Error Analysis of CM Data Products Input Distributions
This goal of this project is to address the current inability to assess the overall error and uncertainty of data products developed and distributed by DOE’s Consequence Management (CM) Program.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This goal of this project is to address the current inability to assess the overall error and uncertainty of data products developed and distributed by DOE’s Consequence Management (CM) Program.
The Federal Radiological Monitoring and Assessment Center (FRMAC) Assessment Manual is the tool used to organize and guide activities of the FRMAC Assessment Division. The mission of the FRMAC Assessment Division in a radiological emergency is to interpret radiological data and predict worker and public doses. This information is used by Decision Makers to recommend protective actions in accordance with Protection Action Guides (PAGs) issued by government agencies. This manual integrates many health physics tools and techniques used to make these assessments.
A large batch of UN microspheres to be used as kernels for TRISO particle fuel was produced using carbothermic reduction and nitriding of a sol-gel feedstock bearing tailored amounts of low-enriched uranium (LEU) oxide and carbon. The process parameters, established in a previous study, produced phasepure NaCl structure UN with dissolved C on the N sublattice. The composition, calculated by refinement of the lattice parameter from X-ray diffraction, was determined to be UC 0.27 N 0.73 . The final accepted product weighed 197.4 g. The microspheres had an average diameter of 797±1.35 μm and a composite mean theoretical density of 89.9±0.5% for a solid solution of UC and UN with the same atomic ratio; both values are reported with their corresponding calculated standard error.
The Advanced Reactor Concepts X-energy (ARC-Xe) Pebble Fuel Development project at Oak Ridge National Laboratory (ORNL) has successfully completed its first year, having made excellent progress in accomplishing programmatic objectives. The primary focus of research at ORNL in support of X-energy has been the training of X-energy fuel fabrication engineers and the establishment of US pebble fuel production capabilities able to supply the Xe-100 pebble-bed reactor. These efforts have been strongly supported by particle fuel fabrication and characterization expertise present at ORNL from the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program.
Collaborative research to improve the performance of as-manufactured thin-wafer crystalline-silicon based solar photovoltaic devices.
The goal of this project is to develop and execute methods for characterizing uncertainty in data products that are deve loped and distributed by the DOE Consequence Management (CM) Program. A global approach to this problem is necessary because multiple sources of error and uncertainty from across the CM skill sets contribute to the ultimate p roduction of CM data products. This report presents the methods used to develop a probabilistic framework to characterize this uncertainty and provides results for an uncertainty analysis for a study scenario analyzed using this framework.
Slycat™ is a web-based system for performing data analysis and visualization of potentially large quantities of remote, high-dimensional data. Slycat™ specializes in working with ensemble data. An ensemble is a group of related data sets, which typically consists of a set of simulation runs exploring the same problem space. An ensemble can be thought of as a set of samples within a multi-variate domain, where each sample is a vector whose value defines a point in high-dimensional space. To understand and describe the underlying problem being modeled in the simulations, ensemble analysis looks for shared behaviors and common features across the group of runs. Additionally, ensemble analysis tries to quantify differences found in any members that deviate from the rest of the group. The Slycat™ system integrates data management, scalable analysis, and visualization. Results are viewed remotely on a user’s desktop via commodity web clients using a multi-tiered hierarchy of computation and data storage, as shown in Figure 1. Our goal is to operate on data as close to the source as possible, thereby reducing time and storage costs associated with data movement. Consequently, we are working to develop parallel analysis capabilities that operate on High Performance Computing (HPC) platforms, to explore approaches for reducing data size, and to implement strategies for staging computation across the Slycat™ hierarchy. Within Slycat™, data and visual analysis are organized around projects, which are shared by a project team. Project members are explicitly added, each with a designated set of permissions. Although users sign-in to access Slycat™, individual accounts are not maintained. Instead, authentication is used to determine project access. Within projects, Slycat™ models capture analysis results and enable data exploration through various visual representations. Although for scientists each simulation run is a model of real-world phenomena given certain conditions, we use the term model to refer to our modeling of the ensemble data, not the physics. Different model types often provide complementary perspectives on data features when analyzing the same data set. Each model visualizes data at several levels of abstraction, allowing the user to range from viewing the ensemble holistically to accessing numeric parameter values for a single run. Bookmarks provide a mechanism for sharing results, enabling interesting model states to be labeled and saved.
Within the Advanced Fuels Campaign the Oak Ridge National Laboratory is looking into the fabrication of enhanced UO 2 fuel candidates. Early in FY18 an open-port glove box line was set up enabling the fabrication and initial characterization of potentially enhanced fuel candidates. The fabrication processes available at the Oak Ridge National Laboratory are unique owing to its UO 3 microsphere feedstock compared to commonly used powder feedstocks. The reported activities demonstrate the feasibility of fabricating advanced UO 2 -Molybdenum ceramics with an enhanced thermal conductivity and high densities. Further development of the fabrication routes and a variety of different dopants is expected to result in a matrix of different advanced fuel candidates. Following initial property screening, the in-reactor performance and suitability of these fuel candidates will be probed in the MiniFuel irradiation set-up at the Oak Ridge National Laboratory.
Uranium nitride has a high U density that is an important property for the accident tolerant fully ceramic microencapsulated fuel design. Gadolinium is burnable poison important for flattening the reactivity of the fuel. The impact of the chemical form of Gd additions to the sol-gel feedstock was investigated in this work. Densities were higher when Gd was incorporated as a nitrate hexahydrate and lower when added as a sesquioxide.
Uranium nitride has a high U density that is an important property for the accident tolerant fully ceramic microencapsulated fuel design. Gadolinium is burnable poison important for flattening the reactivity of the fuel. The impact of the chemical form of Gd additions to the sol-gel feedstock was investigated in this work. Densities were higher when Gd was incorporated as a nitrate hexahydrate and lower when added as a sesquioxide.
The 2018 goals of the Volatilization project are to provide a path forward for the disposal of the powders that will be generated during the future hot cell demonstration of the pretreatment process. For this purpose, cermet and grout waste forms were made using surrogate samples.
A second large -scale chlorination test was completed in February 2017 by chlorinating 250 g of used nuclear fuel (UNF) cladding from a North Anna pressurized water reactor (PWR). Analytical results and a Zr mass balance from this test are described and compared with previous results obtained by the Zirconium Recovery and Recycle Project.
Within the Advanced Fuels Campaign, the Oak Ridge National Laboratory is looking into the fabrication of high-performance UO 2 fuel candidates. The aim of this study was to develop a suitable fabrication avenue to synthesize UO 2 feedstock with controlled dopants to enhance UO 2 grain growth within these fuel candidates. Enlarged UO 2 grains in a nuclear fuel pellet are expected to slow down fission gas diffusion, which would be a preferred property for a high-performance fuel compared to fission gas diffusion in standard UO 2 . The unique fabrication processes for microspherical feedstocks via the internal gelation approach at the Oak Ridge National Laboratory have been developed further to enable the dopant uptake within the UO 2 microspheres. Mn and Cr were added via infiltration and/or addition of the dopant to the starting broth of an internal gelation experiment. The dopants were added in various amounts (ppm) into UO 2 . Even though large amounts of these dopants volatized during sintering, scanning electron microscopy images of the microstructure revealed large UO 2 grains of up to 80 μm for the pellets that were prepared from doped microspherical feedstocks.
All members of the Theoretical (T) Division Community, students, staff members, group leaders, division management and other interested individuals are invited to come and support the following student(s) during their Lightning Talk presentation. The Lightning Talk Series is a forum for T Division students to present information about their current projects.
A set of radionuclide - decay chain truncation rules have been developed for use in the Turbo FRMAC and Specialized Hazard Assessment Response Capability (SHARC) software programs used to support radiological emergency response activities . Following the proposed rules, the software will truncate a decay chain after it encounters a progeny radionuclide with a half - life greater than 5,000 years. An analysis of the projected dose from many parent and progeny radionuclides over a 50 - year time period yielded that a radionuclide half - life cutoff of 5,000 years will exclude a negligible dose. Implementing the truncation rules will reduce the time required for assessments and minimize computer hardware requ irements without having a significant detrimental effect on dose projections and emergency response decisions. It is noted that the truncation rules may not be suited for long - term ( greater than 50 year) environmental assessments.
The Oak Ridge National Laboratory (ORNL) is looking into the fabrication of high performance UO 2 fuel candidates via the addition of dopants to the UO 2 . The addition of dopants is proposed to cause enlarged grains that will slow down fission gas release from the irradiated fuel pellet candidates. The Cr-doped UO 2 pellets were fabricated from a microspherical feedstock, and enlarged grains were observed during the microstructural characterization. Irradiation under the Miniature Fuel program in the High Flux Isotope Reactor at ORNL will enable the study of irradiation response of such potential fuel candidates and will allow fission gas release benchmarking for these fuel candidates.
One of the key systems required for the Joint Actinide Shock Physics Experimental Research (JASPER) facility is the timely triggering of the Prompt System (PS). The Trigger Unit (TU) is the critical component that determines when the PS is to be triggered. There are two redundant TUs within the JASPER system, and each TU creates three redundant triggers for the PS. In this fashion, the Prompt Trigger System (PTS) can suffer the loss of one sensor, as well as the loss of one TU, and still function correctly. The TU is designed to receive signals from five separate sensors along the flight of the projectile on its way to the target. The TU uses three pairs of these detectors to create a trigger pulse at the appropriate time, based on the actual velocity of the projectile as it passes between the two sensors.
This report details the design and processing conditions for producing hydrous cerium oxide surrogate microspheres using a microfluidics-based approach. Variables such as microfluidic chip design, exit tubing diameter, temperature, and flow rate continue to be investigated. A washing and drying procedure to remove gelation media, unreacted starting material, and unwanted reaction byproducts is under development. Samples are imaged and characterized for analysis.