Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observer Mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Functional lipid pairs as building blocks of phase-separated membranes

Biological membranes exhibit a great deal of compositional and phase heterogeneity due to hundreds of chemically distinct components. As a result, phase separation processes in cell membranes are extremely difficult to study, especially at the molecular level. It is currently believed that the lateral membrane heterogeneity and the formation of domains, or rafts, are driven by lipid–lipid and lipid–protein interactions. Nevertheless, the underlying mechanisms regulating membrane heterogeneity remain poorly understood. In the present work, we combine inelastic X-ray scattering with molecular dynamics simulations to provide direct evidence for the existence of strongly coupled transient lipid pairs. These lipid pairs manifest themselves experimentally through optical vibrational (a.k.a. phononic) modes observed in binary (1,2-dipalmitoyl- sn -glycero-3-phosphocholine [DPPC]–cholesterol) and ternary (DPPC–1,2-dioleoyl- sn -glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-glycero-3-phosphocholine [DOPC/POPC]–cholesterol) systems. The existence of a phononic gap in these vibrational modes is a direct result of the finite size of patches formed by these lipid pairs. The observation of lipid pairs provides a spatial (subnanometer) and temporal (subnanosecond) window into the lipid–lipid interactions in complex mixtures of saturated/unsaturated lipids and cholesterol. Our findings represent a step toward understanding the lateral organization and dynamics of membrane domains using a well-validated probe with a high spatial and temporal resolution.

60 APPLIED LIFE SCIENCES↗

Exploring Excited State Proton Transfer Dynamics upon Ultraviolet Excitation

Excited state intramolecular proton transfer (ESIPT) has been investigated in two prototypical systems─salicylaldehyde azine (SAA) and 1,5-dihydroxyanthraquinone (DHAQ)─using transient absorption spectroscopy upon ultraviolet excitation into the less studied higher excited (S n ) manifold. Excitation with sub-30 fs pulses and broadband visible probing has allowed for direct measurement of the ESIPT rate. In conjunction with steady-state measurements and TD-DFT calculations, a complete delineation of the ultrafast photophysics has been carried out. In SAA, ESIPT remains ultrafast (∼30 fs), consistent with previous S 1 excitation studies. Coherent vibrational beats maps reveal significant wavelength dependence, however. Theoretical analysis suggests that the observed modes and their intensities in coherent vibrational spectra are modulated by the nature of the electronically excited state. In DHAQ, the first direct observation of ESIPT presents a time-constant of ∼85 fs, and a slower component of 9 ps, akin to previous reports on double-proton transfer systems. Collectively, the results suggest that while the ultrafast ESIPT rate remains largely invariant vis-à-vis the excitation energy, the product yield, as well as accompanying coherent oscillations, may be substantively altered, owing to the existence of alternative decay pathways.

excited states↗

An Investigation of Digital Instrumentation and Control System Failure Modes

A study sponsored by the Nuclear Regulatory Commission study was conducted to investigate digital instrumentation and control (DI&C) systems and module-level failure modes using a number of databases both in the nuclear and non-nuclear industries. The objectives of the study were to obtain relevant operational experience data to identify generic DI&C system failure modes and failure mechanisms, and to obtain generic insights, with the intent of using results to establish a unified framework for categorizing failure modes and mechanisms. Of the seven databases studied, the Equipment Performance Information Exchange database was found to contain the most useful data relevant to the study. Even so, the general lack of quality relative to the objectives of the study did not allow the development of a unified framework for failure modes and mechanisms of nuclear I&C systems. However, an attempt was made to characterize all the failure modes observed (i.e., without regard to the type of I&C equipment under consideration) into common categories. It was found that all the failure modes identified could be characterized as (a) detectable/preventable before failures, (b) age-related failures, (c) random failures, (d) random/sudden failures, or (e) intermittent failures. The percentage of failure modes characterized as (a) was significant, implying that a significant reduction in system failures could be achieved through improved online monitoring, exhaustive testing prior to installation, adequate configuration control or verification and validation, etc.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Surface Reactivity Analysis of the Crude Oil–Brine–Limestone Interface for a Comprehensive Understanding of the Low-Salinity Waterflooding Mechanism

Low-salinity waterflooding (LSWF) has proven to improve oil recovery in carbonate formations through rock wettability alteration, although the underlying mechanism remains elusive. Multivalent ionic exchange and calcite dissolution have usually been investigated using geochemical analysis in secondary coreflooding. In this work, coreflooding, in tertiary mode, coupled with a surface reactivity analysis approach was employed to investigate the interplay of wettability alteration mechanisms such as mineral dissolution, electrostatic bond attraction, and the effect of pH at in situ conditions. Improved oil recovery (IOR) in tertiary mode observed by coreflooding in Indiana limestone rocks showed an ionic strength dependence, that is, reducing brine ionic strength resulted in an increase in oil recovery. Coreflooding results showed that the seawater and low-salinity brines deprived of Mg 2+ ions resulted in the lowest IOR in tertiary mode, indicating the significance of Mg 2+ on IOR in limestone rocks. Similar results were observed through the contact angle measurement showing the limestone rock wettability state dependence on ionic strength and the effect of Mg2+ ions. Surface reactivity analysis showed an increase in solution pH, Ca 2+ and Mg 2+ ions concentration in the effluent solution from the coreflooding in tertiary mode using low salinity brines (about 40 and 20% increase in the effluent composition for Ca 2+ and Mg 2+ , respectively). These changes in solution composition were used to calculate the in situ oil–brine and rock–brine zeta potential using a validated surface complexation model, showing the changes of zeta potential as brine is injected into limestone rocks. The results show that using seawater-like brine in tertiary mode resulted in no mineral dissolution or ionic exchange. However, improved oil recovery (IOR) using such seawater-like brine was due to wettability alteration caused by reduced electrostatic bond attraction associated with Mg 2+ ions [from 2.6 × 10 –13 (mol/m 2 ) 2 for formation water salinity to 1.5 × 10 –13 (mol/m 2 ) 2 for seawater salinity]. Using low-salinity brines in tertiary mode improved oil recovery by mineral dissolution, resulting in oil desorption and an increase in solution pH. Finally, the increase in solution pH also resulted in reduced electrostatic bond attraction which lead to rock wettability alteration using low-salinity brines.

04 OIL SHALES AND TAR SANDS↗

SIMULATED LSST SURVEY OF RR LYRAE STARS THROUGHOUT THE LOCAL GROUP

We report on a study to determine the efficiency of the Large Synoptic Survey Telescope (LSST) to recover the periods, brightnesses, and shapes of RR Lyrae stars' light curves in the volume extending to heliocentric distances of 1.5 Mpc. We place the smoothed light curves of 30 type ab and 10 type c RR Lyrae stars in 1007 fields across the sky, each of which represents a different realization of the LSST sampling cadences, and that sample five particular observing modes. A light curve simulation tool was used to sample the idealized RR Lyrae stars' light curves, returning each as it would have been observed by LSST, including realistic photometric scatter, limiting magnitudes, and telescope downtime. We report here the period, brightness, and light curve shape recovery as a function of apparent magnitude and for survey lengths varying from 1 to 10 years. We find that 10 years of LSST data are sufficient to recover the pulsation periods with a fractional precision of {approx}10{sup -5} for {>=}90% of ab stars within Almost-Equal-To 360 kpc of the Sun in Universal Cadence fields and out to Almost-Equal-To 760 kpc for Deep Drilling fields. The 50% completeness level extends to Almost-Equal-To 600 kpc and Almost-Equal-To 1.0 Mpc for the same fields, respectively. For virtually all stars that had their periods recovered, their light curve shape parameter {phi}{sub 31} was recovered with sufficient precision to also recover photometric metallicities to within 0.14 dex (the systematic error in the photometric relations). With RR Lyrae stars' periods and metallicities well measured to these distances, LSST will be able to search for halo streams and dwarf satellite galaxies over half of the Local Group, informing galaxy formation models and providing essential data for mapping the Galactic potential. This study also informs the LSST science operations plan for optimizing observing strategies to achieve particular science goals. We additionally present a new [Fe/H]-{phi}{sub 31} photometric relation in the r band and a new and generally useful metric for defining period recovery for time domain surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Young Stellar Objects, Accretion Disks, and Their Variability with Rubin Observatory LSST

Vera C. Rubin Observatory, through the Legacy Survey of Space and Time (LSST), will allow us to derive a panchromatic view of variability in young stellar objects (YSOs) across all relevant timescales. Indeed, both short-term variability (on timescales of hours to days) and long-term variability (months to years), predominantly driven by the dynamics of accretion processes in disk-hosting YSOs, can be explored by taking advantage of the multiband filters option available in Rubin LSST, in particular the u, g, r, i filters that enable us to discriminate between photospheric stellar properties and accretion signatures. The homogeneity and depth of sky coverage that will be achieved with LSST will provide us with a unique opportunity to characterize the time evolution of disk accretion as a function of age and varying environmental conditions (e.g., field crowdedness, massive neighbors, metallicity) by targeting different star-forming regions. In this contribution to the Rubin LSST Survey Strategy Optimization Focus Issue, we discuss how implementing a dense observing cadence to explore short-term variability in YSOs represents a key complementary effort to the Wide–Fast–Deep observing mode that will be used to survey the sky over the full duration of the main survey (≈10 yr). The combination of these two modes will be vital to investigate the connection between the inner-disk dynamics and longer-term eruptive variability behaviors, such as those observed on EX Lupi–type objects.

79 ASTRONOMY AND ASTROPHYSICS↗

Transition characteristics of low-pressure discharges in a hollow cathode

Based on a two-dimensional (2-D) fluid model, the transition processes of discharges in a hollow cathode at low pressure are observed by changing three parameters, i.e., applied voltage U 0 , gas pressure p, and external circuit ballast resistance R b . The voltage-current characteristic curves, electron density distributions, and electric potential distributions of different discharge operating points in a hollow cathode are obtained. The transition processes are characterized by the voltage-current characteristic curves, the electron density distributions, and the electrical potential distributions. The transition modes observed from the voltage-current characteristics include the low-current abnormal mode, normal mode, and high-current abnormal mode. Increasing the applied voltage U0 can have a similar effect on the discharge transition processes to decreasing the ballast resistance. By increasing U0 from 200V to 500V and decreasing Rb from 5000 kX to 100 kX independently, it is observed that the discharge transfers from the outside to the inside of the hollow cavity, thus forming the virtual anode potential. By increasing the gas pressure p from 50 Pa to 5 kPa, the discharge also moves into the hollow cavity from the outside; however, a further increase in the gas pressure leads to the discharge escaping from the hollow cavity. Simulation results and characterizations for different parameters are presented for the transition properties of low-pressure discharges in a hollow cathode. It is verified that the hollow cathode discharge only exists under certain ranges of the above parameters.

42 ENGINEERING↗

MULTIWAVELENGTH IMAGING AND SPECTROSCOPY OF CHROMOSPHERIC EVAPORATION IN AN M-CLASS SOLAR FLARE

We study spectroscopic observations of chromospheric evaporation mass flows in comparison with the energy input by electron beams derived from hard X-ray (HXR) data for the white-light M2.5 flare of 2006 July 6. The event was captured in high-cadence spectroscopic observing mode by SOHO/CDS combined with high-cadence imaging at various wavelengths in the visible, extreme ultraviolet, and X-ray domain during the joint observing campaign JOP171. During the flare peak, we observe downflows in the He I and O V lines formed in the chromosphere and transition region, respectively, and simultaneous upflows in the hot coronal Si XII line. The energy deposition rate by electron beams derived from RHESSI HXR observations is suggestive of explosive chromospheric evaporation, consistent with the observed plasma motions. However, for a later distinct X-ray burst, where the site of the strongest energy deposition is exactly located on the Coronal Diagnostics Spectrometer (CDS) slit, the situation is intriguing. The O V transition region line spectra show the evolution of double components, indicative of the superposition of a stationary plasma volume and upflowing plasma elements with high velocities (up to 280 km s{sup -1}) in single CDS pixels on the flare ribbon. However, the energy input by electrons during this period is too small to drive explosive chromospheric evaporation. These unexpected findings indicate that the flaring transition region is much more dynamic, complex, and fine structured than is captured in single-loop hydrodynamic simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Constraints on Neutron Star Crusts from Oscillations in Giant Flares

We show that the fundamental seismic shear mode, observed as a quasiperiodic oscillation in giant flares emitted by highly magnetized neutron stars, is particularly sensitive to the nuclear physics of the crust. The identification of an oscillation at {approx_equal}30 Hz as the fundamental crustal shear mode requires a nuclear symmetry energy that depends very weakly on density near saturation. If the nuclear symmetry energy varies more strongly with density, then lower frequency oscillations, previously identified as torsional Alfven modes of the fluid core, could instead be associated with the crust. If this is the case, then future observations of giant flares should detect oscillations at around 18 Hz. An accurate measurement of the neutron-skin thickness of lead will also constrain the frequencies predicted by the model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Cyber Threat Mitigation Approach For Wide Area Control of SVCs using Stability Monitoring

We propose a stability monitoring approach for the mitigation of cyber threats directed at the wide area control (WAC) system used for coordinated control of Flexible AC Transmission Systems (FACTS) used for power oscillation damping (POD) of active power flow on inter-area tie lines. The approach involves monitoring the modes of the active power oscillation on an inter-area tie line using the Matrix Pencil (MP) method. We use the stability characteristics of the observed modes as a proxy for the presence of destabilizing cyber threats. We monitor the system modes to determine whether any destabilizing modes appear after the WAC system engages to control the POD. If the WAC signal exacerbates the POD performance, the FACTS falls back to POD using local measurements. The proposed approach does not require an expansive system-wide view of the network. We simulate replay, control integrity, and timing attacks for a test system and present results that demonstrate the performance of the SM approach for mitigation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Effect of Pr- and Nd- doping on structural, dielectric, and magnetic properties of multiferroic Bi{sub 0.8}La{sub 0.2}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}

Bi{sub 0.8}La{sub 0.15}RE{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} (where RE = Pr and Nd) have been prepared via conventional solid state route. The Rietveld refinement of X-ray diffraction patterns shows that both systems crystallize in orthorhombic Pnma space group. Raman modes observed for these two systems indicate that both systems are very close to orthorhombic Pnma structure. Appearance of prominent A{sub 1}-3 and weak E-2 modes in Bi{sub 0.8}La{sub 0.15}Nd{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} indicate the presence of chemically more active Bi-O covalent bonds (which favors stereochemical activity of Bi lone pair electrons) in comparison to Bi{sub 0.8}La{sub 0.15}Pr{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}. Moreover, Bi{sub 0.8}La{sub 0.15}Nd{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} system shows higher dielectric constant, low dielectric loss, and higher magnetization value in comparison to Bi{sub 0.8}La{sub 0.15}Pr{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} system. Ferroelectric transition temperature decreases to 460 °C for both systems in comparison to 710 °C of Bi{sub 0.8}La{sub 0.2}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}. The improved dielectric and magnetic response suggests Bi{sub 0.8}La{sub 0.15}Nd{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} a better multiferroic system than Bi{sub 0.8}La{sub 0.15}Pr{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flaw detection in a multi-material multi-layered composite: using fem and air-coupled ut

Ceramic tiles are the main ingredient of a multi-layer multi-material composite being considered for the modernization of tank armors. The high stiffness, low attenuation, and precise dimensions of these uniform tiles make them remarkable resonators when driven to vibrate. This study is aimed at modeling the vibration modes of the tiles and the composite lay-up with finite element analysis and comparing the results with the resonance modes observed in air-coupled ultrasonic excitation of the tiles and armor samples. Defects in the tile, during manufacturing and/or after usage, are expected to change the resonance modes. The comparison of a pristine tile/lay-up and a defective tile/lay-up will thus be a quantitative damage metric. The understanding of the vibration behavior of the tile, both by itself and in the composite lay-up, can provide useful guidance to the nondestructive evaluation of armor panels containing ceramic tiles.

36 MATERIALS SCIENCE↗

Correlation of Qualification and Accelerated Testing with Field Degradation

Qualification testing of solar photovoltaic (PV) modules per IEC 61215 standard encompasses a set of well-defined accelerated stress tests (irradiation, environmental, mechanical and electrical) with strict pass/fail criteria based on functionality/performance, electrical and mechanical safety, and visual requirements. The qualification testing does not identify all the possible reliability failures or durability issues witnessed in the actual field. However, it does identify the major/catastrophic design quality issues (infant mortality), which could occur early in a module’s field life. Unfortunately, in the industry, there is no consensus-based standard or protocol available to validate manufacturers’ warranty period claims based on the end-of-life wear-out failure mechanisms. Being able to predict the field degradation rates and lifetime using mode-specific accelerated tests on moderately field-aged modules, for example 10 years, for certain commonly occurring degradation modes would be a powerful contribution to all the stakeholders of the PV industry. There is a need to formulate guidelines to find the correlation of accelerated testing with field degradation for individual degradation modes observed in the field. Potential approaches to fulfill this need were experimented in this project and are presented in this report. Two of the most commonly seen degradation modes – encapsulant browning and solder bond thermomechanical fatigue – are addressed in this report through presenting the accelerated testing methods and physical modelling approaches. Two accelerated test methods (UV and thermal cycling) were designed to induce the wear-out mechanisms in the modules and not infant mortality failures. To focus on the wear-out failure modes, the tests were performed on field-aged modules, instead of fresh modules, with known degradation rates and degradation modes. The degradation rates were measured based on the degradation rates of individual cell parameters (short-circuit current, I sc and series resistance, R s ) instead of the degradation rate of maximum power (P max ) which cannot be used to study any specific/limited degradation mode as the P max degradation could be caused by many different degradation modes. The key characteristic parameter considered for encapsulant discoloration and solder bond degradation is I sc and R s , respectively. The developed physical models/equations relating the testing degradation data and field weather data were utilized to determine the acceleration factor (AF) and to predict the degradation rate for a specific degradation mode of PV modules installed in two different climates, Arizona (hot) and New York (cold). The predicted degradation rates for encapsulant browning and solder bond degradation have also been validated against the actual measured field degradation rates. UV testing cost reduction: To determine acceleration factor, single UV chamber was used for accelerated UV testing at three different temperatures simultaneously, instead of three chambers for three temperatures (or one chamber sequentially which is an extremely time-consuming approach). A passive heating approach was successfully used to achieve and maintain multiple temperatures in the accelerated UV chamber. Foam insulation boards of varying thicknesses were utilized to obtain three different temperatures for UV testing. However, these foam materials tend to disintegrate in the presence of moisture. To alleviate this problem, silicone heating blankets with temperature controls and humidifier can be used if the UV testing is to be performed under hot-humid conditions instead of conventional hot-dry conditions. Thermal cycling testing cost reduction: Single thermal cycling chamber was used for accelerated thermal cycling testing at three different upper temperatures simultaneously, instead of three chambers for three upper temperatures (or one chamber sequentially which is an extremely time-consuming approach). An active heating approach based on silicone heating blankets was successfully used to achieve and maintain multiple upper temperatures in the accelerated thermal cycling chamber. Such blankets provide stable temperature control and thereby more reliable and repeatable for replicate experiments.

14 SOLAR ENERGY↗

Infrared absorption of t-HOCO{sup +}, H{sup +}(CO{sub 2}){sub 2}, and HCO{sub 2}{sup −} produced in electron bombardment of CO{sub 2} in solid para-H{sub 2}

We have employed electron bombardment during matrix deposition of CO{sub 2} (or {sup 13}CO{sub 2}, C{sup 18}O{sub 2}) and para-hydrogen (p-H{sub 2}) at 3.2 K and recorded infrared (IR) spectra of t-HOCO{sup +}, H{sup +}(CO{sub 2}){sub 2}, HCO{sub 2}{sup −}, CO{sub 2}{sup −}, t-HOCO, and other species isolated in solid p-H{sub 2}. After the matrix was maintained in darkness for 13 h, intensities of absorption features of t-HOCO{sup +} at 2403.5 (ν{sub 1}), 2369.9 (ν{sub 2}), 1018.1 (ν{sub 4}), and 606.5 (ν{sub 6}) cm{sup −1} and those of H{sup +}(CO{sub 2}){sub 2} at 1341.1, 883.6, and 591.5 cm{sup −1} decreased. Corresponding lines of isotopologues were observed when {sup 13}CO{sub 2} or C{sup 18}O{sub 2} replaced CO{sub 2}. In contrast, lines of HCO{sub 2}{sup −} at 2522.4 (ν{sub 1}), 1616.1 (ν{sub 5}), 1327.9 (ν{sub 2}), and 745.6 (ν{sub 3}) cm{sup −1} increased in intensity; corresponding lines of H{sup 13}CO{sub 2}{sup −} or HC{sup 18}O{sub 2}{sup −} were also observed. Lines of t-DOCO{sup +} and DCO{sub 2}{sup −} were observed in an electron bombarded CO{sub 2} /normal-deuterium (n-D{sub 2}) matrix. Data of ν{sub 6} of t-HOCO{sup +} and all observed modes of H{sup 18}OC{sup 18}O{sup +} and HC{sup 18}O{sub 2}{sup −} are new. The assignments were made according to expected chemical behavior, observed isotopic shifts, and comparisons with vibrational wavenumbers and relative intensities of previous reports and calculations with the B3PW91/aug-cc-pVQZ method. The ν{sub 1} line of t-HOCO{sup +} in solid p-H{sub 2} (2403.5 cm{sup −1}), similar to the line at 2673 cm{sup −1} of t-HOCO{sup +} tagged with an Ar atom, is significantly red-shifted from that reported for gaseous t-HOCO{sup +} (3375.37 cm{sup −1}) due to partial proton sharing between CO{sub 2} and H{sub 2} or Ar. The ν{sub 1} line of HCO{sub 2}{sup −} in solid p-H{sub 2} (2522.4 cm{sup −1}) is blue shifted from that reported for HCO{sub 2}{sup −} in solid Ne (2455.7 cm{sup −1}) and that of HCO{sub 2}{sup −} tagged with Ar (2449 cm{sup −1}); this can be explained by the varied solvation effects by Ne, Ar, or H{sub 2} on the mixing of H{sup +} + CO{sub 2} and H + CO{sub 2}{sup −} surfaces. Possible formation mechanisms of t-HOCO{sup +}, H{sup +}(CO{sub 2}){sub 2}, HCO{sub 2}{sup −}, CO{sub 2}{sup −}, t-HOCO, H{sub 2}O, and t-HCOOH are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conformational Changes and Substrate Recognition in Pseudomonas aeruginosa d-Arginine Dehydrogenase

DADH catalyzes the flavin-dependent oxidative deamination of D-amino acids to the corresponding {alpha}-keto acids and ammonia. Here we report the first X-ray crystal structures of DADH at 1.06 {angstrom} resolution and its complexes with iminoarginine (DADH{sub red}/iminoarginine) and iminohistidine (DADH{sub red}/iminohistidine) at 1.30 {angstrom} resolution. The DADH crystal structure comprises an unliganded conformation and a product-bound conformation, which is almost identical to the DADH{sub red}/iminoarginine crystal structure. The active site of DADH was partially occupied with iminoarginine product (30% occupancy) that interacts with Tyr53 in the minor conformation of a surface loop. This flexible loop forms an 'active site lid', similar to those seen in other enzymes, and may play an essential role in substrate recognition. The guanidinium side chain of iminoarginine forms a hydrogen bond interaction with the hydroxyl of Thr50 and an ionic interaction with Glu87. In the structure of DADH in complex with iminohistidine, two alternate conformations were observed for iminohistidine where the imidazole groups formed hydrogen bond interactions with the side chains of His48 and Thr50 and either Glu87 or Gln336. The different interactions and very distinct binding modes observed for iminoarginine and iminohistidine are consistent with the 1000-fold difference in k{sub cat}/K{sub m} values for D-arginine and D-histidine. Comparison of the kinetic data for the activity of DADH on different D-amino acids and the crystal structures in complex with iminoarginine and iminohistidine establishes that this enzyme is characterized by relatively broad substrate specificity, being able to oxidize positively charged and large hydrophobic D-amino acids bound within a flask-like cavity.

08 HYDROGEN↗

Observation of Rayleigh-Taylor-instability evolution in a plasma with magnetic and viscous effects

We present time-resolved observations of Rayleigh-Taylor-instability (RTI) evolution at the interface between an unmagnetized plasma jet colliding with a stagnated, magnetized plasma. The observed instability growth time (~10μs) is consistent with the estimated linear RTI growth rate calculated using experimentally inferred values of density (~10 14 cm–3) and deceleration (~10 9 m/s 2 ). The observed mode wavelength (≳1 cm) nearly doubles within a linear growth time. Furthermore, theoretical estimates of magnetic and viscous stabilization and idealized magnetohydrodynamic simulations including a physical viscosity model both suggest that the observed instability evolution is subject to magnetic and/or viscous effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

OBSERVATIONS OF SAUSAGE MODES IN MAGNETIC PORES

We present here evidence for the observation of the magnetohydrodynamic (MHD) sausage modes in magnetic pores in the solar photosphere. Further evidence for the omnipresent nature of acoustic global modes is also found. The empirical decomposition method of wave analysis is used to identify the oscillations detected through a 4170 A 'blue continuum' filter observed with the Rapid Oscillations in the Solar Atmosphere (ROSA) instrument. Out of phase, periodic behavior in pore size and intensity is used as an indicator of the presence of magnetoacoustic sausage oscillations. Multiple signatures of the magnetoacoustic sausage mode are found in a number of pores. The periods range from as short as 30 s up to 450 s. A number of the magnetoacoustic sausage mode oscillations found have periods of 3 and 5 minutes, similar to the acoustic global modes of the solar interior. It is proposed that these global oscillations could be the driver of the sausage-type magnetoacoustic MHD wave modes in pores.

79 ASTRONOMY AND ASTROPHYSICS↗

Oscillatory cellular patterns in three-dimensional directional solidification

We present a phase-field study of oscillatory breathing modes observed during the solidification of three-dimensional cellular arrays in micro-gravity. Directional solidification experiments conducted onboard the International Space Station have allowed for the first time to observe spatially extended homogeneous arrays of cells and dendrites while minimizing the amount of gravity-induced convection in the liquid. In situ observations of transparent alloys have revealed the existence, over a narrow range of control parameters, of oscillations in cellular arrays with a period ranging from about 25 to 125 minutes. Cellular patterns are spatially disordered, and the oscillations of individual cells are spatiotemporally uncorrelated at long distance. However, in regions displaying short-range spatial ordering, groups of cells can synchronize into oscillatory breathing modes. Quantitative phase-field simulations show that the oscillatory behavior of cells in this regime is linked to a stability limit of the spacing in hexagonal cellular array structures. For relatively high cellular front undercooling (\ie low growth velocity or high thermal gradient), a gap appears in the otherwise continuous range of stable array spacings. Close to this gap, a sustained oscillatory regime appears with a period that compares quantitatively well with experiment. For control parameters where this gap exist, oscillations typically occur for spacings at the edge of the gap. However, after a change of growth conditions, oscillations can also occur for nearby values of control parameters where this gap just closes and a continuous range of spacings exists. In addition, sustained oscillations at to the opening of this stable gap exhibit a slow periodic modulation of the phase-shift among cells with a slower period of several hours. While long-range coherence of breathing modes can be achieved in simulations for a perfect spatial arrangement of cells as initial condition, global disorder is observed in both three-dimensional experiments and simulations from realistic noisy initial conditions. The, erratic tip splitting events promoted by large amplitude oscillations contribute to maintaining the long-range array disorder, unlike in thin sample experiments where long-range coherence of oscillations is experimentally observable.

36 MATERIALS SCIENCE↗