Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Neutron Diffraction and Neutron Radiography Investigation into Powder Sintering of Ti/Al and TiH{sub 2}/Al Compacts

Sintering behaviors of two types of powder compact, i.e., Ti/Al and TiH{sub 2}/Al, under vacuum were studied using in situ neutron diffraction, in situ thermal dilatometric measurement, and ex situ neutron radiography. Their densification, microstructure, hydrogen concentration, and phase transformation features were compared. The results indicate that the predominant phase identified in the samples sintered from both compacts is γ-TiAl phase with minor Ti{sub 3}Al phase. Dehydrogenation of TiH{sub 2} plays a decisive role in the sintering behavior and the resultant microstructure. In comparison with the Ti/Al compact, dehydrogenation occurring in the TiH{sub 2}/Al compact leads to a higher level of densification and faster sintering kinetics.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Electron Backscattered Diffraction Study of Microstructural Evolution During Isothermal Deformation of High-N Mn18Cr18 Alloy

In order to understand the dynamic recrystallization (DRX) mechanism of Mn18Cr18N austenitic stainless steel during hot deformation, the investigation of microstructure evolution is significant. Isothermal compression tests were conducted on a Gleeble-3500 thermomechanical simulator in the temperature range of 950 °C to 1150 °C and strain rate range between 0.001 and 1 s{sup −1}. Optical microscopy (OM) and electron backscattered diffraction (EBSD) were employed to study the resultant microstructures. More grain boundary information of hot-deformed specimens was provided by EBSD. It was found that the fraction of low-angle grain boundaries (LAGBs) increases with the decrease of deformation temperature or the increase of strain rate and can be expressed as a function of the Zener–Hollomon parameter. DRX easily occurs at the high deformation temperature and low strain rate. From the flow stress curves, the occurrence of single peak behavior and multiple transient steady-state (MTSS) behavior illustrated the existence of different DRX mechanisms. The EBSD analysis indicated that both continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX) existed during hot deformation. For the low fraction of 10 to 15 deg misorientation, CDRX is the minor DRX mechanism while DDRX is the major DRX mechanism for the studied steel.

36 MATERIALS SCIENCE↗
DOE OSTI2018

X-ray Diffraction Investigation of Annealing Behavior of Peened Surface Deformation Layer on Precipitation Hardening Stainless Steel

In order to investigate the recrystallization behavior of peened surface deformation layer of precipitation hardening stainless steel, a classic x-ray diffraction line profile analysis, Voigt method, was carried out on peened 17-4PH with different isothermal annealing temperatures. The activation energy of domain boundary migration (Q{sub a}) and the activation energy of microstrain relaxation (Q{sub b}) were calculated by regression analysis in different annealing temperature conditions. The results show that the value of Q{sub a} decreases with annealing temperature increasing, which is due to the influence of precipitation (ε-Cu) size on the movements of grain and subgrain boundaries. The maximum growth rate of ε-Cu particles occurs during 400 to 500 °C interval. Compared with growth behavior of domain size, microstrain relaxation behavior is less sensitive to precipitation particle size. The effects of annealing temperature and time on dislocation density are both significant when annealing temperature is lower than 500 °C. However, the effect of annealing temperature on dislocation density becomes insignificant when annealing temperature is higher than 500 °C. 300 °C annealing temperature only leads to the microstrain relaxation but nearly cannot lead to the domain size growth even if prolonging annealing time. Microstructure enhancement effect still exists in plastic deformation layer when 300 °C annealing temperature lasts for 60 min but nearly disappears when 600 °C annealing temperature lasts for 20 min.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Electron Backscattered Diffraction Study of Pulse Electrodeposited Cu-Y{sub 2}O{sub 3} Composite Coating

The current investigation is an effort of correlating the grain growth, crystallographic orientation and second-phase Y{sub 2}O{sub 3} particles to the mechanical properties of the electrodeposited pure copper (Cu) and Cu-Y{sub 2}O{sub 3} coatings. Energy-dispersive spectrum and elemental mapping confirm the codeposition of Y{sub 2}O{sub 3} in the composite coating matrix, which indeed justifies the composite (Cu-Y{sub 2}O{sub 3}) coating. Both pure Cu and Cu-Y{sub 2}O{sub 3} coatings have (101) preferred orientation; however, the volume fraction is found comparatively lower in composite coating. Both microstructural and textural characterization through electron backscattered diffraction technique show significant grain refinement in case of Cu-Y{sub 2}O{sub 3} composite coating compared to pure Cu coating, and prominent 〈011〉 fiber texture is observed in case of pure Cu coating compared to composite coating. By the addition of second-phase Y{sub 2}O{sub 3} in the matrix, the 〈011〉 fiber texture is disintegrated and concentrated at ϕ{sub 1} = 37°, ϕ = 45°, ϕ{sub 2} = 0°. Despite lower volume fraction of 〈011〉 fiber texture, better mechanical properties (hardness and wear resistance) of the composite coating compared to pure Cu coating can be attributed to finer grain size, higher misorientation angle and incorporation of second-phase Y{sub 2}O{sub 3} particles.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The Determination of Residual Stress in Quenched and Cold-Compressed 7050 Aluminum Alloy T-Section Forgings by the Contour Method and Neutron Diffraction

Residual stresses were determined through the thickness of quenched and quenched followed by cold compression 7050 aluminum alloy T-section forgings using the contour method and neutron diffraction. 7050 T-section forgings are used for the manufacture of the connecting joints of wing and fuselage. Inevitably high residual stresses are introduced during the quenching process of 7050 T-section forgings, which could be reduced by cold compression to overcome the effect of residual stress on machining deformation. The longitudinal residual stresses obtained by the two techniques achieved good agreement in both trend and magnitude in both the quenched and quenched followed by cold compression 7050 T-section forgings. The stress-free lattice spacing of Al(311), the Bragg reflection used for the neutron measurements, was obtained from a 5-mm slice using the plane-stress condition, and its variation through the thickness is insignificant in both the quenched specimen and quenched followed by cold compression specimen. A comparison of the residual stresses in the quenched specimen and quenched followed by cold compression specimen showed significant changes in range of residual stresses from (− 304, 262 MPa) induced by quenching process to (− 125, 142 MPa) due to 3% cold compression. The percentage reduction in residual stress in the quenched specimen due to 3% cold compression was (46, 59%).

36 MATERIALS SCIENCE↗
DOE OSTI2018

Ambient and High-Temperature Bulk Characterization of Additively Manufactured Ti-6Al-4V Using Neutron Diffraction

Characterization of the bulk microstructure using neutron diffraction has been applied to investigate the phase fractions and textures of α- and β-phases in Ti-6Al-4V fabricated by additive manufacturing. The microstructure of a specimen cut from a fan structure, built by either electron beam melting (EBM) or selective laser melting, indicated that predominantly the build direction and not the fan angle determines the microstructure. In situ heating experiments of specimens from a rod built using EBM provided insight into the lattice strain, phase fraction, and texture evolution, providing a rich picture of the microstructure changes during heat treatment of additively manufactured Ti-6Al-4V. Finally, a remarkably low weight fraction of β-phase at lower temperatures, deviations from thermal expansion behavior attributed to vanadium repartitioning, as well as texture strengthening were observed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cryogenic Stress-Driven Grain Growth Observed via Microcompression with in situ Electron Backscatter Diffraction

The deformation of materials at cryogenic temperature is of interest for space, arctic, and fundamental science applications. In this work, a custom-built cooling system attached to a commercial picoindenter was used for in situ cryogenic microcompression testing of equal-channel angular-pressed copper with real-time electron backscatter diffraction. Stress-driven grain growth at cryogenic temperatures was observed during a series of elastic and plastic deformations. Finally, these results provide direct evidence for the previously predicted phenomenon, whereas previous ex situ examinations demonstrated coarsening after cryogenic loading when samples were not maintained at cryogenic temperatures between deformation and characterization.

36 MATERIALS SCIENCE↗
DOE OSTI2021

AFRL Additive Manufacturing Modeling Series: Challenge 1, Characterization of Residual Strain Distribution in Additively-Manufactured Metal Parts Using Energy-Dispersive Diffraction

A machine component fabricated by additive manufacturing (AM) of metal powders often possesses steep residual stress gradients with significant magnitudes due to large temperature gradients that transpire within a localized area during fabrication. These processing-induced residual stresses can cause distortion of the part, and if they are of significant magnitude, they could induce cracking of the component, degrade printability, and/or diminish subsequent mechanical performance. The ability to predict these residual stresses imparted by AM is an important step in permeating AM technology for advanced manufacturing. Calibration and validation of AM process models used for prediction are, therefore, a critical step in understanding the origin and mitigating the challenges associated with residual stresses inherent to the AM process. In the present work, the residual strain distributions in components with simple geometries fabricated by a laser powder bed fusion (LBPF) process were characterized non-destructively using energy-dispersive X-ray diffraction in support of the US Air Force Research Laboratory Additive Manufacturing Modeling Challenge Series Groeber et al. (JOM 70:441-448, 2018). The measurement setup and approach are described in detail so that the data can be used as a benchmark to calibrate and validate models for the prediction of macro-scale residual stresses due to the LPBF process.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High-Throughput Microstructural Characterization and Process Correlation Using Automated Electron Backscatter Diffraction

The need to optimize the processing conditions of additively manufactured (AM) metals and alloys has driven advances in throughput capabilities for material property measurements such as tensile strength or hardness. High-throughput (HT) characterization of AM metal microstructure has fallen significantly behind the pace of property measurements due to intrinsic bottlenecks associated with the artisan and labor-intensive preparation methods required to produce highly polished surfaces. This inequality in data throughput has led to a reliance on heuristics to connect process to structure or structure to properties for AM structural materials. In this study, we show a transformative approach to achieve laser powder bed fusion (LPBF) printing, HT preparation using dry electropolishing and HT electron backscatter diffraction (EBSD). This approach was used to construct a library of > 600 experimental EBSD sample sets spanning a diverse range of LPBF process conditions for AM Kovar. This vast library is far more expansive in parameter space than most state-of-the-art studies, yet it required only approximately 10 labor hours to acquire. Build geometries, surface preparation methods, and microscopy details, as well as the entire library of >600 EBSD data sets over the two sample design versions, have been shared with intent for the materials community to leverage the data and further advance the approach. Using this library, we investigated process–structure relationships and uncovered an unexpected, strong dependence of microstructure on location within the build, when varied, using otherwise identical laser parameters.

Characterization and Analytical Technique↗
DOE OSTI2016

Synchrotron X-ray microbeam diffraction measurements of full elastic long range internal strain and stress tensors in commercial-purity aluminum processed by multiple passes of equal-channel angular pressing

Synchrotron X-ray microbeam diffraction was used to measure the full elastic long range internal strain and stress tensors of low dislocation density regions within the submicrometer grain/subgrain structure of equal-channel angular pressed (ECAP) aluminum alloy AA1050 after 1, 2, and 8 passes using route B C . This is the first time that full tensors were measured in plastically deformed metals at this length scale. The maximum (most tensile or least compressive) principal elastic strain directions for the unloaded 1 pass sample for the grain/subgrain interiors align well with the pressing direction, and are more random for the 2 and 8 pass samples. The measurements reported here indicate that the local stresses and strains become increasingly isotropic (homogenized) with increasing ECAP passes using route BC. The average maximum (in magnitude) LRISs are -0.43 σ a for 1 pass, -0.44 σ a for 2 pass, and 0.14 σ a for the 8 pass sample. Furthermore, these LRISs are larger than those reported previously because those earlier measurements were unable to measure the full stress tensor. Significantly, the measured stresses are inconsistent with the two-component composite model.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Direct measurement of critical resolved shear stress of prismatic and basal slip in polycrystalline Ti using high energy X-ray diffraction microscopy

Knowledge of the critical resolved shear stress (CRSS) values of different slip modes is important for accurately modeling plastic deformation of hexagonal materials. Here, we demonstrate that CRSS can be directly measured with an in-situ high energy X-ray diffraction microscopy (HEDM) experiment. A commercially pure Ti tensile specimen was deformed up to 2.6% strain. In-situ far-field HEDM experiments were carried out to track the evolution of crystallographic orientations, centers of masses, and stress states of 1153 grains in a material volume of 1.1mm×1mm×1mm. Predominant prismatic slip was identified in 18 grains, where the orientation change occurred primarily by rotation around the c-axis during specimen deformation. By analyzing the resolved shear stress on individual slip systems, the estimated CRSS for prismatic slip is 96±18 MPa. Predominant basal slip was identified in 22 other grains, where the 2 orientation change occurred primarily by tilting the c-axis about an axis in the basal plane. The estimated CRSS for basal slip is 127±33 MPa. The ratio of CRSS basal /CRSS prismatic is in the range of 1.7-2.1. From indirect assessment, the CRSS for pyramidal < c+a > slip is likely greater than 240MPa. Lastly, grain size and free surface effects on the CRSS value in different grains are also examined.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

Investigation of fatigue crack initiation from a non-metallic inclusion via high energy x-ray diffraction microscopy

Crack initiation at inclusions is a dominant, unavoidable and life-limiting failure mechanism of important structural materials. Fatigue progresses in a complex manner to find the ‘weakest link’ in the microstructure, leading to crack nucleation. In this study, fully 3-D characterization methods using high-energy synchrotron x-rays are combined with in-situ mechanical testing to study the crack initiation mechanism in a Ni-based superalloy specimen. The specimen was produced via powder metallurgy and seeded with a non-metallic inclusion. Two x-ray techniques were employed: absorption contrast computed micro-tomography (μ-CT) to determine the morphology of the inclusion and its location in the gauge section of the specimen; and far-field high-energy diffraction microscopy (FF-HEDM) to resolve the centroids, average orientations, and lattice strains of the individual grains comprising the microstructure surrounding the inclusion. Sequential μ-CT and FF-HEDM scans were carried out at both peak and zero applied stress following schedules of cyclic deformation. The µ-CT data showed the onset and location of crack initiation, and the FF-HEDM data provided temporal and spatial evolution of the intergranular strains. Strain partitioning and the associated stress heterogeneities that develop are shown to stabilize within a few loading cycles. Elasto-viscoplastic fast Fourier transform simulations were utilized to supplement interpretation of the experimental stress distributions and compared with the experimental stress distributions. In conclusion, appropriate conditions for crack nucleation in the form of stress gradients were demonstrated and created by virtue of the inclusion, specifically the residual stress state and local bonding state at the inclusion-matrix interface.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Temperature-dependent micromechanical behavior of medium-Mn transformation-induced-plasticity steel studied by in situ synchrotron X-ray diffraction

The temperature-dependent micromechanical behavior of medium-Mn transformation-induced-plasticity (TRIP) steel with a nominal chemical composition of Fe-0.1C-10Mn-2Al (mass%) fabricated by intercritical annealing 650 ºC for 1 h after cold-rolling, was investigated using in situ high-energy X-ray diffraction (HE-XRD) with uniaxial tensile tests at temperatures of 100, 25 and -50 ºC. We find that as the deformation temperature decreases, the Luders strain decreases and more austenite transforms to martensite during Luders band propagation. The Luders bands are associated with sudden changes of lattice strain in austenite. At 100 ºC, austenite is too stable to transform to martensite, resulting in limited work-hardening capability and a relatively low strain to failure. At 25 ºC, the austenite is found to transform in bursts during applied loading. These transformations correlate with stepwise peak broadening in the austenite phase and are attributed to Portevin-Le Chatelier (PLC) band propagation. At -50 ºC, we then observe a more intense TRIP effect which suppresses PLC band formation and leads to a high ultimate tensile strength. In addition to the TRIP effect, we find that work hardening in the deformation-induced martensite phase plays an important role in the plastic stability at low temperature, by accommodating stress compatibility between grains and phases. Our studies provide the first direct experimental evidence for the existence of large stress concentrations in the austenite phase near the Luders band propagation front. These observations help to deepen understanding of the complex temperature-dependent micromechanical behaviors of advanced medium-Mn TRIP steels.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Glancing-incidence focussed ion beam milling: A coherent X-ray diffraction study of 3D nano-scale lattice strains and crystal defects

Here, this study presents a detailed examination of the lattice distortions introduced by glancing incidence Focussed Ion Beam (FIB) milling. Using non-destructive multi-reflection Bragg coherent X-ray diffraction we probe damage formation in an initially pristine gold micro-crystal following several stages of FIB milling. These experiments allow access to the full lattice strain tensor in the micro-crystal with ~25 nm 3D spatial resolution, enabling a nano-scale analysis of residual lattice strains and defects formed. Our results show that 30 keV glancing incidence milling produces fewer large defects than normal incidence milling at the same energy. However the resulting residual lattice strains have similar magnitude and extend up to ~50 nm into the sample. At the edges of the milled surface, where the ion-beam tails impact the sample at near-normal incidence, large dislocation loops with a range of Burgers vectors are formed. Further glancing incidence FIB polishing with 5 keV ion energy removes these dislocation loops and reduces the lattice strains caused by higher energy FIB milling. However, even at the lower ion energy, damage-induced lattice strains are present within a ~20 nm thick surface layer. These results highlight the need for careful consideration and management of FIB damage. They also show that low-energy FIB-milling is an effective tool for removing FIB-milling induced lattice strains. This is important for the preparation of micro-mechanical test specimens and strain microscopy samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

In situ synchrotron X-ray diffraction investigations of the physical mechanism of ultra-low strain hardening in Ti-30Zr-10Nb alloy

A warm-rolled, metastable beta-type Ti-30Zr-10Nb alloy exhibited a peculiar two-stage yielding behavior under uniaxial tensile loading, showing a first plastic stage with obvious strain hardening at 0.4%-10.4% strain and a second plastic stage with ultra-low strain hardening at 10.4%-23.5% strain. In situ high-energy X-ray diffraction (HE-XRD) was used to reveal the stress-induced martensitic transformation scenarios and physical mechanism of the different strain hardening rates. It was found that the deformation-induced phase transformation dominated the onset of the first plastic stage corresponding to the selection of favorable martensitic variants, and their elastic interaction contributed to the obvious strain hardening. HE-XRD experiments further verified that the ultra-low strain hardening rate in the second plastic stage was related to an interesting superelasticity of the martensite, which was characterized by the reversible, stress-induced reorientation of the martensite variants. This reorientation of the martensite variants was primarily due to the rigid lattice rotation of similar to 23 degrees about the [110](α '') axis toward the tensile direction. Here, our investigations provide in-depth understanding of the mechanism of the excellent plasticity with ultra-low strain hardening in beta-type titanium alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Electric-field-induced structure and domain texture evolution in PbZrO 3 -based antiferroelectric by in-situ high-energy synchrotron X-ray diffraction

Antiferroelectrics (AFEs) have a great potential for modern electronic devices by virtue of the large strain during the antiferroelectric-to-ferroelectric (AFE-FE) phase transition under external electric fields. Although the fascinating macroscopic properties of AFE materials have been extensively studied, it is still unclear how the underlying structure evolution engenders their defining properties. Here we employ an electric biasing in-situ high-energy synchrotron X-ray diffraction technique to reveal the phase, domain texture, and lattice evolution in a high performance PbZrO 3 -based AFE material. During the reversible AFE-FE transition triggered by electric fields, the evolution of the superstructure for AFE pseudo-tetragonal and FE rhombohedral phase is found to display strong dependence on the angle with respect to the field direction. In contrast to previous prediction, it is found that there is no obvious domain reorientation in the AFE phase, when the system is far away from the AFE-FE transitions. The electric-field-induced FE rhombohedral phase exhibits an unusual microscopic behavior, distinguished from the normal one, presenting small changes in domain texture and lattice strain with electric field, and leading to a small piezoelectric response. The longitudinal, transverse, and volume strains estimated from the XRD peak profiles are well consistent with the macroscopic strain measurements. It is demonstrated that the large strain arises from the structural change associated with anisotropic lattice strain and highly preferential domain reorientation during the AFE-FE transitions. Finally, the AFE-FE switching sequence is constructed based on the present study, which provides a further understating of AFE materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Elucidating the temperature dependence of TRIP in Q&P steels using synchrotron X-Ray diffraction, constituent phase properties, and strain-based kinetics models

Understanding the deformation-induced martensitic transformation (DIMT) is critical for interpreting the structure-property relationships that govern the performance of transformation-induced plasticity (TRIP) assisted steels. However, modern TRIP-assisted steels often exhibit DIMT kinetics that are not easily captured by existing empirical models based on bulk tensile strain. We address this challenge by combined bulk uniaxial tensile tests and in-situ high energy synchrotron X-ray diffraction, which resolved the phase volume fractions, stress-strain response, and microstructure evolution of each constituent phase. A modification of the Olson-Cohen model is implemented, which describes the martensitic transformation kinetics as a function of the estimated partitioned strain in austenite, rather than the bulk tensile strain. This DIMT kinetic model is used as a framework to clarify the root cause of an insufficiently understood toughness trough reported for TRIP-assisted steels during deformation at elevated temperatures. Here, the importance of the temperature-dependent toughness is discussed, based on the opportunity to modify deformation processes to tailor the DIMT kinetics and mechanical properties during forming and in service.

36 MATERIALS SCIENCE↗