Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electrode Engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

The hollow cathode in the quasi-steady MPD discharge

A large hollow cathode has been operated in a quasi-steady MPD discharge over a range of current from 7 to 30 kA and argon mass flow from 0.04 to 6.0 g/sec. The 1.3-cm-i.d. cathode cavity attains steady emission characteristics in some tens of microseconds without the assistance of auxiliary heating, low work function inserts, or external keeper electrodes. Measured current and potential distributions within the cavity reveal that the current attaches in a zone 1 to 2 cm long with a surface current density greater than 1000 A/sq cm and a local axial electric field less than 10 V/cm. Electron densities within the cavity, estimated from spectroscopic records, are above 10 to the 17th power per cu cm, at least one order of magnitude greater than has been reported for either ion engine hollow cathodes or conventional solid cathodes in similar arc discharges.

Von Jaskowsky, W. F.↗

Study of the capacitance technique for measuring high-temperature blade tip clearance on ceramic rotors

Higher operating temperatures required for increased engine efficiency can be achieved by using ceramic materials for engine components. Ceramic turbine rotors are subject to the same limitations with regard to gas path efficiency as their superalloy predecessors. In this study, a modified frequency-modulation system is proposed for the measurement of blade tip clearance on ceramic rotors. It is expected to operate up to 1370 C (2500 F), the working temperature of present engines with ceramic turbine rotors. The design of the system addresses two special problems associated with nonmetallic blades: the capacitance is less than that of a metal blade and the effects of temperature may introduce uncertainty with regard to the blade tip material composition. To increase capacitance and stabilize the measurement, a small portion of the rotor is modified by the application of 5-micron-thick platinum films. The platinum surfaces on the probe electrodes and rotor that are exposed to the high-velocity gas stream are coated with an additional 10-micron-thick protective ceramic topcoat. A finite-element method is applied to calculate the capacitance as a function of clearance.

Barranger, John P.↗

Virtual electrodes for high-density electrode arrays

The present embodiments are directed to implantable electrode arrays having virtual electrodes. The virtual electrodes may improve the resolution of the implantable electrode array without the burden of corresponding complexity of electronic circuitry and wiring. In a particular embodiment, a virtual electrode may include one or more passive elements to help steer current to a specific location between the active electrodes. For example, a passive element may be a metalized layer on a substrate that is adjacent to, but not directly connected to an active electrode. In certain embodiments, an active electrode may be directly coupled to a power source via a conductive connection. Beneficially, the passive elements may help to increase the overall resolution of the implantable array by providing additional stimulation points without requiring additional wiring or driver circuitry for the passive elements.

42 ENGINEERING↗

Aqueous pyridinium cation-based redox flow batteries

The present invention provides an aqueous redox flow battery comprising a negative electrode immersed in an aqueous liquid negative electrolyte, a positive electrode immersed in an aqueous liquid positive electrolyte, and a cation-permeable separator (e.g., a porous membrane, film, sheet, or panel) between the negative electrolyte from the positive electrolyte. During charging and discharging, the electrolytes are circulated over their respective electrodes. The electrolytes each comprise an electrolyte salt (e.g., a lithium or sodium salt), a redox reactant. The negative redox reactant comprises a pyridinium compound of Formula (I) as described in the specification.

25 ENERGY STORAGE↗

Formation of Ohmic back contact for Ag2ZnSn(S,Se)4 photovoltaic devices

Techniques for forming an ohmic back contact for Ag2ZnSn(S,Se)4 photovoltaic devices. In one aspect, a method for forming a photovoltaic device includes the steps of: depositing a refractory electrode material onto a substrate; depositing a contact material onto the refractory electrode material, wherein the contact material includes a transition metal oxide; forming an absorber layer on the contact material, wherein the absorber layer includes Ag, Zn, Sn, and at least one of S and Se; annealing the absorber layer; forming a buffer layer on the absorber layer; and forming a top electrode on the buffer layer. The refractory electrode material may be Mo, W, Pt, Ti, TiN, FTO, and combinations thereof. The transition metal oxide may be TiO2, ZnO, SnO, ZnSnO, Ga2O3, and combinations thereof. A photovoltaic device is also provided.

14 SOLAR ENERGY↗

Cold cathode switching device and converter

A cold-cathode switching device is presented. The cold-cathode switching device includes a housing defining a chamber; an ionizable gas disposed in the chamber; and a plurality of electrodes disposed in the chamber. The plurality of electrodes includes a cathode and an anode defining a discharge gap, and wherein at least one of the cathode and anode comprises a material that is liquid at an operating temperature of the cathode or the anode.

42 ENGINEERING↗

Low Energy Sputtering Experiments for Ion Engine Lifetime Assessment

The sputtering yield of molybdenum under xenon ion bombardment was measured using a Quartz Crystal Microbalance. The measurements were made for ion kinetic energies in the range 100-1keV on molybdenum films deposited by magnetron sputtering in conditions optimized to reproduce or approach bulk-like properties. SEM micrographs for different anode bias voltages during the deposition are compared, and four different methods were implemented to estimate the density of the molybdenum films. A careful discussion of the Quartz Crystal Microbalance is proposed and it is shown that this method can be used to measure mass changes that are distributed unevenly on the crystal electrode surface, if an analytical expression is known for the differential mass-sensitivity of the crystal and the erosion profile. Finally, results are presented that are in good agreement with previously published data, and it is concluded that this method holds the promise of enabling sputtering yield measurements at energies closer to the threshold energy in the very short term.

Duchemin Olivier B.↗

Photostability of Ambient-Processed, Conjugated Polymer Electrochromic Devices Encapsulated by Bioderived Barrier Films

Polymer-based electrochromic devices (ECDs) are a promising technology for enabling low-voltage, disposable displays, yet are currently limited by photo-oxidative bleaching of the active materials. Here, renewable barrier films composed of cellulose and chitin are presented as an alternative to poly(ethylene terephthalate) (PET) for encapsulating ECDs. To assess barrier film effectiveness, lateral ECDs composed of poly(3,4-propylenedioxythiophene-(CH 2 OEtHx) 2 ) (P(ProDOT)) active layers were constructed and encapsulated with a multilayer barrier consisting of chitin nanofibers and cellulose nanocrystals spray cast onto a cellulose acetate substrate (oxygen transmission rate (OTR) = 29 cm 3 m –2 day –1 ), a commercially available PET film (OTR = 8.5 cm 3 m –2 day –1 ), and a high-performance PET-Al 2 O 3 multilayer barrier film (OTR < 1 cm 3 m –2 day –1 ). The photodegradation of the P(ProDOT) active layer was determined by measuring the evolution of the colorimetric contrast (ΔE*) and switching speeds as a function of light exposure (100 mW cm –2 , AM 1.5 G light). Photodegradation was found to proceed at a similar rate for all encapsulated devices (roughly 10 times more slowly than unencapsulated devices), highlighting the opportunity for replacing petroleum packaging with bioderived barrier films. Analysis of the switching kinetics, the shifts in optical absorbance, and evidence of chemical degradation indicate that both photochemical breakdown of the electrolyte and cross-linking of the P(ProDOT) active material are key drivers for loss of device performance when oxygen flux to the active material is limited. Furthermore, pathways toward better understanding photodegradation are then proposed with sustainability in mind for future ECD design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implications of Local Cathode Structure in Solid-State Batteries

Solid-state batteries (SSBs) are promising candidates for energy storage systems—specifically for automotive applications—owing to their higher energy density and supreme safety. SSBs currently must improve area-specific cathode loadings as well as the electro-chemo-mechanical stability at high voltages. Composite cathodes in SSBs are comprised of active material, ion and electronic conductors, binders, and electronic conducting materials. In addition to experimental limitations with engineering thick cathode architectures, low utilization and chemomechanical degradation of the cathodes limit the performance of composite cathodes. Composite cathodes must optimize several parameters simultaneously to achieve high performances that include loading, electrochemically active surface area, mechanical resilience, and porosity. This chapter summarizes the current state-of-the-art applications with regard to composite cathodes for SSBs and provides insights into cathode architectures using geometric packing models. Tailoring ion and electron transport pathways within the electrode while mitigating operational stresses is crucial for achieving energy-dense cathode structres for SSBs.

Dixit, Marm↗

Structure of Rhizobium sp. 4-9 histamine dehydrogenase and analysis of the electron transfer pathway to an abiological electron acceptor

Histamine dehydrogenase from the gram-negative bacterium Rhizobium sp. 4-9 (HaDHR) is a member of a small family of dehydrogenases containing a covalently attached FMN, and the only member so far identified to date that does not exhibit substrate inhibition. Here, in this study, we present the 2.1 Å resolution crystal structure of HaDHR. This new structure allowed for the identification of the internal electron transfer pathway to abiological ferrocene-based mediators. Alanine 437 was identified as the exit point of electrons from the Fe 4 S 4 cluster. The enzyme was modified with a Ser436Cys mutation to facilitate covalent attachment of a ferrocene moiety. When modified with Fc-maleimide, this new construct demonstrated direct electron transfer from the enzyme to a gold electrode in a histamine concentration-dependent manner without the need for any additional electron mediators.

59 BASIC BIOLOGICAL SCIENCES↗

Calorimetry can detect the early onset of hydrolysis in hybrid supercapacitors with aqueous electrolytes

This study investigates the effect of cation species on the onset of electrolyte hydrolysis in hybrid supercapacitors with aqueous electrolytes using isothermal operando calorimetry. The cells consisted of a positive α-MnO 2 cryptomelane electrode and a negative activated carbon (AC) electrode with either 0.5 M K 2 SO 4 or 0.5 M Cs 2 SO 4 aqueous electrolytes. They were characterized using cyclic voltammetry and galvanostatic cycling. In addition, the instantaneous heat generation rate at each electrode was measured using a custom isothermal operando calorimeter. Heat generation associated with resistive losses (Joule heating) and reversible ion adsorption/desorption was clearly identified. For larger potential windows, an endothermic dip, attributed to the onset of hydrolysis, was observed at the positive α-MnO 2 electrode where K + and Cs + ions engaged in fast surface redox reactions. Interestingly, this endothermic dip appeared at 1.8 V and 2.0 V for K 2 SO 4 and Cs 2 SO 4 aqueous electrolytes, respectively. The difference in the stable operating potential window was attributed to thinner solvation shell around Cs + cation than for K + thus reducing the amount of water present near the electrodes as ions partially shed their solvation shells during adsorption. The early onset of hydrolysis could be observed by isothermal operando calorimetry before it could be observed with conventional electrochemical methods.

42 ENGINEERING↗

Cobalt-substituted SrTi 0.3 Fe 0.7 O 3–δ : a stable high-performance oxygen electrode material for intermediate-temperature solid oxide electrochemical cells

A key need in the development of solid oxide cells (SOCs) is for electrodes that promote fast oxygen reduction and oxygen evolution reactions at reduced operating temperature (≤700 °C), with sufficient durability to allow operation over desired 40 000 h lifetimes. A wide range of electrode materials have been investigated, with some providing resistance low enough for cell operation below 700 °C, but it is generally found that the electrode performance degrades over time. Here we demonstrate an oxygen electrode material, Sr(Ti 0.3 Fe 0.7–x Co x )O 3–δ (STFC), that provides a unique combination of excellent oxygen electrode performance and long-term stability. The addition of a relatively small amount of Co to Sr(Ti 0.3 Fe 0.7 )O 3–δ , e.g., x = 0.07, reduces the electrode polarization resistance by >2 times. The STFC electrode yields stable performance in both fuel cell and electrolysis modes at 1 A cm –2 . The fundamental oxygen diffusion and surface exchange coefficients of STFC are determined, and shown to be substantially better than those of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3–δ , the most widely used SOC oxygen electrode material. Here, while other electrode materials have been shown to exhibit better oxygen transport coefficients than STFC, they do not match its stability.

25 ENERGY STORAGE↗

Measurement of Ionic and Electronic Conductivities of Yttria-Stabilized Zirconia by an Embedded Electrode Method

A new technique is presented for the measurement of ionic and electronic conductivities in predominantly oxygen ion conducting materials such as 8YSZ. Cylindrical disc samples of 8YSZ with an embedded Pt wire electrode in the center and two surface porous Pt electrodes were fabricated. When a DC electrical potential is applied across one surface electrode and the embedded electrode, oxygen ions migrate through the YSZ toward the embedded electrode, while electrons transport in the external circuit. In this manner, neutral oxygen is electrochemically pumped to the embedded electrode raising the local oxygen chemical potential. Under the pressure built up, oxygen permeation occurs from the embedded electrode, through the YSZ sample, to the outer surfaces of the sample. In steady state, the electrochemical oxygen flux to the embedded electrode under applied voltage is exactly balanced by out permeation of oxygen governed by the electronic conductivity. Here, using this technique both the ionic and the electronic conductivities of YSZ were measured at a temperature as low as 500°C.

36 MATERIALS SCIENCE↗

Fuel cell membrane electrode assembly

Fuel cell membrane electrode assemblies and fuel cell polymer electrolyte membranes are provided comprising bound anionic functional groups and polyvalent cations, such as Mn or Ru cations, which demonstrate increased durability. Methods of making same are also provided.

36 MATERIALS SCIENCE↗

Early calendar life and health prediction of silicon batteries via machine learning with uncertainty quantification

Lithium-ion batteries with silicon anodes promise high energy density but are limited by calendar lifetime. Reducing the long iteration time to obtain experimental results requires predicting calendar lifetime early in a cell's life. In this study, we demonstrate that lightweight machine learning models with feature engineering can provide calendar lifetime estimates from early electrochemical signals. After 1 month of electrochemical aging, the best models achieve 10% error in calendar-life prediction and can separate "bad" from "good" lifetime cells with a mean F1 score of 0.857. As battery systems exhibit inherent variability, four methods for uncertainty quantification are compared, and confidence intervals are demonstrated with an uncertainty of +-3.6 months in lifetime prediction. A feature importance analysis indicates that early patterns in voltage decay are the strongest indicators of calendar lifetime. Finally, this modeling approach has high error when generalizing to new electrode chemistries or testing conditions but with appropriately low confidence.

25 ENERGY STORAGE↗

The strain-induced transitions of the piezoelectric, pyroelectric, and electrocaloric properties of the CuInP 2 S 6 films

Low-dimensional ferroelectrics, ferrielectrics, and antiferroelectrics are of urgent scientific interest due to their unusual polar, piezoelectric, electrocaloric, and pyroelectric properties. The strain engineering and strain control of the ferroelectric properties of layered two-dimensional van der Waals materials, such as CuInP 2 (S,Se) 6 monolayers, thin films, and nanoflakes, are of fundamental interest and especially promising for their advanced applications in nanoscale nonvolatile memories, energy conversion and storage, nano-coolers, and sensors. Here, we study the polar, piezoelectric, electrocaloric, and pyroelectric properties of thin strained films of a ferrielectric CuInP 2 S 6 covered by semiconducting electrodes and reveal an unusually strong effect of a mismatch strain on these properties. In particular, the sign of the mismatch strain and its magnitude determine the complicated behavior of piezoelectric, electrocaloric, and pyroelectric responses. The strain effect on these properties is opposite, i.e., “anomalous,” in comparison with many other ferroelectric films, for which the out-of-plane remanent polarization, piezoelectric, electrocaloric, and pyroelectric responses increase strongly for tensile strains and decrease or vanish for compressive strains.

antiferroelectricity↗

Engineering Solid Electrolyte Interphase Composition by Assessing Decomposition Pathways of Fluorinated Organic Solvents in Lithium Metal Batteries

Studies have shown fluorinated electrolyte solvents can form desirable solid electrolyte interphase (SEI) in lithium metal batteries. In this study, we develop a detailed mechanistic understanding of two high performing electrolytes, Fluoroethylene Carbonate (FEC) and Difluoroethylene Carbonate (DFEC) to demonstrate minimal structural variations can lead to different decomposition products, and thereby the nature of the SEI. Using density functional theory (DFT) calculations, we find different initial bond-breaking mechanisms between FEC and DFEC. We develop free energy diagrams for the decomposition pathways including both electrochemical and chemical steps. Using the computational Li electrode, we identify the largest limiting potential of 1.77 V for FEC decomposition, associated with the formation of lithium fluoride, lithium oxide and FEC oligomers, and 1.53 V for DFEC, which correspond to the formation of polymerized vinylene carbonate and lithium fluoride. We suggest the formation of oligomers in the case of FEC instead of long polymers may lead to better SEI compactness. We also demonstrate the SEI components of FEC and DFEC are not stable on typical cathode voltage (3.87 V). This study presents a unified electrocatalytic perspective on SEI formation and decomposition.

25 ENERGY STORAGE↗

Wide Band Gap Chalcopyrite Photoelectrodes for Direct Water Splitting (Final Technical Report)

The chalcopyrite material class, typically identified by its most popular alloy CuInGaSe 2 , provides exceptionally good candidates for photoelectrochemical (PEC) water splitting and has the potential to meet DoE EERE’s targets in terms of hydrogen production costs (less than $2/gge). Some key advantages of this class include remarkable photon-to-electron conversion efficiency and a high Faradaic efficiency for the hydrogen evolution reaction, two characteristics essential for efficient PEC water splitting. However, the band gaps of commonly used chalcopyrites in the photovoltaic field (1.0-1.6 eV) are too narrow to be compatible with the multi-junction approach for efficient PEC hydrogen production, in which a stack of solar absorbers generates the bias required for water splitting. Nonetheless, previous studies performed by our team demonstrated that chalcopyrites’ narrow band gaps could be effectively widened using simple conversion steps, leading to functional chalcopyrite-based PEC electrodes with optical band gap in the 1.8-2.4 eV range, making this class highly suitable for renewable hydrogen production via water splitting. This multi-disciplinary research program lead by the University of Hawai’i/Hawai’i Natural Energy Institute combined unique analytical techniques (UNLV), state-of-the-art theoretical modeling (LLNL) with advanced thin film materials synthesis (HNEI, NREL and Stanford) to provide deeper understanding of wide band gap chalcopyrite-based PEC materials and engineer high performance/corrosion-resistant photocathodes with tunable energetics and compatible with the multi-junction approach. The goals of this project were to demonstrate photoelectrochemical (PEC) solar-hydrogen production using a dual absorber system with a solar-to-hydrogen conversion efficiency of at least 15% with an operational life up to 2,000 hours and capable of generating at least 3 liters of hydrogen in 8 hours. After a brief introduction (Section 1) and description of our work plan (Section 2), we present in Section 3 our results on the development of new wide bandgap copper chalcopyrites absorbers for PEC waters splitting. We first show through modeling how alloying can be used to tailor the optical properties and/or surface energetics of various material candidates. We also present how specific defects (e.g., GaCu) can lead to recombination centers within the forbidden gap of copper-poor chalcopyrites. Then, we present our efforts to synthesize high efficiency wide band gap CuGa 3 Se 5 , CuGa(S,Se) 2 and Cu(In,Ga)S 2 photocathodes capable of generating photocurrent density over 10 mA/cm 2 . We also demonstrate that Cu-rich absorbers should be avoided as they lead to poor sub-band gap optical transmission. In Section 4, we first report on our efforts to tune the energetics of chalcopyrites toward the hydrogen evolution reaction. First, we quantified the energetics of wide band gap chalcopyrites interfaced with conventional CdS buffer layer, as measured with X-ray photoelectron spectroscopy techniques, and evidence the presence of a large (and undesirable) conduction band offset at this interface. Then, we highlight some of the work performed with alternative buffer layers, including In 2 S 3 . Durability improvements with various ultra-thin protective layers are presented in Section 5. Our data show that TiO 2 combined with MoS 2 can significantly improve chalcopyrites lifetime up to 350 hours under continuous operation at 8 mA/cm 2 . Finally, in Section 6 we report strategies to integrate chalcopyrite photocathodes into standalone tandem PEC devices. Although promising methods were proposed for both mechanical and monolithic stacking with narrow band gap PV drivers, no functional device was fabricated on time to fulfill the program end goals.

08 HYDROGEN↗