Search NASA⌕ Search

SEARCH · Search NASA

Results for “Delta doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

107 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Re-entrant unconventional superconductivity induced by rare-earth substitution in Nd 1-x Eu x NiO 2 thin films

High temperature superconductivity is typically associated with strong coupling and a large superconducting gap, yet these characteristics have not been demonstrated in the nickelates. Here, we provide experimental evidence that Eu substitution in the spacer layer of Nd 1-x Eu x NiO 2 (NENO) thin films enhances the superconducting gap, driving the system toward a strong-coupling regime. This is accompanied by a magnetic-exchange-driven magnetic-field-enhanced superconductivity. We investigate the upper critical magnetic field, H c2 , and the superconducting gap of superconducting NENO thin films with x = 0.2 to 0.35. Magnetoresistance measurements reveal magnetic-field-enhanced superconductivity in NENO films. We interpret this phenomenon as a result of an interaction between magnetic Eu ions and superconducting states in the Ni d x2-y2 orbital. The upper critical magnetic field strongly violates the weak-coupling Pauli limit. Infrared spectroscopy confirms a large gap-to-Tc ratio $2\Delta /{k}_{B}{T}_{{\rm{c}}}\simeq 5-6$, indicating a stronger coupling pairing mechanism in NENO relative to the Sr-doped NdNiO 2 . The substitution of Eu in the rare-earth layer causes pronounced modifications of the superconducting gap and magnetic interactions in Nd-based nickelates, opening new pathways to engineer high- T c superconductivity in infinite-layer nickelates.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Observation of van der Waals phonons in the single-layer cuprate ( Bi , Pb ) 2 ( Sr , La ) 2 CuO 6 + δ

Interlayer van der Waals (vdW) coupling is generic in two-dimensional materials such as graphene and transition-metal dichalcogenides, which can induce very low-energy phonon modes. Using high-resolution inelastic hard x-ray scattering, we uncover the ultralow energy phonon mode along the Cu-O bond direction in the high- T c cuprate (Bi,Pb) 2 (Sr,La) 2 ⁢CuO 6+$\delta$ (Bi2201). The energy and full-width half-maximum (FWHM) of these modes are independent of temperature, while their intensity decreases with doping in accordance with an increasing c -axis lattice parameter. Here, we compare the experimental results to first-principles density functional theory simulations and identify the observed mode as a van der Waals phonon, which arises from the shear motion of the adjacent Bi-O layers. This shows that Bi-based cuprate has vibrational properties similar to graphene and transition-metal dichalcogenides, which can be exploited to engineer novel heterostructures.

36 MATERIALS SCIENCE↗
NASA NTRS2002

Multi-Band GaAs/AlGaAs Quantum Well Infrared Photodetector (QWIP) Focal Plane Arrays

The GaAs/AlGaAs based Quantum Well Infrared Photodetectors (QWIPs) afford greater flexibility than the usual extrinsically doped semiconductor IR detectors because the wavelength of the peak response and cutoff can be continuously tailored over any wavelength between 6-20 micrometers. The spectral band width of these detectors can be tuned from narrow (DELTA)lamba/lamba approx. 10 %)) to wide (DELTA)lamba/lamba approx. 50 %) allowing various applications. Also, QWIP offers multi-color infrared cameras which is capable of simultaneously acquiring images in different infrared bands. Each pixel of such array consists of vertically stacked, independently readable, QWIP detectors sensitive in different narrow infrared bands. In this article, we discuss the development and results of the 640 x 512 dual-band and four-band QWIP FPAs.

Bandara, S. V.↗
NASA NTRS2005

Wide Operational Range Thermal Sensor

Bolometer system and method for detecting, at BLIP levels, presence of radiation over a broad range of wavelengths in an infrared spectrum and in a temperature range from 20 K to as high as room temperature. The radiation is received by a Si crystal having a region that is doped with one or more of In, Ga, S, Se, Te, B, Al, P, As and Sb in a concentration ratio in a range such as 5 x 10(exp -11) to 5 x 10(exp -6). Change in electrical resistance delta R due to receipt of the radiation is measured through a change in voltage difference or current within the crystal, and the quantity delta R is converted to an estimate of the amount of radiation received. Optionally, incident radiation having an energy high enough to promote photoconductivity is removed before detection.

John H Goebel↗
NASA NTRS1983

The transient oxidation of single crystal NiAl+Zr

The 800 C oxidation of oriented single crystals of Zr doped beta-NiAl was studied using transmission electron microscopy. The oxide phases and metal-oxide orientation relationships were determined to characterize the transient stages of oxidation prior to the transformation to or formation of alpha-Al2O3. On (001) and (012) metal orientations, NiAl2O4 was the first oxide to form followed by delta-Al2O3 which becomes the predominant oxide phase. All oxides were highly epitaxially related to the metal; the orientation relationships being function of parallel cation close-packed directions in the meta and oxide. On (011) and (111) metal orientations, gamma-Al2O3 became the predominant oxide phase rather than delta-Al2O3, indicating a structural stability from the highly epitaxial oxides. The relative concentration of aluminum in the oxide scales increased with time indicating preferential gamma-or delta-Al2O3 growth. The striking feature common to the orientation relationships is the alignment of 100 m and 110 ox directions, believed to result from the minimal 3 percent mismatch between the corresponding (100)m and (110)ox planes.

Doychak, J. K.↗
NASA NTRS1991

X-ray photoelectron spectroscopy study of chemically-etched Nd-Ce-Cu-O surfaces

Acetic acid, Br2, and HCl solutions are investigated for removing insulating species from Nd(1.85)Ce(0.15)CuO(4-delta) (NCCO) thin film surfaces. X-ray photoelectron spectroscopy (XPS) shows that the HCl etch is most effective, yielding O 1s spectra comparable to those obtained from samples cleaned in vacuum and a clear Fermi edge in the valence band region. Reduction and oxidation reversibly induces and eliminates, respectively, Fermi level states for undoped samples, but has no clearly observable effect on the XPS spectra for doped samples. Reactivity to air is much less for NCCO compared to hole superconductors, which is attributed to the lack of reactive alkaline earth elements in NCCO.

Vasquez, R. P.↗
NASA NTRS1980

Proton radiation damage in bulk n-GaAs

Bulk samples of Te-doped n-type GaAs were irradiated using 10 MeV to 24 MeV protons to fluences between 2 x 10 to the 11th power protons/sq cm and 2 x 10 to the 14th power protons/sq cm. Majority carrier electrical effects were measured using the vanderPauw techniques and it was observed that radiation damage was minimal at the 10 to the 11th power proton/sq cm fluence. For the higher fluences, carrier removal was proportional to Delta E/Delta x for the protons indicating ionization interactions between the protons and atoms. Thermal annealing was observed at 155 C.

Liu, D. C.↗
NASA NTRS1991

High-T sub c fluorine-doped YBa2Cu3O(y) films on ceramic substrates by screen printing

Thick films of fluorine-doped YBa2Cu3O(y) were screen printed on highly polished alumina, magnesia spinel, strontium titanate, and yttria-stabilized zirconia (YSZ) substrates. They were annealed at 1000 C and soaked in oxygen at 450 C, followed by slow cooling to room temperature. The films were characterized by electrical resistivity measurements as a function of temperature and x-ray diffraction. The film on YSZ showed the best characteristics with a T sub c (onset) of 91 K, T sub c (R equals 0) of 88.2 K, and a transition width, delta T sub c (10-90 percent), of approximately 1.7 K. The film adhesion, probably controlled by interdiffusion of cations between the film and the substrate, was good in all cases except on strontium titanate where the film completely detached from the substrate.

Bansal, Narottam P.↗
NASA NTRS1999

Thin Film Ba(x) Sr(1-x)TiO3 Coupled Microstrip Ku- and K-band Phase Shifters

In this report authors found that the: (1) Best room temperature CMPS performance seen on 1% Mn-doped Ba(0.6)Sr(0.4)TiO3 annealed films on MgO: K = 74 C/dB. Phase Shift/coupled length: 1427 C/cm (2) Attempt to improve phase shifters through thicker as-deposited films stymied by declining film quality with film thickness. Annealing may alleviate this problem. (3) CMPS phase shift at Ku-band didn't experience the great rise in tunability seen in 1 MHz epsilon(sub r)(0) data. (4) While CMPS circuits may be well suited for arrays, simpler circuits like CPW would be more useful for characterizing epsilon(sub r) and tan(delta) at Ku-and K-band. (5) New substrates and designs are being tested.

VanKeuls, F. W.↗
NASA NTRS1993

Activation energy and capture cross section of majority carrier traps in Zn doped InP

Schottky barrier diodes were fabricated on Zn doped InP Wafers. The diodes were radiation damaged with 2 MeV protons to a dose of 2 x 10(exp 12)cm(sup -2). The damage was analyzed by DLTS (deep level transient spectroscopy) using the double correlation technique. Capture cross sections were measured directly. Two major defects were observed in the DLTS spectra. The first defect, was H4 at Ev + 0.29 eV, with capture cross section 1.1 x 10(exp -17)cm(sup 2). The second defect, was H5 at Ev + 0.53 eV. Its capture cross section varied with temperature as described by the relationship sigma = sigma(sub 0) exp(delta(E)/kT) where sigma(sub 0) = 1.3 x 10(exp -19)cm(sup 2) and delta(E) = .08 eV. This relationship yields a sigma of 5.9 x 10(exp -21)cm(sup 2) at room temperature. The surprisingly small capture cross section of H5 and its temperature dependence are discussed in terms of the multiphonon emission process for carrier capture at the defect. The advantages of the improved experimental techniques used are also discussed.

Rybicki, George↗
NASA NTRS1988

Solar generation and storage of O2 (a 1 delta g)

An investigation was performed of the technical steps required to design a solar powered oxygen-iodine laser. Singlet delta oxygen is formed upon transfer of energy from selected photoexcited dye molecules to ground state molecular oxygen and then is concentrated and stored as an endoperoxide by reaction with an aromatic hydrocarbon. The endoperoxide, when heated, releases singlet oxygen in high yield thus providing a regenerable source of laser fuel. Energy transfer from dye molecules to molecular oxygen was investigated. When dye molecules were adsorbed to polymer substrates it was observed that the dye became embedded in the polymer matrix. Porphin dyes were incorporated into films of 1,4-dimethyl-2-poly(vinylnaphthalene), 2PVN. An endoperoxide was formed when porphin-doped 2PVN was exposed to visible radiation. This demonstrates the possibility of generating singlet oxygen using solar energy and concentrating and storing it in one simple step. Transport of energy by exciton migration in polycrystalline dye films was also investigated.

Twarowski, Allen J.↗
NASA NTRS1995

Electronic structure and the van Hove singularity scenario in high-T(sub c)H(g)Ba2CuO(4+delta) superconductors

The electronic structure and the hole concentrations in the high Tc superconductor HgBa2CuO(4+delta) (delta = O, 1) has been investigated by employing a first principles full potential self-consistent LMTO method with the local density functional theory. The scalar relativistic effects have been considered. The hole concentrations of the Cu-d and O-p(x,y) orbitals are seen to be larger for the HgBaCuO5 system than those of the HgBaCuO4 solid. However, the van Hove singularity (vHs) induced Cu-d and O-p peak which is seen to lie comparatively away and above the Fermi level in the delta = 1 system shifts towards the Fermi level in the delta = 0 system. Thus, the superconducting behavior appears to originate from the occurrence of the vHs peak at the Fermi level. The Fermi surface nesting area in the delta = 0 compound is seen to be larger than in the delta = 1 compound. The calculation reveals that the increase in pressure on the crystal enhances the hole concentrations but without showing any optimum value, On the other hand, the vHs peak approaches to-wards the Fermi level with pressure and crosses the Fermi surface near V/Vo approximately equals 0.625 (V and Vo are the crystal volumes at high and normal pressures, respectively). Our calculated value of the bulk modulus equal to 0.626 Mbar predicts the occurrence of this crossover at about 24 GPa which is in complete agreement with the experimental value. At this pressure the compound has maximum nesting area and self-doped behavior.

Agrawal, Bal K.↗
NASA NTRS1988

Development program for 1.93-micron lasers

For the first time lasers operating at 1.93 microns were demonstrated. The lasers were fabricated by Vapor Phase Epitaxial (VPE) growth techniques currently used for the fabrication of high power lasers at 1.3 microns. The structure of these laser diodes consisted of compositionally graded, sulfur-doped InAsP, grown on an InP substrate; a constant-composition n+InAs(0.27)P(0.73) layer, which is the first cladding layer; an In(0.66)Ga(0.34)As layer, which is the active region, and a second InAs(0.27)P(0.73) layer. The devices were oxide-stripe DH lasers (gain-guided only). The best devices had 80 K lasing thresholds in the range of from 80 to 150 mA, and T sub o (below 220 K) in the range of 60 to 90 K. The highest observed temperature of oscillation was 15.5 C. The highest observed power output at 80 K was in the range of 3 to 5 mW. The calculated delta I/delta T was 4.4 A/K. As a part of the materials development, PIN homojunction detectors having the band edge near 1.93 were also fabricated. The best devices (100 micron diameter, mesa structure) exhibited room temperature dark currents in the range of from 20 to 50 nA and had QE at 1.93 microns in the range of 35 to 40 percent. In addition to the device results, the InGaAs-InAsP materials system was extensively investigated and low defect density layers can now be grown allowing for significant device performance improvement.

Longeway, P.↗
NASA NTRS1992

Glass precursor approach to high-temperature superconductors

The available studies on the synthesis of high T sub c superconductors (HTS) via the glass precursor approach were reviewed. Melts of the Bi-Sr-Ca-Cu-O system as well as those doped with oxides of some other elements (Pb, Al, V, Te, Nb, etc.) could be quenched into glasses which, on further heat treatments under appropriate conditions, crystallized into the superconducting phase(s). The nature of the HTS phase(s) formed depends on the annealing temperature, time, atmosphere, and the cooling rate and also on the glass composition. Long term annealing was needed to obtain a large fraction of the 110 K phase. The high T sub c phase did not crystallize out directly from the glass matrix, but was preceded by the precipitation of other phases. The 110 K HTS was produced at high temperatures by reaction between the phases formed at lower temperatures resulting in multiphase material. The presence of a glass former such as B2O3 was necessary for the Y-Ba-Cu-O melt to form a glass on fast cooling. A discontinuous YBa2Cu3O(7-delta) HTS phase crystallized out on heat treatment of this glass. Attempts to prepare Tl-Ba-Ca-Cu-O system in the glassy state were not successful.

Bansal, Narottam P.↗
DOE OSTI2026

First principles band structure of interacting phosphorus and boron/aluminum δ -doped layers in silicon

Silicon can be heavily doped with phosphorus in a single atomic layer (a δ layer), significantly altering the electronic structure of the conduction bands within the material. Recent progress has also made it possible to further dope silicon with acceptor-based δ layers using either boron or aluminum, making it feasible to create devices with interacting δ layers with opposite polarity. Using density functional theory, we calculate the electronic structure of a phosphorus-based δ layer interacting with a boron or aluminum δ layer, varying the distances between the δ layers. At separations 1 nm and smaller, the dopant potentials overlap and largely cancel each other out, leading to an electronic structure closely mimicking intrinsic silicon. At separations greater than 1 nm, the two δ layers behave independently of one another, with an equivalent electronic structure to a p–n diode with an intrinsic layer taking the place of the depletion region. One mechanism for charge transfer between δ layers at larger distances could be tunneling, where we see a tunneling probability exceeding what would be seen for a standard silicon 1.1 eV triangular barrier, indicating that the interaction between delta layers may enhance tunneling compared to a traditional junction.

delta layers↗
NASA NTRS1994

Annealing temperature and O2 partial pressure dependence of T(sub c) in HgBa2CuO(4+delta)

Samples of HgBa2CuO(4+delta) (Hg-1201) were annealed under various conditions. After carefully controlling annealing time, annealing temperature (T(sub a)) and O2 partial pressure (P(sub 0)), we were able to find the reversible annealing conditions for Hg-1201. Under 1 atm O2 at 260 C less than or equal to T(sub a) less than or equal to 400 C, the obtained T(sub c) is nearly the same (approximately 97 K). However, it decreases quickly with T(sub a) greater than 300 C in high vacuum (P(sub 0) approximately 10(exp -8) atm), and reaches zero at T(sub a) = 400 C. On the other hand, T(sub c) decreases with the decrease of T(sub a) in high-pressure O2 (approximately 500 atm) and reaches approximately 20 K at about 240 C. In the entire annealing region, the oxygen surplus varies significantly from 0.03 to 0.4, and a wide range of T(sub c) variation (0 goes to 97 K goes to 20 K) was obtained with anion doping alone.

Xiong, Q.↗
NASA NTRS2001

Measurement of Microscopic Growth Rates in Float-Zone Silicon Crystals

Time dependent convective flows during crystal growth of doped semiconductors lead to fluctuations of the composition, so called dopant striations. In general, it is difficult to decide which is the main mechanism for the generation of these striations, it might be either the fluctuation of the concentration field in the melt and the extent of the solute boundary layer ahead of the solid-liquid interface or a variation of the growth velocity. Direct access to the concentration field is rather complicated to achieve, especially considering the high process temperature and the chemical activity of liquid silicon. The contribution of growth rate fluctuations to the formation of compositional fluctuations can be determined by measuring microscopic growth rates. The classical method of current pulses requires electrical feed-throughs and good electrical contacts, both are critical issues for the growth of high purity silicon crystals. Using a radiation based heating system, the heating power can be modulated very fast and effectively. We added to the normal heater power a sinusoidal off-set in the frequency range of 1 to 10 Hz, generating a narrow spaced weak rippling in the grown crystals which are superposed to the dopant striations caused by natural and by thermocapillary convection. The pulling speed was varied between 1 and 4mm/min. The microscope images of etched crystals slices have been analyzed by peak-search algorithms (measuring the spacing between each artificially induced marker) and by FFT. Performing growth experiments under a time-dependent flow regime, fluctuations of the microscopic growth velocity of Delta(v)/v(sub average) up to 50% have been measured. Damping the time-dependent convection by the use of an axial, static magnetic field of 500mT, the microscopic growth rate became constant within the resolution limit of this method. The results will be discussed using analytical methods for the calculation of microscopic growth velocity and by comparing them with measurements of temperature fluctuations in the melt during growth experiments itself.

Dold, P.↗