Search NASA⌕ Search

SEARCH · Search NASA

Results for “Metallization process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Quantitative Attachment of Bimetal Combinations of Transition-Metal Ions to the Surface of TiO 2 Nanorods

Here we report the sequential, quantitative loading of transition-metal ions (Cr 3+ , Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ , and Cu 2+ ) onto the surface of rod-shaped anatase TiO 2 nanocrystals in bimetallic combinations ( 6 C 2 = 15) to form M,M'-TiO 2 nanocrystals. The materials were characterized with transmission electron microscopy (TEM), powder X-ray diffraction (XRD), elemental analysis, X-ray photoelectron spectroscopy (XPS), and UV–visible spectroscopy. TEM and XRD data indicate that the sequential adsorption of metal ions occurs with the retention of the phase and morphology of the nanocrystal. Atomistic models of the M,M'-TiO 2 nanocrystals were optimized with density functional theory calculations. Calculated UV–visible absorption spectra and partial charge density maps of the donor and acceptor states for the electronic transitions indicate the importance of metal-to-metal charge transfer (MMCT) processes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hydrogen Stability and Bonding in SiN x and Al 2 O 3 Dielectric Stacks on Poly-Si/SiO x Passivating Contacts

Polycrystalline Si on SiO x passivating contacts enables some of the highest efficiency single-junction Si photovoltaic devices, but the high-temperature firing process needed for industrial metallization can significantly reduce passivation. We show that after firing, the implied open-circuit voltage, iV oc , for the Al 2 O 3 /SiN x /poly-Si/SiO x /c-Si stack is 20-30 mV higher than the SiNx/Al 2 O 3 /poly-Si/SiO x /c-Si stack and therefore provides better passivation of the SiO x /c-Si interface. Using effusion measurements and Fourier transform infrared spectroscopy, we demonstrate that more than twice as much hydrogen is retained in the dielectric up to the peak firing temperature of ~800 degrees C for Al 2 O 3 -capped structures. If the Al 2 O 3 layer is not present in the stack, after firing, the iVoc is lower by 50-100 mV compared to Al 2 O 3 /SiN x or SiN x /Al 2 O 3 stacks. These studies will inform future work on the role of dielectrics in aiding the passivation of poly-Si/SiO x passivating contacts.

08 HYDROGEN↗
DOE OSTI2026

Base-Free Catalytic Transfer Hydrogenation of Alkyl Formates and Organic Esters at Mild Temperature

The pincer-ligated ruthenium complex ( iPr PN H P)Ru(CO)H 2 ( iPr PN H P = ( i Pr 2 PC 2 H 4 ) 2 NH) is an active catalyst for the transfer hydrogenation of alkyl formates (HCO 2 R) and organic esters (RCO 2 R′) to the corresponding alcohols under base-free reaction conditions at mild temperatures. Specifically, a range of alkyl formate esters were reduced to MeOH and the corresponding alcohols in high yields using ( iPr PN H P)Ru(CO)H 2 as the catalyst and isopropanol ( i PrOH) as the hydrogen donor at 30 °C. The first step in the process is the metal-catalyzed transesterification of the alkyl formate with i PrOH to generate isopropyl formate, which is then reduced. The use of i PrOH as the hydrogen donor is crucial. ( iPr PN H P)Ru(CO)H 2 can also catalyze the transfer hydrogenation of a broad range of organic esters, including cyclic, acyclic, heteroatom-substituted, and long-chain bio-derived esters, to the corresponding alcohols in good yields using ethanol (EtOH) as the hydrogen donor at 55 °C. Computational studies were used to elucidate the proposed pathway for alkyl formate reduction and the underlying reasons why i PrOH is the most effective hydrogen donor for alkyl formate reduction, while EtOH is optimal for organic ester reduction. Overall, this work describes a highly active catalyst for alkyl formate and organic ester transfer hydrogenation and provides mechanistic insight into the factors responsible for the strong catalytic performance. Finally, these findings will be valuable for designing catalysts for both transfer hydrogenation and related reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Texture Evolution of Plated Lithium in Anode-Free Solid-State Batteries

Here, this study investigates lithium plating texture in anode-free solid-state batteries using synchrotron-based X-ray diffraction. Conventional methods are limited by lithium’s low electron density and softness, which hinders direct interrogation in anode-free solid-state batteries. Results reveal that lithium plating texture is influenced by temperature and current density. Under mild conditions, lithium exhibited a ⟨110⟩ fiber texture. However, higher current densities and elevated temperatures led to a more randomized orientation, suggesting a dependence on plating conditions. The results highlight how the operating and processing conditions for lithium metal can influence the texture of lithium metal and reversible operation.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Understanding the Thermal Stability of Palladium–Platinum Core–Shell Nanocrystals by In Situ Transmission Electron Microscopy and Density Functional Theory

Core–shell nanocrystals offer many advantages for heterogeneous catalysis, including precise control over both the surface structure and composition, as well as reduction in loading for rare and costly metals. Although many catalytic processes are operated at elevated temperatures, the adverse impacts of heating on the shape and structure of core–shell nanocrystals are yet to be understood. In this work, we used ex situ heating experiments to demonstrate that Pd@Pt 4L core–shell nanoscale cubes and octahedra are promising for catalytic applications at temperatures up to 400 °C. We also used in situ transmission electron microscopy to monitor the thermal stability of the core–shell nanocrystals in real time. Our results demonstrate a facet dependence for the thermal stability in terms of shape and composition. Specifically, the cubes enclosed by {100} facets readily deform shape at a temperature 300 °C lower than that of the octahedral counterparts enclosed by {111} facets. A reversed trend is observed for composition, as alloying between the Pd core and the Pt shell of an octahedron occurs at a temperature 200 °C lower than that for the cubic counterpart. Density functional theory calculations provide atomic-level explanations for the experimentally observed behaviors, demonstrating that the barriers for edge reconstruction determine the relative ease of shape deformation for cubes compared to octahedra. Furthermore, the opposite trend for alloying of the core–shell structure can be attributed to a higher propensity for subsurface Pt vacancy formation in octahedra than in cubes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Spinel-Structured High Entropy Oxides: Low Temperature Synthesis, Characterization, and Potential Applications

High entropy oxides (HEOs) have recently attracted increasing attention due to their remarkable properties and relatively low cost. Herein we report a simple, highly scalable, and low temperature method for synthesizing spinel (FeNiCoCuZn) 3 O 4 (HEO). We heated an aqueous solution containing divalent cations in high alkali environments to temperatures of 25 - 95 °C for 24 h under atmospheric pressure. The HEO, synthesized at 95 °C for 24 h in 1 M KOH, was paramagnetic at room temperature, with a magnetic mass susceptibility of χ = (7.5 ± 0.2) × 10 –7 m 3 ·kg –1 . It demonstrated stable electrochemical lithium storage performance, with a gravimetric capacity of ∼300 mAh·g –1 at 100 mA·g –1 . It was also active in the electrocatalytic oxygen evolution reaction with an overpotential of 460 mV in alkaline media. The band gap energies were in the range of 2.4 eV. Our advancement in the synthesis and processing of transition metal-based HEOs will undoubtedly render them a viable solution for next generation materials for energy production and storage.

diffraction↗
DOE OSTI2019

Collapse of LiNi 1– x–y Co x Mn y O 2 Lattice at Deep Charge Irrespective of Nickel Content in Lithium-Ion Batteries

Volume variation and the associated mechanical fracture of electrode materials upon Li extraction/insertion are a main cause limiting lifetime performance of lithium-ion batteries. For LiNi 1-x-y Co x Mn y O 2 (NCM) cathodes, abrupt anisotropic collapse of the layered lattice structure at deep charge is generally considered characteristic to high Ni content and can be effectively suppressed by elemental substitution. Herein, we demonstrate the lattice collapse is a universal phenomenon almost entirely dependent on Li utilization, and not Ni content, of NCM cathodes upon delithiation. With Li removal nearing 80 mol%, very similar c-axis lattice shrinkage of around 5% occurs concurrently for NCMs synthesized in-house regardless of nickel content (90, 70, 50, or 33 mol%); meanwhile, the a-axis lattice contracts for high-Ni NCM, but it expands for low-Ni NCM. We further reveal Co-Mn co-substitution in NCM barely, if at all, affects several key structural aspects governing the lattice distortion upon delithiation. Finally, our results highlight the importance of evaluating true implications of compositional tuning on high-Ni layered oxide cathode materials to maximize their charge-storage capacities for next-generation high-energy Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Photoluminescence of a Uranium(IV) Alkoxide Complex

In this report, we describe the photoluminescence of a homoleptic uranium(IV) alkoxide complex. Excitation of [Li(THF)] 2 [U IV (O t Bu) 6 ] leads to the first example of photoluminescence from a well-defined actinide complex originating from an f–f excitation, supported by second order multiconfigurational electronic structure calculations including spin–orbit coupling. These calculations show strong spin–orbit coupling between the excited triplet and singlet states for the 5f-orbital manifold, which leads to a long-lived excited state lifetime of 0.85 s at low temperature. The photophysical properties of homoleptic uranium(V) and uranium(VI) tertbutoxide complexes are also presented; we find that oxidation of the uranium(IV) alkoxide results in quenching of luminescence in [Li(THF)][U V (O t Bu) 6 ] and [U VI (O t Bu) 6 ]. This is attributed to competing ligand to metal charge transfer absorption processes shifted to lower energy upon oxidation of the actinide center, which mask the relevant f–f transitions in the visible region of the electronic absorption spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Heterogeneity in Hyporheic Flow, Pore Water Chemistry, and Microbial Community Composition in an Alpine Streambed

Abstract The hyporheic zone, where surface water and groundwater mix, is an important microbial habitat where biogeochemical reactions influence water quality. We show that spatial variability in hyporheic flow in the East River near Crested Butte, CO, drives heterogeneity in streambed geochemical conditions and microbial community assemblages, but the diversity of microbial assemblages remains nearly constant throughout the reach. In July 2018, we collected approximately 100 pore water samples at 20‐cm depth and analyzed them for anions, cations, dissolved organic carbon, dissolved organic matter (DOM) quality, and basic water quality parameters. Vertical hydraulic head gradients were also measured to assess the potential for upward or downward flow, and heat tracing was used to quantify vertical flux rates at a subset of locations. We found that regions of the streambed that are more groundwater‐dominated contain less dissolved oxygen, higher concentrations of reduced metals, and more microbially processed, recalcitrant DOM, while more surface water‐dominated locations contain higher dissolved oxygen concentrations and terrestrially derived, labile DOM. 16S rRNA gene sequencing of extracted DNA revealed that microbial community composition varies with geochemical gradients related to hyporheic flow. These findings provide a better understanding of hyporheic controls on streambed biogeochemistry during the baseflow season, which is expected to lengthen with climate change in alpine watersheds due to earlier snowmelt onset and reduced snowpack.

Nelson, Amelia R.↗
DOE OSTI2021

Atomistic processes of surface-diffusion-induced abnormal softening in nanoscale metallic crystals

Abstract Ultrahigh surface-to-volume ratio in nanoscale materials, could dramatically facilitate mass transport, leading to surface-mediated diffusion similar to Coble-type creep in polycrystalline materials. Unfortunately, the Coble creep is just a conceptual model, and the associated physical mechanisms of mass transport have never been revealed at atomic scale. Akin to the ambiguities in Coble creep, atomic surface diffusion in nanoscale crystals remains largely unclear, especially when mediating yielding and plastic flow. Here, by using in situ nanomechanical testing under high-resolution transmission electron microscope, we find that the diffusion-assisted dislocation nucleation induces the transition from a normal to an inverse Hall-Petch-like relation of the strength-size dependence and the surface-creep leads to the abnormal softening in flow stress with the reduction in size of nanoscale silver, contrary to the classical “alternating dislocation starvation” behavior in nanoscale platinum. This work provides insights into the atomic-scale mechanisms of diffusion-mediated deformation in nanoscale materials, and impact on the design for ultrasmall-sized nanomechanical devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

In situ electron microscopy: atomic-scale dynamics of metal oxidation and corrosion

Corrosion degrades metals through complex microscopic processes that traditional methods often fail to capture. In-situ transmission electron microscopy (TEM) bridges this gap by providing real-time atomic-scale imaging of oxidation and corrosion dynamics. Gas-phase TEM uncovers critical oxidation mechanisms like oxide nucleation and alloying effects, while liquid-phase TEM tracks corrosion initiation. Coupled with emerging techniques like ultrafast direct electron detection cameras, these advancements promise unprecedented resolution in understanding material degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Phase segregation reversibility in mixed-metal hydroxide water oxidation catalysts

Achieving stable, low-cost electrocatalysts represents a daunting challenge towards practical water oxidation reactions. Here, we report that a degraded electrocatalyst can be revivified under catalytic operating conditions by manipulating reversible phase segregation. Under the oxygen evolution reaction conditions, Fe segregation develops in the Ni–Fe hydroxide host lat- tice, with the formation of FeOOH, resulting in an interface between the FeOOH and the host lattice. A dynamic metal dissolu- tion–redeposition process accelerates the Fe segregation and formation of the FeOOH secondary phase, resulting in catalyst deactivation. Operando synchrotron spectroscopic and microscopic analyses suggest that the phase segregation is revers- ible between the water oxidation potential and the catalyst reduction potential. Therefore, we have developed an intermittent reduction methodology to revivify the catalytic activity under the operating conditions, enhancing catalyst durability. The pres- ent study highlights that tailoring phase segregation at the catalyst/electrolyte interface constitutes an important strategy for revivifying and stabilizing catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Effect of magnetic fields on the methyl rotation in a paramagnetic cobalt( ii ) complex. Quasielastic neutron scattering studies

Molecular dynamics is a fundamental property of metal complexes. These dynamic processes, especially for paramagnetic complexes under external magnetic fields, are in general not well understood. Quasielastic neutron scattering (QENS) in 0–4 T magnetic fields has been used to study the dynamics of Co(acac) 2 (D 2 O) 2 (1- d 4 , acac = acetylacetonate). At 80–100 K, rotation of the methyl groups on the acac ligands is the dominant dynamical process. This rotation is slowed down by the magnetic field increase. Rotation times at 80 K are 5.6(3) × 10 –10 s at 0 T and 2.04(10) × 10 –9 s at 4 T. The QENS studies suggest that methyl groups in these paramagnetic Co(II) molecules do not behave as isolated units, which is consistent with results from earlier magnetic susceptibility studies indicating the presence of intermolecular interactions. DFT calculations show that unpaired electron spin density in 1 is dispersed to the atoms of both acac and H 2 O ligands. Methyl torsions in 1- d 4 have also been observed at 5–100 K in inelastic neutron spectroscopy (INS). In conclusion, the QENS and INS results here help understand the dynamics of the compound in the solid state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Kinetic simulations of gas breakdown in the dense plasma focus

We describe the first fully-kinetic, collisional, and electromagnetic simulations of the breakdown phase of a MA-scale dense plasma focus and are shown to agree with measured electrical characteristics, including breakdown time. In the model, avalanche ionization is driven by cathode electron emission and this results in incomplete gas breakdown along the insulator. This reinforces the importance of the conditioning process that creates a metallic layer on the insulator surface. The simulations, nonetheless, help explain the relationship between the gas pressure, the insulator length, and the coaxial gap width. In the past, researchers noted three breakdown patterns related to pressure. Simulation and analytic results show that at low pressures, long ionization path lengths lead to volumetric breakdown, while high pressures lead to breakdown across the relatively small coaxial electrode gap. In an intermediate pressure regime, ionization path lengths are comparable to the insulator length which promotes ideal breakdown along the insulator surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Electrostatically tuned dimensional crossover in LaAlO 3 /SrTiO 3 heterostructures

We report a gate-tunable dimensional crossover in sub-micrometer-scale channels created at the LaAlO 3 /SrTiO 3 interface. Conducting channels of widths 10 nm and 200 nm are created using conducting atomic force microscope lithography. Under sufficient negative back-gate tuning, the orbital magnetoconductance of the 200 nm channel is strongly quenched, and residual signatures of low-field weak-antilocalization become strikingly similar to that of the 10 nm channel. The dimensional crossover for the 200 nm channel takes place near the conductance quantum G = 2e 2 /h. The ability to tune the dimensionality of narrow LaAlO 3 /SrTiO 3 channels has implications for interpreting transport in a variety of gate-tunable oxide-heterostructure devices.

36 MATERIALS SCIENCE↗
DOE OSTI2018

On the dynamic tensile strength of an FCC metal

The tensile response of ductile, polycrystalline metals is often accompanied by the formation of pores within the material, which coalesce and fail a plane within a metal. This large deformation process is broadly progressive, with a physical path consisting of nucleation, growth, coalescence, and failure, which occur individually over short periods of time. Thus distinct micro-mechanisms operate, each influenced by microstructure, loading path, and loading profile, which remains a significant challenge to represent and predict numerically at the macroscale. In a previous study, the influence of loading path on damage evolution in high-purity tantalum has been presented; in this paper, complimentary measurements are made on a pure, FCC copper. Samples were shock loaded to three different peak stresses using both symmetric impact, and two different composite flyer plate configurations, such that upon unloading, the three samples were subject to nearly identical tensile loading. The damage evolution in the soft-recovered copper samples was then quantified using optical metallography and electron-back-scatter diffraction. We shall compare metallurgical observations, velocimetry histories and simulations to discuss the dynamic failure mechanics observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Characterization and nondestructive inspection of additively manufactured materials

Additively manufactured (AM) components often exhibit significant discontinuities and indications without a clear understanding of how they might affect the mechanical properties of a part during qualification and service. This uncertainty is unacceptable for the design and manufacturing of most aerospace components. Current research in both mechanical testing and nondestructive evaluation involves developing methods for characterizing and inspecting AM components as the use of such materials continues to rise. Although several AM manufacturing methods have been developed in recent decades, this paper focuses on AM production-ready processes for a direct metal laser sintering (DMLS) powder bed fusion machine and will provide background on Sandia National Laboratories’ research efforts in this area. Tensile bar samples manufactured using the DMLS powder bed fusion method were inspected in this study, and the results of ultrasonic spectroscopy for assessing internal flaws will be presented. A combination of material property evaluation, microstructural characterization, and nondestructive inspection techniques will also be described. Finally, the results obtained from these material evaluation methods assist in determining inspection limits and methods for qualifying AM materials.

36 MATERIALS SCIENCE↗