Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallel computation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Computer program for the load and trajectory analysis of two DOF bodies connected by an elastic tether: Users manual

The derivation of the differential equations of motion of a 3 Degrees of Freedom body joined to a 3 Degrees of Freedom body by an elastic tether. The tether is represented by a spring and dashpot in parallel. A computer program which integrates the equations of motion is also described. Although the derivation of the equations of motions are for a general system, the computer program is written for defining loads in large boosters recovered by parachutes.

Doyle, G. R., Jr.↗
NASA NTRS1996

Aerodynamic Optimization of the High Speed Civil Transport

The aerodynamic optimization program used for wing and fuselage optimization of the High Speed Civil Transport was modified for utilization of multiple processors on parallel processor computers. The modified version uses multiple processors to simultaneously conduct three-dimensional flow solutions of different wing and fuselage geometries for calculations of the gradient functions and for directional searches to minimize an objective function. Demonstrations have shown the parallel program to be useful for coarse grid optimization, however memory problems for processors on the IBM SP2 were encountered when finer grid sizes were used.

Brawley, Stephen C.↗
NASA NTRS2005

Enhancements to PVM's BEOLIN architecture

.4.3 of PVM had previously been enhanced by the addition of a new architecture, BEOLIN, which allowed a PVM user to abstract a Beowulf class computer with a private network to appear as a single system, visible to the outside world, which could spawn tasks on different internal nodes.

BEOLIN↗
NASA NTRS1987

Force user's manual, revised

A methodology for writing parallel programs for shared memory multiprocessors has been formalized as an extension to the Fortran language and implemented as a macro preprocessor. The extended language is known as the Force, and this manual describes how to write Force programs and execute them on the Flexible Computer Corporation Flex/32, the Encore Multimax and the Sequent Balance computers. The parallel extension macros are described in detail, but knowledge of Fortran is assumed.

Jordan, Harry F.↗
NASA NTRS2008

Parallel-Processing Software for Creating Mosaic Images

A computer program implements parallel processing for nearly real-time creation of panoramic mosaics of images of terrain acquired by video cameras on an exploratory robotic vehicle (e.g., a Mars rover). Because the original images are typically acquired at various camera positions and orientations, it is necessary to warp the images into the reference frame of the mosaic before stitching them together to create the mosaic. [Also see "Parallel-Processing Software for Correlating Stereo Images," Software Supplement to NASA Tech Briefs, Vol. 31, No. 9 (September 2007) page 26.] The warping algorithm in this computer program reflects the considerations that (1) for every pixel in the desired final mosaic, a good corresponding point must be found in one or more of the original images and (2) for this purpose, one needs a good mathematical model of the cameras and a good correlation of individual pixels with respect to their positions in three dimensions. The desired mosaic is divided into slices, each of which is assigned to one of a number of central processing units (CPUs) operating simultaneously. The results from the CPUs are gathered and placed into the final mosaic. The time taken to create the mosaic depends upon the number of CPUs, the speed of each CPU, and whether a local or a remote data-staging mechanism is used.

Klimeck, Gerhard↗
NASA NTRS1990

Time-accurate Navier-Stokes computations of self-excited two-dimensional unsteady cavity flows

Time-accurate Navier Stokes computations were performed to study self-excited oscillatory shear layer behavior over a two-dimensional rectangular cavity and to gain insight into the vortex-acoustic coupling that sustains these oscillations. Results were obtained solving the full, unsteady compressible Navier-Stokes equations for Reynolds-averaged turbulent air flow past a cavity with L/d = 2. Conditions duplicated test conditions in experiments by Rossiter at Mach numbers varied from 0.6 to 1.2. The computational scheme was the USA 2D series code developed by Rockwell's Science Center with an algebraic turbulence model for the shear layer and recirculating region. Two physical conditions were simulated: an isolated cavity situated (1) in an infinite plane wall and (2) in an infinite channel with an opposing parallel wall. Computed results for (1) showed excellent agreement with Rossiter's measured amplitudes and frequencies. A tuned acoustic duct resonance effect was observed in (2), demonstrating a controlled change in the acoustic feedback mechanism and resultant amplification in computed oscillations.

Dougherty, N. Sam↗
NASA NTRS1986

A spectral multi-domain technique with application to generalized curvilinear coordinates

Spectral collocation methods have proven to be efficient discretization schemes for many aerodynamic and fluid mechanic problems. The high order accuracy and resolution shown by these methods allows one to obtain engineering accuracy solutions on coarse meshes, or alternatively, to obtain solutions with very small error. One drawback to these techniques was the requirement that a complicated physical domain must map into a simple computational domain for discretization. This mapping must be smooth if the high order accuracy and expontential convergence rates associated with spectral methods are to be preserved. Additionally even smooth stretching transformations can decrease the accuracy of a spectral method, if the stretching is severe. A further difficulty with spectral methods was in their implementation on parallel processing computers, where efficient spectral algorithms were lacking. The above restrictions are overcome by splitting the domain into regions, each of which preserve the advantages of spectral collocation, and allow the ratio of the mesh spacing between regions to be several orders of magnitude higher than allowable in a single domain. Such stretchings would be required to resolve the thin viscous region in an external aerodynamic problem. Adjoining regions are interfaced by enforcing a global flux balance which preserves high-order continuity of the solution, regardless of the type of the equations being solved.

Macaraeg, M. G.↗
NASA NTRS1989

New computing systems and their impact on computational mechanics

Recent advances in computer technology that are likely to impact computational mechanics are reviewed. The technical needs for computational mechanics technology are outlined. The major features of new and projected computing systems, including supersystems, parallel processing machines, special-purpose computing hardware, and small systems are described. Advances in programming environments, numerical algorithms, and computational strategies for new computing systems are reviewed, and a novel partitioning strategy is outlined for maximizing the degree of parallelism on multiprocessor computers with a shared memory.

Noor, Ahmed K.↗
NASA NTRSDate not supplied

Impact of Emerging Computing Architectures and Opportunities for Process Systems Engineering Applications

Moore’s “law” was the observation that the number of transistors in an integrated circuit doubled approximately every two years. This trend has distinctly failed to hold in recent years. The death of Moore’s law has left researchers and practitioners in the computational sciences searching for technologies to provide the speedups formerly supported by Moore’s law. Previously overlooked chip architectures and other computing technologies are now receiving more development resources. Critically, these technologies are gaining more mature software support, opening their adoption by researchers in algorithms and applications. In this article, we review some of these computing technologies, their relationship with various algorithms and applications, and their potential benefits (or pitfalls). We close with recommendations for future work by the process systems engineering community specifically.

Emerging hardware↗
NASA NTRS1987

Optimal pre-scheduling of problem remappings

A large class of scientific computational problems can be characterized as a sequence of steps where a significant amount of computation occurs each step, but the work performed at each step is not necessarily identical. Two good examples of this type of computation are: (1) regridding methods which change the problem discretization during the course of the computation, and (2) methods for solving sparse triangular systems of linear equations. Recent work has investigated a means of mapping such computations onto parallel processors; the method defines a family of static mappings with differing degrees of importance placed on the conflicting goals of good load balance and low communication/synchronization overhead. The performance tradeoffs are controllable by adjusting the parameters of the mapping method. To achieve good performance it may be necessary to dynamically change these parameters at run-time, but such changes can impose additional costs. If the computation's behavior can be determined prior to its execution, it can be possible to construct an optimal parameter schedule using a low-order-polynomial-time dynamic programming algorithm. Since the latter can be expensive, the performance is studied of the effect of a linear-time scheduling heuristic on one of the model problems, and it is shown to be effective and nearly optimal.

Nicol, David M.↗
NASA NTRS1996

Scalable Solutions to Integral Equation and Finite Element Simulations

The application of advanced computer architecture and software to a broad range of electromagnetic problems had allowed more accurate simulations of electrically larger and more complex components and systems...This paper overviews solutions to Maxwell's equations implicitly defined through systems of linear equations.

parallel↗
NASA NTRS2003

Parallel Subconvolution Filtering Architectures

These architectures are based on methods of vector processing and the discrete-Fourier-transform/inverse-discrete- Fourier-transform (DFT-IDFT) overlap-and-save method, combined with time-block separation of digital filters into frequency-domain subfilters implemented by use of sub-convolutions. The parallel-processing method implemented in these architectures enables the use of relatively small DFT-IDFT pairs, while filter tap lengths are theoretically unlimited. The size of a DFT-IDFT pair is determined by the desired reduction in processing rate, rather than on the order of the filter that one seeks to implement. The emphasis in this report is on those aspects of the underlying theory and design rules that promote computational efficiency, parallel processing at reduced data rates, and simplification of the designs of very-large-scale integrated (VLSI) circuits needed to implement high-order filters and correlators.

Gray, Andrew A.↗
NASA NTRS2001

Support for Debugging Automatically Parallelized Programs

This viewgraph presentation provides information on the technical aspects of debugging computer code that has been automatically converted for use in a parallel computing system. Shared memory parallelization and distributed memory parallelization entail separate and distinct challenges for a debugging program. A prototype system has been developed which integrates various tools for the debugging of automatically parallelized programs including the CAPTools Database which provides variable definition information across subroutines as well as array distribution information.

Hood, Robert↗
NASA NTRS1991

A biconjugate gradient type algorithm on massively parallel architectures

The biconjugate gradient (BCG) method is the natural generalization of the classical conjugate gradient algorithm for Hermitian positive definite matrices to general non-Hermitian linear systems. Unfortunately, the original BCG algorithm is susceptible to possible breakdowns and numerical instabilities. Recently, Freund and Nachtigal have proposed a novel BCG type approach, the quasi-minimal residual method (QMR), which overcomes the problems of BCG. Here, an implementation is presented of QMR based on an s-step version of the nonsymmetric look-ahead Lanczos algorithm. The main feature of the s-step Lanczos algorithm is that, in general, all inner products, except for one, can be computed in parallel at the end of each block; this is unlike the other standard Lanczos process where inner products are generated sequentially. The resulting implementation of QMR is particularly attractive on massively parallel SIMD architectures, such as the Connection Machine.

Freund, Roland W.↗
NASA NTRS2007

Parallel-Processing Software for Correlating Stereo Images

A computer program implements parallel- processing algorithms for cor relating images of terrain acquired by stereoscopic pairs of digital stereo cameras on an exploratory robotic vehicle (e.g., a Mars rove r). Such correlations are used to create three-dimensional computatio nal models of the terrain for navigation. In this program, the scene viewed by the cameras is segmented into subimages. Each subimage is assigned to one of a number of central processing units (CPUs) opera ting simultaneously.

Klimeck, Gerhard↗
NASA NTRS1989

Computational Methods for Structural Mechanics and Dynamics, part 1

The structural analysis methods research has several goals. One goal is to develop analysis methods that are general. This goal of generality leads naturally to finite-element methods, but the research will also include other structural analysis methods. Another goal is that the methods be amenable to error analysis; that is, given a physical problem and a mathematical model of that problem, an analyst would like to know the probable error in predicting a given response quantity. The ultimate objective is to specify the error tolerances and to use automated logic to adjust the mathematical model or solution strategy to obtain that accuracy. A third goal is to develop structural analysis methods that can exploit parallel processing computers. The structural analysis methods research will focus initially on three types of problems: local/global nonlinear stress analysis, nonlinear transient dynamics, and tire modeling.

Stroud, W. Jefferson↗
NASA NTRS1987

Flow physics

A discussion is presented on the coupling of computational analysis and experiment. It is believed that this coupling is critical in developing new aerodynamic insights. Additionally, new methods for analyzing and interpreting data are discussed. These methods need to be developed in small-scale research studies and then applied to large-scale technology programs. The specific objectives of this program are threefold: (1) provide definitive data sets for the assessment of numerical simulations to the Navier-Stokes equations; (2) incorporate advanced instrumentation to measure the spatial and temporal structure of fluid flows; and (3) develop true parallelism between computational and experimental research using the 'scientific workstation' concept. The discussion is presented in viewgraph form.

Davis, Sanford↗