SEARCH · Search NASA

Results for “CNT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS2013

Effect of Electron Beam Irradiation on the Tensile Properties of Carbon Nanotubes Sheets and Yarns

Carbon nanotube sheets and yarns were irradiated using electron beam (e-beam) energy to determine the effect of irradiation dose on the tensile properties. Results showed that a slight change in tensile strength occurred after irradiating as-received CNT sheets for 20 minutes, and a slight decrease in tensile strength as the irradiation time approached 90 minutes. On the other hand, the addition of small molecules to the CNT sheet surface had a greater effect on the tensile properties of e-beam irradiated CNT sheets. Some functionalized CNT sheets displayed up to a 57% increase in tensile strength following 90 minutes of e-beam exposure. In addition, as-received CNT yarns showed a significant increase in tensile strength as the irradiation time increased.

Williams, Tiffany S.↗

NASA NTRS2015

Fracture of Carbon Nanotube - Amorphous Carbon Composites: Molecular Modeling

Carbon nanotubes (CNTs) are promising candidates for use as reinforcements in next generation structural composite materials because of their extremely high specific stiffness and strength. They cannot, however, be viewed as simple replacements for carbon fibers because there are key differences between these materials in areas such as handling, processing, and matrix design. It is impossible to know for certain that CNT composites will represent a significant advance over carbon fiber composites before these various factors have been optimized, which is an extremely costly and time intensive process. This work attempts to place an upper bound on CNT composite mechanical properties by performing molecular dynamics simulations on idealized model systems with a reactive forcefield that permits modeling of both elastic deformations and fracture. Amorphous carbon (AC) was chosen for the matrix material in this work because of its structural simplicity and physical compatibility with the CNT fillers. It is also much stiffer and stronger than typical engineering polymer matrices. Three different arrangements of CNTs in the simulation cell have been investigated: a single-wall nanotube (SWNT) array, a multi-wall nanotube (MWNT) array, and a SWNT bundle system. The SWNT and MWNT array systems are clearly idealizations, but the SWNT bundle system is a step closer to real systems in which individual tubes aggregate into large assemblies. The effect of chemical crosslinking on composite properties is modeled by adding bonds between the CNTs and AC. The balance between weakening the CNTs and improving fiber-matrix load transfer is explored by systematically varying the extent of crosslinking. It is, of course, impossible to capture the full range of deformation and fracture processes that occur in real materials with even the largest atomistic molecular dynamics simulations. With this limitation in mind, the simulation results reported here provide a plausible upper limit on achievable CNT composite properties and yield some insight on the influence of processing conditions on the mechanical properties of CNT composites.

Jensen, Benjamin D.↗

NASA NTRS2016

Multifunctional Hybrid Carbon Nanotube/Carbon Fiber Polymer Composites

For aircraft primary structures, carbon fiber reinforced polymer (CFRP) composites possess many advantages over conventional aluminum alloys due to their light weight, higher strengthand stiffness-to-weight ratio, and low life-cycle maintenance costs. However, the relatively low electrical and thermal conductivities of CFRP composites fail to provide structural safety in certain operational conditions such as lightning strikes. Despite several attempts to solve these issues with the addition of carbon nanotubes (CNT) into polymer matrices, and/or by interleaving CNT sheets between conventional carbon fiber (CF) composite layers, there are still interfacial problems that exist between CNTs (or CF) and the resin. In this study, hybrid CNT/CF polymer composites were fabricated by interleaving layers of CNT sheets with Hexcel® IM7/8852 prepreg. Resin concentrations from 1 wt% to 50 wt% were used to infuse the CNT sheets prior to composite fabrication. The interlaminar properties of the resulting hybrid composites were characterized by mode I and II fracture toughness testing (double cantilever beam and end-notched flexure test). Fractographical analysis was performed to study the effect of resin concentration. In addition, multi-directional physical properties like thermal conductivity of the orthotropic hybrid polymer composite were evaluated. Interleaving CNT sheets significantly improved the in-plane (axial and perpendicular direction of CF alignment) thermal conductivity of the hybrid composite laminates by 50 - 400%.

Kang, Jin Ho↗

NASA NTRS2016

Nanotechnology

Present an overview of the Nanotechnology Project at NASA's Game Changing Technology Industry Day. Mature and demonstrate flight readiness of CNT reinforced composites for future NASA mission applicationsSounding rocket test in a multiexperiment payloadIntegrate into cold gas thruster system as propellant storageThe technology would provide the means for reduced COPV mass and improved damage tolerance and flight qualify CNT reinforced composites. PROBLEM/NEED BEING ADDRESSED:Reduce weight and enhance the performance and damage tolerance of aerospace structuresGAME-CHANGING SOLUTION:Improve mechanical properties of CNTs to eventually replace CFRP –lighter and strongerFirst flight-testing of a CNT reinforced composite structural component as part of an operational flight systemUNIQUENESS:CNT manufacturing methods developedFlight qualify CNT reinforced composites

Nanotechnology↗

NASA NTRS2019

Toward Ultralight High Strength Structural Materials via Collapsed Carbon Nanotube Bonding

The growing commercial availability of carbon nanotube (CNT) macro-assemblies such as sheet and yarn is making their use in structural composite components increasingly feasible. However, the mechanical properties of these materials continue to trail those of state-of-the-art carbon fiber composites due to relatively weak inter-tube load transfer. Forming covalent links between adjacent CNTs promises to mitigate this problem, but it has proven difficult in practice to introduce them chemically within densified and aligned CNT materials due to their low permeability. To avoid this limitation, this work explores the combination of pulsed electrical current, temperature, and pressure to introduce inter-CNT bonds. Reactive molecular dynamics simulations identify the most probable locations, configurations, and conditions for inter-nanotube bonds to form. This process is shown to introduce covalent linkages within the CNT material that manifest as improved macroscale mechanical properties. The magnitude of this effect increases with increasing levels of prealignment of the CNT material, promising a new synthesis pathway to ultralight structural materials with specific strengths and stiffnesses exceeding 1 and 100 GPa/(g/cu.cm), respectively.

Jensen, Benjamin D.↗

DOE OSTI2023

Enhancing the Electrode Gravimetric Capacity of Li 1.2 Mn 0.4 Ti 0.4 O 2 Cathode Using Interfacial Carbon Deposition and Carbon Nanotube-Mediated Electrical Percolation

Mn-based cation disordered rocksalt oxides (Mn-DRX) are emerging as promising cathode materials for next-generation Li-ion batteries due to their high specific capacities and cobalt and nickel free characteristic. However, to reach the theoretical capacity, solid-state method synthesized Mn-DRX materials require activation via post-synthetic ball milling, typically incorporating more than 20 wt.% conductive carbon that adversely reduces the electrode level gravimetric capacity. To solve this issue, we firstly deposit amorphous carbon on the surface of the Li 1.2 Mn 0.4 Ti 0.4 O 2 (LMTO) particles to increase the electrical conductivity by a five order of magnitude. Although the cathode material gravimetric first charge capacity reaches 180 mAh/g, its highly irreversible behavior leads to a 70 mAh/g first discharge capacity. Subsequently, to ensure a good electrical percolation network, the LMTO material is ball milled with multi-wall carbon nanotube (CNT) to obtain a 78.7 wt.% LMTO active material loading in the cathode electrode (LMTO-CNT). As a result, a 210 mAh/g cathode electrode gravimetric first charge and 165 mAh/g first discharge capacity are obtained, compared to the respective capacity values of 222 mAh/g and 155 mAh/g for the LMTO ball milled with 20 wt.% SuperP C65 electrode (LMTO-SP). After 50 cycles, the LMTO-CNT delivers a 121 mAh/g electrode gravimetric discharge capacity, largely outperforming the 44 mAh/g value of the LMTO-SP. In conclusion, our study demonstrates that while ball milling is necessary to achieve the theoretical capacity of LMTO, a careful selection of the additive, such as CNT, effectively reduces the required carbon quantity to achieve a higher electrode gravimetric discharge capacity.

25 ENERGY STORAGE↗

DOE OSTI2025

Multilayered Cu-Carbon Nanotube Composites for Advanced Conductors

Improving the efficiency of electrical components is critical in reducing energy consumption for various industrial and residential applications, ranging from rotating machinery to all electric devices and electric vehicle (EV) components to power grid systems. Substituting Cu wires with reduced resistance conductors that incorporate carbon nanotubes (CNTs) into Cu─ultraconductive Cu (UCC) composites─has recently been considered a promising strategy to improve energy efficiency, power density, and/or performance across various applications. Here, in this study, we created stable material formulations [CNT-containing polyvinylpyrrolidone (PVP) in dimethylformamide (DMF) solution] and utilized commercially viable fabrication approaches (electrospinning and magnetron sputtering) that produced high-performance multilayered tape-based UCC composite architectures. Increasing the CNT volume fraction by sequential layering of the structure with additional Cu-CNT layers showed a nearly stepwise improved performance in electrical and mechanical properties. This study also provides valuable insight into the effectiveness of nitrogen doping in modifying the conductivity of the CNT matrix. Fabricated prototypes demonstrated a >10% increase in current carrying capacity and >10% improvement in mechanical strength compared to those obtained on pure Cu. We believe that the properties demonstrated here, combined with the scalable manufacturing pathway of our approach, pave the way in designing future advanced conductors for diverse energy efficient and high-performance electrical systems and applications.

Carbon nanotubes↗

DOE OSTI2022

Activation of Transition Metal (Fe, Co and Ni)-Oxide Nanoclusters by Nitrogen Defects in Carbon Nanotube for Selective CO 2 Reduction Reaction

The electrochemical carbon dioxide reduction reaction (CO2RR), which can produce value-added chemical feedstocks, is a proton-coupled-electron process with sluggish kinetics. Thus, highly efficient, cheap catalysts are urgently required. Transition metal oxides such as CoO x , FeO x , and NiO x are low-cost, low toxicity, and abundant materials for a wide range of electrochemical reactions, but are almost inert for CO 2 RR. Here, we report for the first time that nitrogen doped carbon nanotubes (N-CNT) have a surprising activation effect on the activity and selectivity of transition metal-oxide (MO x where M = Fe, Ni, and Co) nanoclusters for CO 2 RR. MO x supported on N-CNT, MOx/N-CNT, achieves a CO yield of 2.6–2.8 mmol cm -2 min -1 at an overpotential of -0.55V, which is two orders of magnitude higher than MO x supported on acid treated CNTs (MOx/O-CNT) and four times higher than pristine N-CNT. The faraday efficiency for electrochemical CO 2 -to-CO conversion is as high as 90.3% at overpotential of 0.44V. Both in-situ XAS measurements and DFT calculations disclose that MO x nanoclusters can be hydrated in CO 2 saturated KHCO 3 , and the N defects of N-CNT effectively stabilize these metal hydroxyl species under carbon dioxide reduction reaction conditions, which can split the water molecules and provide local protons to inhibit the poisoning of active sites under carbon dioxide reduction reaction conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Monolayer Films of Binary Metal Oxide Nanoparticles for Carbon Nanotube Synthesis

Binary metal oxide nanoparticles (biMO-NPs) combining transition and main-group metals with well-organized atomic architectures have unique potential as robust and economical heterogeneous catalysts. Herein, metal oxide nanoparticles (CoAlxOy) using cobalt and aluminum were synthesized, and their structure, morphology, and chemical composition were investigated using various characterization techniques. The biMO-NPs, which had a Gaussian-type size distribution (∼6 nm), were assembled on plain silicon substrates modified chemically with linker molecules bearing suitable end groups. Surface analysis revealed an ordered, uniform, close-packed arrangement of biMO-NPs forming a monolayer architecture with nanoscale thickness (∼12 nm), high surface uniformity, and negligible defects. The nanoparticle monolayer film (NP-MF) was employed as a catalyst to grow carbon nanotube (CNT) forests via the thermal chemical vapor deposition (CVD) method, similar to those grown from catalyst thin films deposited by physical vapor deposition. Structural characterization confirmed the growth of a dense, uniform, high-quality vertically aligned carbon nanotube (VA-CNT) forest with a length of ∼125 µm, which is comparable to the VA-CNTs grown from expensive thin films. Thus, CNT growth was successfully catalyzed by the biMO-NPs, highlighting a simple and inexpensive alternative for catalyst deposition. In this innovative wet-chemistry approach, the catalyst and catalyst support are combined within a single nanoparticle before NP-MF assembly. Interestingly, this approach provides a scalable and cost-effective pathway for CNT growth, eliminating the need for expensive thin deposition techniques.

Regmi, Bishow [University of Cincinnati]↗

DOE OSTI2022

Evaluating the Lightning Strike Damage Tolerance for CFRP Composite Laminates Containing Conductive Nanofillers

Conductive nanofillers, such as carbon nanotube, graphene nanoplatelets, and carbon black particles (with diameters in nanometers) have been shown to enhance the electrical conductivity of fiber reinforced polymer matrix composites in many existing studies. The motivation is primarily for lightning strike protection, electromagnetic interference shielding, de-icing, and the manufacturing of lightweight electronic components. Here, we evaluate the lightning strike damage tolerance of carbon fiber reinforced polymer (CFRP) matrix composite laminates containing conductive nanofillers with varying weight fractions, including carbon black (CB), carbon nanotubes (CNT), and a mix of CB and CNT, through simulated lightning strike tests, followed by both non-destructive ultrasonic inspection and destructive sectioning to characterize the damage inflicted by the simulated lightning strike. Three-point flexural tests are performed to evaluate the residual strength retained by all CFRP specimens. Results show that lightning strike damage experienced varying levels of reduction for CFRP composite specimens containing conductive fillers in comparison to the baseline specimen without fillers. Notably, the delamination only penetrated to the interface between the 1st and 2nd layer for the specimen with 0.25 wt.% CNT in comparison to the baseline CFRP specimen for which the delamination penetrated to the interface between the 5th and 6th layer. Moreover, the retention of the flexural modulus increased from 26.5% to a maximum of 95.0% for the specimen with 0.25 wt.% hybrid CB and CNT. Yet, we show that using our chosen conductive fillers cannot fully eliminate lightning strike damage. Additionally, adding conductive fillers could compromise the flexural properties. We provide discussions on future recommendations on using conductive fillers for the lightning strike protection of CFRP composites.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Ultra-selective membrane composed of charge-stabilized fixed carrier and amino acid-based ionic liquid mobile carrier for highly efficient carbon capture

Membrane technology has been extensively studied for CO 2 capture applications, especially for flue gas sources. In the past decades, facilitated transport membranes (FTMs) have made breakthroughs overcoming the permeance-selectivity trade-off upper bound restricting traditional CO 2 separation membranes, but are still facing challenges towards practical applications, including limited performance, such as insufficient CO 2 /N 2 selectivity to achieve 95 % CO 2 dry-base purity by one step separation, and long-term stability. Herein, we designed and fabricated a novel FTM structure containing an ionic liquid (1-ethyl-3-methylimidazolium aminoacetate, [Emim][Gly]) as mobile CO 2 -carrier and a polymeric amine (polyethyleneimine, PEI) as fixed CO 2 -carrier. In this study, the fixed carrier is confined within a carbon nanotube (CNT) framework of 230 nm thickness via electrostatic forces adjusted by a polyelectrolyte (polystyrene sulfonate, PSS), while the mobile carrier diffuses freely within the CNT framework. After optimization of the membrane recipe and spray-coating fabrication procedure, following our previous work, the resulting CNT-PSS-PEI ~ IL membranes demonstrated an ultra-high CO 2 /N 2 selectivity up to 1,000 with CO 2 permeance up to 2,400 GPU (Gas Permeation Unit, 1 GPU = 3.348 × 10 -10 mol·s -1 ·m -2 ·Pa -1 ) under vacuum operation condition. Furthermore, one 100-cm 2 flat sheet membrane sample was prepared and exhibited one-stage CO 2 enrichment from 15 % to 95 % purity (dry-base) for the first time amongst all reported CO 2 separation membranes. The membrane retained a stable performance over 50-h operation period under vacuum condition. The extraordinary CO 2 separation performance illustrates the great potential of the CNT-PSS-PEI ~ IL membranes for flue gas carbon capture application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Favorable morphology and electronic conductivity of functional sublayers for highly efficient water splitting electrodes

Low electronic conductivities and improper morphologies of anode electrodes greatly limit the reaction area, catalyst utilization and efficiency in proton exchange membrane water electrolyzers. In this study, conductive sublayers with different conductivities and morphologies were introduced into anode electrodes in membrane-based water electrolyzers. In-situ and ex-situ investigation results showed that conductive sublayers (Au mesh and carbon nanotube (CNT) film) augmented the sheet conductivity of anode electrodes by up to 4000 times (from 2000 to 0.5 ohm square -1 ), and the ohmic resistance of water electrolyzers was reduced to 1/3 when inserting conductive sublayers. In addition, CNT film provided a higher electrochemical active area than Au mesh, because of favorable morphologies (large porosity and surface area) of CNT fibers on CNT films. Therefore, the current density of water splitting was increased by 3 times (from 4.55 mA cm -2 to 14.83 mA cm -2 ) at 2.5 V compared to a conventional anode electrode. Visualizations on bubble dynamics showed improved performances with conductive sublayers; this was mainly due to greatly increased number of reaction sites, highly spread reaction area (from 50 to 1000 um), and reduced activation overpotential. Therefore, a balance between high electronic conductivity and nanoporous morphology is essential to the anode electrode for larger reaction sites and areas in highly efficient water electrolyzers.

25 ENERGY STORAGE↗

DOE OSTI2023

Aligned carbon fibers-carbon nanotube-polymer-based composite as lithium-ion battery current collector

High energy density demand is pushing the development of high-voltage cathode materials, which necessitates improved electrochemical stability of other battery components such as binders, electrolytes, and current collectors. Current collectors are considered to be an inactive component but still play an essential role. In this study, a metal-free composite film containing directionally aligned carbon fiber (CF), carbon nanotube (CNT), and polymer (P) was developed to replace aluminum foil as a cathode current collector, which relies on forming an Al 2 O 3 layer to ensure electrochemical stability at high voltage. Here, each component in the new cathode current collector played a functional role. The CNTs provided uniform current densities, and CFs improved the electronic conductivity and mechanical strength of the composite material. The polymer enhanced the adhesion of the cathode coating with the current collector and provided an impervious support to the cathode materials. The CF-CNT-P composite demonstrated excellent electrochemical and thermal stability. Cathodes coated on the CF-CNT-P composite exhibited lower charge transfer resistance, improved rate capability, and improved cyclic stability compared with the cathodes deposited on conventional aluminum foil. Additionally, the composite current collector was lighter (1.81 mg/cm 2 and 15 µm thick) than the commonly used aluminum foil (4.35 mg/cm2 and 15 µm thick), which can increase the cell energy density. Additionally, the CF-CNT-P did not need to be separated from the cathode coating during recycling and can be burnt out with binder, simplifying the recycling process.

25 ENERGY STORAGE↗

DOE OSTI2025

Broadband Infrared Carbon Nanotube Linear Photodetector Arrays

Carbon nanotubes (CNTs) possess exceptional optoelectronic properties, including broadband absorption and high absorption coefficients, making them promising candidates for photodetector applications. However, conventional designs often rely on single or aligned nanotubes, which restrict device scalability and require complex fabrication techniques. Here, in this work, we address these limitations by utilizing CNT-suspended solutions to fabricate large-area photodetectors based on CNT networks via vacuum filtration and direct laser scribing. CNT networks are uniformly formed onto low-thermal-conductance polymeric filter papers that serve as substrates and mitigate the need for suspended structures, reducing the fabrication complexity and cost. The CNT films are patterned into single devices and 49-pixel linear arrays by using a laser-cutting process, enabling scalable and cost-effective production. The resulting devices operate as bolometers and exhibit broad spectral sensitivity extending from visible to midwave infrared, showing stable operation at room temperature. We further demonstrate proof-of-concept IR imaging using linear arrays.

IR imaging↗

DOE OSTI2020

Copper–Carbon Nanotube Composites Enabled by Electrospinning for Advanced Conductors

The power losses associated with the electrical resistance of copper (Cu) have generated considerable interest in the development of advanced conductors that incorporate carbon nanotubes (CNTs) into the Cu matrix—ultraconductive Cu (UCC) composites—to increase energy efficiency in various industrial and residential applications, ranging from electric power transmission and rotating machinery to electronic devices. To meet this demand, we describe an electrospinning-based polymer nanofiber templating strategy for the fabrication of UCC composites with electrical and mechanical performance exceeding that of Cu. Our approach involves electrospinning of polyvinylpyrrolidone (PVP)-based solutions containing CNTs into aligned PVP/CNT nanofibers onto Cu foil substrates, followed by vacuum-assisted thermal removal of organic solvent/polymer from the CNT matrix to achieve a uniformly distributed CNT layer on the Cu surface. Following additional Cu deposition, the Cu–CNT–Cu composites demonstrated similar electrical conductivity, higher current carrying capacity, and improved mechanical properties compared with those obtained from reference Cu. Importantly, after the heat treatment, Raman analysis of the CNT network displayed an increased metallic character that supports the enhanced electrical properties of the UCC composites. Thus, we believe that these performance characteristics together with the commercial viability of the present approach could open new possibilities in designing advanced conductors for a broad range of electrical systems and industrial applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Copper–Carbon Nanotube Composites Enabled by Brush Coating for Advanced Conductors

There is a growing demand for advanced conductors with enhanced electrical properties to increase the energy efficiency in various applications. A promising strategy to achieve this involves the use of ultraconductive copper (UCC) composites that incorporate highly conductive carbon materials, such as carbon nanotubes (CNTs), into the copper matrix. In this study, we present a scalable brush coating technique to incorporate CNTs onto Cu substrates to produce Cu–CNT–Cu composites. The process involves brush coating the CNT solution on Cu tape substrates, followed by vacuum-assisted thermal removal of organic moieties (e.g., surfactant/polymer). This step ensures the creation of a uniformly distributed CNT network within the Cu matrix. By addition of a thin film Cu overlayer, the fabricated Cu–CNT–Cu composite architecture demonstrates similar electrical conductivity, increased current carrying capacity, and enhanced mechanical properties compared to pure Cu reference tapes. Finally, the performance characteristics of these UCC tapes along with the scalability of the brush coating approach hold great promise for the fabrication of advanced conductors for wide-ranging energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Hard–Soft Acid–Base Theory Explains Photoexcited Carrier Dynamics in Porphyrin/CNT Nanohybrids: Time-Domain Atomistic Analysis

We employ the fundamental chemical concepts of hard− soft acid−base to formulate general principles governing excited-state dynamics in zinc porphyrin (ZnP)/carbon nanotube (CNT) hybrids for energy photoconversion. Atomistic quantum dynamics simulations demonstrate that electron-withdrawing and donating substituents at the ZnP β-pyrrolic position strongly influence the dynamics. ZnP photoexcitation produces subpicosecond electron transfer (ET) from ZnP to CNT, in agreement with the experiment. Substitutions of CN by H and tBu accelerate the ET. The trend is directly related to the hard−soft acid−base concept because the soft−soft interaction between the t Bu- ZnP acid and the mild CNT base enhances the donor−acceptor coupling. Longer coherence and more active vibrational modes facilitate the ET in t Bu-ZnP/CNT. Electron−hole recombination in CN-ZnP/CNT occurs on a hundred picosecond time scale, nicely corroborated by the experiment. The exciton lifetime is extended beyond a nanosecond by the substitutions. The soft−soft interaction in t Bu-ZnP/ CNT increases the splitting between the highest occupied orbitals of the two subsystems, reduces their mixing, and decreases nonadiabatic coupling between the ground and excited states. Rapid decoherence and involvement of low-frequency vibrations favor longer lifetimes. Our investigation reveals that larger p K a of the β-pyrrolic acid gives rapid ET and slow recombination and provides detailed mechanistic information, essential for future optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Decoupling copolymer, lipid and carbon nanotube interactions in hybrid, biomimetic vesicles

Bilayer vesicles that mimic a real biological cell can be tailored to carry out a specific function by manipulating the molecular composition of the amphiphiles. These bio-inspired and bio-mimetic structures are increasingly being employed for a number of applications from drug delivery to water purification and beyond. Complex hybrid bilayers are the key building blocks for fully synthetic vesicles that can mimic biological cell membranes, which often contain a wide variety of molecular species. While the assembly and morpholgy of pure phospholid bilayer vesicles is well understood, the functionality and structure dramaticlly changes when copolymer and/or carbon nanotube porins (CNTP) are added. The aim of this study is to understand how the collective molecular interactions within hybrid vesicles affect their nanoscale structure and properties. In situ small and wide angle X-ray scattering (SAXS/WAXS) and molecular dynamics simulations (MD) are used to investigate the morphological effect of molecular interactions between polybutadiene polyethylene oxide, lipids and carbon nanotubes (CNT) within the hybrid vesicle bilayer. Within the lipid/copolymer system, the hybrid bilayer morphology transitions from phase separated lipid and compressed copolymer at low copolymer loadings to a mixed bilayer where opposing lipids are mostly separated from the inner region. This transition begins between 60 wt% and 70 wt%, with full homogenization observed by 80 wt% copolymer. The incorporation of CNT into the hybrid vesicles increases the bilayer thickness and enhances the bilayer symmetry. Analysis of the WAXS and MD indicate that the CNT–dioleoyl interactions are much stronger than the CNT–polybutadiene.

59 BASIC BIOLOGICAL SCIENCES↗