Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sorting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Microdunes and other aeolian bedforms on Venus - Wind Tunnel simulations

The development of aeolian bedforms in the simulated Venusian environment has been experimentally studied in the Venus Wind Tunnel. It is found that the development of specific bedforms, including ripples, dunes, and 'waves', as well as their geometry, are controlled by a combination of factors including particle size, wind speed, and atmospheric density. Microdunes are formed which are analogous to full-size terrestrial dunes and are characterized by the development of slip faces, internal cross-bedding, a low ratio of saltation path length to dune length, and a lack of particle-size sorting. They begin to develop at wind speeds just above saltation threshold and evolve into waves at higher velocities. At wind speeds of about 1.5 m/sec and higher, the bed is flat and featureless. This evolution is explained by a model based on the interaction of alternating zones of erosion and deposition and particle saltation distances.

Greeley, R.↗

Disturbance-wave interactions in flows with crossflow

The leading-edge region of swept wings is dominated by the crossflow instability, resulting in vortices that all rotate in the same sense. The effect of these possibly unsteady vortices on the behavior of other disturbances is examined, and a strong interaction between these and disturbances of half the dominating crossflow wavelength is predicted. According to theory, the interaction is of crossflow-crossflow type. The effect explains the anomalies found in the experimental observations of Saric and Yeates. Visually, they observe vortices at the wavelength predicted by linear theory; however, in their hot-wire measurements they find that the superharmonic dominates disturbance growth, eventually having three times the amplitude of the primary wave. In this case, the usual transition prediction methods would fail, clearly indicating the importance of studying interactions of this sort.

Reed, H. L.↗

A comparison of precipitating electron energy flux on March 22, 1979 with an empirical model - CDAW 6

Data recorded by Defense Meteorological Satellite Program, Tiros and P-78-1 satellites for the CDAW 6 event on March 22, 1979, have been compared with a statistical model of precipitating electron fluxes. Comparisons have been made on both an orbit-by-orbit basis and on a global basis by sorting and binning the data by AE index, invariant latitude, and magnetic local time in a manner similar to which the model was generated. It is concluded that the model flux agrees with the data to within a factor of two, although small features and the exact locations of features are not consistently reproduced. In addition, the latitude of highest electron precipitation usually occurs about 3 deg more poleward in the model than in the data. This discrepancy is attributed to ring current inflation of the storm time magnetosphere.

Simons, S. L., Jr.↗

Equivalent absorption coefficients generated from frequency probability distributions

A flexible and computationally accurate method of treating aerosol scattering in spectral regions in which gaseous absorption is important is described. In the method, line-by-line absorption coefficients are computed as a function of pressure, temperature, and absorber gas for the spectral region of interest. The coefficients are sorted into a probability distribution which is converted into a cumulative probability distribution, which in turn can be inverted due to its monotonic nature. The inverted distribution is a smooth curve giving the absorption coefficient as a function of an independent variable on the domain. The frequency integration of the radiative transfer equation can then be performed by a quadrature technique with values of the absorption coefficient determined from the inverted distribution curve. The method is illustrated by applying it to the 9.6 micron band of ozone.

Ackerman, T. P.↗

Pfaffian systems and feedback linearization/obstructions

The concept of Cartan-Vessiot filtered Lie algebra/module is defined in terms of previous feedback linearizations constructed through canonical forms of Pfaffian systems associated with nonlinear systems. Nonlinearization/Cartan-Vessiot algebras are regarded as deformations of linear ones. It is shown how certain problems of interest in nonlinear system theory translate over to algebraic problems involving this sort of algebraic structure.

Hermann, R.↗

Frame-Synchronization-Assisting Module

Auxiliary data processor does computations related to synchronization of frames of telemetry data, relieving main processor of task. Called frame-synchronization-assisting module (FSAM), sorts through large amounts of data to determine whether valid and how configured. Module connected to main processor of computer through direct-memory-access (interface) module. Examines data in computer memory to find frame-synchronizing codes.

Desilveira, C.↗

Impact of GRM: New evidence from the Soviet Union

Gravity information released by the Soviet Union allows the quantitative assessment of how the geopotential research mission (GRM) mission might effect the ability to use global gravity data for continental tectonic interpretation. The information is of an isostatic response spectra for eight individual tectonic units in the USSR. The regions examined include the Caroathians, Caucasus, Urals, Pamirs, Tien-Shan, Altal, Chersky Ridge, and East Siberian Platform. The 1 deg x 1 deg gravity data are used to calculate the admittances are used in two different sorts of tectonic studies of mountain belts in the USSR: (1) interpretation of isostatic responses in terms of plate models of compensation for mountainous terrain. Using geologic information concerning time of the orogeny, lithospheric plates involved, and polarity of subduction in collision zones, they convert the best-fitting flexural rigidity to an elastic plate thickness for the lithospheric plate inferred to underlie the mountains; the isostatic admittance functions is an attempt to directly model gravity and topography data for a few select regions in the Soviet Union. By knowing the value of the expected correlation between topography and gravity from the admittances, the Artemjev's map in mountainous areas can be calibrated, and the maps are converted back to Bouguer gravity. This procedure is applied to the Caucasus and southern Urals.

Mcnutt, M.↗

Does the geoid drift west?

In 1970 Hide and Malin noted a correlation of about 0.8 between the geoid and the geomagnetic potential at the Earth's surface when the latter is rotated eastward in longitude by about 160 degrees and the spherical harmonic expansions of both functions are truncated at degree 4. From a century of magnetic observatory data, Hide and Malin inferred an average magnetic westward drift rate of about 0.27 degrees/year. They attributed the magnetic-gravitational correlation to a core event at about 1350 A.D. which impressed the mantle's gravity pattern at long wavelengths onto the core motion and the resulting magnetic field. The impressed pattern was then carried westward 160 degrees by the nsuing magnetic westward drift. An alternative possibility is some sort of steady physical coupling between the magnetic and gravitational fields (perhaps migration of Hide's bumps on the core-mantle interface). This model predicts that the geoid will drift west at the magnetic rate. On a rigid earth, the resulting changes in sea level would be easily observed, but they could be masked by adjustment of the mantle if it has a shell with viscosity considerably less than 10 to the 21 poise. However, steady westward drift of the geoid also predicts secular changes in g, the local acceleration of gravity, at land stations. These changes are now ruled out by recent independent high-accuracy absolute measurements of g made by several workers at various locations in the Northern Hemisphere.

Backus, G. E.↗

Development and testing of tip devices for horizontal axis wind turbines

A theoretical and field experimental program has been carried out to investigate the use of tip devices on horizontal axis wind turbine rotors. The objective was to improve performance by the reduction of tip losses. While power output can always be increased by a simple radial tip extension, such a modification also results in an increased gale load both because of the extra projected area and longer moment arm. Tip devices have the potential to increase power output without such a structural penalty. A vortex lattice computer model was used to optimize three basic tip configuration types for a 25 kW stall limited commercial wind turbine. The types were a change in tip planform, and a single-element and double-element nonplanar tip extension (winglets). A complete data acquisition system was developed which recorded three wind speed components, ambient pressure, temperature, and turbine output. The system operated unattended and could perform real-time processing of the data, displaying the measured power curve as data accumulated in either a bin sort mode or polynomial curve fit. Approximately 270 hr of perormance data were collected over a three-month period. The sampling interval was 2.4 sec; thrus over 400,000 raw data points were logged. Results for each of the three new tip devices, compared with the original tip, showed a small decrease (of the order of 1 kW) in power output over the measured range of wind speeds from cut-in at about 4 m/s to over 20 m/s, well into the stall limiting region. Changes in orientation and angle-of-attack of the winglets were not made. For aircraft wing tip devices, favorable tip shapes have been reported and it is likely that the tip devices tested in this program did not improve rotor performance because they were not optimally adjusted.

Gyatt, G. W.↗

Precision requirements on cosmic dust trajectory measurements

It has been known for some time that the orbital parameters of certain major meteor streams rather closely match those of presently observed comets. There is therefore a clear parent-daughter orbital relationship between meteoroids in certain streams and the comets that they derived from. For meteoroids in the photographic meteor range, it has been estimated that from 1% to 10% of the meteoroid mass is concentrated into the major streams. However, for the smaller, more numerous meteoroids observed as radar meteors, streams are less intense but there are more of them. Sekanina (1973) has established for the radar meteors that, in addition to comets, some of the parent bodies appear to be asteroids. As noted by Grun et al. (1985), meteoroid lifetimes, due to collisional destruction or Poynting-Robertson (P-R) drag losses, range from 10(5) yr downward to less than 10(3) yr; these meteoroids therefore need to be continuously be replenished by source bodies to maintain the meteoritic complex in some sort of temporal equilibrium. It will be very important to obtain their precise trajectories when meteoroids are collected with a capture apparatus in Earth orbit, as is made apparent with the following logic: a chemical, isotopic, or other analysis of any particular meteoroid constitutes a similarly detailed analysis of a small part of the parent comet or asteroid that is orbitally associated with it. One can, consequently, do rather detailed cometary or asteroid science utilizing only an Earth-orbiting cosmic dust capturing facility.

Zook, H. A.↗

Empirical model of the composition of the Venus ionosphere Repeatable characteristics and key features not modeled

In-situ measurements of positive ion composition of the ionosphere of Venus are combined in an empirical model which is a key element for the Venus International Reference Atmosphere (VIRA) model. The ion data are obtained from the Pioneer Venus Orbiter Ion Mass Spectrometer (OIMS) which obtained daily measurements beginning in December 1978 and extending to July 1980 when the uncontrolled rise of satellite periapsis height precluded further measurements in the main body of the ionosphere. For this period, measurements of 12 ion species are sorted into altitude and local time bins with altitude extending from 150 to 1000 km. The model results exhibit the appreciable nightside ionosphere found at Venus, the dominance of atomic oxygen ions in the dayside upper ionosphere and the increase in prominence of atomic oxygen and deuterium ions on the nightside. Short term variations, such as the abrupt changes observed in the ionopause, cannot be represented in the model.

Taylor, H. A., Jr.↗

Stability of limit cycles in frictionally damped and aerodynamically unstable rotor stages

This paper deals with the stability of limit cycles (Steady-State Oscillations) associated with the multi-degree-of-freedom model of a frictionally damped and aerodynamically unstable rotor stage. By using the first order averaging technique, a generalized criterion has been established to sort out those unstable limit cycles which govern the maximum transient amplitude beyond which the rotor stage becomes unstable.The stability of the remaining steady-state solutions is analyzed by linearizing the averaged system of differential equations. Numerical results are discussed for three-, four- and five-bladed disks.

Sinha, A.↗

Skin friction and Reynolds stress measurements for a turbulent boundary layer following manipulation using flat plates

Research has been undertaken to experimentally study the alterations in turbulent boundary-layer properties due to turbulence manipulation using thin flat plates. Plate geometry and placement within the boundary layer were selected to coincide with recent studies. Direct, local measurements of skin friction and Reynolds stresses were made within the boundary layer downstream of the manipulator devices for cases with an approach momentum thickness Reynolds number of 3700. A strong tendency for recovery of the Reynolds stresses was observed, accompanied by local skin-friction reductions of up to 15 percent. The mean velocity profile in the manipulated flow displayed the same similarity shape in the logarithmic region as a natural boundary layer, but had an enhanced wake component. The results indicate that the plate wake plays an important role in the boundary layer response to this sort of manipulation.

Westphal, R. V.↗

Segmentation of computer-classified Landsat multispectral scanner data into spatially-connected regions of elk habitat components

Segmentation of computer-classified Landsat multispectral data into spatially-connected regions of ground cover is described. Sorting and hash addressing, techniques commonly used for ordering and searching data records keyed by attributes, are the basis for the region identification and extraction. An example based on the use of spatial regions for evaluating elk habitat components is outlined.

Murray, R.↗

Broadband noise of propellers and rotors

Three categories of rotor noise (discrete frequency noise, impulsive noise, and broadband noise) are described and a study made of broadband noise is reported. Broadband noise has a continuous spectrum and is caused by disturbances which are not precisely repeated at each blade revolution but are basically due to some sort of turbulence-blade interactions. Source mechanisms include: inflow turbulence noise, boundary layer trailing edge noise, tip vortex noise, and several uncommon mechanisms. Broadband noise analyses are reviewed and calculations based on various analyses are compared to each other and to some available experimental data. Several satisfactory analyses are discussed and their limitations are delineated. Twenty-two references are cited.

George, A. R.↗

Simulation of Airplane and Rocket Trajectories

Simulation and Optimization of Rocket Trajectories program (SORT) contains comprehensive mathematical models for simulating aircraft dynamics, freely falling objects, and many types of ballistic trajectories. Provides high-fidelity, three-degrees-of-freedom simulation for atmospheric and exoatmospheric flight. It numerically models vehicle subsystems and vehicle environment. Used for wide range of simulations. Written in machine-independent FORTRAN 77.

Wahbah, Magdy M.↗

Comparison of medium frequency pulsed radar interferometer and correlation analysis winds, part 2

In order to test whether the chosen Doppler peaks represent localized scatters in motion, as opposed to some sort of integrated composite, an attempt was made to determine the change in position of single scatterers over a series of sequential records. A four-antenna system was employed which had 1 degree of freedom in phase. Due to limitations N-S linear transmission and E-W linear reception were used. The Doppler frequency peak selection criteria were that at least two of the four power spectra should have a local peak, and that normalized phase discrepancy, should be less than 0.3. The lack of success in tracking individual scatters seems to suggest a short lifetime. If this is the case, then the present experiment is not able to resolve the difference found between the correlation analysis true velocity and the interferometer value. On the other hand, it appears that the interferometer may be of some use in tracking waves.

Meek, C. E.↗

Mesospheric wind measurements using a medium-frequency imaging Doppler interferometer

Wind results from a medium-frequency radar operated as an imaging Doppler interferometer are presented. Ten independent antennas, together with mesospheric wind motions, were used to Doppler-sort and then echo-locate individual scattering points. The three-dimensional location and radial velocity of each discrete scattering point was determined. Mean winds were then determined by a least squares fit to the radial velocities of the ensemble of scatterers.

Adams, G. W.↗