Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface contamination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Effects of titanium nanoparticles on self-cleaning and structural features of zinc-magnesium-phosphate glass

Graphical abstract: Water contact angle for sample S2, S3, S4 and S5. The water contact angle increased with increased the titanium NPs content (mol%). - Highlights: • ZnO–MgO–P{sub 2}O{sub 5} embedded TiO{sub 2} NPs prepared by conventional melt-quenching method. • The amorphous nature is confirmed by X-ray diffraction spectroscopy. • The structural characteristics of glasses is investigated using FTIR and Raman. • Wettability of the glasses surface by water contact angle. - Abstract: The loss of glass transparency on surface pollutants contamination unless inhibited not only causes vision obscurity but also responsible for major aesthetic damages of cultural heritage. It is due to the sticking of fine dirt particles on wetting layers, a complex process with several possible ramifications still to be clarified. We report the influence of titanium dioxide or titania (TiO{sub 2}) nanoparticles (NPs) on the structural and self-cleaning properties of zinc–magnesium–phosphate glasses. Following melt-quenching method glass samples of optimized composition (42 − x)P{sub 2}O{sub 5}–8MgO–50ZnO–xTiO{sub 2} with x = 0, 1, 2, 3 and 4 mol% are prepared. XRD patterns verified their amorphous nature and TEM images revealed the nucleation of TiO{sub 2} NPs of average diameter ≈4.05 ± 0.01 nm. Fourier transform infrared (FTIR) spectra displayed four absorption band centred at 1618–3438 cm{sup −1}, 902– 931 cm{sup −1}, 757–762 cm{sup −1} and 531–560 cm{sup −1}. Raman spectra exhibited four peaks each accompanied by a blue-shift. Water contact angle is found to increase with the increase of titanium NPs concentration into the amorphous matrix. This knowledge can be used to set up strategies and selective treatments to preventing glass transparency loss via the modification of self-cleaning attributes.

36 MATERIALS SCIENCE↗

Panel Session 83: Development of the DOE Mercury Management Strategy

This panel discussion addressed the current efforts to develop an integrated strategy for managing the mercury (Hg) challenges across the DOE complex, including challenges in remediation of Hg contamination and related ongoing or planned technology development efforts across the EM complex. Panel members discussed opportunities for collaboration in defining and implementing a mercury management strategy for the various sites, national laboratories, and contractors and for all to provide technical information for DOE to develop an integrated, cost effective Hg management strategy. Emphasis of the panel was placed on challenges at the Oak Ridge Reservation and the Savannah River Site. Opening remarks were made by Ming Zhu. Ming stated that the Academy of Sciences recently released a report on the challenges of addressing Hg in the environment; the report leveraged recent remedial efforts. Presentations proposed include: 1 - Approach to Addressing Mercury at Y-12 (Brian Henry, US DOE OREM (USA)); 2 - Mercury Management Strategy (Renee Echols, FireWater Associates, LLC (USA)); 3 - Integration of Science to Address Mercury Clean-up Challenge (Eric Pierce, Oak Ridge National Laboratory (USA)); 4 - Mercury Related Research and Development by CRESP (Kevin Brown, Vanderbilt University - CRESP (USA)); 5 - Lessons Learned from D and D of West COLEX (Kent Fortenberry, UCOR (USA)); 6 - Mercury in the SRS Liquid Waste System (Richard Edwards, Savannah River Remediation (USA)); 7 - TDD Program on Mercury at Savannah River (Bill Wilmarth, Savannah River National Laboratory (USA))

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Examining the Effect of Plume Rise on Radiological Consequences of Nuclear Accidents

A nuclear accident could cause release of radioactive material outside containment. This material will eventually disperse into the surrounding environment, and could pose a serious threat to public safety, and environment. Mitigation of radiological consequences of such an accident is highly desirable, and since Fukushima accident, there has been a growing focus on nuclear utilities to develop capabilities for this purpose. Undoubtedly, suppression of radioactive material release and dispersion is the primary mean for mitigating radiological consequences nevertheless alternative methods should also be explored to broaden the spectrum of choices for actual circumstances. As we know that, dispersion of radioactive material and subsequent radiological consequences are affected by plume rise. Plume rise is an important factor in determining ground level contamination since it can increase effective release height appreciably provided that effluent discharge speed and temperature is high enough. Under most circumstances, one can expect reduction in radiological consequences due to lower levels of radiation dose and ground contamination in the presence of adequate plume rise. Nevertheless, the effect of plume rise is usually ignored in radiological consequence studies for the sake of conservatism, and lack of information. However, this particular attribute of plume rise interested us to investigate the effect of plume rise in the scope of consequence mitigation and how this advantage could be utilized during an accident progression to minimize the impact of radioactivity release to the environment. In this work, we examine the effect of plume rise on radiological consequences of a nuclear accident for plume rise contributions much larger ({approx}500 m) than usually achievable in normal circumstances. The effect of plume rise on radiological consequences is quantified in this study as decontamination credit (DCC) achievable corresponding to maximum annual dose. This analysis is performed for a number of release heights and atmospheric conditions. We discuss available results in the scope of radiological consequence mitigation, devising a strategy for utilizing plume rise phenomenon with the help of an external propelling device like a jet engine for radiological consequence management. This study is continuation of our efforts for devising systems and strategies to mitigate consequences of radioactivity release accidents like Fukushima. We have proposed several ideas for suppressing/preventing the dispersion of released radioactive material to the environment using offsite equipment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Study of an Unrefined Humate Solution as a Possible Attenuation-based Remedy for Uranium Contamination in Acidic Groundwater - 20351

The Savannah River Site (SRS), joined the environmental cleanup program in 1981 after the Cold War, and was designated as a hazardous waste management facility. About 1.8 billion gallons of acid wastes were disposed into the F/H Area Seepage Basin that included many radionuclides and dissolved metals, resulting in highly contaminated groundwater plumes with pH of 3 - 5.5. The acidity of the plumes contributes to the mobility of several constituents of concern (COC) such as H-3, U-238, I-129, and Sr-90 for the F-Area plume and H-3, Sr-90 and mercury for the H-Area plume. An active treatment (pump-and-treat and re-injection) system was constructed and put in place in 1997 to address the removal of metals and radionuclides from the contaminated groundwater. As remediation projects advanced, active treatments were transitioned to more passive or enhanced-passive approaches such as the subsurface barrier with base injection system, which has been controlling the mobility of contaminants. However, new and more efficient attenuation-based remedies are always sought. Several studies have proposed that humic substances can be used to remediate sites contaminated with heavy metals by creating a permeable reactive barrier. Humic substances (HS) are major components of soil organic matter. HS are polyfunctional organic macromolecules formed by the chemo-microbiological decomposition of biomass or dead organic matter. These substances are usually divided into three main fractions: humin (insoluble at all pH values), humic acid (soluble at pH greater than 3.5), and fulvic acid (soluble at all pH values). Humic substances are major components of the soil at SRS and, in addition, are also helpful in the removal process of uranium. This research focuses on uranium (VI), which is a key contaminant of concern in the F-Area groundwater plume. The interaction of uranium with sediment in the presence or absence of humic substances involves complex mechanisms that are not yet well understood. The interaction of U(VI) with humic substances can affect the adsorption of U on sediment, altering its mobility in the subsurface. The objective of this study is to study the mobility of uranium in the presence of humic acid and to determine if sediments amended by humic acid can enhance the sorption of heavy metals onto sediments. In this research, experiments were conducted using background (clean) F-Area aquifer sediments to understand and predict uranium mobility. A blended material, humate, containing both humic and fulvic acids and a chemically modified humate (KW15 modified humic or mod-HA) was studied as a possible amendment for uranium remediation in SRS groundwater. Batch experiments were conducted in triplicates using 20 ml of aqueous suspension in DI water containing SRS sediment and mod-HA and studied the effect of pH, kinetics of humate sorption onto SRS sediment and also studied the sorption of uranium onto mod-HA amended SRS sediment. Results indicate that mod-HA amended sediment increases uranium removal significantly. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Self-Navigating Robotic Assistant for Long-term Wide Area Floor Contamination Monitoring - 18213

For Routine Contamination Testing (RCT) of an operational nuclear facility or one undergoing Decontamination and Decommissioning (D and D), workers utilize specified travel corridors (enclosed hallways or areas designated with tape or rope in open spaces) to minimize the risk of spreading contamination. Radiation health technicians must continually monitor these areas for contamination to minimize worker dose and prevent its spread to uncontrolled areas. For many sites, it is impractical for the technician to adequately survey such areas. The Nuclear Robotics Group (NRG) at UT Austin has developed a self-navigating robotic platform equipped with radiation detectors to augment the technician to improve both survey coverage and frequency. While maintaining a controlled velocity and floor-to-sensor distance, the system takes radiation measurements to identify and/or localize contamination sources. Readings above background levels are reported to a remote workstation to allow technicians to then respond accordingly. The completion of these mundane tasks by a robot allows the trained technicians to focus instead on operational tasks, D and D, or responding to alarms. The robot generates a map using a Lidar range sensor with established Simultaneous Localization and Mapping (SLAM) techniques. Range data is then compared to previously generated maps for robot localization and autonomous navigation. To maximize coverage, the robot executes a Complete Coverage Path Planning (CCPP) algorithm using a static map that is discretized into cells to assure comprehensive yet efficient coverage. As the system executes the generated plan, it builds a radiation map of the area for the technician to validate and verify the results. If contamination is detected, the robot will minimize the spread of contamination by stopping, sounding an alarm, and alerting the remote technician. The proposed system allows for long-term deployment with minimal human intervention. It is robust to both highly dynamic obstacles (i.e. personnel) and low dynamic changes (i.e. temporally stored cart) in the environment. This is accomplished through continuous spatiotemporal updating of the static map, and the utilization of a supervisory controller that allows the system to reliably respond to unexpected events or states (i.e. low battery, closed door, etc.). While the supervisory controller can respond to temporary complications, the system also recognizes the environment can change slowly over time necessitating that the CCPP automatically be updated to account for observed 'permanent' changes to the environment. To do this, the robot uses intermediate probabilistic data to make intelligent planning decisions offline while still maintaining local reactive obstacle avoidance and safety features. The self-updating of the map allows the robot to run longer without the need to remake the map, leading to more consistent monitoring data and less maintenance from the human technician. This paper will review the current system hardware, the CCPP algorithm, the supervisory controller, the probabilistic algorithm for identifying permanent changes, and recent experiments at UT Austin to experimentally validate the reported sensor coverage. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

UAVs for Radiological Monitoring: Determining Ideal Operational Parameters From GEANT4 Simulations - 18025

Owing in no small part to the enormous advances in radiation detector technology (size, sensitivity and spectral-resolution), there has been an increased drive and requirement to accurately map both the spatial extent and magnitude of radiological contamination at the greatest possible spatial resolutions. To undertake this, a range of different methods have been devised and include the use of cars and human, but also planes (and more recently) unmanned aerial vehicles (UAVs). However, critical to the remote sensing using such UAVs in contrast to ground-based sensing, is (i) the selection of the ideal operational parameters to attain the best on-ground resolution in addition to, (ii) understanding the correct normalisation procedures and other influences on results that surveys at these reduced altitudes might present. Resulting from earlier works, through employing combined modelling and experimental data, the optimal height for a UAV survey using the more realistic 'area' radioactive source term (opposed to an infinitely-small 'point-source') is determined to be approximately 5 m - suitably maximizing cross detector counts. At greater altitudes than this, the influence of variations in neighboring topology / topography and nearby structures are observed to be negligible. However, at this and further-reduced altitudes (where optimal count-rates exists), small height-related variations are observed to result, and impact considerably on the complexity of the data normalisation. Whilst not occurring as a tool to entirely replace ground-based surveys, UAV systems are able to perform in challenging or dangerous environments, inadvisable or problematic to send humans. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

In-situ Detection of Glovebox Glove Degradation Prior to Glove Failure; Effects on Safety, Waste, and Operational Costs - 20402

Glovebox glove pressure decay leak testing and analysis of the data can greatly improve glovebox safety, minimize Transuranic (TRU) glove waste, and minimize operational cost. It is well known, the weakest point of containment on a glovebox is the glove. Mitigating unplanned openings in gloves is critical to minimizing operational and safety costs in glovebox operations. Mitigating unplanned glove openings due to glove failures will be discussed in this paper. The lack of an engineered solution to determine a gloves operational life in nuclear operations, has lead to use of theoretical and manual subjective methods to determine the life and safety of a glovebox glove. Whether the glove is inspected visually prior to use, or gloves are changed regularly to theoretically avoid failure, both the operators PPE and the room are being exposed to contamination, or un-necessary amounts of TRU glove waste are being generated. Millions of dollars yearly in operational costs are spent on glove failures due to loss of production, incident analysis, regulatory audits, clean up, and paperwork. In a nuclear application, a glove failure could contaminate an operator and laboratory, shut down the operation for weeks, potentially create a regulatory audit, and potentially create a media frenzy; the damages to the organization can be astronomical. Elimination of glove failures is possible by tracking glove material degradation and setting limits to allow glove change when it becomes necessary, prior to glove failure. Analytical pressure decay leak testing allows the detection of material degradation, and in turn the ability to limit operational glove failures. A German based company called MK Versuchsanlagen, e.K., has developed an advanced Glove Integrity Testing System. The system, with its use of proprietary RFID and special software technology, is unique in its capabilities. The system is capable to perform highly accurate regular glove testing on any size glovebox line in minimal time. The system records and can analyze a tremendous amount of system data that in turn can determine, for example, a safe glove change time prior to a glove material failure. This paper will show how an advanced Glove Integrity Testing System can detect glove material degradation and help determine a safe change point prior to glove failure. Pressure decay curves of new gloves and recorded effects of accelerated aging on the glove over time will be shown. The use of this technology in nuclear facilities can greatly improve glovebox operational safety, minimize glovebox glove TRU waste, and save organizations tremendous costs in downtime, clean up, documentation, and potential regulatory review. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Depth of the Biologically Active Zone in Terrestrial Habitats at the Chalk River Laboratories Site: Implications for Contaminated Site Assessment and Ecological Risk Assessment - 19272

Plants, soil invertebrates and burrowing mammals penetrate the soil layer to varying depths. As Canadian Nuclear Laboratories (CNL) assesses risks and remediates soils contaminated with radioactive and other hazardous wastes at the Chalk River Laboratories (CRL) site, a site-specific characterization of the biologically active zone is required to help to identify the relevant depth in soil for exposure assessment of ecological receptors. A defined biologically active zone is also required to determine the depth to which remedial actions should be taken to protect the environment, help prioritize locations for remediation efforts based on ecological risk and avoid unnecessary cleanup efforts. By taking advantage of the abundance of information on contaminant locations and depths, biodiversity, and hydrogeology available for the well-studied CRL site, it is possible to produce a site-specific estimation of the biologically active zone in CRL upland soils. A literature review was conducted to determine rooting and burrowing depths for vascular plants, soil invertebrates and burrowing mammals documented to be present (or potentially present) on the CRL site. This literature review was supplemented with field surveys to fill data gaps in our understanding of species composition (e.g., soil invertebrates and plant understory). Overall, we found that there was significant variability in maximum rooting/burrowing depths among plant, mammal and invertebrate species present on the CRL site. The majority of biological activity occurs in the top 0.5 m of soil. However, about 19% of burrowing or rooting receptors present at CRL may be in contact with soils up to 1 m depth, 9% of receptors present may be in contact with soils up to 2 m depth, and only about 2% of receptors may be in contact with soils up to 3 m depth. It is highly unlikely that any ecological receptor present at CRL is in direct contact with soils deeper than about 3.6 m. Further site-specific results pertaining to burrowing and rooting depths estimated for the CRL site will be presented, and these results will be compared to generic/default 'depth of biologically-active layer' guidelines recommended by various agencies. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Value Based Decision Approach to Help Inform Waste Management Guidance for VLLW Following an RDD Detonation - 19510

The detonation of a radiological dispersal device in an urban environment or similar large-scale radiological event has the potential to spread radioactive contamination over a large area. The resulting effort to clean up and dispose of this waste will involve input and coordination from a wide variety of stakeholder groups, especially if the waste crosses municipal and state boundaries. Guidance designed to help effectively and safely deal with the wastes generated from incident cleanup will need to navigate the intersection of stakeholders at the local, regional, and national levels. At the same time, the sheer size of such a cleanup effort and the volumes of wastes generated will require innovative and potentially novel solutions compared to current Low-Level Radioactive Waste disposal practices. A structured decision-making approach incorporating value-focused thinking is one method that could be employed to help build stakeholder confidence in a given cleanup guidance strategy and documentation. This approach would help ensure that all stakeholder perspectives were accounted for in a given decision situation and to promote transparency in the decision-making process. This paper will discuss research into the role and development of a public stakeholder tool used to gather input from relevant stakeholders in order to help inform cleanup and disposal guidance of Very Low-Level Radioactive Waste following a radiological disaster. This tool is being designed to draw on aspects of value-focused decision making. Case studies from two prominent recent events will be discussed to illustrate some of the key issues that could benefit from such an approach to stakeholders. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Magnetite Dissolution using Hydrazine-Acid Solution for Chemical Decontamination

Chemical decontamination is committed to giving safe decommissioning of nuclear facilities as well as maintenance during the normal operation under sufficiently reduced radiation field. The removal of radioisotopes from the primary coolant system of nuclear power plant takes place with the dissolution of metal oxide layer. Dissolution of metal oxides in aqueous acidic solutions is primarily controlled by the protonation of metal-oxygen bonding to release the metal ions from the oxide lattices but in the presence of reducing or chelating agents dissolution is often facilitated by the enhanced mass transfer of metal ions together with chelating reagents as well as metal reduction to soluble state such as insoluble ferric ions to soluble ferrous ions of hematite. The mechanisms and kinetics related to the metal oxides dissolution in varied acidic reagents have been reported for many decades even though a general picture of dissolution is not available due to the peculiarity of each oxide in structure, stability of metal ions, solubility, and reactivity. In a number of experimental results and practical reports, organic acids such as oxalic acid, citric acid, ascorbic acid, malonic acid, thioglycolic acid, etc. were used as solvent reagents and many other literatures reported the effectiveness of the chelating agents in dissolution rate such as iminodiacetic acid (IDA), diethylene triamine pentaacetic acid (DTPA), nitrilo triacetic acid (NTA), and ethylenediaminetetraacetic acid (EDTA) by the sorption of dissolved metal ions forming stable metal chelates. Also reductive dissolution by the addition of reducing reagents such as hydrazine, vanadium as well as organic acids was reported with effective experimental results. However, organic acids and chelating ligands are often problematic on the safety of radioactive wastes. Organic compounds in a repository potentially form a complex with radionuclides, which increases the mobility of radionuclides and consequently increases the probability of the radioactive contamination of groundwater. Furthermore oxalic acid can cause a severe intergranular attack (IGA) to the type 304 stainless steel. Therefore, the use of organic acids or chelating reagents even though those effects to the dissolution performance is much greater than other chemical components must be minimized or carefully determined with appropriate treatment processes. Alternatively dissolution accommodated by inorganic reducing reagents or catalysts in inorganic acid solutions have been extensively studied for the feasible dissolution outcomes. The mixture of sulfuric acid and sulfurous acids as a dissolution media was reported to increase dissolution rate due to the effect of protonation by H{sub 2}SO{sub 4} and reducing effect of H{sub 2}SO{sub 3}. The increased dissolution of magnetite was also found in sulfur dioxide solution containing copper ions because SO{sub 2} plays as a reducing catalyst to form FeHSO{sub 3}{sup +} with Fe(III) from iron oxides and accordingly the concentration of Fe(III) ions decreases to accelerate the iron oxide dissolution. The present study is concerned with the feasibility of not using the organic compounds for the dissolution of oxide layers. We propose an acidic solution containing sulfuric acid, hydrazine, and copper ions for the effective dissolution of magnetite powders. The effects of both hydrazine and copper ions as a reducing agent and a catalyst respectively to promote the reducing power, as well as temperature will be investigated on the dissolution of magnetite powder. (authors)

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

History of Ultrasonic Inspection of High-Level Waste Tanks at SRS - 20220

The Liquid Waste Disposition Projects (LWDP) Structural Authority and Inspection Engineering Support Group has teamed with the Materials Science and Technology Non-destructive Evaluation Group of Savannah River National Laboratory (SRNL) to implement a comprehensive In-Service Inspection (ISI) program for the High-Level Waste (HLW) tanks in the sites tank farms. The purpose of this program is to demonstrate the structural and leak integrity of the tanks to maintain the function of waste containment throughout the desired service life. Four types of waste tanks were constructed at Savannah River Site (SRS) from 1951 thru 1981 to store radioactive nuclear waste from the separations process. The Type I, II and III are carbon steel cylindrical tanks with varying degrees of access to the side walls and very limited access to the tank bottom. The tanks contain 750,000 to 1.3 million gallons of waste and are buried or backfilled with soil. The tanks are 75'-85' in diameter and 24'-33' from tank bottom to the tank roof. Inspection of the HLW tanks is made difficult by radiation, contamination, and small access openings. Through the years these challenges have been overcome by progressive improvements to programs and equipment resulting in the sophisticated wall crawler Ultrasonic Testing (UT) technology of today. A formal inspection program was developed and put in service in 1972. UT thickness measurements were first made in 1967 and 1969 of selected waste tanks using an analog-type instrument to measure the thickness of the carbon steel walls. Routine inspections for thinning were performed from 1972-1985 and then discontinued because no thinning had been observed and this technique could not detect pitting or cracking. UT inspections resumed in 1994 using a sophisticated robotic wall crawler with UT technology capable of detecting thinning, cracking and pitting. The current program focuses on the newer Type III tanks that are used primarily for storage. The program was upgraded in 2003 to include selected regions of the tank wall, secondary wall and annulus floor on a 7 to 10-year frequency. The facility is currently in its third cycle of tank inspections. Thus far, there have been no reportable indications of service induced degradation. This result provides assurance that the chemistry control program has been effective at mitigating corrosion and that the tanks remain structurally sound even after more than 40 years of service. This paper will present the UT technology first used at SRS and the evolution to the current systems and their capabilities. Additionally, plans for equipment upgrades that will improve the extent of inspection will be discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Regulatory Consideration on Decommissioning Facilitation of Nuclear Power Plants In Korea

As the number of decommissioning NPPs worldwide increases, the necessity of decommissioning feasibility design at the initial design/construction stage of NPP is emphasized. Also as demand for NPP decommissioning increase, the generation of large amount of radioactive waste and environment contamination are expected. Based on the decommissioning experiences of nuclear facilities, it is recognized that the specific design and operational procedure are essentially required to minimize the radioactive waste generation and radiation exposure during decommissioning. Recently the legal framework of decommissioning in Korea was enhanced through the revision of Nuclear Safety Act (NSA) and its subordinate status in 2015. On the other hand, the Korean first NPP, Kori unit 1, will be scheduled permanently shut-down in mid-2017. The Korean regulatory body have experience for decommissioning of small-sized nuclear facilities like research reactors and nuclear fuel cycle facility. However we have no experience on decommissioning of NPP in Korea. Therefore the comprehensive and systematic technical standards and guidelines on safety review and inspection should be required for the Korean first case on decommissioning of NPP. According to the revised NSA, NPP operators in Korea should submit the decommissioning plan (DP) for the permanent shut-down NPP as well as the existing operating NPPs. The operator shall prepare and submit the design features and measures for decommissioning facilitation as one of DP items and regulatory body shall review the feasibility of decommissioning. Therefore the safety review guideline for those decommissioning facilitation should be required. In this paper, we studied the overseas safety requirements, design features and operational procedures for decommissioning facilitation. Through the overseas survey results, the regulatory position and major management plan were proposed for development of detailed implementation guideline on decommissioning facilitation of NPPs in Korea.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

FUSRAP Data Management and Information Transitions - 19459

The Formerly Utilized Sites Remedial Action Program (FUSRAP) was created in the mid-1970's to clean up radiological contamination resulting from early development of nuclear weapons. The US Department of Energy (US DOE) was responsible for FUSRAP until October 1997, when Congress transferred administration and execution of FUSRAP site cleanup to the US Army Corps of Engineers (USACE). Currently, the US DOE Office of Legacy Management (LM) determines the eligibility of a site for referral to USACE. USACE determines whether the site is included in FUSRAP for cleanup, conducts remedial actions, and transfers sites back to LM for long-term surveillance and maintenance (LTS and M). LM and USACE established the Data Management Working Group (DMWG) to (1) establish a common understanding of US DOE and USACE district-specific data, records practices, and requirements as they apply to FUSRAP programmatic documents for site transition and transfer; (2) establish methods to ensure accurate data transfer; and (3) develop a timeline for data and records transfer. These methods will ensure continuity of stewardship while transitioning from cleanup to LTS and M and beyond as more FUSRAP sites transfer from USACE to LM. The DMWG has met monthly and the meetings are attended by a wide range of LM and USACE project managers and subject matter experts. Discussion topics have addressed site records management, including data needs and uses; transfer and posting of Administrative Record and Permanent Record files for public accessibility; and management of legal and classified files. There have been a number of group successes, including the following: - Establishment of a common understanding of data and records practices and requirements as the sites transition and transfer from USACE to LM; - Development of effective lines of communication between USACE and LM concerning data management for transition; - Establishment of a cohesive approach to data management between the two agencies. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Lessons Learned from Hanford's Purex Tunnel 2 Structural Stabilization Project - 20509

In 2019, U.S. Department of Energy (DOE) contractor CH2M Hill Plateau Remediation Company (CHPRC) completed structurally stabilizing the Plutonium Uranium Extraction Plant (Purex) waste storage Tunnel 2 with engineered grout. This action significantly reduced risk to Hanford workers, the surrounding community and environment by preventing future collapse of the tunnel and possible release of radioactive materials. Decades of plutonium production at the Purex facility required construction of two large underground tunnels for storage of highly contaminated plutonium processing equipment that had failed during the operation of Purex and other facilities across the Hanford Site. Following the partial collapse of Purex Tunnel 1 on May 9, 2017, DOE and CHPRC took immediate action to safely stabilize the collapsed section of the tunnel. The hole in the tunnel was filled the next day as a temporary stabilization measure, and no contamination was detected as a result of the partial collapse of the tunnel. Workers then stabilized Tunnel 1 in its entirety by filling with engineered grout, which also encapsulated the radioactive equipment and railcars within the tunnel. Grouting eliminated the risk of further collapse and stabilized the tunnel contents, all while not precluding future remedial actions or final closure decisions. While conducting an integrity analysis of Tunnel 1 by using construction drawings, photos and other historical documents, project teams also analyzed the much larger Purex Tunnel 2. The analysis found Tunnel 2 did not meet current codes for structural integrity, and it may not be able to bear the weight of the soil above the tunnel. Therefore, it was determined that Tunnel 2 was also at risk of collapse. DoE's independent panel of experts determined grouting to be the best choice for stabilizing Tunnel 2 because it provides the highest level of stability and protection, and does not preclude future remedial actions. DOE authorized CHPRC to commence work and the Purex Tunnel 2 Structural Stabilization Project was launched in December of 2017. The paper will discuss the process of recognizing the following critical aspects and risks associated with stabilizing Tunnel 2, and the actions taken by the project team to mitigate these risks, including: - Tunnel investigation and data collection to assist with future remediation; - On-site batching and mock-ups to provide the large quantity of grout required for stabilizing the tunnel; - Workforce involvement and innovative actions that mitigated the project's most significant potential hazards, including traffic control; - Project team high level of execution translated into successful project execution. Sharing lessons learned from this critical risk-reduction effort can enhance the safety and efficiency of other complex and hazardous projects across the DOE complex. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Investigating the Effect of Sorbed Humic Acid on the Mobility of Uranium - 19461

The Savannah River Site (SRS) was one of the major nuclear facilities for the U.S Department of Energy. During the Cold War, these facilities produced large amounts of radioactive and hazardous waste. On site, the F-Area consisted of three unlined seepage basins that collected approximately 6.8 billion liters of low-level waste that contained nitric acid, radionuclides, and dissolved metals due to plutonium separation operations. Sufficient quantities of uranium isotopes, I-129, Tc-99, and tritium migrated into the groundwater, creating an acidic plume with a pH between 3 and 5.5. Although the basins functioned as designed, the acidic nature of the waste created a source of contamination for the groundwater and soil below the basins. With radionuclides above their maximum contaminant level (MCL) remediation efforts took place. Humic acid as a remediation technology has shown potential for controlling radionuclide mobility. Humic acid is a fraction of humic substance that are ubiquitous in the environment. Humic substances (HS) are complex heterogeneous mixtures of polydispersed materials formed by biochemical and chemical reactions during the decay and transformation of plant and microbial remains. Humic substances account for 50-80% of the organic carbon in the soil or sediment and are known for their excellent binding capacity for metals. Humic acid can be extracted with a potassium hydroxide base solution and then drying it. The high pH solubilizes the humic acid molecules and generates a dark-brown highly-concentrated solution, rich in humic acid, which can be diluted for use. Humic acid's strong sorption capacity and its ability to develop a bond with uranium at slightly acid pH constitute it as remediation technology to reduce uranium (VI) mobility. Column experiments were performed to identify the sorption and desorption of HS in flow-through porous media representative of the acidic aquifer at the F-Area Seepage Basins. Two commercially available HA were selected for comparison, Huma-K and KW15 modified humics (modified humic acid, mod-HA). By conducting a nonreactive rhenium tracer test, on columns filled with soil obtained from SRS's FAW-1 at a depth interval of 18 m -21 m, column parameters such as pore volume (PV), variance, dispersion and peclet number were determined. Columns were then used to estimate the influence of HA on uranium mobility. Data obtained from this study shows that using HA as an amendment for uranium remediation improves uranium removal significantly. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mechanical Properties of Permanent Foaming Fixatives for Deactivation and Decommissioning Activities

DOE-EM have identified an operational requirement for a fixative that can immobilize and/or encapsulate residual contamination in 3D void volumes (pipes, gloveboxes, waste containers, etc.) during D and D activities. Failure to safely and effectively immobilize residual contamination can: Put workers at risk, Contaminate the public and environment, Drive up operational costs. Commercial-off-the-shelf (COTS) polyurethane (PU) foams is one possible solution and is currently being investigated in collaboration with Savannah River National Lab (SRNL). Mechanical property testing will dictate how well PU foams can withstand physical stressors outlined in safety documents while immobilizing residual contamination. Results can provide a performance criteria for Section 5 of ASTM E3191: Standard Specification for Permanent Foaming Fixatives Used to Mitigate Spread of Radioactive Contamination. Polyurethanes consists of repeating units of urethanes which are produced from an exothermic reaction between a polyol (an alcohol with two or more hydroxyl groups in a molecule) and an isocyanate [2]. PUs consists of 3D cells that are formed by a blowing agent which is normally water. Water interacting with the isocyanate creates carbon dioxide and urea which contributes to cells' growth and expansion. The cross-linking between the polyol and isocyanate solidify the cell faces and walls. Micro scale properties that can influence mechanical properties include: Relative density (ratio between density of cellular material and density of the solid of which the cell walls are made of). Cells connectivity between edges and faces, and number of cells contact neighbors [3]. Whether a foam is open-celled or closed-celled. Closed-celled foams have a thin membrane that encloses each cell which can contribute to the stiffness of the foam. Incorporating fillers in the PU matrix like carbon-based nanoparticles in the form of expandable graphite (EG) can increase the thermal and mechanical performance [4]. When exposed to heat, EG produces a char layer that prevents heat and oxygen transfer which is known as intumescing. Mechanical performance is dependent on amount of EG loading since the cell sizes are linearly dependent on it. Overall, the rigid foams (I-R2) proved superior. SEM Analysis: I-R2 had the most consistent spherical sizes (average cell diameter: 489 μm), which enhance the relative density the most [5]. Tensile Testing Results: I-R2 experienced the largest breaking load (103.65 lbf) and stress (289.42 psi). I-R2 also had a higher Young's Modulus compared to R1 (2.99 ksi to 2.09 ksi). Compression Testing Results: I-R2 had the highest stress at 80% deflection (360.67 psi), load (1387.48 lbf) and modulus (3.92 ksi)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Applications of Intumescent Technologies in Support of D and D Activities across the DOE Complex - 19599

The development of intumescent technologies to be used as both an excellent means of fire protection and resiliency and as a radioactive fixative, would most definitely benefit the safety of the general public and also the environment. The remediation and safe disposal of radioactive waste is of great important to both national security and the public health, as we carry the responsibility to not develop new ways of mitigating these hazards but also to lay the groundwork for future generations. The overall goal of this research is to enhance the fire resiliency and protection of fixatives and nuclear facilities in support of D and D activities. Specific objectives include: 1) identify and evaluate commercial-off-the-shelf (COTS) intumescent technologies, 2) conduct baseline fire testing of intumescent technologies, 3) develop a set of international standards to meet operational and safety requirements for D and D Technologies. In order to evaluate the above proposed research objectives, the following hypotheses have been postulated. - Select, test, and evaluate the suitability of certain 'near fit' ASTM flammability standards. - Baseline and down-select a set of existing COTS intumescent technologies (coatings and foams) to support D and D problem sets. - Determine feasibility of application methods for use inside a radioactive glovebox and hot cells for D and D purposes. - Develop international testing protocols for adapting the use of intumescent technologies to address needs of the D and D process. The proposed research will primarily take place at FIU-ARC. ARC and SRNL have conducted extensive coordination with the Savannah River Site's (SRS) 235-F PuFF facility personnel to facilitate planning in order to expedite the research and development (R and D) related to this effort. An initial set of documents associated with the specific facility hot cells, including schematics, assessment of the manipulator arms, anticipated particulate sizes of the Pu-238 contamination, an approved tooling list, etc., were formally reviewed and approved for release by the site to ARC. Utilizing these as a foundation, pre-planning for further adaptation of the intumescent technologies and the application during a full-scale cold demo at a hot cell testbed at ARC. One of the primary objectives is the testing and evaluation of the resistance of radiological shielding foams to thermal stressors. This objective was accomplished by conducting a flammability test and incremental temperature test. The goal of the flammability test is to conduct analytical tests to provide a classification for the foams as outlined below in accordance with IEC 60695-11-10. This test method is uniformly accepted throughout the industry as being critical indicators that quantifiably establish the flammability characteristics of plastics. It should be noted that polyurethane is not classified as a plastic, however, they do share similar properties deeming this a near fit test. IEC 60695-11-10:2013 specifies small-scale laboratory test procedures intended to compare the burning behavior of different materials when vertically or horizontally oriented test bar specimens are exposed to a small flame ignition source. Two test methods are described. Method A is a horizontal burning test and is intended to determine the linear burning rate of materials under specific test conditions. Method B is a vertical burning test and is intended to determine whether materials self-extinguish under specific test conditions. The purpose of the incremental temperature testing is to evaluate mass loss and dimensional changes that occurs to the radiological shielding foams when exposed to high temperatures in a muffle furnace. High temperatures often cause materials to undergo physical changes such as swelling or expanding. This is caused by the increase in kinetic energy and atomic and molecular movement.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Bioaugmentation of an Engineered Metal Treatment Wetland with Cupriavidus SRS

There are many chemical methods to remediate copper (Cu) from the environment. However, the use of microorganisms has been identified to be cheaper and more efficient in remediating toxic compounds in a method known as bioremediation. A microorganism, Cupriavidus SRS, is a metal resistant, rod shaped, gram negative bacteria that was isolated from a location with heavy metal contamination. As a predator this isolate has the ability to attack gram-negative and gram-positive bacteria. It is highly tolerant to Cu, and the isolates growth initiation is stimulated by Cu. Wang et al. (2015) determined that efflux pump activity is one of the most important mechanisms of heavy metal tolerance and the Cupriavidus genus demonstrates this behavior. In this study, Cupriavidus SRS will be inoculated to sediment and water from an area with high concentrations of Cu and zinc, to determine the ability of the isolate to grow and survive in a high level Cu wetland as well as the bioremoval efficiency. The H-02 wetland in the AL1 outfall area is an engineered wetland that was constructed to utilize natural processes associated with sediments and microbial communities to remove contaminants from waste waters at the Savannah River Site. Specifically, this wetland treats the building processes and runoff form the Tritium Processing Facility in H-area to prevent Cu and Zn from entering the water before the contaminants go in the Savannah River. Distributions of Cu and Zn follow organic matter levels with higher densities along the shoreline showing that metal concentrations correlate with organic matter content. Cupriavidus SRS Growth: Cupriavidus SRS was isolated at the Savannah River Site from an area with heavy metal contamination. Cultures were grown in R2A medium at 25 deg. C and shaken at 80 rpm for liquid cultures for 5 days. Sediment and Water Collection: All samples were collected from the AL1 Outfall area within the Department of Energy's Savannah River Site. Sediment cores, organic layer samples, and water samples were collected from the Inlet and Outlet cells in triplicate. Only water samples were collected from the basin. Cell Pellet: After centrifugation at 10,000 RPM for 10 minutes the supernatant was removed. 1 mL of phosphate buffer saline was added to the tube, vortexed, and recentrifuged. Inoculation of Sediment and Water: All samples were done in triplicate, vortexed after inoculation, and put on the shaker for 72 hours. Day 0 begins when the samples are removed from the shaker. Experimental Set-Up: All samples were done in triplicate. All sediment samples were centrifuged at 7500 RPM for 10 minutes on Day 0 and Day 5. All the sediment and water samples were filtered with a 0.2 μm nylon filters to obtain approximately 10 mL of supernatant on Day 0 and Day 3. pH was taken 24, 48, and 72 hours after the samples had been on the shaker. Plate Count: Plate counts were done on Day 0 and Day 3 to determine Cupriavidus SRS growth following a quantitative counting method from Seely et al. (1972). This project is ongoing and the goal is to determine if Cupriavidus SRS has the ability to uptake excess Cu out of the environment. These could be some possible results for the experiment: - The isolate uptakes too much Cu, dies, and releases Cu back into the environment. - The isolate is able to uptake Cu, continue to live, but chemically changes the environment introducing new problems. - The isolate is able to uptake Cu, continue to live, and does not disrupt the environment with toxic chemical changes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗