Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIFFRACTION MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Ultrafast probing of the x-ray-induced lattice and electron dynamics in graphite at atomic-resolution

We used LCLS pulses to excite thin-film and bulk graphite with various different microstructures, and probed the ultrafast ion and electron dynamics through Bragg and x-ray Thomson scattering (XRTS). We pioneered XRTS at LCLS, making this technique viable for other users. We demonstrated for the first time that the LCLS can be used to characterize warm-dense-matter through Bragg and x-ray Thomson scattering. The warm-dense-matter conditions were created using the LCLS beam. Representative examples of the results are shown in the Figure above. In our experiment, we utilized simultaneously both Bragg and two Thomson spectrometers. The Bragg measurements as a function of x-ray fluence and pulse length allows us to characterize the onset of atomic motion at 2 keV with the highest resolution to date. The Bragg detector was positioned in back-reflection, providing us access to scattering data with large scattering vectors (nearly 4{pi}/{lambda}). We found a clear difference between the atomic dynamics for 70 and 300 fs pulses, and we are currently in the process of comparing these results to our models. The outcome of this comparison will have important consequences for ultrafast diffractive imaging, for which it is still not clear if atomic resolution can truly be achieved. The backward x-ray Thomson scattering data suggests that the average graphite temperature and ionization was 10 eV and 1.0, respectively, which agrees with our models. In the forward scattering data, we observed an inelastic feature in the Thomson spectrum that our models currently do not reproduce, so there is food for thought. We are in the process of writing these results up. Depending on if we can combine the Bragg and Thomson data or not, we plan to publish them in a single paper (e.g. Nature or Science) or as two separate papers (e.g. two Phys. Rev. Lett.). We will present the first analysis of the results at the APS Plasma Meeting in November 2010. We had a fantastic experience performing our experiment at the LCLS, and we are grateful to the beamline scientists and all the support personnel for enabling this experiment. A major hurdle was the very short transition time of two days, which despite all our preparations did not give us sufficient time to test the full system before the start of the beam time. We further were not able to make optimal use of the beam time since we had to exchange samples in the middle of the 36-hours shift. An additional 12-hours break could have avoided this. Finally, our experiment would have benefitted from the best possible focus, but 5 shifts do not allow performing the experiment while fine-tuning the focusing optics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temporal characteristics of polarization holographic gratings formed in a photosensitive polymeric film containing N-benzylideneaniline derivative side groups

A polarization holographic grating was recorded in a transparent thin film formed from polymethacrylate with N-benzylideneaniline (NBA) derivative side groups. We measured the real time diffraction properties. The data were analyzed based on a theoretical model that accounted for the distribution of optical anisotropy caused by molecular reorientation as well as for surface relief (SR) deformation caused by molecular motion. Optical anisotropy rapidly increased and then slowly decreased, with increasing recording time. This phenomenon was described based on photoisomerization and photocleavage reactions of the NBA side groups. SR deformation was also induced in the film by polarization holographic recording, without any subsequent processes. The photoinduced optical anisotropy and SR deformation were retained after the recording was turned off.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of the metastable cubic B{sub 1} phase of the La{sub 2}Mo{sub 2}O{sub 9} single crystal

The structure of the metastable B{sub 1} phase of the La{sub 2}Mo{sub 2}O{sub 9} single crystal is investigated using X-ray diffraction. It is established that the crystal structure of the compound under investigation is described by the cubic unit cell with the parameter a = 7.158(5) A, which makes it possible to index approximately 84% of the reflections measured for this single crystal. The structure of the metastable cubic B{sub 1} phase is characterized by a local lowering of the symmetry for the La and Mo atoms, which are displaced from their positions on the threefold axis, thus forming three sites around it with an occupancy of 0.333(2). The O(1) atom in the structure of the metastable cubic B{sub 1} phase remains in the 4a position on the threefold axis but occupies it by only 86%. The O(2) and O(3) atoms located in a general position occupy their own sites with occupancies of 0.77(2) and 0.35(2), respectively. The final R factor of the refinement of this structural model is 2.52%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Status Report on Photothermal Radiometry Development

Thermal transport properties such as thermal conductivity and diffusivity, are critical parameters in the development of improved nuclear fuels and components. It is well known that thermal transport properties change temporally and spatially due to dynamic microstructural evolution as a result of neutron irradiation. Laser based photothermal techniques are an ideal candidate for thermal properties measurement of irradiated materials because they are non contact, non destructive and can be performed remotely. In this report, we present the progress in the development of a photothermal radiometry (PTR) system to measure the thermal diffusivity of solid samples. The PTR technique measures the local temperature response from a modulated heat source by detecting the sample radiation heat flux. Initially, a well developed thermal wave analytical model was fit to the data to obtain the thermal diffusivity. However, systematic errors from the diffraction effect and non linearity issues resulted in thermal diffusivity measurements higher than literature values. These effects have been studied, an improved analytical model has been developed, and the physics behind the phenomena are still under investigation. A procedure for optimizing measurements from the benchtop system has been provided.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Rigorous Comparison of X-ray Diffraction Thickness Measurement Techniques using Silicon-on-insulator Thin Films

Thickness data from semiconductor-grade silicon-on-insulator thin-film samples determined from high-resolution X-ray diffraction (HRXRD) data using the Scherrer equation, rocking-curve modeling, thickness fringe analysis, Fourier analysis and the Warren-Averbach method, as well as with cross-sectional transmission electron microscopy and X-ray reflectivity measurements, are presented. The results show that the absolute accuracy of thin-film thickness values obtained from HRXRD data is approximately 1 nm for all techniques if all sources of broadening are correctly identified, while their precision is one or two orders of magnitude smaller. The use of multiple techniques is required to determine the various contributions to peak broadening.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the combination of molecular replacement and single-wavelength anomalous diffraction phasing for automated structure determination

The combination of molecular replacement and single-wavelength anomalous diffraction improves the performance of automated structure determination with Auto-Rickshaw. A combination of molecular replacement and single-wavelength anomalous diffraction phasing has been incorporated into the automated structure-determination platform Auto-Rickshaw. The complete MRSAD procedure includes molecular replacement, model refinement, experimental phasing, phase improvement and automated model building. The improvement over the standard SAD or MR approaches is illustrated by ten test cases taken from the JCSG diffraction data-set database. Poor MR or SAD phases with phase errors larger than 70° can be improved using the described procedure and a large fraction of the model can be determined in a purely automatic manner from X-ray data extending to better than 2.6 Å resolution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Validation Data for Benchmarking Wire Arc Additive Manufacturing Process Simulations

Residual stresses cause geometric distortion and affect mechanical performance of additively manufactured structures, yet they are notoriously difficult to assess and predict. Distortion (warpage) can drive parts outside dimensional tolerance limits, leading to part rejection or rework. For parts that meet tolerance, locked-in residual stress fields can affect structural integrity during operation, particularly subcritical cracking by fatigue, creep, or corrosion. This work develops benchmark data for a common additive manufacturing process (Wire Arc Additive Manufacturing) that can be applied for calibration and validation of physical process models that predict residual stress fields. The work includes design of two different samples of differing geometry, detailed manufacturing records for a set of physical samples, and an extensive set of residual stress measurement data developed using two diverse techniques (the contour method and neutron diffraction). An initial application of the work is also reported, where a modeling challenge was issued to secure residual stress model predictions from two independent laboratories that were blind to residual stress measurement data. These initial blind residual stress predictions show significant discrepancies relative to the measurement data, illustrating the potential value of the underlying validation data. An open repository for this work, including the sample designs, manufacturing process records, and the residual stress data, is also provided for future application in non-blind validation efforts.

36 MATERIALS SCIENCE↗

X-ray diffraction effect from surface acoustic waves traveling on a deposited multilayer

We investigate the x-ray diffraction effects from surface acoustic waves (SAW) traveling along a multilayer. The diffraction intensity distribution depends on the incidence angle and the multilayer SAW (MLSAW) amplitude. Particularly, a small departure deviating from the Bragg incidence angle at a certain amplitude will produce a larger variation of the intensity distribution. This shows that the diffraction intensity from MLSAW has an extremely high sensitivity to the Bragg incidence angle, which is different from a SAW traveling along a solid surface without deposited layers. By carefully analyzing the relationship between the intensity distribution I and the incidence angle {theta}, the corresponding analytic expression of the intensity distribution is theoretically derived. Our theoretical prediction is in great agreement with the experimental results previously obtained. A theoretical model that can be applied to study the x-ray diffraction effect from MLSAW is developed. The extremely high sensitivity to the Bragg angle will help us in acousto-optic instrument research with MLSAW.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Propagation characteristics of a Gaussian laser beam in plasma with modulated collision frequency

The propagation characteristics of a Gaussian laser beam in cold plasma with the electron collision frequency modulated by laser intensity are presented. The nonlinear dynamics of the ponderomotive force, which induce nonlinear self-focusing as opposed to spatial diffraction, are considered. The effective dielectric function of the Drude model and complex eikonal function are adopted in deriving coupled differential equations of the varying laser beam parameters. In the framework of ponderomotive nonlinearity, the frequency of electron collision in plasmas, which is proportional to the spatial electron density, is strongly interrelated with the laser beam propagation characteristics. Hence, the propagation properties of the laser beam and the modulated electron collision frequency distribution in plasma were studied and explained in depth. Employing this self-consistent method, the obtained simulation results approach practical conditions, which is of significance to the study of laser-plasma interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A high temperature diffraction-resistance study of chalcopyrite, CuFeS{sub 2}

The electrical, magnetic and structural properties of synthetic chalcopyrite, CuFeS{sub 2}, have been studied up to 873 K using DC resistance measurements performed in-situ during neutron powder diffraction experiments. Under ambient conditions the material adopts the accepted structural model for CuFeS{sub 2} in the space group I4-bar 2d, with the magnetic moment of the Fe{sup 3+} cations aligned along [001]. The electrical resistivity is around 0.3 {Omega} cm under ambient conditions, consistent with semiconductor character, and decreases slightly with increase in temperature until a more abrupt fall occurs in the region 750-800 K. This abrupt change in resistivity is accompanied by a structural transition to a cubic zinc blende structured phase (space group F4-bar 3m) in which Cu{sup +} and Fe{sup 3+} cations are disordered over the same tetrahedral crystallographic sites and by a simultaneous loss of long-range magnetic order. The implications of these results are discussed in the context of previous studies of the chalcopyrite system. - Graphical abstract: Structural, magnetic and electrical properties of CuFeS{sub 2} to 873 K have been investigated using DC resistance measurements, performed in-situ during the collection of powder neutron diffraction data. Highlights: > Structural, magnetic and electronic properties are probed simultaneously. > A fall in resistivity at high temperatures is associated with cation disorder. > The order-disorder transition is accompanied by the loss of magnetic order. > The structural and magnetic phase transition is preceded by a 2-phase region. > Sulphur loss at high temperatures causes the phase transitions to be irreversible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Heat Load Diamond Monochromator Project at ESRF

Due to its outstanding thermal properties, diamond is an attractive alternative to silicon as a monochromator material for high intensity X-ray beams. To date, however, the practical applications have been limited by the small size and relatively poor crystallographic quality of the crystals available. The ESRF Diamond Project Group has studied the perfection of diamonds in collaboration with industry and universities. The group has also designed and tested different stress-free mounting techniques to integrate small diamonds into larger X-ray optical elements. We now propose to develop a water-cooled Bragg-Bragg double crystal monochromator using diamond (111) crystals. It will be installed on the ESRF undulator beamline, ID06, for testing under high heat load. This monochromator will be best suited for the low energy range, typically from {approx}3.4 keV to 15 keV, due to the small size of the diamonds available and the size of the beam footprint. This paper presents stress-free mounting techniques studied using X-ray diffraction imaging, and their thermal-mechanical analysis by finite element modelling, as well as the status of the ID06 monochromator project.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Roles of Hydration and Magnetism on the Structure of Ferrihydrite from First Principles

We report density functional theory calculations aimed at predicting thermodynamically stable structures for ferrihydrite across a range of possible compositions determined by the amount of structural water. Based on an assumed formula unit of Fe5O8H + nH2O, we performed ab initio calculations with evolutionary searching to find the lowest enthalpy structures as a function of the water content up to n = 2. This is the most exhaustive search for the ferrihydrite structure conducted so far; more than 5000 unique configurations were generated and evaluated over five states of hydration. Among them, the Michel akdaliate model was generated, along with several energetically comparable new structures at higher states of hydration. However, a direct comparison between calculated and experimental pair distribution function and X-ray diffraction patterns for the 50 lowest energy structures shows that none beyond the Michel model could be associated with ferrihydrite. Nevertheless, this energetically comparable structure set provides a novel basis for analyzing and understanding the effects of hydration and magnetism on the topology of ferrihydrite, from which we conclude that any tetrahedral Fe should be viewed as a metastable structural defect, created either as a result of the rapid kinetics of crystal growth or to accommodate a local magnetic stress between neighboring Fe atoms.

composition, density functional theory, ferrihydri↗

A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions

In order to study the effect of Fe cation substitution on the local structure, defect formation, and hyperfine interactions in ZnO, Mössbauer spectroscopy measurements of the microwave processed Zn 1 - x Fe x O (x = 0.05, 0.10, 0.15, and 0.20) nanoparticles, together with ab initio calculations, were performed. Complementary information on the distribution of particle size and morphology, as well as magnetic properties, were obtained by X-ray diffraction, transmission electron microscopy, and squid-magnetometry. The selected model for analyzing the Mössbauer spectra of our samples is a distribution of quadrupole splittings. The fitting model with two Lorentz doublets was rejected due to its failure to include larger doublets. The Fe 3 + ions do not yield magnetic ordering in the samples at room temperature. The results from first-principles calculations confirm that the major component of the Mössbauer spectra corresponds to the Fe-alloyed ZnO with Zn vacancy in the next nearest neighbor environment. The magnetic measurements are consistent with the description of the distribution of iron ions over the randomly formed clusters in the ZnO host lattice. While at room temperature all the samples are paramagnetic, magnetic interactions cause a transition into a cluster spin-glass state at low temperatures. © 2019 Author(s).

60 APPLIED LIFE SCIENCES↗

Rolling hills on the core-mantle boundary

Recent results suggest that an iron-rich oxide may have fractionally crystallized from a primordial magma ocean and settled on the core–mantle boundary (CMB). Based on experimental results, the presence of only a few percent of Fe-rich oxide could slow seismic waves down by several percent. This heavy layer can become highly undulating as predicted from dynamic modeling but can remain as a distinct structure with uniform velocity reductions. Here, we use the large USArray seismic network to search for such structures. Strong constraints on D" are provided by the core-phase SKS where it bifurcates, containing a short segment of P-wave diffractions (P d ) when crossing the CMB, called SKS d . Synthetics from models with moderate velocity drops (less than 10%) involving a layer with variable thickness, perhaps a composite of sharp small structures, with strong variation in thickness can explain both the observed SKS d waveforms and large scatter in differential times between SKKS and SKS. A smooth 3D image is obtained from inverting SKS d waveforms displaying rolling-hills with elongated dome-like structures sitting on the CMB. The most prominent one has an 80-km height, ~8° length, and ~4° width, thus adding still more structural complexity to the lower mantle. We suggest that these results can be explained by a dynamically-stabilized material containing small amounts (~5%) iron-rich (Mg,Fe)O providing a self-consistent physical interpretation.

Sun, Daoyuan↗

Resonant diffraction gratings for spatial differentiation of optical beams

Diffraction of a two-dimensional optical beam from a resonant diffraction grating is considered. It is shown that at certain resonance parameters the diffraction grating allows for spatial differentiation and integration of the incident beam. The parameters of the diffraction grating for spatial differentiation of optical beams in the transmission geometry are calculated. It is shown that the differentiating diffraction grating allows the conversion of the two-dimensional beam into the two-dimensional Hermite – Gaussian mode. The presented results of numerical modelling are in good agreement with the proposed theoretical description. The use of the considered resonant diffraction gratings is promising for solving the problems of all-optical data processing. (laser applications and other topics in quantum electronics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anisotropic broadening of XRD peaks of α′-Fe: Williamson-Hall and Warren-Averbach analysis using full width at half maximum (FWHM) and integral breadth (IB)

Highlights: • There is a limited increase in the dislocation density in the martensite from the center to the surface of the specimen. • Both FWHM and Integral Breadth (IB) follows Conventional-WH model for undeformed material. • Significant perturbation from linearity observed for higher order peaks in deformed material • Between FWHM and IB-approach, the modified-WH model provides a better response with the FWHM-approach than IB-approach. - Abstract: The anisotropic broadening of the X-ray diffraction (XRD) peaks of shear deformed martensite (α′-Fe), using both full-width at half-maximum (FWHM) and integral breadth (IB), has been studied following conventional and modified Williamson-Hall (WH) and Warren-Averbach (WA) analysis. The crystallographic study reveals limited plastic deformation of martensite (α′) within a shallow depth from the shear surface, as indicated by marginal change in the character and density of dislocation, showing the inability of the α′-phase to accommodate the strain energy of shear deformation. More importantly, the study reveals significant perturbation of modified-WH and WA model, when IB is considered for size and strain analysis, especially for higher order peaks, whereas, FWHM shows reasonably good agreement with the above mentioned models for the range of diffraction spectrum considered.

36 MATERIALS SCIENCE↗