Search NASA⌕ Search

SEARCH · Search NASA

Results for “Support Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Developing Quantum Levitation of ICF Capsules Coated with MgB 2 Thin Films

Current inertial confinement fusion (ICF) capsule support technologies create implosion perturbations which reduce fusion yield, driving the search for new support paradigms. Quantum levitation of the capsule will eliminate the requirement of a physical support structure, increasing fusion yield. The application of an external magnetic field to a capsule coated with a superconducting film can provide the necessary conditions for levitation. Magnesium diboride (MgB 2 ) is an attractive option for ICF applications as it has a high reported superconducting transition temperature of 39 K and is a low Z compound. This project is part of an ongoing effort which seeks to coat ICF capsules with a thin layer of superconducting MgB 2 . This project studied the synthesis of MgB 2 and diffusion/reaction kinetics of B/Mg/B m ultilayer thin films. These films were sputter deposited on flat glassy carbon substrates. Films were annealed in a tube furnace at temperatures between 400 °C and 650 °C for a total of 29 hours with film characterization done at predetermined intervals. At each interval, superconducting properties of the samples were evaluated with superconducting quantum interference device (SQUID) magnetometry, while Rutherford backscattering (RBS) with 2 MeV 4 He + ions was done to determine the composition and depth profile of the films. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to characterize surface morphology. Superconducting behavior was observed in thin films annealed at and above 450 °C. Formation of superconducting MgB 2 at 450 °C h as not been previously reported below 500 °C. The surface of the samples annealed at 500 °C and below was smooth with a measured roughness of ~3 nm. After 29 hours of annealing time, the 450 °C sample had a transition temperature of 27.3 K. The highest transition temperature measured was 30.9 K and was associated with a sample annealed for 29 hours at 650 °C. Transition temperatures were weakly positively correlated with annealing temperature and showed dependence on initial structural quality and oxygen contamination. Current research is attempting to synthesize superconducting MgB 2 coatings on spherical Si beads with the findings of this study. Future efforts are focused on the construction and testing of a levitation apparatus.

36 MATERIALS SCIENCE↗

Biologically Inspired Ammonia Production with Immobilized Nitrogenase Final Report

Ammonia is a critical component of the US economy as US agricultural exports exceeded $100BB in 2015 and depend heavily on ammonia fertilizers. Ammonia production consumes 1% of the world’s total energy supply and millions of tons are imported each year. An innovative bioelectrocatalyzed process is being developed using immobilized mutated nitrogenase enzymes to directly convert atmospheric nitrogen to ammonia at standard conditions, 25° C and 1 atm, and without the need for natural gas. This technology utilizes an enhanced enzyme and advanced enzyme immobilization method for increased production efficiency. The Phase I project developed a new enzyme and polymer support structure which enables direct conversion of nitrogen to ammonia under mild conditions without the need for added chemicals; only electricity and water are required. The system exhibited significantly higher efficiency than competing technologies. The Phase II project will develop a commercial process for the enzyme/polymer system. This will include scaling up production of the enzyme and determining process conditions for maximum productivity. This technology is intended for the commercial fertilizer industry, which currently uses large, expensive plants for centralized production, consuming vast amounts of natural gas and generating significant CO 2 pollution. This technology could also be used to generate alternative ammonia-based fuel and ammonia-based commodity chemicals. The Federal Government would benefit from this technology by reducing dependence on foreign imports, and increasing domestic production of a commodity chemical. Ammonia is used as key component in explosives and propellants and is essential for national security. Distributed production will lower the vulnerability of this resource. The key benefit for the customer is lower capital and operating cost. Building new ammonia production plants cost >$2BB with considerable infrastructure costs to ship the ammonia. The primary method of transportation is pipe to truck distribution, although some is still carried via railway. The feature that set our technology apart from the current Haber-Bosch process is the ability for low-cost distributed production.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Algae Farm Cost Model: Considerations for Photobioreactors

Cost estimates and assumptions for a vertical hanging-bag type photobioreactor (PBR) system are reported here for a preliminary model developed to elucidate major cost drivers and opportunities for reducing the costs of algae cultivation. The design inputs and assumptions for this system are described in the report. A baseline case is presented, and alternative cases with differing areal algal productivities are used to compare to an open-pond case. The baseline algae production cost is estimated to be 1,137/short ton (st) algae, on an ash-free dry weight (AFDW) basis (2016 US$). Sensitivity analyses probe the areal productivity, support structure cost, and PBR bag replacement cost and life as significant impact factors affecting the system cost. A preliminary comparison of the PBR system and an open pond system is also developed to indicate the cost difference between these two systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The Influences of Neutron Irradiation on Aggregate Induced Degradation of Concrete

Reactor cavity concrete, the primary support structure for the reactor pressure vessel (RPV), is exposed to chronic neutron/gamma radiation during normal operation. During long term operation, the interaction of neutron irradiation with the concrete’s constituents may cause premature degradation of the concrete structure, as highlighted by a review of concrete properties in nuclear power plant environments. At high fluence levels, as in biological shielding, neutron irradiation may cause amorphization of the crystalline components of concrete, i.e., mineral aggregates, and volume changes, which are typically expansive in nature. Volume expansion can generate tensile stresses within concrete which can induce microcracking and/or result in debonding of aggregate with the matrix. On the other hand, structural disordering can result in changes in the stability of the phase in aqueous environments. This report presents the findings of investigations performed over 3 years through the collaboration of researchers from University of California, Los Angeles, Arizona State University, and Oak Ridge National Laboratory. The first part of the study addresses the effect of neutron irradiation on the durability of aggregates. Comparisons of aqueous dissolution rates, as a function of pH and temperature, were performed for aggregates that are either pristine (i.e., non-irradiated) or exposed to Ar+ ion irradiation at specified doses. These experimental results were coupled with molecular dynamics simulations of atomic scale changes in the crystallographic structure of the mineral and any resulting changes in physical properties (e.g., density) that result. The second section focuses on macroscopic effects of such changes in aggregate behavior in concrete degradation, primarily through changes in the concrete’s microstructure. Particularly, the effects akin to those originating from alkali-silica reaction (ASR) were evaluated. The project is structured to encompass 6 main tasks, as follows: Task 1: Selection of aggregates in relation to their abundance and mineralogy, and their irradiation Task 2: Molecular dynamics (MD): The effects of irradiation on the atomic disordering of aggregates Task 3: The influences of irradiation on aggregate reactivity Task 4: Reactive-transport simulation of expansive product formation in concrete microstructures Task 5: X-FEM-based modeling of damage evolution due to irradiation-induced aggregates reactions Task 6: Benchmarking, verification and validation of the simulation modules Thus, a rigorous understanding of irradiation-assisted mineral alterations was used to develop a mechanistic degradation model for concrete exposed to neutrons, while considering aspects of: chemical reaction (dissolution and precipitation), mass and ion transport, and damage evolutions. The models developed were embedded in a multi-physics aging code for nuclear components and structures called Grizzly, which allows for benchmarking, verification, and validation against expansion data acquired on concrete undergoing alkali-silica reaction, a physically/chemically equivalent form of degradation that develops in the absence of radiation. These findings provide insight into the sensitivities of minerals to irradiation, by highlighting characteristics of concretes and power plants subject to such risks. The research will aid the nuclear power industry to anticipate and mitigate such risks in light of second license renewals.

36 MATERIALS SCIENCE↗

MagMicro with Ultra-High Energy Resolution (FY19 Q3 Progress Report)

The fabrication of the MMC detector arrays involves two photolithographic procedures. The first is to fabricate the Nb magnetization coil and pick-up coils, the SQUID preamplifiers and the associated wiring. This is done on a full 4” Si wafer, which is subsequently diced into ~0.5 cm2 SQUID chips and ~1 cm2 detector chips. The detector chips are then processed separately by depositing and patterning the paramagnetic Ag:Er sensor and support structures and then electroplating the Au absorber. In Q3, we have successfully completed the full wafer processing for the 32-pixel MMC detector arrays, diced the 4” wafer into the smaller chips and tested the individual components. The coils have the required critical current, the heat switches have a critical temperature in the desired range, and the SQUIDs have the required low noise. Unfortunately, the sputter deposition of the paramagnetic Ag:Er sensor failed several times. We spent considerable time to trace the problem to contaminations of the purifier for the Ar sputtering gas that had been exposed to atmosphere for an extended time during an earlier clean room upgrade. We then determined that the purifier is not essential for high-quality Ag:Er sensor films (Fig. 1), and successfully deposited the Ag:Er sensor film on the ~1 cm 2 detector chip.

42 ENGINEERING↗

Development of a Planar Focusing Collector for CSP

In the field of the concentrating solar power (CSP) technology, the parabolic trough is a common choice for a solar collector. Parabolic troughs are highly reflective curved mirrors that take incident sunlight and focus it onto a line-shaped receiver that runs down the center of troughs. The receivers are generally heat-absorbing pipes containing a heat transfer fluid that delivers the collected thermal energy to steam turbines or engines for generating electricity. However, parabolic troughs are constrained by wind loads and cost of materials and support structure. The goal of this project was to develop a planar focusing collector (PFC) that would serve as an alternative to the parabolic trough. An ideal PFC is ultrathin (less than a few microns) and lightweight, and could be manufactured in a manner that is scalable and low cost. Furthermore, these features would be attractive to CSP technology because of the potential to reduce cost and complexity of installation and maintenance. The work pursued in this project attempted to actualize the PFC concept by utilizing advances in the emerging area of metasurfaces, which rely on the nanopatterning of surfaces to control the amplitude and phase of light at length scales smaller than an optical wavelength. Academic pursuits of metasurface technology predominately employ electron-beam lithography (EBL) for fabrication because the technique offers highly reliable nanopatterning of surfaces with a spatial resolution of ~10 nm. However, due to the techno-economic constraints of the DOE’s SunShot program, particularly cost-effective scalability, the use of EBL was avoided in this project. Rather, fabrication approaches that lend themselves to scalable manufacturing by way of stamping or imprinting were favored. Ultimately, the tradeoffs with using such methods was the larger feature size—on the order of ~150 um critical dimension—resulting in poorer control of light compared to structures fabricated by EBL. A summary of our 2-year investigation on this topic is presented herein. We begin by presenting highlights of our 1 st -year efforts using plasmonics, i.e., metallic nanostructures, as the building block for our PFC. The limitations in this approach are subsequently summarized. We then review the strategy we employed during the final year of our project, in particular utilizing insulating or dielectric materials as the light controlling medium. We round out the report discussing the results of our findings from using this approach. The report is relatively self-contained in that and no prior knowledge of optics or nanotechnology is assumed and technical jargon is kept at a minimum.

14 SOLAR ENERGY↗

Purdue University Application Deep Dive

In May 2019, staff members from the Engagement and Performance Operations Center (EPOC) met with researchers at Purdue University for the purpose of a campus-wide Application Deep Dive. The goal of this meeting was to help characterize the requirements for two research labs on campus, and to enable cyberinfrastructure support staff to better understand the needs of the researchers they support. Material for this report includes both written documentation from the 2nd Annual Symposium for Research Data Technology at Purdue University, but also a writeup of the discussion that took place in person on May 31st, 2019. The Case Studies highlighted the ongoing challenges that Purdue University has in supporting aspects of the research community that are relatively new to the available technology support structures.

99 GENERAL AND MISCELLANEOUS↗

Demonstrate embedding of sensors in a relevant microreactor component

This report describes the first successful embedding of sensors in stainless steel pipe specimens and a miniature hex block to support structural health monitoring of microreactor components during electrically heated testing in non-nuclear testbed facilities. Sensors were embedded with an ultrasonic additive manufacturing process that uses a combination of downward pressure and an ultrasonic scrubbing motion to bond stainless steel foils to underlying materials. After placing sensors within cavities that have been machined to the size of the sensors, the ultrasonic bonding process fills the gaps around the sensors and embeds them within the part. Both Type K thermocouples and spatially distributed fiber-optic strain sensors were successfully embedded within two pipe specimens and a miniature hex block. After the fiber-optic sensors were embedded, they were interrogated and found to have minimal signal attenuation within the embedded region—a significant improvement compared to previous trials. This is likely because of the low-bend-loss fiber that was used, which greatly reduces microbending losses that occur after the embedding process. In addition to showing minimal signal attention, the fibers also showed adequate compressive strain, which is a strong indication that the sensors are physically embedded in the parts as opposed to simply being loosely contained inside the machined cavities. The embedded fibers were able to capture the strain induced in one of the pipe specimens while the pipe was actively heated with a moving heat source.

42 ENGINEERING↗

Transportation analysis and related design optimization of the Fermilab high-beta 650 MHz cryomodule

The Proton Improvement Plan-II (PIP-II) at Fermi National Accelerator Laboratory (FNAL) will create a new and vastly improved accelerator, which will be the source of high-energy particles for the experiments taking place at FNAL. The new linear accelerator (LINAC) contains several types of cryomodules, which are individual particle accelerators. The last cryomodule in the LINAC will be the High-Beta 650 (HB650), which will operate at 650 MHz. Each module is approximately 15 meters in length and 1.5 meters wide, weighs 13 tonnes, and shares many design features with three of the other cryomodules. The HB650 consists of two primary sections, the outer vacuum vessel and the components that reside within it, which will be cooled to cryogenic temperatures – the cold mass. Once assembly is complete at FNAL, it will be transported to one of three places: another location at FNAL, another national laboratory within the continental United States, or to a scientific partner in Europe. Any excitation the module experiences, such as going over rough roads when on a semitrailer, can create high stresses in components and cause failure if severe enough. Additionally, any delicate components with low resonant frequencies that match the excitation spectrum could achieve resonance, potentially causing a fatigue failure by repeated flexing. To ensure the successful transportation of the HB650, a transport analysis utilizing ANSYS simulation software has been performed on major subassemblies, as well as analysis of the subassemblies as a combined system. The optimization of components, design of support structures, and overall increasing of the lowest resonant frequencies have resulted in a cryomodule that will be better equipped to handle transportation and any large impact loads that come with it.

43 PARTICLE ACCELERATORS↗

Summary of US DOE R&D Activities on Graphite Oxidation (2006–2021)

The objective of the international collaboration between United States Department of Energy (U.S.-DOE) and Generation IV International Forum (GIF) is the development of the next generation of nuclear energy systems. The current GIF Project Arrangement (PA) on Materials (2018-2022) was revised in 2019 and extended for another 10 years (2020-2030). The Work Package 1 (“Graphite”) of the extended Project Plan (PP) on Materials specifies technical tasks and High Level Deliverables for research and development (R&D) activities related to using graphite in fuel elements, reflectors, and support structures of Very High Temperature Reactors (VHTR). The graphite tasks include specification and acquisition, qualification and development of new grades, characterization of properties, and development of behavior models. Specifically, Task 1.4 (“Graphite Oxidation Behavior”) outlines planned activities related to acute oxidation by air and chronic oxidation by impurities in the helium coolant. A final report on experimental data regarding graphite oxidation behavior is scheduled for 2022 (deliverable 3.1.1.4.a). In preparation of this deliverable, this document summarizes the R&D activities funded by U.S.-DOE from 2006 (the inception of the VHTR system arrangement) through present (2021). This report is being submitted to the GIF Graphite Working Group (GWG) to serve as input for the GWG high-level deliverable to the Project Management Board (PMB) of PA on Materials. Besides U.S.-DOE, other organizations participating to Task 1.4 of the current PA on Materials are: European Commission’s Joint Research Center (JRC), Korea Atomic Energy Research Institute (KAERI), and Japan Atomic Energy Agency (JAEA). U.S.-DOE is the main contributor on graphite oxidation R&D, with 85 % commitment of total funding during 2018-2022.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A survey on fabrication practice of cladded components from nuclear and non-nuclear industry

Integral claddings are used to provide corrosion protection for pressure vessels in nuclear and non-nuclear applications. In this work, a survey was carried out on the fabrication practice of cladded components from nuclear and non-nuclear industry, to provide the baseline reference point for the development of design and fabrication practices of cladding MSR coolant boundary components and core support structures. Gap analysis on applying these fabrication procedures to MSR applications was carried out, with emphasis on fabrication procedures that can lead to desired quality and metallurgical properties and also be applied commercially.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Flow Sensor Test Article (F-STAr) - Status Report for FY2021

This report will review updates on the status of F-STAr. First, the report will describe a general overview of the test article and how each component interacts. Then, each main component will be discussed in a deep dive section which will review the design and other relevant details. F-STAr components which are discussed in more detail include the 120 GPM-pump, the support structure and test sections, 5 kW-heater, the 2 kW-cooler and cooling system, and the submersible flowmeter. Finally, this report will conclude with a brief recap and a bulleted outline of the path moving forward.

42 ENGINEERING↗

MRSt S Specifications Report

The MRSt spectrometer is a magnetic spectrometer designed for momentum analyzing deuterons (10.7 – 14.2 MeV). The MRSt spectrometer will be attached to the target chamber of the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNS), Livermore, California. This document defines the technical requirements for the design, analysis, fabrication, inspection, testing and delivery of the complete set of magnets, vacuum chambers, and accessories to become part of the spectrometer. The interface issues, including the support structures, need to be defined later by LLNS and the vendor, which will require time and dialog before a solution can be found. This “Specification Report for the MRSt-S System”, January 19, 2020 is based on and supersedes an earlier version “Specification Report for the MRSt-S System”, May 1, 2019 The vendor shall check these specifications for possible conflicts between statements in this document. Possible solutions to any such conflicts should be included in the proposal submitted by the vendor. The proposal shall also include the delivery FOB destination LLNS.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Role of Nuclear-Conventional Intermingling on State Decision-making and the Risk of Inadvertent Escalation

The questions answered by this report are: What are the implications of nuclear and conventional intermingling on crisis stability and the potential risk of miscalculation?, and Specifically, how might entanglement influence US and competitor decision making during crisis and conflict? In practice, there are three main forms of nuclear-conventional intermingling. First, intermingling between nuclear and non-nuclear weapon systems can occur via the fielding of dual capable delivery systems like missiles or aircraft. Second, intermingling can happen due to the co-location of nuclear and non-nuclear forces and their support structures—for example, the co-location of strategic bombers and general-purpose aircraft, or the co-location of strategic submarines and general-purpose vessels. Third, intermingling can occur via convolving nuclear and conventional military command and control systems, to include ballistic missile early warning and potentially space surveillance systems as well. All three forms of nuclear-conventional intermingling have significantly increased since the end of the Cold War, driven by both technological and doctrinal changes. However, there are important differences in the rationale behind, and also the risks associated with these three different forms of intermingling. The mere existence of dual capable systems is not new— deploying such systems can increase the effectiveness of forces, and it can also provide more flexibility. The major powers have both employed and threatened with dual capable systems for decades, and they have done so without nuclear escalation. Similarly, the major powers co-located nuclear and conventional systems in the Cold War, and they did so for variety of reasons that had nothing to do with complicating the adversary’s risk calculus. The Soviet Union, for example, decided to co-locate its nuclear and conventional forces for economic and administrative reasons. Although today it might be recognized as a useful deterrent tool, it was not their primary intention. Major powers want to convince rivals that the co-location of forces creates a high bar for targeting and raises the risk of nuclear escalation, but they also want to have the flexibility of this not being true in an actual crisis or conflict.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Report on High Energy Arcing Fault Experiments: Experimental Results from Open Box Enclosures

This report documents an experimental program designed to investigate High Energy Arcing Fault (HEAF) phenomena. The experiments focus on providing data to better characterize the arc to improve the prediction of arc energy emitted during a HEAF event. An open box experiment allow for direct observation of the arc, which allows diagnostic instrumentation to record the phenomenological data needed for better characterization of the arc energy source term. The data collected supports characterization of the arc and arc jet, enclosure breach, material loss, and electrical properties. These results will be used to better characterizing the hazard for improvements in fire probabilistic risk assessment (PRA) realism. The experiments were performed at KEMA Labs located in Chalfont, Pennsylvania. The experimental design, setup, and execution were completed by staff from the NRC, the National Institute of Standards and Technology (NIST), Sandia National Laboratories (SNL) and KEMA Labs. In addition, representatives from the Electric Power Research Institute (EPRI) observed some of the experimental setup and execution. The HEAF experiments were performed between August 22, 2020 and September 18, 2020 on near-identical 51 cm (20 in) cube metal boxes suspended from a Unistrut support structure. The three-phase arcing fault was initiated at the ends of the conductors oriented vertically and located at the center of the box. Either aluminum or copper conductors were used for the conductors. The low-voltage experiments used 1 000 volts AC, while the medium-voltage experiments used 6 900 volts AC consistent with other recently completed experiments. Durations of the experiment ranged from 1 s to 5 s with fault currents ranging from 1 kA to 30 kA. Real-time electrical operating conditions, including voltage, current and frequency, were measured during the experiments. Heat fluxes and incident energies were measured with plate thermometers, radiometers, and slug calorimeters at various locations around the electrical enclosures. The experiments were documented with normal and high-speed videography, infrared imaging and photography.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

US HL-LHC Accelerator Upgrade Project (MQXFA Final Design Report)

The MQXFA Quadrupole magnets will be installed in High Luminosity LHC to form the Q1 and Q3 inner triplet optical elements in front of the interaction points 1 (ATLAS) and 5 (CMS). A pair of MQXFA units is assembled in a stainless steel helium vessel, including the end domes, to make the Q1 Cold Mass or the Q3 Cold Mass. The US HL LHC Accelerator Upgrade Project* is responsible for the design, manufacturing and test of the Q1/Q3 Cold Masses and the complete MQXFA magnets. CERN provides the cryostat components and is responsible for integration and installation in HL LHC. The MQXFA quadrupoles have 150 mm aperture, 4.2 m magnetic length, nominal gradient of 132.2 T/m, and coil peak field of 11.3 T. They use Nb_3Sn conductor and a support structure made of segmented aluminum shells pre-loaded by using bladders and keys. This report presents the final design of the MQXFA quadrupole magnets.

43 PARTICLE ACCELERATORS↗

FY22 Progress on Computational Modeling of the Water-Based NSTF

This report summarizes the system-level modeling effort by Argonne National Laboratory (Argonne) of the Natural convection Shutdown heat removal Test Facility (NSTF) in FY22. As an extension of the effort from FY21, this year’s work focuses primarily on the two-phase modeling of the NSTF using RELAP5-3D, particularly with the inclusion of the cavity model. The results from simulations were used to compare against experimental data for benchmarking purposes of the RELAP5 deck. Additionally, RELAP5 was used as a predictive tool to guide planned test operations and identify expected system behaviors. In the first part of this report, details are provided of the cavity omitted model where heat flux is applied directly as a boundary condition to the risers. The general trend predicted by the RELAP5 model matches that from the experimental data when a single-phase natural circulation flow is first established, followed by an oscillatory two-phase period and finally a stable two-phase flow. However, the onset of oscillations is predicted early by the model due to the smaller thermal mixing region in the tank. However, by expanding the simulated thermal mixing region in the tank, the onset of oscillations predicted by the model is able to match that from the experiment. These oscillations where studied in depth and are deduced to be flashing-induced instability. The model was then modified to simulate an accident scenario case where a representative heat load based on the full-scale Framatome’s 625 MW t SC-HTGR was applied directly to the riser channels. The simulated initial and boundary conditions were identical to those performed experimentally, facilitating direct comparisons between the predicted and experimental results. It was determined that the results showed some discrepancies remain, likely due to the overprediction of vapor generation rate by the computer model. In the second part of this report, the cavity model is re-introduced where it is observed that the RELAP5 prediction is now able to capture the major trends of the observed flow commonly observed during two-phase conditions. However, the onset of oscillations is once again predicted early by the model, possibly caused by the underprediction of heat loss from the heater and cavity. This is likely due to the omission of support structures in the cavity that can act as additional pathways for heat to escape to the environment. To overcome the underprediction of heat loss, part of the insulation surrounding the cavity side panels and the back of the heaters are removed to allow heat to escape directly to the environment, which then improves the RELAP5 prediction. Parametric studies are also performed to investigate the effects of heater power, tank inventory level, and tank gas space pressure on flow behaviors, also in direct comparison to conditions tested experimentally. User option-61 in the RELAP5-3D input deck, which changes the heat transfer coefficient correlations used for calculating the vapor generation, is also investigated where it is found that by enabling the option, the overall duration of oscillations is increased and matches that from the experiment better. The RELAP5 model is further benchmarked with a header inlet- throttling case where it is observed that the prediction from the model fails to capture some major features observed in the experiment. By using a modified loss coefficient curve for the valve, the accuracy of the prediction is improved where most of the major features observed in the experiment are predicted by the model. Lastly, the model is benchmarked with an inventory depletion scenario where it is observed that despite the modeling limitation of RELAP5, the prediction shows good agreement with the experimental data where major trends and features are captured by the model. Future work will see continued development of the current RELAP5-3D input deck of the NSTF to both improve the accuracy of the model’s predictive capability and continuing serving the experimental program. The mutually beneficial relationship between analysis and experimental efforts has become integral to the parent NSTF program, and the greater objective to fully understand and accurately predict the heat removal performance of a full scale RCCS concept.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Flow Sensor Test Article (F-STAr) (Design and Fabrication Status Report)

The Flow Sensor Test Article (F-STAr) is a test article currently under construction for the Mechanisms Engineering Test Loop (METL). F-STAr was designed to provide high sodium flowrate capabilities for sensor calibration, component testing, and fluid studies. Figure 1 shows two solid model views of the new test article. F-STAr includes a high-capacity pump that can provide a nominal flowrate of 120 GPM; a test section support structure that can accommodate a wide array of sub-test articles and their instrumentation; and finally, a heating and cooling system to aid in controlling the testing environment. Initially, F-STAr will be configured to test liquid metal flow sensors, specifically field shift sensors like the Eddy Current Flow Sensors (ECFS) based on the RDT C4-7T standard. To test these sensors, two test sections were designed that attempt to model Sodium Fast Reactor (SFR) outlet conditions. Figure 2 shows models of the “Full-Scaled Test Section” (FSTS) that represents a generic SFR fuel handling socket and a “Pseudo-Scaled Test Section” (PSTS) that represents a generic array of scaled fuel handling sockets. While F-STAr will be configured to test ECFS’s, it can also be outfitted to meet other experimental needs. For example, F-STAr could be setup with a test section that includes a fluidic diode or a component test investigating the performance of hydrodynamic bearings. Other test sections include studies of sodium thermal hydraulics like thermal striping. Overall, F-STAr is a flexible test article designed to accommodate many needs. This report will provide a status update on the design and construction of F-STAr. Manufacturing of all components has commenced, and several components have already been completed. These components include the pump and test section assembly stand. Other components, such as the heater, have been completed but were rejected due to the vendor not meeting the requirements of the purchase order. Lastly, the submersible flowmeter and main flange components are under construction, and their status will be reviewed in this report. Overall, most of the F-STAr components and parts will be completed by the end of September 2022.

42 ENGINEERING↗