while open systems will reach a non-equilibrium steady state (NESS). The principal difference between D.B. and NESS is due to the presence of chemical fluxes. In the D.B. condition the fluxes are absent while for the NESS case, the chemical fluxes are necessary for the state maintaining. All the biological systems are characterized by their “far from equilibrium behavior,” hence the NESS is a good candidate for a realistic description of the dynamical and thermodynamical properties of living organisms. In this work we consider a CME written in terms of a discrete Kolmogorov forward equation, which lead us to write explicitly the non-equilibrium chemical fluxes. For systems in NESS, we show that there is a non-conservative “external vector field” whose is linearly proportional to the chemical fluxes. We also demonstrate that the modulation of these external fields does not change their stationary distributions, which ensure us to study the same system and outline the differences in the system's behavior when it switches from the D.B. regime to NESS. We were interested to see how the non-equilibrium fluxes influence the relaxation process during the reaching of the stationary distribution. By performing analytical and numerical analysis, our central result is that the presence of the non-equilibrium chemical fluxes reduces the characteristic relaxation time with respect to the D.B. condition. Within a biochemical and biological perspective, this result can be related to the “plasticity property” of biological systems and to their capabilities to switch from one state to another as is observed during synaptic plasticity, cell fate determination, and differentiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Urban Air Mobility Vehicle Operational Noise and Community Noise Impact

This presentation focuses on the process for predicting urban air mobility (UAM) vehicle noise at the source and how that can be used to estimate the impact on the community. Following conceptual design, in which the vehicle is appropriately sized for its intended mission, a comprehensive analysis must be performed for a range of operating conditions spanning the flight envelope to determine the corresponding configurations of the vehicle, that is, the trimmed states. Many UAM vehicles have redundant controls, so the trimmed state for any particular operating condition may not be unique, with some states producing more noise than others. For each trimmed state, the noise produced by each source, for example, steady and unsteady rotor noise, inclusive of propulsion airframe aeroacoustic effects, may be computed and so-called source noise (hemi)spheres generated. Land use planning tools, including those using simulation and integrated modeling approaches, use these (or derived) data to generate noise exposure maps on the ground. Alternatively, these data may serve as input to auralization, turning the numerical data into an audible sound that can subsequently be used as part of a perception-influenced acoustic design process that takes into account human response.

urban air mobiliy↗

Cross-scale impact of climate temporal variability on ecosystem water and carbon fluxes

While the importance of ecosystem functioning is undisputed in the context of climate change and Earth system modeling, the role of short-scale temporal variability of hydrometeorological forcing (~1 h) on the related ecosystem processes remains to be fully understood. Additionally, various impacts of meteorological forcing variability on water and carbon fluxes across a range of scales are explored here using numerical simulations. Synthetic meteorological drivers that highlight dynamic features of the short temporal scale in series of precipitation, temperature, and radiation are constructed. These drivers force a mechanistic ecohydrological model that propagates information content into the dynamics of water and carbon fluxes for an ensemble of representative ecosystems. The focus of the analysis is on a cross-scale effect of the short-scale forcing variability on the modeled evapotranspiration and ecosystem carbon assimilation. Interannual variability of water and carbon fluxes is emphasized in the analysis. The main study inferences are summarized as follows: (a) short-scale variability of meteorological input does affect water and carbon fluxes across a wide range of time scales, spanning from the hourly to the annual and longer scales; (b) different ecosystems respond to the various characteristics of the short-scale variability of the climate forcing in various ways, depending on dominant factors limiting system productivity; (c) whenever short-scale variability of meteorological forcing influences primarily fast processes such as photosynthesis, its impact on the slow-scale variability of water and carbon fluxes is small; and (d) whenever short-scale variability of the meteorological forcing impacts slow processes such as movement and storage of water in the soil, the effects of the variability can propagate to annual and longer time scales.

58 GEOSCIENCES↗

Characterizing Self-Assembled Monolayer Breakdown in Area-Selective Atomic Layer Deposition

In order to enable area-selective atomic layer deposition (AS-ALD), self-assembled monolayers (SAMs) have been used as the surface inhibitor to block a variety of ALD processes. The integrity of the SAM throughout the ALD process is critical to AS-ALD. Despite the demonstrated effectiveness of inhibition by SAMs, nucleation during ALD eventually occurs on SAM-protected surfaces, but its impact on SAM structures is still not fully understood. In this study, we chose the octadecyltrichlorosilane (ODTS) SAM as a model system to investigate the evolution of crystallinity and structure of SAMs before and after ALD. The breakdown behavior of SAMs when exposed to ZnO and Al 2 O 3 ALD was systematically studied by combining synchrotron X-ray techniques and electron microscopy. We show that the crystallinity and structure of ODTS SAMs grown on Si substrates remain intact until a significant amount of material deposition takes place. In addition, the undesired ALD materials that grow on ODTS SAMs present contrasting morphologies: dispersed nanoparticles for ZnO while relatively continuous film for Al 2 O 3 . Lastly, substrate dependency was explored by comparing a Si substrate to single-crystal sapphire. Similar results in the evolution of SAM crystallinity and formation of ALD nuclei on top of SAM are observed in the ODTS–sapphire system. This study provides an in-depth view of the influence of ALD processes on the SAM structure and the nucleation behavior of ALD on SAM-protected surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Mixed Mode I-Mode II Loading on Fatigue Delamination Growth Characteristics of a Graphite Epoxy Tape Laminate

Mixed mode I-mode II interlaminar tests were conducted on IM7/8552 tape laminates using the mixed-mode bending test. Three mixed mode ratios, G(sub II)/G(sub T) = 0.2, 0.5, and 0.8, were considered. Tests were performed at all three mixed-mode ratios under quasi-static and cyclic loading conditions, where the former static tests were used to determine initial loading levels for the latter fatigue tests. Fatigue tests at each mixed-mode ratio were performed at four loading levels, Gmax, equal to 0.5G(sub c), 0.4G(sub c), 0.3G(sub c), and 0.2G(sub c), where G(sub c) is the interlaminar fracture toughness of the corresponding mixed-mode ratio at which a test was performed. All fatigue tests were performed using constant-amplitude load control and delamination growth was automatically documented using compliance solutions obtained from the corresponding quasi-static tests. Static fracture toughness data yielded a mixed-mode delamination criterion that exhibited monotonic increase in Gc with mixed-mode ratio, G(sub II)/G(sub T). Fatigue delamination onset parameters varied monotonically with G(sub II)/G(sub T), which was expected based on the fracture toughness data. Analysis of non-normalized data yielded a monotonic change in Paris law exponent with mode ratio. This was not the case when normalized data were analyzed. Fatigue data normalized by the static R-curve were most affected in specimens tested at G(sub II)/G(sub T)=0.2 (this process has little influence on the other data). In this case, the normalized data yielded a higher delamination growth rate compared to the raw data for a given loading level. Overall, fiber bridging appeared to be the dominant mechanism, affecting delamination growth rates in specimens tested at different load levels and differing mixed-mode ratios.

Ratcliffe, James G.↗