Search NASA⌕ Search

SEARCH · Search NASA

Results for “dependence analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Phase separation and nonradiative carrier recombination in active regions of light-emitting devices based on InGaN quantum dots in a GaN or AlGaN matrix

Structures with InGaN nanolayers within GaN and AlGaN matrices, which constitute active regions of light-emitting devices, have been studied. Spectra and relative intensities of photoluminescence (PL) in the temperature range 20-300 K and the dependence of the position of the PL peak on the energy of the excitation photons have been measured. It is shown that, to account for the temperature dependence of the PL intensity, it is necessary to take into consideration, in addition to the nonradiative recombination via defects in the matrix and in the residual quantum well (RQW), an additional recombination channel with low activation energy, which is presumably associated with defects located close to quantum dots. It is demonstrated that structures with the AlGaN matrix show a larger decrease in the PL intensity upon an increase in temperature from 50 to {approx}200 K, compared with structures with the GaN matrix. Analysis of the temperature dependence of the PL intensity in terms of the model that considers these three channels of nonradiative recombination shows that this dependence is associated with a decrease in the carrier's localization energy relative to the ground state in the RQW. Such a decrease is due to suppression of the phase separation in InGaN layers grown within the AlGaN matrix. This behavior is confirmed by PL measurements at different excitation photon's energies and leads, in addition to the lower localization energy, a decrease in the concentration of recombination centers is observed for these samples.

36 MATERIALS SCIENCE↗

Synthesis, structure and magnetic properties of Sr{sub 2}Fe{sub 1-x}Ga{sub x}MoO{sub 6} (0 {<=} x {<=} 0.6) double perovskites

Polycrystalline Sr{sub 2}Fe{sub 1-x}Ga{sub x}MoO{sub 6} (0 {<=} x {<=} 0.6) materials have been synthesized by solid state reaction method and studied by neutron powder diffraction (NPD) and magnetization measurements. Rietveld analysis of the temperature dependent NPD data shows that the compounds crystallize in the tetragonal symmetry in the space group I4/m. The anti-site (AS) defects concentration increases with Ga doping, giving rise to highly B-site disordered materials. Ga doping at the Fe-site decreases the cell volume. The evolution of bond lengths and the cation oxidation states was determined from the Rietveld refinement data. The saturation magnetization and Curie temperature decreased with the increasing Ga content in the samples. Low temperature neutron diffraction data analysis and magnetization measurements confirm the magnetic interaction as ferrimagnetic in the sample.

36 MATERIALS SCIENCE↗

Ion guiding accompanied by formation of neutrals in polyethylene terephthalate polymer nanocapillaries: Further insight into a self-organizing process

A relatively large yield of neutralized atoms was observed when 3 keV Ar{sup 7+} ions were guided trough polyethylene terephthalate nanocapillaries. Time and deposited-charge dependence of the angular distribution of both the guided ions and the neutrals was measured simultaneously using a two-dimensional multichannel plate detector. The yield of neutrals increased significantly faster than that of guided ions and saturated typically at a few percent level. In accordance with earlier observations, both the yield and the mean emission angle of the guided ions exhibited strong oscillations. For the atoms, the equilibrium was achieved not only faster, but also without significant oscillations in yield and angular position. A phase analysis of these time dependencies provides insight into the dynamic features of the self-organizing mechanisms, which leads to ion guiding in insulating nanocapillaries.

36 MATERIALS SCIENCE↗

The effect of gender and age structure on municipal waste generation in Poland

Highlights: • An effect of gender and age structure on municipal waste generation was presented. • The waste accumulation index is influenced by a number of unemployed women. • Greater share of women in society contributes to greater waste production. • A model describing the analyzed dependences was determined. - Abstract: In this study the effect of gender and age structure on municipal waste generation was investigated. The data from 10-year period, from 2001 to 2010 year, were taken into consideration. The following parameters of gender and age structure were analyzed: men and woman quantity, female to male ratio, number of working, pre-working and post-working age men/women, number of unemployed men/women. The results have showed a strong correlation of annual per capita waste generation rate with number of unemployed women (r = 0.70) and female to male ratio (r = 0.81). This indicates that waste generation rate is more depended on ratio of men and women that on quantitative size of each group. Using the regression analysis a model describing the dependence between female to male ratio, number of unemployed woman and waste quantity was determined. The model explains 70% of waste quantity variation. Obtained results can be used both to improve waste management and to a fuller understanding of gender behavior.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Subspace-based Inverse Uncertainty Quantification for Nuclear Data Assessment

Safety analysis and design optimization depend on the accurate prediction of various reactor attributes. Predictions can be enhanced by reducing the uncertainty associated with the attributes of interest. An inverse problem can be defined and solved to assess the sources of uncertainty, and experimental effort can be subsequently directed to further improve the uncertainty associated with these sources. In this work a subspace-based algorithm for inverse sensitivity/uncertainty quantification (IS/UQ) has been developed to enable analysts account for all sources of nuclear data uncertainties in support of target accuracy assessment-type analysis. An approximate analytical solution of the optimization problem is used to guide the search for the dominant uncertainty subspace. By limiting the search to a subspace, the degrees of freedom available for the optimization search are significantly reduced. A quarter PWR fuel assembly is modeled and the accuracy of the multiplication factor and the fission reaction rate are used as reactor attributes whose uncertainties are to be reduced. Numerical experiments are used to demonstrate the computational efficiency of the proposed algorithm. Our ongoing work is focusing on extending the proposed algorithm to account for various forms of feedback, e.g., thermal-hydraulics and depletion effects.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Electron nuclear double resonance study of photostimulated luminescence active centers in CsBr:Eu{sup 2+} medical imaging plates

CsBr:Eu{sup 2+} needle image plates exhibit an electron-paramagnetic-resonance (EPR) spectrum at room temperature (RT), whose intensity is correlated with the photostimulated luminescence sensitivity of the plate. This EPR spectrum shows a strong temperature dependence: At RT it is owing to a single Eu{sup 2+} (S =7/2) center with axial symmetry, whereas at T<35 K the spectra can only be explained when two distinct centers are assumed to be present, a minority axial center and a majority center with nearly extremely rhombic symmetry. In this paper these low-temperature centers are studied with electron nuclear double resonance (ENDOR) spectroscopy, which reveals the presence of {sup 1}H nuclei close to the central Eu{sup 2+} ions in the centers. Analysis of the angular dependence of the ENDOR spectra allows to propose models for these centers, providing an explanation for the observed difference in intensity between the spectral components and for their temperature dependence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural phase transitions of robust insulating Bi{sub 1-x}La{sub x}Fe{sub 1-y}Ti{sub y}O{sub 3} multiferroics

In contrast to leaky BiFeO{sub 3}, of which two structural phase transitions of cycloidal modulated antiferromagnetic-paramagnetic and ferroelectric-paraelectric are observed below 850 °C, chemical co-substitution to form Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} ternary solid solution makes these multiferroic ceramics become robust insulating low dielectric loss and exhibit rich structural phase transitions. Differential thermal analysis and temperature-dependent X-ray diffraction measurements probe four first-order structural phase transitions, e.g., T{sub H} = 305 °C, T{sub N} = 365 °C, T{sub C} = 810 °C, and T{sub S} = 830 °C observed in the Bi{sub 0.98}La{sub 0.02}Fe{sub 0.99}Ti{sub 0.01}O{sub 3} system, which are reasonably attributed to Brazovskii-type cycloidal modulated antiferromagnetic-helimagnetic (at T{sub H}) and helimagnetic-paramagnetic (at T{sub N}) magnetic phase transitions, ferroelectric-paraelectric (at T{sub C}) and rhombohedral-cubic (at T{sub S}) structural phase transitions, respectively. Magnetic phase transition temperatures change a little but ferroelectric and lattice structural phase transition temperatures decrease gradually with increasing co-substitution up to composition-induced rhombohedral-(pseudo-)cubic structural phase boundary. The first-order nature of magnetic phase transition and emergence of helimagnetic phase were attributed to Ti{sup 3+} d{sup 1} magnetic disorder distribution in the Fe{sup 3+} d{sup 5}-O-Fe{sup 3+} d{sup 5} chains, while the first-order nature becomes weak with increasing co-substitution, owing to decreased ferroelectric rhombohedral lattice distortion. An intermediate rhombohedral paraelectric phase is discovered intervening between ferroelectric rhombohedral and paraelectric cubic phase, of which the temperature range defined by difference between T{sub C} and T{sub S} increases with increasing co-substitution. It was found that T{sub C} and T{sub S} are able to be predicted quantitatively by reduced mass of unit cell. These findings enrich our understanding of ferroic phase transitions and advance designing novel high temperature multiferroic compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Einstein–Cartan gravity, Asymptotic Safety, and the running Immirzi parameter

In this paper we analyze the functional renormalization group flow of quantum gravity on the Einstein–Cartan theory space. The latter consists of all action functionals depending on the spin connection and the vielbein field (co-frame) which are invariant under both spacetime diffeomorphisms and local frame rotations. In the first part of the paper we develop a general methodology and corresponding calculational tools which can be used to analyze the flow equation for the pertinent effective average action for any truncation of this theory space. In the second part we apply it to a specific three-dimensional truncated theory space which is parametrized by Newton’s constant, the cosmological constant, and the Immirzi parameter. A comprehensive analysis of their scale dependences is performed, and the possibility of defining an asymptotically safe theory on this hitherto unexplored theory space is investigated. In principle Asymptotic Safety of metric gravity (at least at the level of the effective average action) is neither necessary nor sufficient for Asymptotic Safety on the Einstein–Cartan theory space which might accommodate different “universality classes” of microscopic quantum gravity theories. Nevertheless, we do find evidence for the existence of at least one non-Gaussian renormalization group fixed point which seems suitable for the Asymptotic Safety construction in a setting where the spin connection and the vielbein are the fundamental field variables. -- Highlights: •A functional RG equation for a first order formulation of gravity is constructed. •The theory space constituted by tetrad and spin connection variables is explored. •The RG equation is solved in a 3 dimensional truncation of theory space. •The flow of Newton’s constant, the cosmological constant and the Immirzi parameter is analyzed. •Evidence for the nonperturbative renormalizability of the theory is found.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of low-energy electron irradiation on the optical properties of structures containing multiple InGaN/GaN quantum well

Data on the temperature dependence of the cathodoluminescence intensity in multiple InGaN/GaN quantum-well structures in the temperature range 80–300 K are reported. Unirradiated structures and structures irradiated with electrons with subthreshold energy are studied. It is shown that, upon irradiation, the temperature dependence becomes weaker. From analysis of the results obtained in this study and previously, it can be suggested that electron irradiation initiates the relaxation of strains produced in quantum wells due to the InGaN-GaN lattice mismatch.

36 MATERIALS SCIENCE↗

Analysis on Part Distortion and Residual Stress in Big Area Additive Manufacturing with Carbon Fiber-Reinforced Thermoplastic using Dehomogenization Technique

Part distortion and bottom surface warpage often occur in extrusion-based additive manufacturing. The undesirable deformations during the printing process are due to residual stresses caused by material shrinkage. Analysis on residual stress and deformation requires accurate thermo-mechanical material properties. Polymer composites reinforced with short fibers have intrinsic inhomogeneities with nonuniform fiber orientation. Therefore, homogenized macro properties may not accurately represent the progressive damage behavior or distortion. In this study, fiber orientations in Acrylonitrile Butadiene Styrene (ABS) reinforced with 20%wt carbon fiber are calculated using a de-homogenization technique. Thermal expansion coefficients in multiple directions are obtained from Thermo-Mechanical Analysis (TMA) tests. Temperature dependent stiffness is measured, and temperature dependent strength is estimated. Thermal conductivities in multiple directions and thermal capacity are measured. The calibrated thermo-mechanical properties of the composite with de-homogenized technique are used to analyze the residual stress and distortion of a 4 ft-wide wall printed in the Big Area Additive Manufacturing (BAAM) system. For experimental measurement on the wall printing, Infra-Red (IR) camera captures the temperature field, and Linear Variable Differential Transformer (LVDT) is installed to measure the warpage at the bottom surface. The experimental data are compared to the numerical analysis results. The temperature profile and the distortion profile from experiment are close to the simulation results. Damages due to residual stress and distortion are analyzed.

Kim, Pum↗

Lifetime Reliability Prediction of Ceramic Structures Under Transient Thermomechanical Loads

An analytical methodology is developed to predict the probability of survival (reliability) of ceramic components subjected to harsh thermomechanical loads that can vary with time (transient reliability analysis). This capability enables more accurate prediction of ceramic component integrity against fracture in situations such as turbine startup and shutdown, operational vibrations, atmospheric reentry, or other rapid heating or cooling situations (thermal shock). The transient reliability analysis methodology developed herein incorporates the following features: fast-fracture transient analysis (reliability analysis without slow crack growth, SCG); transient analysis with SCG (reliability analysis with time-dependent damage due to SCG); a computationally efficient algorithm to compute the reliability for components subjected to repeated transient loading (block loading); cyclic fatigue modeling using a combined SCG and Walker fatigue law; proof testing for transient loads; and Weibull and fatigue parameters that are allowed to vary with temperature or time. Component-to-component variation in strength (stochastic strength response) is accounted for with the Weibull distribution, and either the principle of independent action or the Batdorf theory is used to predict the effect of multiaxial stresses on reliability. The reliability analysis can be performed either as a function of the component surface (for surface-distributed flaws) or component volume (for volume-distributed flaws). The transient reliability analysis capability has been added to the NASA CARES/ Life (Ceramic Analysis and Reliability Evaluation of Structures/Life) code. CARES/Life was also updated to interface with commercially available finite element analysis software, such as ANSYS, when used to model the effects of transient load histories. Examples are provided to demonstrate the features of the methodology as implemented in the CARES/Life program.

Nemeth, Noel N.↗

Aerosol optical hygroscopicity measurements during the 2010 CARES campaign

Measurements of the effect of water uptake on particulate light extinction or scattering made at two locations during the 2010 Carbonaceous Aerosols and Radiative Effects Study (CARES) study around Sacramento, CA are reported. The observed influence of water uptake, characterized through the dimensionless optical hygroscopicity parameter γ, is compared with calculations constrained by observed particle size distributions and size-dependent particle composition. A closure assessment has been carried out that allowed for determination of the average hygroscopic growth factors (GFs) at 85% relative humidity and the dimensionless hygroscopicity parameter &kappa; for oxygenated organic aerosol (OA) and for supermicron particles (defined here as particles with aerodynamic diameters between 1 and 2.5 microns), yielding κ = 0.1–0.15 and 0.9–1.0, respectively. The derived range of oxygenated OA &kappa; values are in line with previous observations. The relatively large values for supermicron particles is consistent with substantial contributions of sea-salt-containing particles in this size range. Analysis of time-dependent variations in the supermicron particle hygroscopicity suggest that atmospheric processing, specifically chloride displacement by nitrate and the accumulation of secondary organics on supermicron particles, can lead to substantial depression of the observed GF.

54 ENVIRONMENTAL SCIENCES↗

X-Ray Spectro-polarimetry with Photoelectric Polarimeters

We derive a generalization of forward fitting for X-ray spectroscopy to include linear polarization of X-ray sources, appropriate for the anticipated next generation of space-based photoelectric polarimeters. We show that the inclusion of polarization sensitivity requires joint fitting to three observed spectra, one for each of the Stokes parameters, I(E), U(E), and Q(E). The equations for Stokes’ I(E) (the total intensity spectrum) are identical to the familiar case with no polarization sensitivity, and for which the model-predicted spectrum is obtained by a convolution of the source spectrum, F(E′), with the familiar energy response function, ϵ(E′) R(E′, E), where ϵ(E′) and R(E′, E) are the effective area and energy redistribution matrix, respectively. In addition to the energy spectrum, the two new relations for U(E) and Q(E) include the source polarization fraction and position angle versus energy, a(E′), and ψ{sub 0}{sup ′}(E{sup ′}), respectively, and the model-predicted spectra for these relations are obtained by a convolution with the “modulated” energy response function, μ(E′) ϵ (E′)R(E, E′), where μ(E′) is the energy-dependent modulation fraction that quantifies a polarimeter’s angular response to 100% polarized radiation. We present results of simulations with response parameters appropriate for the proposed PRAXyS Small Explorer observatory to illustrate the procedures and methods, and we discuss some aspects of photoelectric polarimeters with relevance to understanding their calibration and operation.

79 ASTRONOMY AND ASTROPHYSICS↗

High-Field Magneto-Conductivity Analysis of Bi{sub 2}Se{sub 3} Single Crystal

We report the high-field (up to 14 Tesla) magneto-conductivity analysis of Bi{sub 2}Se{sub 3} topological insulator grown via the self-flux method. The detailed experimental investigations including crystal growth as well as the electrical, thermal, and spectroscopic characterizations of the resultant Bi{sub 2}Se{sub 3} single crystal are already reported by some of us. The current letter deals with high-field magneto-conductivity analysis in terms of Hikami Larkin Nagaoka (HLN) model, which revealed that the electronic conduction is dominated by both surface state-driven weak anti-localization (WAL), as well as the bulk weak localization (WL) states. Further, by applying the HLN equation, we have extracted the fitting parameters, i.e., phase coherence length (l{sub φ}) and the pre-factor (α). Here, the magneto-conductivity data is fitted up to ± 5 Tesla, but in order to extract reliable fitting parameters, the same is fitted at much lower magnetic fields, i.e., up to ± 1 Tesla. The value of the HLN coefficient (α), extracted from the HLN equation exhibited values close to − 1.0, indicating both WAL and WL contributions. On the other hand, the extracted l{sub φ} is seen to decrease from 11.125 to 5.576 nm as the temperature is increased from 5 to 200 K, respectively. Summarily, the short letter discusses primarily the temperature-dependent magneto-conductivity analysis of pristine Bi{sub 2}Se{sub 3} single crystal by the HLN model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantitative determination of energy enhanced interlayer transport in pulsed laser deposition of SrTiO3

We present a quantitative analysis of layer-by-layer growth in pulsed laser deposition using homoepitaxy of SrTiO$_3$ as a prototype perovskite. The analysis of time-dependent coverages extracted from single shot surface x-ray diffraction transients shows that pulsed laser deposition consists of two phases that occur before and after crystallization on vastly different time scales. The non-equilibrium processes during and immediately after the arrival of the laser plume represent the primary mechanism for interlayer transport before crystallization that is completed on $\mu$s-range or faster time scales. Interlayer transport slows down dramatically after crystallization because it is driven only by sluggish thermally activated processes. The thermal interlayer transport represent a small fraction of total interlayer transport that decreases with the laser repetition rate. This analysis shows the energetic species that are present only during the plume arrival to be orders of magnitude more effective than thermal processes in promoting interlayer transport that is the key to the ability of pulsed laser deposition to produce sharp interfaces in both homo and heteroepitaxial growth of oxide films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compendium of fracture mechanics problems

Fracture mechanics analysis results are presented from the following structures/components analyzed at Marshall Space Flight Center (MSFC) between 1982 and 1989: space shuttle main engine (SSME), Hubble Space Telescope (HST), external tank attach ring, B-1 stand LOX inner tank, and solid rocket booster (SRB). Results from the SSME high pressure fuel turbopump (HPFTP) second stage blade parametric analysis determine a critical flaw size for a wide variety of stress intensity values. The engine 0212 failure analysis was a time dependent fracture life assessment. Results indicated that the disk ruptured due to an overspeed condition. Results also indicated that very small flaws in the curvic coupling area could propagate and lead to failure under normal operating conditions. It was strongly recommended that a nondestructive evaluation inspection schedule be implemented. The main ring of the HST, scheduled to launch in 1990, was analyzed by safe-life and fail-safe analyses. First safe-life inspection criteria curves for the ring inner and outer skins and the fore and aft channels were derived. Afterwards the skins and channels were determined to be fail-safe by analysis. A conservative safe-life analysis was done on the 270 redesign external tank attach ring. Results from the analysis were used to determine the nondestructive evaluation technique required.

Stallworth, R.↗

Updated determination of N * resonance parameters using a unitary, multichannel formalism

Results are presented for an updated multichannel energy-dependent partial-wave analysis of πN scattering. Our earlier research incorporated single-energy amplitudes for πN→πN, γN→πN, πN→ππN, πN→ηN, and πN→KΛ. The present work incorporates new single-energy solutions for γp→ηp up to a center-of-mass (c.m.) energy of 1990 MeV, γp→K+Λ up to a c.m. energy of 2230 MeV, and γn→ηn up to a c.m. energy of 1885 MeV, as well as updated single-energy solutions for πN→ηN, πN→KΛ, and γN→πN. Here, we introduce and discuss the resonance parameters obtained from a combined fit of all these single-energy amplitudes. Our determined energy-dependent amplitudes support an excellent description of the corresponding measured observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

RESIDUAL DEFORMATION ANALYSIS IN COMPOSITE SHELL STRUCTURES MANUFACTURED USING AUTOMATED FIBER PLACEMENT

The manufacturing of composites typically produces residual stresses that can significantly affect the final shape of the structure. The process of automated fiber placement (AFP) has become a prominent manufacturing technique in developing layups with tailored, variable stiffness morphology. The steered patterns of fiber tows with and without overlaps produce residual deformations that are distinctive from traditional layups. Digital image correlation was used to measure the AFP lamina coefficients of thermal expansion, which were incorporated into finite element analyses (FEA) to model the cooling phase of the cure cycle. The effects of nonlinear analysis and temperature-dependent lamina properties calculated using self-consistent field micromechanics, on the resulting residual deformation of shells, were also modeled. The predicted residual deformation was analyzed by considering out-of-roundness in cylindrical shells and compared to the experimental results. The shell FEA results were well-correlated with the overall deformed shape of the AFP cylinder with overlaps, while the shell FEA model of the AFP cylinder without overlaps did not show as good of qualitative match of the deformation pattern. Analytical correlation with measured results were insensitive to material softening at elevated temperatures, geometric nonlinearities, and variations in measured lamina thermal properties. To improve the accuracy of the residual deformation analysis, these results suggest that the thermo-chemical shrinkages preceding the cooldown should be considered, as well as possible variations in ply level microstructure due to the presence of the embedded fiber tow gaps and overlaps.

Composites↗