Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical waveguides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Mode competition in steady-state optical waveguide amplifiers

A theory of monochromatic light propagation in a fiber amplifier is developed. It is shown that competition between coherent gain-guided modes is qualitatively different from interaction between incoherent beams. Spatial beating between modes limits the gain of the mode with lower input power even if the corresponding modal gain coefficient is higher. Depending on the input beam parameters, the amplifier output can be dominated by either a single guided mode or their combination. The theory is illustrated by analyzing the gain behavior of a single planar waveguide and arrays of two and three narrow planar waveguides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of semiconductor clad optical waveguides

Glass waveguides are studied because of the ease and economy of fabricating devices in glass. All calculations are based on the assumption of a glass guide and substrate, but the effects being studied will occur on other materials if the proper refractive indices are used in the calculations.

Batchman, T. E.↗

Polarization effects in silicon-clad optical waveguides

By changing the thickness of a semiconductor cladding layer deposited on a planar dielectric waveguide, the TE or TM propagating modes may be selectively attenuated. This polarization effect is due to the periodic coupling between the lossless propagating modes of the dielectric slab waveguide and the lossy modes of the cladding layer. Experimental tests involving silicon claddings show high selectivity for either polarization.

Carson, R. F.↗

Optical waveguides in oxygen-implanted buried-oxide silicon-on-insulator structures

An analysis is made of the waveguiding properties of the oxygen-implanted, buried-oxide, silicon-on-insulator structures currently being developed for use in microelectronics. It is found that in spite of the fact that the buried-oxide layer is only a few tenths of a micrometer thick, the single-crystal overlayer can support TEo guided-wave propagation, at subbandgap wavelengths, with losses due to substrate radiation leakage at or below the benchmark level of 1 dB/cm.

Kurdi, B. N.↗

Omnidirectional optical waveguide

In one embodiment, a system includes a scintillator material; a detector coupled to the scintillator material; and an omnidirectional waveguide coupled to the scintillator material, the omnidirectional waveguide comprising: a plurality of first layers comprising one or more materials having a refractive index in a first range; and a plurality of second layers comprising one or more materials having a refractive index in a second range, the second range being lower than the first range, a plurality of interfaces being defined between alternating ones of the first and second layers. In another embodiment, a method includes depositing alternating layers of a material having a relatively high refractive index and a material having a relatively low refractive index on a substrate to form an omnidirectional waveguide; and coupling the omnidirectional waveguide to at least one surface of a scintillator material.

36 MATERIALS SCIENCE↗

Optical waveguide methods for detecting internal faults in operating batteries

Light is transmitted from a light source through or from a separator of a battery cell and received by one or more light detectors. The light that is normally transmitted through the separator is scattered, absorbed, wavelength-shifted or otherwise distorted by an impending fault in the vicinity of or within the separator. The change in light due to the impending fault is measured by a detector and a signal from the detector is processed to identify the impending fault so that a warning can be generated indicative of the impending fault. In particular, the separator and a battery cell electrolyte can be selected to provide waveguide properties.

Saunders, James H.↗

Monolithic integration of optical waveguides with metal routing layers

A photonic integrated circuit and a method for its manufacture are provided. In an embodiment, an intermetal dielectric layer, for example, a silicon oxide layer, is contiguous between an upper metal layer and a lower metal layer on a substrate. One or more waveguides having top and bottom faces are formed in respective waveguide layers within the intermetal dielectric layer between the upper and lower metal layers. There is a distance of at least 600 nm from the upper metal layer to the top face of the uppermost of the several waveguides. There is a distance of at least 600 nm from the lower metal layer to the bottom face of the lowermost of the several waveguides. The waveguides are formed of silicon nitride for longer wavelengths and alumina for shorter wavelengths. These dimensions and materials are favorable for CMOS processing, among other things.

Gehl, Michael↗

Surface waves on the boundary of photonic crystals and tunnelling coupling between two photonic crystals via these waves

Based on coupled Nb{sub 2}O{sub 5}-SiO{sub 2} waveguides, one-dimensional photonic crystals are fabricated and surface waves at 0.63 {mu}m are generated at their boundary with air. A planar Bragg waveguide with an air core is fabricated due a contact of two photonic crystals through an air gap. The propagation constants of the symmetric and antisymmetric modes of the Bragg waveguide are measured and the value of the air gap of the waveguide is estimated. It is shown that, to obtain the fundamental modes of the Bragg waveguide based on the used waveguides, it is necessary to shift the working wavelength to the red and to increase the thickness of the air gap of the Bragg waveguide. (optical waveguides and fibres)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Advanced QPSK Optical Modulators Using Lithium Niobate Thin Films (Final Scientific Report)

Lithium niobate thin film based optical modulator devices have been produced using this SBIR award. A bonding apparatus was developed that was used to bond lithium niobate to silicon at room temperature. The bonding apparatus was designed, assembled and qualified for production of thin film substrates. The optical properties of ion sliced thin films produced using this bonding apparatus was optimized to achieve low loss optical waveguides. Optical grating coupler and other component of the proposed optical modulator were designed. Preliminary results show the proposed method for making optical modulator meets the required customer specifications. All the required process steps for manufacturing of the devices were developed and optimized. Further funding is required to make a final prototype device that can be provided to customers.

36 MATERIALS SCIENCE↗

Piezoelectric Nano-Optomechanical Systems

Lithium niobate, due to its material properties, is often used for optical waveguides, optical modulators, and other linear and nonlinear optical applications. In this research, we present monolithically integrated microdisk resonators with an integrated ground plane fabricated from a commercially purchased lithium niobate on insulator wafer. Using this architecture, we demonstrate excitation of a 167MHz mechanical resonance as well as electro-optic modulation of a 1.93THz optical mode in a free-standing whispering gallery mode (WGM) resonator. By hovering a signal probe above the disk while grounding the device using the integrated ground plane, an electric field can be applied across the device which both induces an electro-optic effect as well as drives mechanical motion via the piezoelectric effect. Detection of the mechanical mode and electro-optic shift was performed by coupling to the high quality factor (Q = 454,000) optical modes of the microresonator using a tapered optical fiber.

42 ENGINEERING↗

Optical Energy Transfer and Conversion System

An optical power transfer system comprising a fiber spooler, a fiber optic rotary joint mechanically connected to the fiber spooler, and an electrical power extraction subsystem connected to the fiber optic rotary joint with an optical waveguide. Optical energy is generated at and transferred from a base station through fiber wrapped around the spooler, through the rotary joint, and ultimately to the power extraction system at a remote mobility platform for conversion to another form of energy.

Stone, William C.↗

Optical Energy Transfer and Conversion System

An optical energy transfer and conversion system comprising a fiber spooler and an electrical power extraction subsystem connected to the spooler with an optical waveguide. Optical energy is generated at and transferred from a base station through fiber wrapped around the spooler, and ultimately to the power extraction system at a remote mobility platform for conversion to another form of energy. The fiber spooler may reside on the remote mobility platform which may be a vehicle, or apparatus that is either self-propelled or is carried by a secondary mobility platform either on land, under the sea, in the air or in space.

Stone, William C.↗

Integrated freeform optical couplers

Reflecting light beams off of microscale three-dimensional (3D) freeform surfaces can yield highly efficient coupling into and out of optical waveguides, optical fibers, and photonic chips. The structure of the 3D freeform reflective surface determines the shape of the reflected beam. This allows freeform reflectors to control the mode profile, rotation angle, and divergence angle of light beams. Control of beam shape enables mode matching between source output mode and target input mode, which results in low-loss optical coupling. An inventive freeform reflective surface can direct light beams in plane or out of plane via specular reflection or total internal reflection. A photonic integrated circuit with this type of freeform optical coupler can operate with a bandwidth range of at least 400 nm, potentially encompassing all visible or telecommunications wavelengths, and can be volume manufactured in photonic chips.

Yu, Shaoliang↗

Inertial references based on single mode optical fiber waveguides

Recent developments in low loss single mode optical fiber waveguides, semiconductor waveguide lasers and waveguide optical and electro-optical components have made a new class of rotational inertial frame references possible. The subclasses of possible fiber waveguide gyro configurations are discussed and one approach which is under development is reviewed. Signal detection and processing, error sources, expected physical and performance characteristics, and present development status are discussed.

Goss, W. C.↗

Optical coupler

Examples described herein relate to an optical coupler. The optical coupler may include a first optical waveguide base layer, a second optical waveguide base layer, an insulating layer disposed over at least a portion of both the first optical waveguide base layer and the second optical waveguide base layer, and a semiconductor material layer disposed over the insulating layer. Overlapping portions of the first optical waveguide base layer, the insulating layer, and the semiconductor material layer form a first optical waveguide, and overlapping portions of the second optical waveguide base layer, the insulating layer, and the semiconductor material layer form a second optical waveguide. Moreover, the optical coupler may include a plurality of metal contacts to receive one or more first biasing voltages to operate one of the first optical waveguide base layer and the second optical waveguide base layer in an accumulation mode.

Cheung, Stanley↗

Multichannel waveguides for the simultaneous detection of disease biomarkers

The sensor team at the Los Alamos National Laboratory has developed a waveguide-based optical biosensor that has previously been used for the detection of biomarkers associated with diseases such as tuberculosis, breast cancer, anthrax and influenza in complex biological samples (e.g., serum and urine). However, no single biomarker can accurately predict disease. To address this issue, we developed a multiplex assay for the detection of components of the Bacillus anthracis lethal toxin on single mode planar optical waveguides with tunable quantum dots as the fluorescence reporter. This limited ability to multiplex is still insufficient for accurate detection of disease or for monitoring prognosis. In this manuscript, we demonstrate for the first time, the design, fabrication and successful evaluation of a multichannel planar optical waveguide for the simultaneous detection of at least three unknown samples in quadruplicate. We demonstrate the simultaneous, rapid (30 min), quantitative (with internal standard) and sensitive (limit of detection of 1 pM) detection of protective antigen and lethal factor of Bacillus anthracis in complex biological samples (serum) using specific monoclonal antibodies labeled with quantum dots as the fluorescence reporter.

59 BASIC BIOLOGICAL SCIENCES↗