Search NASA⌕ Search

SEARCH · Search NASA

Results for ““Soft” Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Tailored Silicone Network Architecture for Ultimate Mechanical Reinforcement

Hydrosilylation cured silicone elastomers are subject to reaction inefficiency, leading to incomplete and non-uniform crosslink networks, restricting the potential of mechanical reinforcement. This work investigates pre-synthesized, functional PDMS architectures as additives to improve ultimate mechanical performance relative to conventional single-step curing. Three custom, functional structures were prepared: a partially crosslinked PDMS scaffold (Structure A), a bottle-brush PDMS (Structure B), and a star-shaped PDMS derived from an MQ resin (Structure C). Rheological characterization was used to identify the ultimate design space and proper stoichiometric ratio for Structure A, and confirm successful formation of all structures for suitable incorporation into a base silicone formulation at 30wt%. Mechanical tests indicated that all three structures increased in ultimate tensile strength relative to their single-step counterparts, with Structure A providing additional improvements to toughness (432 vs. 258 kJ/m3) and ultimate elongation (158 vs. 115%). Furthermore, Structure B remained very soft in the unfilled state, while Structure C provided hardness (23 vs. 18 Shore A) and stiffness (780 vs. 420 kPa Young’s modulus) increases. In silica filled systems, Structure A retained increased strength but reduced elongation, while Structure B indicated strong reinforcement in terms of strength, toughness, and stiffness. Thermal analysis on the cure profiles of these materials suggested that pre-formation of network architectures enable a more complete reaction than a single-step process (15.9 vs. 15.1 J/g). Ultimately, these results indicate that tailoring PDMS architecture before the final cure can improve ultimate mechanical properties via improved network development in silicone elastomers. Furthermore, this work offers a promising strategy for designing higher-performance, more tunable silicone formulations.

36 MATERIALS SCIENCE↗
NASA NTRS1979

Soft X-ray spectrum and structure of the supernova remnant G65.2+5.7

The HEAO 1 low energy detectors have observed the supernova remnant G65.2+5.7 in the energy range 0.2-2.5 keV. A strong, extended source of X-ray emission is observed coincident with the eastern side of the optical filamentary structure. The characteristic temperature of the emission is in the range 2-3.8 x 10 to the 6th K, and evidence is found for line emission at about 0.8 keV in the X-ray spectrum. These observations imply a shock velocity (425 km/s) and age (about 20,000 yr) that markedly disagree with the estimates from optical and radio observations.

Mason, K. O.↗
NASA NTRS1980

The soft X-ray diffuse background and the structure of the local interstellar medium

Data from five rocket flights of the Wisconsin soft X-ray sky survey, covering the southern galactic hemisphere with 6.5 deg spatial resolution between 0.1 and 2.0 keV, are presented as intensity maps. Analysis of the data in two energy bands below 0.3 keV is presented here. These low-energy X-rays appear to be emitted from a plasma of about one-million K, the bulk of which is closer to the sun than even the nearest 5 x 10 to the 19th/sq cm of neutral gas. No evidence is found for the presence of nearby small (radius of about 0.6 pc) clouds of cool neutral gas, as has been proposed by McKee and Ostriker (1977). The X-ray measurements are consistent with the small amounts of local neutral material inferred from Lyman-alpha absorption measurements.

Fried, P. M.↗
DOE OSTI2021

Colloquium : Physical properties of group-IV monochalcogenide monolayers

The state-of-the-art knowledge of ferroelectric and ferroelastic group-IV monochalcogenide monolayers is surveyed. These semiconductors feature remarkable structural and mechanical properties, such as a switchable in-plane spontaneous polarization, soft elastic constants, structural degeneracies, and thermally driven two-dimensional structural transformations. Additionally, these 2D materials display selective valley excitations, valley Hall effects, and persistent spin helix behavior. After a description of their Raman spectra, a discussion of optical properties arising from their lack of centrosymmetry (such as an unusually strong second-harmonic intensity, large bulk photovoltaic effects, photostriction, and tunable exciton binding energies) is provided as well. Here, the physical properties observed in these materials originate from (correlate with) their intrinsic and switchable electric polarization, and the physical behavior hereby reviewed could be of use in nonvolatile memory, valleytronic, spintronic, and optoelectronic devices: these 2D multiferroics enrich and diversify the 2D material toolbox.

2D ferroelectrics↗
DOE OSTI2021

Making the most of your electrons: Challenges and opportunities in characterizing hybrid interfaces with STEM

Inspired by the unique architectures composed of hard and soft materials in natural and biological systems, synthetic hybrid structures and associated hard-soft interfaces have recently evoked significant interest. Soft matter is typically dominated by structural fluctuations even at room temperature, while hard matter is governed by rigid mechanical behavior. This dichotomy offers considerable opportunities to leverage the disparate properties offered by these components across a wide spectrum spanning from basic science to engineering insights with significant technological overtones. Such hybrid structures, which include polymer nanocomposites, DNA functionalized nanoparticle superlattices, and metal organic frameworks to name a few, have delivered promising insights into the technologically relevant applications such as catalysis, environmental remediation, optoelectronics, and medicine. The interfacial structure between the hard and soft phases demonstrates features across a variety of length scales and often strongly influence the functionality of hybrid systems. While scanning/transmission electron microscopy (S/TEM) has proven to be a valuable tool for acquiring intricate molecular and nanoscale details of these interfaces, the unusual nature of hybrid composites presents a suite of challenges that make assessing or establishing structure–property relationships especially difficult. There are additional considerations at all stages of sample analysis from preparing electron-transparent samples to obtaining sufficient contrast to resolve the interface between dissimilar materials given the dose sensitivity of soft materials. Here, we discuss each of these challenges and supplement a review of recent developments in the field with additional experimental investigations and simulations to present solutions for attaining a nano or molecular-level understanding of these interfaces. These solutions present a host of opportunities for investigating the role interfaces play in this unique class of functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Supramolecular and Hybrid Bonding Polymers

Staudinger established a century ago the existence of covalent macromolecules, work that led to the development of transformative materials of great benefit to society and a “quantum leap” in our understanding of biological systems. Over the past few decades the concept of supramolecular polymers has emerged–chemical systems in which structural units bond strongly to each other non-covalently. Herein, we discuss how these dynamic systems actually exist in the natural world and can create soft materials with structures, properties, and functions beyond the ones we know in Staudinger polymers. We reflect here on the potential of novel systems in which covalent and supramolecular polymers are chemically integrated and describe them as hybrid bonding polymers. This paper describes the concept with recent examples from the Stupp laboratory, and discusses their potential functions as robotic materials that mimic living matter and structures that offer new ideas on how to recycle and reuse soft materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

Observations of the structure and evolution of solar flares with a soft X-ray telescope

One hundred thirty-two soft X-ray flare events have been observed with the S-056 X-ray telescope aboard Skylab. The observations are summarized, and a detailed discussion of the X-ray flare structures is presented. The data indicated that soft X-rays emitted by a flare come primarily from an intense well-defined core surrounded by a region of fainter more diffuse emission. Loop structures are found to constitute a fundamental characteristic of flare cores, and arcades of loops are found to play a more important role in flare phenomena than previously thought. Size distributions of these core features are presented, and a classification scheme describing the brightest flare X-ray features is proposed. Analysis of flare evolution indicates evidence for preliminary heating and energy release prior to the main phase of the flare. Core features are found to be remarkably stable and to retain their shape throughout a flare. Most changes in the overall configuration seem to be the result of the appearance, disappearance, or change in brightness of individual features, rather than the restructuring or reorientation of these features.

Vorpahl, J. A.↗
NASA NTRS1997

Post-flare loops embedded in a hot coronal fan-like structure

Limb events were demonstrated on the sun in which rising post-flare loops were embedded in hot structures looking in soft X-rays like fans of rays, formed during the flare and extending high into the corona. One of these structures is analyzed and it is suggested that these fans of rays represent temporary ministreamers, along which mass flows into interplanetary space. This suggestion is supported by maps of solar wind density constructed from scintillation measurements.

Svestka, Z.↗
DOE OSTI2026

Locating the atoms at the hard-soft interface of gold nanoparticles

Surface structure affects the growth, shape and properties of nanoparticles. In wet chemical syntheses, metal additives and surfactants are used to modify surfaces and guide nanocrystal growth. To understand this process, it is critical to understand how the surface structure, and hence its energy, is modified. However, measuring the type and arrangement of atoms at hard-soft interfaces on nanoscale surfaces, especially in the presence of surfactants, is extremely challenging. Here, we determine the atomic structure of the hard-soft interface in a metallic nanoparticle by developing low-dose imaging conditions in four-dimensional scanning transmission electron microscopy that are preferentially sensitive to surface adatoms. By revealing experimentally the copper additives and bromide surfactant counterion at the surface of a gold nanocuboid and quantifying their interatomic distances, our direct, low-dose imaging method provides atomic-level understanding of chemically sophisticated nanomaterial surface structures. These measurements of the atomic structure of the hard-soft interface provide the information necessary to understand and quantify surface chemistries and energies and their pivotal role in nanocrystal growth.

Li, Weilun [Monash University, Melbourne, VIC (Aus↗
DOE OSTI2020

Ambient Ion Trapping and Separations for High Throughput Structurally Selective Material Deposition

While ion mobility coupled to mass spectrometry (IMS/MS) has been increasingly adapted to biological analysis, the structural and molecular specificity offered by IMS/MS has untapped potential for creating novel materials (for energy, catalysis, biomolecular switches etc.) with rationally tailored properties by precisely controlling the chemical structure and composition of these materials. While electrochemical and catalytic properties of the bulk material are understood by mass-selective ion-soft-landing, different structures of one molecule can exhibit distinct properties from the bulk. Many biological phenomenon occur at interfaces and are highly structurally specific. IMS/MS offers means to separate molecules in a sample (which is first ionized and released to gas phase from the condensed phase) based on mass and structure. Species thus separated can potentially be deposited onto surfaces with molecular and structural specificity, to perform fundamental investigations for understanding critical interfacial phenomenon. Key performance metrics for IMS/MS analysis are resolution of separations and sensitivity. Recently developed Structures for Lossless Ion Manipulations (SLIM)4 enabled unprecedented resolution in IMS separations. In addition, high sensitivity was enabled in SLIM due to lossless confinement of ions using radio frequency fields. Thus, SLIM enabled extremely long path length separations (up to 0.1 km thus far) providing efficient separation of molecular ions never before achieved (e.g. isotopologues, D&L amino acids). While SLIM has unprecedented analytical separations power/utility, the use of SLIM platform for depositing mobility and mass selected molecular ions has two specific technological challenges: (a) Pulsed nature of IMS separations and their low duty cycle and (b) the need for a low vacuum of ~4 torr for lossless ion confinement. These limitations lead to long deposition times due to loss of ions generated from the sample. Enabling ion confinement at atmospheric pressure will be path-breaking contribution to the fundamental understanding of ion manipulations and separations and will also enable novel science currently precluded due to the inability of the present technologies to confine ions under ambient conditions. Traditionally used radio frequency fields are ineffective in confining ions at high pressures due to ion/neutral collisions. To address these, we propose to (a) develop methods for confining and manipulating ions for lossless IMS separations at atmospheric pressure enabling high sensitivity and throughput and (b) use the high specificity of IMS/MS and high throughput from ambient ion confinement to perform mobility and mass selective ion deposition at atmospheric pressure. Our goal is to enable the study of the fundamental properties of energy/catalysis materials and biomolecules. This project paves the way for high-throughput, mass and structure selective material deposition for highly specific surface creation/functionalization (discussed in Section 2 of the report). Further, the developments reported continue to push the boundaries of this process to ambient conditions (discussed in Section 3 of the report). We conclude with a list of specific intellectual property and publications which have been the outcome of this funded project.

36 MATERIALS SCIENCE↗
NASA NTRS2001

A Broad-Band X-Ray Study of the Geminga Pulsar

We present a comprehensive study of the Geminga pulsar at energies 0.1-10 keV using data from the ASCA, ROSAT, and EUVE satellites. The bulk of the soft X-ray flux can be parameterized as a blackbody of T = (5.6 +/- 0.6) x 10(exp 5) K, occupying a fraction 0. 10 - 0.64 of the surface area of the neutron star at the parallax distance of 160 pc. The ASCA detection of Geminga resolves the nature of the harder X-ray component previously discovered by ROSAT in favor of nonthermal emission, rather than thermal emission from a heated polar cap. The hard X-ray spectrum can be fitted by a power-law of energy index 1.0 +/- 0.5. The hard X-ray light curve has a strong main peak and a weak secondary peak; its total pulsed fraction is = 55%. Three ROSAT PSPC observations show significant variability of Geminga's light curve. In particular, a peculiar energy dependence of the modulation in the soft X-ray component, dubbed the "Geminga effect" in the original PSPC data, is not present in later observations. In addition, fine structure in the soft X-ray light curve, interpreted as eclipses due to cyclotron resonance scattering by a plasma screen on the closed magnetic field lines, almost disappeared in the most recent observations. All of the variable properties of Geminga can probably be associated with the nonthermal process that supplies e(sup +, sup -) pairs to its inner magnetosphere.

Halpern, Jules P.↗
NASA NTRS1992

Structural mechanics of the solar-A Soft X-ray Telescope

The Soft X-ray Telescope (SXT) is one of four major instruments that constitute the payload of the NASA-Japanese mission YOHKOH (formerly known as Solar-A), scheduled to be launched in August, 1991. This paper describes the design of the SXT, the key system requirements, and the SXT optical and structural systems. Particular attention is given to the design considerations for stiffness and dimensional stability, temperature compensation, and moisture sensitivyty control. Consideration is also given to the X-ray mirror, the aspect telescope, the entrance filters, the mechanical structure design, the aft support plate and mount, the SXT finite element model, and other subsystems.

Jurcevich, B. K.↗
DOE OSTI2024

Soft scalars in effective field theory

We derive a soft theorem for a massless scalar in an effective field theory with generic field content using the geometry of field space. This result extends the geometric soft theorem for scalar effective field theories by allowing the massless scalar to couple to other scalars, fermions, and gauge bosons. The soft theorem keeps its geometric form, but where the field-space geometry now involves the full field content of the theory. As a bonus, we also present novel double soft theorems with fermions, which mimic the geometric structure of the double soft theorem for scalars.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Resonant Soft X-ray Scattering Reveals Hierarchical Structure in a Multicomponent Vapor-Deposited Glass

Multiphase vapor-deposited glasses are an important class of materials for organic electronics, particularly organic photovoltaics and thermoelectrics. These blends are frequently regarded as molecular alloys and there have been few studies of their structure at nanometer scales. Here, in this work, we show that a codeposited system of TPD (N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine) and DO37 (disperse orange 37), two small molecule glass-formers, separates into amorphous, compositionally distinct phases with a domain size and spacing ca. 10s of nanometers that depends on substrate temperature during deposition. Domains rich in one of the two components become larger and more pure at higher deposition temperatures. We use resonant soft X-ray scattering (RSoXS) complemented with atomic force microscopy (AFM) and photoinduced force microscopy to measure the phase separation, topography, and purity of the deposited films. A forward-simulation approach to RSoXS analysis, the National Institute of Standards and Technology RSoXS Simulation Suite (NIST RSoXS simulation suite), is used with models developed from AFM images to evaluate the energy dependence of scattering across multiple length scales and interpret the RSoXS with respect to structure within the films. We find that the RSoXS is sensitive to a length scale of phase separation buried within the film that is consistent with the surface composition profile, and correlates to the topography to an extent that depends on substrate temperature. We demonstrate that vacuum scattering, which is often ignored in RSoXS analysis, contributes significantly to the features and energy dependence of the RSoXS pattern, and then illustrate how to properly account for vacuum scattering to analyze films with significant roughness. We then use this analysis framework to understand structure development mechanisms that occur during vapor deposition of a TPD-DO37 codeposited glass with results that outline paths to tune morphology in multicomponent materials.

36 MATERIALS SCIENCE↗
NASA NTRS1981

On the relationship between soft X-rays and H-alpha-emitting structures during a solar flare

Based on data obtained during a solar flare on March 31, 1979, soft X-ray (SXR) and hard X-ray (HXR) bursts are analyzed and compared with other available data in order to identify structures in H-alpha that may correspond to the SXR-emitting site. Measurements taken with the X-ray telescope and the XUV spectroheliograph flown on Skylab, have shown that the SXR emission from many flares comes from rather small structures of about 10-20 arcsec across. These structures appear to be loops that cross the magnetic neutral line. Understanding of the morphology of SXR was based on data of the solar flare of June 15, 1973, observed from Skylab, and the work of Moore et al., (1980). Dense, highly emissive coronal structures, not suggested to be the X-ray source, were forming, lost energy rapidly by emission and conduction, and finally formed the loops. It is concluded that bright H-alpha loops form rapidly as the SXR emission rises, and the overall decay (cooling rate) of SXR emission is much slower than the formation time of individual loops.

Zirin, H.↗
NASA NTRS1975

Observations of the structure and evolution of solar flares with a soft X-ray telescope

Soft X ray flare events were observed with the S-056 X-ray telescope that was part of the ATM complement of instruments aboard SKYLAB. Analyses of these data are reported. The observations are summarized and a detailed discussion of the X-ray flare structures is presented. The data indicated that soft X-ray emitted by a flare come primarily from an intense well-defined core surrounded by a region of fainter, more diffuse emission. An analysis of flare evolution indicates evidence for preliminary heating and energy release prior to the main phase of the flare. Core features are found to be remarkably stable and retain their shape throughout a flare. Most changes in the overall configuration seem to be result of the appearance, disappearance or change in brightness of individual features, rather than the restructuring or reorientation of these features. Brief comparisons with several theories are presented.

Vorpahl, J. A.↗
DOE OSTI2023

Field-theoretic analysis of hadronization using soft drop jet mass

One of the greatest challenges in quantum chromodynamics is understanding the hadronization mechanism, which is also crucial for carrying out precision physics with jet substructure. In this paper, we bring together recent advancements in our understanding of nonperturbative structure of the soft drop jet mass based on field theory, with precise perturbative calculations at next-to-next-to-leading logarithmic accuracy of its multidifferential variants. This allows for a model-independent analysis of power corrections associated with hadronization in a systematic manner. We test and calibrate hadronization models and their interplay with parton showers by comparing our universality predictions with various event generators for quark and gluon initiated jets in both lepton-lepton and hadron-hadron collisions. Our findings reveal that hadronization models perform better for quark jets relative to gluon jets. Our results provide a valuable toolbox for precision studies with the soft drop jet mass and pave the way for future analyses using real-world collider data. The stringent constraints derived in our framework are useful for improving the modeling of hadronization and its interplay with parton showers in next-generation event generators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗