Search NASA⌕ Search

SEARCH · Search NASA

Results for “dissolution rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Accelerated Leach Testing of Glass (ALTGLASS): II. Mineralization of hydrogels by leachate strong bases

The durability of high level nuclear waste glasses must be predicted on geological time scales. Waste glass surfaces form hydrogels when in contact with water for varying test durations. As the glass hydrogels age, some exhibit an undesirable resumption of dissolution at long times while others exhibit near steady-state dissolution, that is, nonresumption of dissolution. Resumption of dissolution is associated with the formation of zeolitic phases while nonresumption of dissolution is associated with the formation of clay minerals. Hydrogels with a stoichiometry close to that of imogolite, (Al 2 O 3 ·Si(OH) 4 ), with ferrihydrite (Fe 2 O 3 ·0.5H 2 O), have been shown to be associated with waste glasses that resume dissolution. Aluminosilicate hydrogels with a stoichiometry of allophane-hisingerite ((Al,Fe) 2 O 3 ·1.3-2Si(OH) 4 ) have been shown to be associated with waste glasses that exhibit near steady-state dissolution at long times. These phases are all amorphous and poorly crystalline and are also found on natural weathered basalt glasses. Interaction of these hydrogels with excess alkali and OH – (strong base) in the leachates, causes the Al 2 O 3 · n SiO 2 (where n=1-2) hydrogels to mineralize to zeolites. Excess alkali in the leachate is generated by alkali in the glass. As a result, preliminary rate-determining leach layer forming exchange reactions are hypothesized based on these findings.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The timescales of mineral redox reactions

Redox-reactive minerals can serve as electron donors or acceptors for abiotic reactants or microbial metabolic processes, and hence can play important roles in terrestrial and aquatic environments, particularly if their reaction rates are comparable to those of other biogeochemical processes. Under such circumstances, their reactions can control metal and contaminant bioavailability and change the permeability of soils and sediments. While the thermodynamic driving force for a mineral redox reaction is frequently a good predictor of relative rates of reaction, there are many examples in which kinetic factors limit reaction rate. Understanding the thermodynamic and kinetic aspects of mineral reaction rates, and their sensitivity to environmental conditions such as temperature or pH, is important for anticipating the biogeochemical evolution of natural environments subjected to change. Achieving this goal requires knowledge of the reaction pathway, the timescales of intermediate steps, and the lifetimes of metastable reaction states. Mineral redox reactions proceed through a combination of steps that can include electron and proton transfer, the breaking or formation of bonds, and mineral dissolution or phase transformation. The combination of conventional kinetics approaches, newly-developed ultrafast time-resolved methods and molecular simulation can provide elucidation of such complex reaction pathways. This chapter summarizes key concepts in mineral and interfacial redox reactions with illustrations from the rich geochemistry of iron and ironbearing minerals.

58 GEOSCIENCES↗

Reaction mechanisms for enhancing mineral sequestration of CO{sub 2}

Storage of CO{sub 2} through mineral sequestration using olivine has been shown to produce environmentally benign carbonates. However, due to the formation of a rate-limiting reaction product layer, the rate of reaction is insufficient for large-scale applications. We report the results of altering the reactant solution composition and the resultant reaction mechanism to enhance the reaction rate. The products were analyzed for total carbon content with thermal decomposition analysis, product phase compositions with Debye-Scherrer X-ray powder diffraction (XRD), surface morphology with scanning electron microscopy (SEM), and composition with energy dispersive X-ray spectroscopy (EDXS). Carbon analysis showed that an increase in bicarbonate ion activity increased the olivine to carbonate conversion rate. The fastest conversion rate, 63% conversion in one hour, occurred in a solution of 5.5 M KHCO{sub 3}. Additionally, SEM confirmed that when the bicarbonate ion activity was increased, magnesium carbonate product particles significantly increased in both number density and size and the rate passivating-reaction layer exfoliation was augmented. 30 refs., 5 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Geoscience Perspectives in Carbon Sequestration - Educational Training and Research Through Classroom, Field, and Laboratory Investigations

The most effective mechanism to limit CO 2 release from underground Geologic Carbon Sequestration (GCS) sites over multi-century time scales will be to convert the CO 2 into solid carbonate minerals. This report describes the results from four independent research investigations on carbonate mineralization: 1) Colloidal calcite particles forming in Maramec Spring, Missouri, provide a natural analog to evaluate reactions that may occur in a leaking GCS site. The calcite crystals form as a result of physiochemical changes that occur as the spring water rises from a depth of more than 190'. The resultant pressure decrease induces a loss of CO 2 from the water, rise in pH, lowering of the solubility of Ca 2+ and CO 3 2- , and calcite precipitation. Equilibrium modelling of the spring water resulted in a calculated undersaturated state with respect to calcite. The discontinuity between the observed occurrence of calcite and the model result predicting undersaturated conditions can be explained if bicarbonate ions (HCO 3 - ) are directly involved in precipitation process rather than just carbonate ions (CO 3 2- ). 2) Sedimentary rocks in the Oronto Group of the Midcontinent Rift (MCR) system contain an abundance of labile Ca-, Mg-, and Fe-silicate minerals that will neutralize carbonic acid and provide alkaline earth ions for carbonate mineralization. One of the challenges in using MCR rocks for GCS results from their low porosity and permeability. Oronto Group samples were reacted with both CO 2 -saturated deionized water at 90°C, and a mildly acidic leachant solution in flow-through core-flooding reactor vessels at room temperature. Resulting leachate solutions often exceeded the saturation limit for calcite. Carbonate crystals were also detected in as little as six days of reaction with Oronto Group rocks at 90oC, as well as experiments with forsterite-olivine and augite, both being common minerals this sequence. The Oronto Group samples have poor reservoir rock characteristics, none ever exceeded a permeability value of 2.0 mD even after extensive dissolution of calcite cement during the experiments. The overlying Bayfield Group – Jacobsville Formation sandstones averaged 13.4 ± 4.3% porosity and a single sample tested by core-flooding revealed a permeability of ~340 mD. The high porosity-permeability characteristics of these sandstones will allow them to be used for GCS as a continuous aquifer unit with the overlying Mt. Simon Formation. 3) Anaerobic sulfate reducing bacteria (SRB) can enhance the conversion rate of CO 2 into solid minerals and thereby improve long-term storage. SRB accelerated carbonate mineralization reactions between pCO 2 values of 0.0059 and 14.7 psi. Hydrogen, lactate and formate served as suitable electron donors for SRB metabolism. The use of a 13 CO 2 spiked gas source also produced carbonate minerals with ~53% of the carbon being derived from the gas phase. The sulfate reducing activity of the microbial community was limited, however, at 20 psi pCO 2 and carbonate mineralization did not occur. Inhibition of bacterial metabolism may have resulted from the acidic conditions or CO 2 toxicity. 4) Microbialite communities forming in the high turbidity and hypersaline water of Storrs’ Lake, San Salvador Island, The Bahamas, were investigated for their distribution, mineralogy and microbial diversity. Molecular analysis of the organic mats on the microbialites indicate only a trace amount of cyanobacteria, while anaerobic and photosynthetic non-sulfur bacteria of the phyla Chloroflexi and purple sulfur bacteria of class Gammaproteobacteria were abundant.

54 ENVIRONMENTAL SCIENCES↗

Quantitative assessment of soil CO 2 concentration and stable carbon isotope for leakage detection at geological carbon sequestration sites

This paper presents a quantitative method to evaluate CO 2 concentration ([CO 2 ]) and stable carbon isotope ratio (δ 13 C) as indicators for leakage detection at a geological carbon sequestration site by combining use of field release tests and a numerical modeling approach. A numerical model was developed to simulate CO 2 dynamics by considering diffusion, dissolution in soil water, and soil respiration. The numerical model fits the background dynamics of [CO 2 ] (360 to 550 ppm) and δ 13 C (-16‰ to -6‰) well and reproduces fairly the overall trend observed during the CO 2 release test. The model was further applied to assess detection probability (DP) of [CO 2 ] and δ 13 C for leakage detection in terms of various factors, such as CO 2 leakage rate, background variations, δ 13 C of the CO 2 leaked, and the threshold value of signal-to-noise ratio. Modeling results suggest that δ 13 C may have a higher DP than [CO 2 ]. This study also shows that DP of δ 13 C for the IEA Weyburn project is close to 0, implying δ 13 C is inappropriate to be an indicator for CO 2 leakage at the site. Finally, the quantitative method developed can also be used to design a monitoring plan or strategy in a near-surface environment for geological carbon sequestration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THE CHEMICAL EVOLUTION OF THE URSA MINOR DWARF SPHEROIDAL GALAXY

We present an abundance analysis based on high-resolution spectra of 10 stars selected to span the full range in metallicity in the Ursa Minor (UMi) dwarf spheroidal (dSph) galaxy. We find that [Fe/H] for the sample stars ranges from -1.35 to -3.10 dex. Combining our sample with previously published work for a total of 16 luminous UMi giants, we establish the trends of abundance ratios [X/Fe] as functions of [Fe/H] for 15 elements. In key cases, particularly for the {alpha}-elements, these trends resemble those for stars in the outer part of the Galactic halo, especially at the lowest metallicities probed. The neutron-capture elements show an r-process distribution over the full range of Fe metallicity reached in this dSph galaxy. This suggests that the duration of star formation in the UMi dSph was shorter than in other dSph galaxies. The derived ages for a larger sample of UMi stars with more uncertain metallicities also suggest a population dominated by uniformly old ({approx}13 Gyr) stars, with a hint of an age-metallicity relationship. Upon comparing our results for UMi, our earlier work in Draco, and published studies of more metal-rich dSph Galactic satellites, there appears to be a pattern of moving from a chemical inventory for dSph giants with [Fe/H] {approx}<-2 dex, which is very similar to that of stars in the outer part of the Galactic halo (enhanced {alpha}/Fe relative to the Sun, coupled with subsolar [X/Fe] for the heavy neutron-capture elements and r-process domination), switching to subsolar {alpha}-elements and super-solar s-process-dominated neutron-capture elements for the highest [Fe/H] dSph stars. The combination of low star formation rates over a varying and sometimes extended duration that produced the stellar populations in the local dSph galaxies with [Fe/H] > - 1.5 dex leads to a chemical inventory wildly discrepant from that of any component of the Milky Way. We note the presence of two UMi giants with [Fe/H] <-3.0 dex in our sample and reaffirm that the inner Galactic halo could have been formed by early accretion of Galactic satellite galaxies and dissolution of young globular clusters, while the outer halo could have formed from those satellite galaxies that accreted somewhat later.

79 ASTRONOMY AND ASTROPHYSICS↗

Towards High Performance Oxide-Dispersion-Strengthened Alloys

The current first-generation candidate swelling-resistant alloys envisioned to replace austenitics are ferritic and ferritic-martensitic steels, with second-generation alloys being yttria dispersion-hardened variants of these steels. In ferritic-martensitic alloys, ferrite grains always swell earlier than martensite. Currently, most oxide dispersion-strengthened (ODS) alloys have only a ferrite matrix, thus giving up the first line of defense against swelling provided by tempered martensite. Towards development of better swelling-resistant ODS alloys, dual phase (ferrite + martensite) ODS alloys with oxide particles uniformly distributed in both ferrite and martensite phases is needed. Furthermore, fundamental understanding on mechanisms governing dispersoid stability and its correlation with void swelling is greatly needed. We reported here further alloy improvement by exploring new 9Cr ODS alloy with majority of oxide dispersoids uniformly distributed in tempered martensite grains. The alloy was irradiated by 3.5 MeV Fe self ions up to 600 dpa (displacements per atom) and at temperatures ranging from 325 to 625 deg. C. According to SRIM code, the dpa profile peaks at about 1000 nm. First of all, ion irradiation reduces the dispersoid sizes. The dispersoid sizes begin to increase beyond ∼1000 nm. Second, higher irradiation temperatures result in larger dispersoids on average. Third, there is no significant dispersoid size difference between 100 and 200 dpa irradiation. The equilibrium sizes are quickly saturated. Size and coherency of a dispersoid is closely related. In martensite grains, fine dispersoids tend to be coherent while coarse dispersoids tend to incoherent. We found that at a low irradiation temperature, coherent small dispersoids become smaller and their interface coherency remains. In a comparison, incoherent large dispersoids disappear after irradiation. At an intermediate irradiation temperature, the final equilibrium dispersoid sizes increase. At a high irradiation temperature, the final dispersoid sizes further increase and some large semi-coherent dispersoids survive. In ferrite grains, as-received dispersoids are relatively smaller in comparison with martensite grains. Their equilibrium size changes after irradiation follow a similar trend but large dispersoids completely disappear even under high temperature ion irradiation. We propose a model to explain the above dispersoid size changes under various irradiation conditions. The model considers the competing effects between ballistic-collision- assisted dispersoid dissolution into matrix and thermally driven back-diffusion for recovery. When the competing reaches a balance, an equilibrium size distribution curve is determined. For dispersoids smaller than the equilibrium size, they grow upon ion irradiation. Large dispersoids may shrink and reach the equilibrium size but ultra-large ones will completely disappear if they shrinkage paths are far away from the curve. The model further considers the complexity from the dpa rates, and damage cascade morphology.

36 MATERIALS SCIENCE↗

Structure and Dynamics for LiBH4-LiCl Solid Solutions

A surprisingly high degree of structural and compositional dynamics is observed in the system LiBH{sub 4}-LiCl as a function of temperature and time. Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data reveals that Cl{sup -} readily substitutes for BH{sub 4}{sup -} in the structure of LiBH{sub 4}. Prolonged heating a sample of LiBH{sub 4}-LiCl (1:1 molar ratio) above the phase transition temperature and below the melting point (108 < T < 275 C) can produce highly chloride substituted hexagonal lithium borohydride, h-Li(BH{sub 4}){sub 1-x}Cl{sub x}, e.g., x {approx} 0.42, after heating from room temperature (RT) to 224 C at 2.5 C/min. LiCl has a higher solubility in h-LiBH{sub 4} as compared to orthorhombic lithium borohydride, o-LiBH{sub 4}, which is illustrated by a LiBH{sub 4}-LiCl (1:1) sample equilibrated at 245 C for 24 days and left at RT for another 13 months. Rietveld refinement reveals that this sample contains o-Li(BH{sub 4}){sub 0.91}Cl{sub 0.09} and LiCl. This illustrates a significantly faster dissolution of LiCl in h-LiBH{sub 4} as compared to a slower segregation of LiCl from o-LiBH{sub 4}, which is also demonstrated by in situ SR-PXD from three cycles of heating and cooling of the same Li(BH{sub 4}){sub 0.91}Cl{sub 0.09} sample. The substitution of the smaller Cl{sup -} for the larger BH{sub 4}{sup -} ion is clearly observed as a reduction in the unit cell volume as a function of time and temperature. A significant stabilization of h-LiBH{sub 4} is found to depend on the degree of anion substitution. Variable temperature solid-state magic-angle spinning (MAS) {sup 7}Li and {sup 11}B NMR experiments on pure LiBH{sub 4} show an increase in full width at half maximum (fwhm) when approaching the phase transition from o- to h-LiBH{sub 4}, which indicates an increase of the relaxation rate (i.e., T{sub 2} decreases). A less pronounced effect is observed for ion-substituted Li(BH{sub 4}){sub 1-x}Cl{sub x}, 0.09 < x < 0.42. The MAS NMR experiments also demonstrate a higher degree of motion in the hexagonal phase, i.e., fwhm is reduced by more than a factor of 10 at the o- to h-LiBH{sub 4} phase transition.

36 MATERIALS SCIENCE↗

Kinetic model for quartz and spinel dissolution during melting of high-level-waste glass batch

The dissolution of quartz particles and the growth and dissolution of crystalline phases during the conversion of batch to glass potentially affects both the glass melting process and product quality. Crystals of spinel exiting the cold cap to molten glass below can be troublesome during the vitrification of iron-containing high-level wastes. To estimate the distribution of quartz and spinel fractions within the cold cap, we used kinetic models that relate fractions of these phases to temperature and heating rate. Fitting the model equations to data showed that the heating rate, apart from affecting quartz and spinel behavior directly, also affects them indirectly via concurrent processes, such as the formation and motion of bubbles. Because of these indirect effects, it was necessary to allow one kinetic parameter (the pre-exponential factor) to vary with the heating rate. The resulting kinetic equations are sufficiently simple for the detailed modeling of batch-to-glass conversion as it occurs in glass melters. The estimated fractions and sizes of quartz and spinel particles as they leave the cold cap, determined in this study, will provide the source terms needed for modeling the behavior of these solid particles within the flow of molten glass in the melter.

Batch melting, Cold cap, Quartz, Spinel, Waste gla↗

Microbial community response and SDS-PAGE reveal possible mechanism of waste activated sludge acidification enhanced by microaeration coupled thermophilic pretreatment

Aiming to strengthen the performance of waste activated sludge digestion, pretreatment is a prerequisite for keeping operations within an industrially acceptable time- frame. The performance of microaeration coupled with thermophilic (MT) pretreatment on waste activated sludge solubilization and acidification was investigated. The results showed that the maximum soluble organics concentrations, including soluble proteins and carbohydrates, reached 2290 mg COD/L in 24 h when the ventilation rate and temperature were 0.05 vvm and 70 °C. SDS-polyacrylamide gel electrophoresis (SDS-PAGE) test on pure-culture (E.coli) and scanning electron microscopy analysis indicated that MT pretreatment effectively destroyed microbial cell wall and resulted in an increase in soluble proteins. Polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) analysis revealed that MT pretreatment reduced the diversity of the bacterial community during pretreatment. Along with the dissolution of a large quantity of organic matter, microbial species such as Lactococcus and Methyloversatilis bloomed at the end of acidification period, which contributed to SCFAs production. Finally, this study revealed that MT pretreatment facilitated the WAS hydrolysis efficiency and enhanced SCFAs (3149 mg COD/L with fermentation for 96 h) production, especially for acetic acid (50%) accumulation, which provides a new perspective for the application and recovery of sludge resources.

59 BASIC BIOLOGICAL SCIENCES↗

Simulating Droplet-Resolved Haze and Cloud Chemistry Forming Secondary Organic Aerosols in Turbulent Conditions within Laboratory and Cloud Parcels

Most of our existing knowledge of cloud chemistry in regards to forming secondary organic aerosols (SOA) is based on measurements in bulk aqueous solutions. However, SOA reaction kinetics derived from bulk solution measurements might differ from the kinetics in actual cloud droplets, since turbulent mixing and ionic strengths, and ratio of surface area to volume in individual cloud droplets might vary substantially from bulk solutions in the real atmosphere. Three-dimensional models at various scales have been used to simulate aqueous chemistry. However, most of these models do not resolve turbulence down to the smallest length scales of 1 mm and do not simulate cloud chemistry in individual cloud droplets due to large computational costs. Here we incorporate the formation of isoprene epoxydiol SOA (IEPOX-SOA) in individual droplets within a one-dimensional explicit mixing parcel model (EMPM-Chem). We apply EMPM-Chem to simulate turbulence and droplet-resolved IEPOX-SOA formation using a configuration based on the Michigan Tech Pi chamber. We find that the dissolution of IEPOX gases is weighted more towards larger cloud droplets due to their large liquid water content (compared to smaller droplets), while the conversion of dissolved IEPOX to IEPOX-SOA is much greater within smaller deliquesced haze particles due to their higher acidity and ionic strengths compared to cloud droplets. We also find that as droplet residence times increase in the chamber, e.g., due to increasing ammonium bisulfate seed aerosol injection rates and/or increasing heights of the chamber, formation of IEPOX-SOA increases substantially. Thus, our EMPM-Chem model could be used to design future cloud chambers to maximize SOA production from cloud chemistry. We also apply the EMPM-Chem model to simulate how IEPOX-SOA formation evolves in individual cloud droplets within rising cloudy parcels in the atmosphere. We find that as subsaturated air is entrained into and turbulently mixed with the cloud parcel, evaporation causes a reduction in droplet sizes, which leads to corresponding increases in per droplet ionic strength and acidity. Increased droplet acidity in turn greatly accelerates the kinetics of IEPOX-SOA formation. In conclusion, our results provide key insights into single-cloud-droplet chemistry, suggesting that entrainment mixing may be an important process that increases SOA formation in the real atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Improved Application of Local Models to Steel Corrosion in Lead-Bismuth Loops

The corrosion of steels exposed to flowing liquid metals is influenced by local and global conditions of flow systems. The present study improves the previous local models when applied to closed loops by incorporating some global condition effects. In particular the bulk corrosion product concentration is calculated based on balancing the dissolution and precipitation in the entire closed loop. Mass transfer expressions developed in aqueous medium and an analytical expression are tested in the liquid-metal environments. The improved model is applied to a pure lead loop and produces results closer to the experimental data than the previous local models do. The model is also applied to a lead-bismuth eutectic (LBE) test loop. Systematic studies illustrate the effects of the flow rate, the oxygen concentration in LBE, and the temperature profile on the corrosion rate.

36 MATERIALS SCIENCE↗

Adsorption and chemical reaction of gaseous mixtures of hydrogen chloride and water on aluminum oxide and application to solid-propellant rocket exhaust clouds

Hydrogen chloride (HCl) and aluminum oxide (Al2O3) are major exhaust products of solid rocket motors (SRM). Samples of calcination-produced alumina were exposed to continuously flowing mixtures of gaseous HCl/H2O in nitrogen. Transient sorption rates, as well as maximum sorptive capacities, were found to be largely controlled by specific surface area for samples of alpha, theta, and gamma alumina. Sorption rates for small samples were characterized linearly with an empirical relationship that accounted for specific area and logarithmic time. Chemisorption occurred on all aluminas studied and appeared to form from the sorption of about a 2/5 HCl-to-H2O mole ratio. The chemisorbed phase was predominantly water soluble, yielding chloride/aluminum III ion mole ratios of about 3.3/1 suggestive of dissolved surface chlorides and/or oxychlorides. Isopiestic experiments in hydrochloric acid indicated that dissolution of alumina led to an increase in water-vapor pressure. Dissolution in aqueous SRM acid aerosol droplets, therefore, might be expected to promote evaporation.

Cofer, W. R., III↗

Return of the coral reef hypothesis - Basin to shelf partitioning of CaCO3 and its effect on atmospheric CO2

CaCO3 deposition rates in shallow water are assumed to vary in a sawtoothed manner about a long-term average deposition rate of 8 x 10 exp 12 mol/yr. It is proposed that rising sea level serves as the driving mechanism for changing the locus of CaCO3 deposition from deep sea to shallow shelf. Deposition on the shelves occurs when sea level is rising, while shelf carbonates dissolve when sea level is falling. It is shown that this mechanism alone can account for variations of atmospheric CO2 and can contribute to the pelagic carbonate dissolution cycles observed in the equatorial Pacific.

Opdyke, Bradley N.↗

Atomic-scale constituting stable interface for improved LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathodes of lithium-ion batteries

Ascribed to their higher capacity and lower cost compared to conventional LiCoO 2 , the Ni-rich layered LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) is now considered as one promising cathode for lithium-ion batteries (LIBs). However, it still suffers from some evident performance degradation, especially under high cutoff voltages (i.e., >4.3 V versus Li/Li + ). The performance degradation typically is exhibited as capacity fading and voltage drop, mainly originating from an instable interface between the NMC622 and electrolyte as well as the evolution of the NMC structure. To improve the interfacial and structural stability of NMC cathodes, herein we deposited an ultrathin layer of Al 2 O 3 coatings (<5 nm) conformally over NMC622 composite electrodes directly using atomic layer deposition (ALD). It was found that, under different upper cutoff voltages (4.3, 4.5, and 4.7 V), the ALD Al 2 O 3 coatings enable enhanced performance of NMC622 cathodes with better cyclability and higher capacity. Particularly, the beneficial effects of the ALD Al 2 O 3 coatings are more remarkable at higher upper cutoff voltages (4.5 and 4.7 V). Furthermore, the ALD coatings can significantly improve the rate capability of NMC622. To this end, we utilized a suite of characterization tools and performed a series of electrochemical tests to clarify the effects of the ALD Al 2 O 3 coatings. This study revealed that the beneficial effects of the Al 2 O 3 ALD coatings are multiple: (i) serving as an artificial layer of solid electrolyte interphase to mitigate undesirable interfacial reactions; (ii) acting as a physical barrier to inhibit metal dissolution of NMC; and (iii) forming a reinforced networked overcoating to boost the mechanical integrity of NMC cathodes. This study is favorable for designing high-performance NMC cathodes.

25 ENERGY STORAGE↗

On the Source of Conductivity in Alkaline Zn Anodes: Zn Percolation and ZnO Bridging

Alkaline Zn anodes are fundamental to commercial Zn-MnO 2 batteries as well as emerging rechargeable designs. In these electrodes, Zn particles are both the active material and source of electronic conduction. However, there are known cases in which electronic connectivity between Zn particles or the current collecting pin is lost even though the battery continues to function. Here we use X-ray computed tomography (CT) of AA batteries to demonstrate several examples of Zn particle-to-particle connectivity breakdown, which is observed even in cases at relatively high discharge rate. This indicates maintenance of the electronic network through the less-conductive ZnO discharge product. We introduce a new equation for electronic conductivity maintained through bridges of ZnO formed between percolating Zn particles. This necessitates discarding the Bruggeman correlation and instead redefining effective electronic conductivity using percolation theory. We demonstrate that such a model for conduction enables prediction of an inverted reaction zone, which is an experimentally observed case in which significant Zn dissolution and ZnO formation occurs heavily near the current collecting pin. Current computational Zn-MnO 2 models never predict an inverted reaction zone, and thus the updated conductivity enables models to accurately explain a wider range of experimental conditions.

Guida, Dominick P. [Northeastern Univ., Boston, MA↗

Design Optimization of Liquid Fueled High Velocity Oxy- Fuel Thermal Spraying Technique for Durable Coating for Fossil Power Systems

High-velocity oxy–fuel (HVOF) thermal spraying was developed in 1930 and has been commercially available for twenty-five years. HVOF thermal spraying has several benefits over the more conventional plasma spray technique including a faster deposition rate which leads to quicker turn-around, with more durable coatings and higher bond strength, hardness and wear resistance due to a homogeneous distribution of the sprayed particles. HVOF thermal spraying is frequently used in engineering to deposit cermets, metallic alloys, composites and polymers, to enhance product life and performance. HVOF thermal spraying system is a highly promising technique for applying durable coatings on structural materials for corrosive and high temperature environments in advanced ultra-supercritical coal- fired (AUSC) boilers, steam turbines and gas turbines. HVOF thermal spraying is the preferred method for producing coatings with low porosity and high adhesion. HVOF thermal spray process has been shown to be one of the most efficient techniques to deposit high performance coatings at moderate cost. Variables affecting the deposit formation and coating properties include hardware characteristics such as nozzle geometry and spraying distance and process parameters such as equivalence ratio, gas flow density, and powder feedstock. In the spray process, the powder particles experience very high speeds combined with fast heating to the powder material melting point or above. This high temperature causes evaporation of the powder, dissolution, and phase transformations. Due to the complex nature of the HVOF technique, the control and optimization of the process is difficult. In general, good coating quality with suitable properties and required performance for specific applications is the goal in producing thermal spray coatings. In order to reach this goal, a deeper understanding of the spray process as a whole is needed. Although many researchers studied commercial HVOF thermal spray systems, there exists a lack of fundamental understanding of the effect of hardware characteristics and operating parameters on HVOF thermally sprayed coatings. Motivated by these issues, this study is devoted to investigate the effect of hardware characteristics (e.g. spraying distance) and operating parameters (e.g. combustion chamber pressure, equivalence ratio, and total gas flow rate) on HVOF sprayed coatings using Inconel 718 alloy. The current study provides extensive understanding of several key operating and process parameters to optimize the next generation of HVOF thermally sprayed coatings for high temperature and harsh environment applications. A facility was developed to support this endeavor in a safe and efficient way, including a HVOF thermal spray system with a Data Acquisition and Remote Controls system (DARCS). The coatings microstructure and morphology were examined using X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM) and Nanoindentation.

20 FOSSIL-FUELED POWER PLANTS↗

Investigation on Microstructural Evolutions and Mechanical Properties of P92 Steel During Thermal Processing

The evolution of the microstructure of P92 steel during heat processing has a significant effect on the final performance of steel products and is thus an area of critical interest. Accordingly, the grain growth behavior of austenite and δ-ferrite changes in P92 steel is comprehensively investigated in this study through thermodynamic calculations and physical simulation. The results show that the A{sub C1}, A{sub C3} and γ–δ transformation temperatures of P92 steel are 841 °C, 878 °C and 1095 °C, respectively, which are comparable to the measured values of 850 °C, 879 °C and 1175 °C, respectively. When the temperature exceeds the A{sub C1} temperature, the austenite grain size increases with increasing temperature and longer holding times, and the growth rate of austenite grains increases with higher temperatures but decreases with holding time at a certain temperature. A model that shows the austenite grain growth kinetics is established: D{sup n} − D{sub 0}{sup n} = 2.03 × 10{sup 16}exp(− 498,770/RT)t, in which the time exponent n decreases from 4.52 to 2.11 with an increase in temperature from 1000 °C to 1200 °C due to the reduced pinning effect resultant of the dissolution of precipitates, M{sub 23}C{sub 6}, VX and NbX at 887 °C, 1073 °C and 1200 °C, respectively. The formation of δ-ferrite at 1200 °C when held for 600 s and 1300 °C when held for 60 ~ 600 s causes a smaller austenite grain size. The relationship between the evolution of the microstructure of P92 steel and the mechanical properties is also studied. The results show that the prior austenite grain size has an inverse relationship with impact energy and ultimate tensile strength at 620 °C, while the presence of soft δ-ferrite leads to a reduction in the microhardness, impact energy and ultimate tensile strength at 620 °C.

36 MATERIALS SCIENCE↗