SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Integrated multiple-quantum-well/Fabry-Perot structure provides high-contrast variation of reflection of reading beam, under control of writing beam. Periodic potential barriers separate photogenerated electrons from holes, leading to long recombination lifetimes and large concentrations of free charge carriers. Concentrations quench excitons or fill energy bands in quantum wells, altering absorption of reading beam.
The Ion Beam Experiment at the Center for Astrophysics is dedicated to the study of ion-electron collision processes of importance in solar physics. The analysis of measurements of Electron Impact Excitation (EIE) from the 3s3p(exp 3)P(exp o) metastable state to the 3s3p(exp 1)P state of Si(2+) was completed during the past year and a paper describing the results is available as a preprint. Our current program is directed at measuring absolute cross sections for dielectronic recombination (DR) and EIE in Si(3+), one of the primary ions used for probing the solar transition region. Our study of DR is particularly concerned with the effects of electric and magnetic fields on the recombination rates. Measurements of silicon ions with charge greater than n=2 have necessitated upgrading the experiment with a new ion source. The new source is also suitable for producing C(2+) beams to be used for measurements of EIE and DR for that system. The source is expected to be capable of producing beams of more highly charged systems as well.
In order to calibrate a time-of-flight mass spectrometer which is to be flown in the solar wind, the charge exchange properties of low-energy ions in thin carbon foils have been investigated. Incident ions of He, C, N, O, Ne, and Ar with energies in the range 0.5-2 keV/nucleon have been used to measure charge-state distribution, residual energy, and angular distribution after transmission through thin (1-6 microgram/sq cm) carbon foils. Within such foils, an equilibrium between ionization and recombination of the projectile is rapidly established, and, consequently, the charge state of the emerging particle depends essentially on its residual velocity. A comparison of the charge exchange properties of Ne-22 with Ne-20 demonstrates that indeed the velocity (and not the energy) of the emerging particle determines its final charge. A comparison of properties of different elements provides an indication of an electron shell effect. Predictions for the energy loss of ions within the carbon foils made with the TRIM code are in good agreement with the experimental results presented in this paper.
Charge collected by diffusion from ion tracks in a semiconductor substrate may be influenced by the substrate diffusion length, which is related to recombination losses. A theoretical analysis shows that, excluding some extreme cases, charge collection is insensitive to spatial variations in the diffusion length funciton, so it is possible to define an effective diffusion length having the property that collected charge can be approximated by assuming a uniform diffusion length equal to this effective value.
A lithium-chlorine rechargeable battery is considered along with an FeS electrode development for a secondary Li5Si-FeS battery, the sodium-sulfur battery, nickel battery systems for electric vehicles, reactions in lithium thionyl chloride cells, progress in the development of lithium inorganic batteries, a stable electrolyte for Li/SO2 reserve cells, and rechargeable lithium transition metal sulfide batteries. Attention is also given to thermal runaway tests on nickel-cadmium aircraft batteries, the development of nickel-zinc batteries for aircraft, an evaluation of sealed lead acid batteries for aircraft applications, the charging of sealed lead-acid batteries, hydrogen recombination in sealed nickel-cadmium cells, the characteristics of nickel-hydrogen flight cells, the lithium-iodine cell, low power methanol fuel cells, and a nuclear battery hybrid configuration study.
The effects of controlled concentrations of secondary impurities (Al, C, Ca, Cr, Cu, Fe, Mg, Mn, Mo, Ta, Ti, V, Zn, and Zr), incorporated alone or in combinations into Czochralski and float zone crystals, on the performance of silicon solar cells were investigated. Impurity concentrations ranged from 10 to the 11th to 10 to the 17th/cu cm. Solar cells were fabricated by a conventional diffusion process and characterized by computer reduction of current-voltage data. The data suggest that performance loss primarily results from reduction of the base diffusion length. On the basis of this assumption, a first order analytic model which predicts cell performance as a function of impurity concentrations is developed. Calculated performance parameters are in good agreement with observation, except for some impurities, such as Fe, Cu and Ni, which degrade cells via recombination and defects in the junction space-charge region. N-base devices are less affected by impurities, although degradation mechanisms appear to be the same as in p-devices. There seems to be very limited interaction between impurities in multiply-doped cells.
Charge exchange (CX) is a semi-resonant recombination process that can lead to spectral line emission in the X-ray band. It occurs in nearly any environment where hot plasma and cold gas interact: in the solar system, in comets and planetary atmospheres, and likely astrophysically, in, for example, supernova remnants and galaxy clusters. It also contributes to the soft X-ray background. Accurate spectral modeling of CX is thus critical to properly interpreting our astrophysical observations, but the commonly used CX models in popular spectral fitting packages often rely on scaling equations and may not accurately describe observations or laboratory measurements. This paper introduces a method that can be applied to high-resolution CX spectra to directly extract state-selective CX cross-sections for electron capture, a key parameter for properly simulating the resulting CX spectrum.
In the past year we have developed a model for the dissociation of icy grains in comets. In general, this model does not predict the radical yield that is observed in the jets of comets. To reproduce these yields, the concentration of the radical's precursors will have to be too high to be consistent with the abundance that we expect in comets. We have also constructed a theoretical model for the formation of ions on icy cometary grains. That model shows that only a small number of the cometary ions could be produced as ions in icy grains if the particle has only positively charged ions. If it contains both positive and negative ions then it could have a higher concentration of ions without violating charge neutrality. When such a particle evaporates, it can release ions with both charges into the gas phase. These ions could produce radicals via dissociative recombination with electrons if they are positive ions or by photoattachment of electrons if they are negative electrons. Finally, an avalanche process involving the acceleration of electrons towards charged particles is evaluated. It is shown that this will not lead directly to gas phase ions, but it might lead to additional ionization and dissociation on the grain.
The ion electron plasma in comets is examined for cooling processes which result from its interactions with the neutral coma. A cometary coma model is formulated that is composed predominantly of H2O and its decomposition products where electrons are cooled in a variety of processes at rates varying with energy. It is shown that solar plasma plus accumulated cometary ions and electrons is affected very strongly as it flows into the coma. The electrons are rapidly cooled and all but some 10% of the ions undergo charge exchange. Photodissociation of H2O is assumed where ion electron recombination is the dominant loss process.
There is increasing emphasis during this decade on understanding energy balance and phenomena observed in high electron temperature plasmas. The UV spectral return from FUSE, the X-ray spectral return from the HETG on Chandra and the LETGS 011 XMM-Newton are just beginning. Line emissions are almost entirely from highly-charged ions (HCIs) of C, N, 0, Ne, Mg, S, Si, Ca, and Fe. The Constellation-X mission will provide X-ray spectroscopy up to photon energies of 0.12 nm (10 keV) where primary line emitters will be HCIs. A variety of atomic parameters are required to model the stellar and solar plasma. These include cross sections for excitation, ionization, charge-exchange, X-ray emission, direct and indirect recombination, lifetimes and branching ratios, and dependences on l, m mixing by external E and B fields. In almost all cases the atomic quantities are calculated, and few comparisons to experiment have been carried out. Collision strengths and Einstein A-values are required to convert the observed spectral intensities to electron temperatures and densities in the stellar plasma. The JPL electron energy-loss and merged beam approach has been used to measure absolute collision strengths in a number of ions, with critical comparison made to the best available theories.
Silver-cadmium battery - cell tests, separator property changes, gas recombination, negative formation on gas evolution, trickle and constant potential charging, and argentous operation
A first-order model of He(3)-Ar 1.79-micron laser is developed, compared to experimental results, and used to explain the qualitative features of this system. Results indicate that direct excitation of the argon upper level is at best very inefficient for population inversion. For argon concentrations which give the most efficient laser operation, the He-3(n,p)He-3(n,p)He-3 energy is used to produce atomic He ions that quickly convert into He molecular ions. These molecular ions subsequently form argon atomic ions through charge transfer. The dominant pumping mechanism is collisional-radiative recombination of the argon atomic ion and subsequent radiative cascading into the upper laser level.
The effects of different surface treatments of the p-type Hg(x-1)Cd(x)Te (x about 0.2) alloy, including anodic-sulfide, anodic-oxide, and ZnS coatings, on the surface charge density and surface mobility were investigated. Measurements of surface recombination velocities in samples passivated by either a ZnS coating on a freshly etched surface or by anodic native sulfide combined with deposited ZnS showed essentially the same temperature dependence down to 50 K. For the same original material, both the surface state density and the activation energy were found to be similar. It is suggested that, for both passivations, the surface is controlled by traps that can be related to lattice defects, such as vacancies.
A new concept for an erasable optical memory is demonstrated using stimulated electronic transition (SET). Large bandgap semiconductors are suitable materials for the SET medium. The properties of MgS:Eu,Sm and SrS:Eu,Sm as possible media for the SET process are investigated. Quantum storage is achieved in the form of charges in deep levels in the medium and stimulated radiative recombination is used as the reading process. Unlike magneto-optic (M-O) and phase change (PC) processes, optical writing, reading and erasing are achieved without localized heating. The SET process will have an inherently faster data transfer rate and a higher storage density, and the medium will be more durable than the M-O and PC media. A possible application of the SET process in neural networks is also discussed.
N2(+) ion measurements are examined which were made with the Atmospheric Explorer-C satellite during a phase of solar activity in 1978 that was significantly higher than near the earlier minimum. It is found that the major source of N2(+) is photoionization, rather than charge exchange with O(+) (2D), and that the major loss process above 300 km is dissociative recombination with electrons. A data sample for which the electron temperature (T sub e) covered the range from 1000 to 3400 K is used to evaluate the rate constant, alpha, for the dissociative-recombination process. The results show good agreement with laboratory measurements given by the expression: alpha = 1.8 x 10 to the -7th (T sub e/300) to the -0.39th cu cm/sec.
Four positive ion composition measurements of the equatorial E region made at Thumba, India, are presented. During the day, the major ions between 90 and 125 km are NO(+) and O2(+). A metallic ion layer centered at 92 km is observed, and found to contain Mg(+), Fe(+), Ca(+), K(+), Al(+), and Na(+) ions. The layer is explained in terms of a similarly shaped latitude distribution of neutral atoms which are photoionized and charge-exchanged with NO(+) and O2(+). Three body reactions form molecular metallic ions which are rapidly lost by dissociative ion-electron recombination. Nighttime observations show downward drifting of the metallic ion layer caused by equatorial dynamo effects. These ions react and form neutral metals which exchange charges with NO(+) and O2(+) to produce an observed depletion of those ions within the metallic ion region.
A theoretical model for computing the displacement damage defect density and the short-circuit current (I sub sc) degradation in proton-irradiated (AlGa)As-GaAs p-n junction solar cells is presented. Assumptions were made with justification that the radiation induced displacement defects form an effective recombination center which controls the electron and hole lifetimes in the junction space charge region and in the n-GaAs active layer of the irradiated GaAs p-n junction cells. The degradation of I sub sc in the (AlGa)As layer was found to be negligible compared to the total degradation. In order to determine the I sub sc degradation, the displacement defect density, path length, range, reduced energy after penetrating a distance x, and the average number of displacements formed by one proton scattering event were first calculated. The I sub sc degradation was calculated by using the electron capture cross section in the p-diffused layer and the hole capture cross section in the n-base layer as well as the wavelength dependent absorption coefficients. Excellent agreement was found between the researchers calculated values and the measured I sub sc in the proton irradiated GaAs solar cells for proton energies of 100 KeV to 10 MeV and fluences from 10 to the 10th power p/square cm to 10 to the 12th power p/square cm.
We present high-resolution X-ray spectra of cloud-shock interaction regions in the eastern and northern rims of the Galactic supernova remnant Puppis A, using the Reflection Grating Spectrometer onboard the XMM-Newton satellite. A number of emission lines including K(alpha) triplets of He-like N, O , and Ne are clearly resolved for the first time. Intensity ratios of forbidden to resonance lines in the triplets are found to be higher than predictions by thermal emission models having plausible plasma parameters. The anomalous line ratios cannot be reproduced by effects of resonance scattering, recombination, or inner-shell ionization processes, but could be explained by charge-exchange emission that should arise at interfaces between the cold/warm clouds and the hot plasma. Our observations thus provide observational support for charge-exchange X-ray emission in supernova remnants.