Search NASA⌕ Search

SEARCH · Search NASA

Results for “FCC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Facile Synthesis of Rhodium‐Based Nanocrystals in a Metastable Phase and Evaluation of Their Thermal and Catalytic Properties

Abstract Controlling the polymorphism of metal nanocrystals is a promising strategy for enhancing properties and discovering new phenomena. However, previous studies on Rh nanocrystals have focused on their thermodynamically stable face‐centered‐cubic (fcc) phase. Herein, a facile synthesis of Rh‐based nanocrystals featuring the metastable hexagonal close‐packed (hcp) phase is reported by using Ru seeds in their native hcp phase to template the deposition of Rh atoms. The success of such phase‐controlled synthesis relies on the templating effect promoted by the small lattice mismatch between Ru and Rh and the slow dropwise titration of the precursor at an elevated temperature, ensuring the layer‐by‐layer growth mode and thus the formation of a conformal hcp‐Rh shell. Faster injection rate of Rh(III) precursor leads to the formation of a rough Rh shell in the conventional fcc phase due to accelerated reaction kinetics. Considering both thermodynamic and kinetic aspects of this system, the hcp‐Rh phase is favored when the low surface energy from smooth overlayers balances the high bulk energy of the metastable phase, achieved through tight control of reaction rates and deposition patterns. These Ru hcp @Rh hcp core–shell nanocrystals demonstrate thermal stability up to 400 °C, while exhibiting higher catalytic activity toward ethanol oxidation reaction compared to Ru hcp @Rh fcc counterparts.

Nguyen, Quynh N.↗
DOE OSTI2025

Friction surface layer deposition of triple-phase Al 10 Cr 12 Fe 35 Mn 23 Ni 20 high entropy alloy: Process optimization and microstructural evolution

A high-strength Co-free triple-phase Al 10 Cr 12 Fe 35 Mn 23 Ni 20 high-entropy alloy (HEA) was successfully fabricated using Friction Surface Layer Deposition (FSLD), a bulk manufacturing method. Multiple single-layer deposits were produced by varying forging force (F) and traverse speeds (T r ) to optimize the process parameters. The optimized conditions (F = 40 kN & T r = 200 mm/min) were then applied to manufacture a scaled-up multi-layer specimen. The initial microstructure of the HEA consisted of coarse grains of the soft FCC-phase, long columnar dendrites of the hard BCC-phase, and small precipitates of the harder B2-phase within the BCC-dendrites. During FSLD, the FCC-matrix underwent continuous dynamic recrystallization due to high-temperature severe plastic deformation, forming finer equiaxed grains. Simultaneously, the BCC-dendrites fractured into smaller fragments, some of which experienced partial growth and coarsening under applied stress, resulting in an hourglass morphology. In contrast, the small B2-precipitates within the BCC-fragments dissolved during the elevated temperatures of FSLD and reprecipitated as substantially finer precipitates during continuous cooling post-FSLD. Additionally, the orientation relationships between the FCC and BCC/B2 phases were completely destroyed by the severe thermoplastic deformation inherent to FSLD. The microstructural refinements led to a substantial improvement in hardness from 177 HV to 283 HV, driven by Hall-Petch strengthening. The increased number of interfaces, including coherent BCC-B2 interfaces, potentially enhances the sink strength and radiation tolerance of the HEA, making it a promising candidate for nuclear applications. In conclusion, this study also highlights FSLD as a versatile technique for achieving tunable properties in HEAs, with detailed schematics illustrating the complex mechanisms of phase transformations during processing.

Additive Manufacturing↗
DOE OSTI2024

Compositional effect on pressure-induced polymorphism in high-entropy alloys

Recently, pressure-induced polymorphic phase transitions were discovered in several fragmented high-entropy alloys (HEAs), offering a valuable opportunity to deepen our understanding of these materials. However, the chemical and physical factors that govern these transitions are still unclear. Here, in this work, we combined in situ high-pressure synchrotron X-ray diffraction, X-ray emission spectroscopy (XES), and high-resolution transmission electron microscopy (HRTEM) to systematically study the evolution of the atomic and electronic structures in the Cantor alloy and its face-centered-cubic ( fcc ) subset alloys (CoCrFeMnNi, CoCrFeNi, CoCrMnNi, CoFeMnNi, CoCrNi, CoFeNi, CoMnNi, CrFeNi, and FeMnNi). Surprisingly, diverse behavior was observed among these closely related alloys during compression and decompression, which includes irreversible, reversible fcc to hexagonal close-packed (hcp) phase transitions, or even no detectable phase transitions up to ∼40 GPa. HRTEM measurements confirmed that the fcc and hcp phases abided by the classic Shoji-Nishiyama orientation relationship during the transitions. XES data indicated that high-pressure suppresses the local magnetic moments in all the studied alloys, suggesting that magnetic states do not significantly influence the polymorphic transitions. By comparing the effects of the atomic size difference, entropy, valence electron concentration, and stacking fault energy across all the compositions studied, only the stacking fault energy shows a strong correlation with the phase transitions, indicating it plays a key role in inducing polymorphism in HEAs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Formation and coarsening of epitaxially-supported metal nanoclusters

This mini-review describes developments over the last ~30 years in characterizing the nucleation & growth of epitaxially-supported metal nanoclusters (NCs) or islands during vapor deposition, as well as their post-deposition coarsening. A beyond-mean-field treatment for homogeneous nucleation & growth corrects the deficiencies of traditional treatments in describing, e.g., the island size distribution, but also necessitates consideration of the spatial distribution of islands and their capture zones. We discuss advances in modeling capabilities, including those based upon on an ab-initio level treatment of periphery diffusion kinetics, for description of the non-equilibrium growth shapes of these NCs, focusing on 2D NCs. For post-deposition coarsening of arrays of NCs, there is generally a competition between Ostwald Ripening (OR) and Smoluchowski Ripening (SR). SR is also known as Particle Migration & Coalescence. For 2D NCs in homoepitaxial systems, conventional OR is observed on pristine fcc(111) surfaces, dramatically enhanced OR in the presence of even trace amounts of chalcogens for Cu(111) and Ag(111), and anomalous OR on anisotropic fcc(110) surfaces. The unexpected discovery of SR for fcc(100) homoepitaxial systems prompted extensive analysis of the underlying diffusivities of 2D NCs as a function of size, as well as of NC coalescence dynamics. A comprehensive understanding of these processes is now available. Self-assembly of 3D NCs during deposition, issues related to heterogeneous nucleation, directed assembly, NC growth structure selection, and coarsening are addressed. Finally, for SR of 3D epitaxial NCs, recent insights into the size-dependence of diffusivity are described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Phase transition kinetics of superionic H2O ice phases revealed by Megahertz X-ray free-electron laser-heating experiments

Abstract H 2 O transforms to two forms of superionic (SI) ice at high pressures and temperatures, which contain highly mobile protons within a solid oxygen sublattice. Yet the stability field of both phases remains debated. Here, we present the results of an ultrafast X-ray heating study utilizing MHz pulse trains produced by the European X-ray Free Electron Laser to create high temperature states of H 2 O, which were probed using X-ray diffraction during dynamic cooling. We confirm an isostructural transition during heating in the 26-69 GPa range, consistent with the formation of SI-bcc. In contrast to prior work, SI-fcc was observed exclusively above ~50 GPa, despite evidence of melting at lower pressures. The absence of SI-fcc in lower pressure runs is attributed to short heating timescales and the pressure-temperature path induced by the pump-probe heating scheme in which H 2 O was heated above its melting temperature before the observation of quenched crystalline states, based on the earlier theoretical prediction that SI-bcc nucleates more readily from the fluid than SI-fcc. Our results may have implications for the stability of SI phases in ice-rich planets, for example during dynamic freezing, where the preferential crystallization of SI-bcc may result in distinct physical properties across mantle ice layers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

First-principles theory for cerium predicts three distinct face-centered cubic phases

We show results from first-principles calculations for cerium at very high compressions. These reveal a most remarkable behavior in a material; depending on atomic volume, cerium adopts three distinct face-centered cubic (fcc) phases driven by different physical mechanisms. The two well-known a and phases are vigorously debated in the literature, but we focus on the a phase as a metal with delocalized character of the 4f electron. The ultimate high compression fcc phase, here named ω, is driven partly by electrostatics. Our density-functional theory (DFT) study excellently reproduces the experimentally known compression behavior of cerium up to a few Mbar but goes beyond those pressures with structural transitions to tetragonal, hexagonal, and cubic (fcc) phases occurring before 100 Mbar (10000 GPa or 10 TPa). The 4f-electron contribution to the chemical bonding is shown to rule phase transitions and compressibility. The change of 4f occupation nicely explains the pressure dependence of the structural axial ratio in the tetragonal phase. At very high pressure, structures known at low pressures return because of band broadening, electrostatic ion repulsion, and an increase in hybridization between states that under normal conditions can be considered core (atomic like) states and the valence-band states.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cross slip of extended dislocations in face-centered cubic metals through phase-field modeling

Cross slip is a dislocation mechanism that significantly impacts the mechanical behavior of engineering alloys. Here, in this work, we advance a 3D phase-field dislocation dynamics (PFDD) mesoscale technique to simulate cross slip across a broad range of face-centered cubic (FCC) metals. The formulation incorporates elastic anisotropy, an FCC numerical grid, and a high-fidelity representation of the entire γ -surface from density functional theory for eight FCC metals and no adjustable parameters or rules. The relaxed core structures under zero stress for all metals are predicted to extend in plane. The analytical model for stacking fault width agrees well with the PFDD result under the assumption of elastic isotropy but overestimates it under elastic anisotropy, when the degree of anisotropy is large. The dynamic simulations are designed to elucidate the material parameters that influence the propensity for cross slip. Whether cross slip occurs under a non-Schmid stress or to bypass a hard obstacle, the critical stress to cross slip scales strongly with the anisotropic energy coefficient for a screw dislocation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Lithium's low-temperature phase transitions: Insights into quantum lattice dynamics and superconductivity

The large lattice dynamics of lithium, driven by its low atomic mass, results in energetically similar structures and significant isotope effects under pressure, posing challenges to current theoretical models. Above 20 GPa and at low temperatures, lithium's electronic properties deviate from simple metallic behavior, with superconductivity emerging in a complex, pressure-dependent manner, alongside an unusual isotope effect. The structural phases of 7 Li reported under these conditions are inconsistent across studies, and the structures of 6 Li remain unexamined. These gaps limit our understanding of the effects of pressure on lithium's electronic properties and the role of quantum lattice effects on its structural behavior under pressure. Here, we integrate experimental and theoretical approaches to investigate the low-temperature structural phase boundaries in lithium isotopes. We map the structural phase diagram of 7 Li from 5 to 55 GPa and 15–75 K, identifying the sequence fcc → ℎ⁡R⁢1 → cI16. A pronounced isotope effect is observed, with 6 Li shifting the fcc → ℎ⁡R⁢1 phase boundary to lower pressures at 15 K. Density functional theory calculations further clarify how these structural changes affect superconducting properties, particularly emphasizing the role of the fcc → ℎ⁡R⁢1 transition in lithium's superconductivity. Furthermore, our findings offer insights into the unique behavior of lithium isotopes under pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thermodynamics of gallium-stabilized delta-plutonium: A high-temperature drop calorimetry study

Throughout the Cold War (1947–1991), both the United States and the former Soviet Union independently derived a phase diagram for the Pu-Ga system that has different implications on Pu phase stability. In the phase diagram produced by the United States, the Pu δ-phase is thermodynamically stable at room temperatures when Ga content is between 2 and 9 at. %. The diagram produced by the Soviet Union shows the δ-phase undergoing an eutectoid decomposition into the α-Pu + α-Pu 3 Ga at 7.9 at. % Ga and 370 K. This would suggest that Ga-stabilized δ-Pu is metastable with respect to α-Pu + α-Pu 3 Ga at 298 K. To investigate this, and the thermodynamic behavior of Ga in the FCC lattice of δ-Pu, we have utilized high-temperature drop calorimetry to study the enthalpy of formation of two δ-Pu 1−x Ga x compositions. In doing so, mixing models (regular and subregular) were developed to understand the thermodynamic behavior of Ga in the FCC lattice of δ-Pu and found a strong departure from ideal conditions, which suggests Ga ordering in the FCC lattice of δ-Pu. Overall, it was found that δ-Pu 1−x Ga x is enthalpically metastable with respect to α-Pu + Pu 3 Ga at 298 K.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Irradiation Tailoring of Deformation-Induced Phase Transformations

The objective of this project is to understand how irradiation enables deformation‐induced phase transformations in fcc metallic alloys. Low‐temperature deformation of face centered cubic (fcc) metals and alloys can occur through several modes, one of which is martensitic transformation, wherein fcc γ‐Fe austenite reverts to hexagonal close packed (hcp) ε‐ martensite or body centered cubic (bcc) α’‐martensite. Irradiation is believed to enhance the tendency for this transformation to occur, considering that irradiation similarly enhances other low‐temperature deformation modes such as dislocation channeling and deformation twinning. However, the mechanisms underlying the irradiation enhancement of martensitic transformations remain unknown.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Degradation science: Integrating modeling and experiments to predict localized corrosion processes (Annual Progress Report)

Additively manufactured (AM) eutectic high-entropy alloys (EHEAs), such as nano-lamellar AlCoCrFeNi 2.1 , have excellent strength, ductility, and wear resistance even at elevated temperatures, but their corrosion behavior in aggressive acids at different length scales remain poorly understood. This work investigates the corrosion behavior of laser powder bed–fused (L-PBF) AlCoCrFeNi 2.1 as a function of annealing temperatures, probing degradation mechanisms from nanoscopic to macroscopic length scales. The alloy is dual phase consisting of a ductile FCC L1 2 phase and a high-strength BCC B2 phase. Rapid solidification during L-PBF produces a far-from-equilibrium nano-lamellar structure with nearly homogeneous elemental distribution, which tends to evolve upon annealing toward Cr/Co/Fe-enriched FCC and Al/Ni-enriched B2. Three conditions were studied: as-printed, 600 °C/5 h, and 1000 °C/1 h, over which B2 lamellae coarsen, lamellar spacing increases, and elemental segregation becomes more prominent. Microstructure and chemistry were characterized by scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS), while in-situ electrochemical atomic force microscopy (EC-AFM) was used to link early (<5 h) local dissolution to microstructure after exposure in sulfuric acid. EC-AFM highlights preferential dissolution of the BCC/B2 phase where the surrounding matrix is Cr-depleted and directly quantifies the dissolution rates within individual phases, tracks the transition from early nano-scale attack to partial repassivation, to correlate height differences with current and impedance responses. To monitor longer-term behavior (up to 96 h), ex-situ AFM, SEM, and confocal imaging were combined with conventional bulk electrochemical tests, bridging nanoscale observations to micro/meso-scale damage morphologies. At the meso-scale, the deepest dissolution channels align with the build-direction lamellae and melt-pool boundaries, indicating that printing directionality guides the propagation of these localized corrosion sites. Annealing modifies corrosion by restructuring BCC/FCC phase fractions, lamellar spacing, and Cr/Al segregation, thereby changing the cathode/anode ratio and passive film stability. The results clarify how as-printed and annealed nano-lamellar architectures differ in their susceptibility to selective dissolution; how elemental segregation competes with residual stresses along the build direction. With these insights, future work will use CALPHAD-guided alloy modification to stabilize higher Cr contents in the B2 phase while retaining a dominant FCC+B2/BCC microstructure, with the goal of designing mechanically robust, corrosion-resistant EHEAs for safety-critical applications to leverage the LLNL’s broader national and global security mission.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Flat-conductor cable has rotary and linear flexibility

Report describes capabilities and limitations of flat-conductor cable /FCC/ relative to flexure in bending, folding, rotating, and extending, it also compares FCC mechanical and endurance characteristics with round-wire cable, and compares qualities of various types of insulation for FCC. Several configurations exemplify FCC flexibility.

Carden, J. R.↗
NASA NTRS1972

Termination of flat conductor cable to NASA/MSFC plugs

Data, supplemented with artwork, are presented on the major steps involved with terminating flat conductor cable (FCC) to MSFC's FCC plugs. Cable and shield preparation steps include material cutting, insulation stripping, and plating of exposed conductors. Methods and equipment required to terminate FCC to each of four MSFC plugs are described.

Angele, W.↗
NASA NTRS1973

Flat Conductor Cable systems - Originally developed for space flight, useful for commercial applications

Flat Conductor Cable (FCC) technology has now reached a level of development where it is being considered for, and used in, numerous interconnection projects. First developed for aerospace use, FCC is becoming a major contender for commercial wiring tasks as well. This presentation is designed to show why and how FCC has been able to make the transition from the aerospace to the commercial field.

Angele, W.↗
NASA NTRS1975

Flight simulation for flight control computer S/N 0104-1 (ASTP)

Flight control computer (FCC) 0104-I has been designated the prime unit for the SA-210 launch vehicle. The results of the final flight simulation for FCC S/N 0104-I are documented. These results verify satisfactory implementation of the design release and proper interfacing of the FCC with flight-type control sensor elements and simulated thrust vector control system.

Source record↗
NASA NTRS1976

Relative stiffness of flat conductor cables

The measurement of the bending moment required to obtain a given deflection in short lengths of flat conductor cable (FCC) is presented in this report. Experimental data were taken on 10 different samples of FCC and normalized to express all bending moments (relative stiffness factor) in terms of a cable 5.1 cm (2.0 in.) in width. Data are presented in tabular and graphical form for the covenience of designers who may be interested in finding torques exerted on critical components by short lengths of FCC.

Hankins, J. D.↗
NASA NTRS1984

Characterization of erosion of metallic materials under cavitation attack in a mineral oil

Cavitation erosion and erosion rates of eight metallic materials representing three crystal structures were studied using a 20-kHz ultrasonic magnetostrictive oscillator in viscous mineral oil. The erosion rates of the metals with an fcc matrix were 10 to 100 times higher than that of an hcp-matrix titanium alloy. The erosion rates of iron and molybdenum, with bcc matrices, were higher than that of the titanium alloy but lower than those of the fcc metals. Scanning electron microscopy indicates that the cavitation pits are initially formed at the grain boundaries and precipitates and that the pits that formed at the triple points grew faster than the others. Transcrystalline craters formed by cavitation attack over the surface of grains and roughened the surfaces by multiple slip and twinning. Surface roughness measurements show that the pits that formed over the grain boundaries deepended faster than other pits. Computer analysis revealed that a geometric expression describes the nondimensional erosion curves during the time period 0.5 t(0) t 2.5 t(0), where t(0) is the incubation period. The fcc metals had very short incubation periods; the titanium alloy had the longest incubation period.

Rao, B. C. S.↗
NASA NTRS1985

Characterization of erosion of metallic materials under cavitation attack in a mineral oil

Cavitation erosion and erosion rates of eight metallic materials representing three crystal structures were studied. The erosion experiments were conducted with a 20-kHz ultrasonic magnetostrictive oscillator in a viscous mineral oil. The erosion rates of the metals with an fcc matrix were 10 to 100 times higher than that of an hop-matrix titanium alloy. The erosion rates of iron and molybdenum, with bcc matrices, were higher than that of the titanium alloy but lower than those of those of the fcc materials. Studies with scanning electron microscopy indicated that the cavitation pits were initially formed at the grain boundaries and precipitates and that the pits formed at the junction of grain boundaries grew faster than the others. Transcrystalline craters formed by cavitation attack over the surface of grains and roughened the surfaces by multiple slip and twinning. Surface roughness measurements showed that the pits that formed over the grain boundaries deepened faster than pits. Computer analysis revealed that a geometric expression describes the nondimensional erosion curves during the time period 0.5 t (sub 0) t 2.5 t (sub 0), where t (sub 0) is the incubation period. The fcc metals had very short incubation periods; the titanium alloy had the longest incubation period.

Rao, B. C. S.↗