SEARCH · Search NASA

Results for “Practice Guidelines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS2014

Single Event Effects (SEE) Testing: Practical Approach to Test Plans

While standards and guidelines for performing SEE testing have existed for several decades, guidance for developing SEE test plans has not been as easy to find. In this presentation, the variety of areas that need to be considered ranging from resource issues (funds, personnel, schedule) to extremely technical challenges (particle interaction and circuit application), shall be discussed. Note: we consider the approach outlined here as a "living" document: Mission-specific constraints and new technology related issues always need to be taken into account.

Single Event Effects (SEE)↗

NASA NTRS2012

Managing Small Spacecraft Projects: Less is Not Easier

Managing small, low cost missions (class C or D) is not necessarily easier than managing a full flagship mission. Yet, small missions are typically considered easier to manage and used as a training ground for developing the next generation of project managers. While limited resources can be a problem for small missions, in reality most of the issues inherent in managing small projects are not the direct result of limited resources. Instead, problems encountered by managers of small spacecraft missions often derive from 1) the perception that managing small projects is easier if something is easier it needs less rigor and formality in execution, 2) the perception that limited resources necessitate or validate omitting standard management practices, 3) less stringent or unclear guidelines or policies for small projects, and 4) stakeholder expectations that are not consistent with the size and nature of the project. For example, the size of a project is sometimes used to justify not building a full, detailed integrated master schedule. However, while a small schedule slip may not be a problem for a large mission, it can indicate a serious problem for a small mission with a short development phase, highlighting the importance of the schedule for early identification of potential issues. Likewise, stakeholders may accept a higher risk posture early in the definition of a low-cost mission, but as launch approaches this acceptance may change. This presentation discusses these common misconceptions about managing small, low cost missions, the problems that can result, and possible solutions.

Barley, Bryan↗

NASA NTRS1974

Oblique Wing Remotely Piloted Research Aircraft. Volume 1: Development

The NASA Ames/DSI oblique wing remotely piloted research aircraft is a highly unusual, variable remotely piloted vehicle whose configuration and capabilities are the result of certain initial design guidelines that, in terms of conventional aircraft structures and configurations, would be considered to be contradictory and unachievable. Accordingly, the novel design of the yawed wing RPV is at odds in many respects with conventional aircraft practice. Novelty, then, forms the first, unwritten, design guideline. This design is intended to move away from convention in geometry, structure, and materials. The specific guidelines followed in the design of the yawed wing RPV and a short discussion of the impact of each on the configuration of the vehicle are presented.

Source record↗

NASA NTRS1977

Comparison of continuous and discrete adaptive identification algorithms

Discretization of a popular continuous-time control algorithm is effected and an equivalent discrete-time identification law developed and compared to a published discrete identification algorithm developed from Lyapunov Theory. Results are compared as regards asymptotic stability as insured using Lyapunov theory. Some analysis and design guidelines are proposed as regards implementation and practical utility.

Colburn, B. K.↗

NASA NTRS1983

A polytetrafluorethylene insulated cable for high temperature oxygen aerospace applications

For electrical cables to function and survive in the severe high temperature oxygen environment that will be experienced in the external tanks of the space shuttle, extreme cleanliness and material purity is required. A flexible light weight cable has been developed for use in pure oxygen at worst case temperatures of -190 to +260 degrees Centigrade and pressures as high as 44 pounds per square inch absolute. A comprehensive series of tests were performed on cables manufactured to the best commercial practices in order to establish the basic guidelines for control of build configuration as well as each material used in construction of the cable.

Sheppard, A. T.↗

NASA NTRS2000

MEMS Reliability Assurance Activities at JPL

An overview of Microelectromechanical Systems (MEMS) reliability assurance and qualification activities at JPL is presented along with the a discussion of characterization of MEMS structures implemented on single crystal silicon, polycrystalline silicon, CMOS, and LIGA processes. Additionally, common failure modes and mechanisms affecting MEMS structures, including radiation effects, are discussed. Common reliability and qualification practices contained in the MEMS Reliability Assurance Guideline are also presented.

Kayali, S.↗

NASA NTRS2010

Improving Bone-Health Monitoring in Astronauts: Recommended Use of Quantitative Computed Tomography [QCT] for Clinical and Operational Decisions by NASA

DXA measurement of areal bone mineral density [aBMD,g/cm2] is required by NASA for assessing skeletal integrity in astronauts. Due to the abundance of population-based data that correlate hip and spine BMDs to fragility fractures, BMD is widely applied as a predictor of fractures in the general aging population. In contrast, QCT is primarily a research technology that measures three-dimensional , volumetric BMD (vBMD,mg/cm3) of bone and is therefore capable of differentiating between cortical and trabecular components. Additionally, when combined with Finite Element Modeling [FEM], a computational tool, QCT data can be used to estimate the whole bone strength of the hip [FE strength] for a specific load vector. A recent report demonstrated that aBMD failed to correlate with incurred changes in FE strength (for fall and stance loading) by astronauts over typical 180-day ISS (International Space Station) missions. While there are no current guidelines for using QCT data in clinical practice, QCT increases the understanding of how bone structure and mineral content are affected by spaceflight and recovery on Earth. In order to understand/promote/consider the use of QCT, NASA convened a panel of clinicians specializing in osteoporosis. After reviewing the available, albeit limited, medical and research information from long-duration astronauts (e.g., data from DXA, QCT, FEM, biochemistry analyses, medical records and in-flight exercise performance) the panelists were charged with recommending how current and future research data and analyses could inform clinical and operational decisions. The Panel recommended that clinical bone tests on astronauts should include QCT (hip and lumbar spine) for occupational risk surveillance and for the estimation of whole hip bone strength as derived by FEM. FE strength will provide an improved index that NASA could use to select astronauts of optimal bone health for extended duration missions, for repeat missions or for specific mission operations.

Sibonga, J. D.↗

NASA NTRS2022

Quantifying Cybersecurity Risk for NASA Missions

An end-to-end cyber risk assessment process is presented that is based on the combination of guidelines from the National Institute of Standards & Technology (NIST), the standard 5x5 risk matrix, and quantitative methods for generating loss exceedance curves. The NIST guidelines provide a framework for cyber risk assessment, and the standard 5x5 matrix is widely used across the industry for the representation of risk across multiple disciplines. Loss exceedance curves are a means of quantitatively assessing the loss that occurs due to a given risk profile. Combining these different techniques enables us to follow the guidelines, adhere to standard 5x5 risk management practices and develop quantitative metrics simultaneously. Our quantification process is based on the consideration of the NASA and JPL Cost Risk assessment modeling techniques as we define the cost associated with the cybersecurity risk profile of a mission as a function of the mission cost.

Miller, Robert L.↗

NASA NTRS1989

Practices in adequate structural design

An account is given of the guidelines for safe and reliable space vehicle design, especially in the structural engineering area, which have been formulated by NASA in the aftermath of the Space Shuttle Challenger accident in 1986. Illustrative examples are presented from state-of-the-art, performance-driven hardware whose design ineluctably gives rise to a high sensitivity to small variations and uncertainties. It is recommended that such hardware be designed with a view to easy inspectability and manufacturability, with emphasis on the role played in system structures by fracture mechanics. Static and dynamic coupling effects must be precluded wherever possible.

Ryan, Robert S.↗

NASA NTRS2000

Mechanism Design Principle for Optical-Precision, Deployable Instruments

The present paper is intended to be a guide for the design of 'microdynamically quiet' deployment mechanisms for optical-precision structures, such as deployable telescope mirrors and optical benches. Many of the guidelines included herein come directly from the field of optomechanical engineering, and are neither newly developed guidelines nor are they uniquely applicable to high-precision deployment mechanisms. However, the application of these guidelines to the design of deployment mechanisms is a rather new practice, so efforts are made herein to illustrate the process through the discussion of specific examples. The present paper summarizes a more extensive set of design guidelines for optical-precision mechanisms that are under development.

Lake, Mark S.↗

NASA NTRS1971

Recommended safety guides for industrial laboratories and shops

Booklet provides references to 29 publications providing information on hazard control and approved safety practices. Areas include pressurized gas and vacuum systems. Guidelines are presented for safeguarding facilities where machinery, equipment, electrical devices, or hazardous chemicals are used.

Allison, W. W.↗

NASA NTRS2000

Intelligent Tutoring Systems for Procedural Task Training of Remote Payload Operations at NASA

Intelligent Tutoring Systems (ITSs) encode and apply the subject matter and teaching expertise of experienced instructors to provide students with individualized instruction automatically. ITSs complement training simulators by providing automated instruction when it is not economical or feasible to dedicate an instructor to each student during training simulations. Despite their proven training effectiveness and favorable operating cost, however, relatively few ITSs are in use. This is largely because it is usually costly and difficult to encode the task knowledge used by the ITS to evaluate the student's actions and assess the student's performance. Procedural tasks are tasks for which there exist procedures, guidelines, and strategies that determine the correct set of steps to be taken within each situation. To lower the cost and difficulty of creating tutoring systems for procedural task training, Stottler Henke Associates, Inc. (SHAI) worked closely with the Operations Training Group at NASA's Marshall Space Flight Center to develop the Task Tutor Toolkit (T (exp 3)), a generic tutoring system shell and scenario authoring tool. The Task Tutor Toolkit employs a case-based reasoning approach where the instructor creates a procedure template that specifies the range of student actions that are "correct" within each scenario. Because each procedure template is specific to a single scenario, the system can employ relatively simple reasoning methods to represent a correct set of actions and assess student performance. This simplicity enables a non-programmer to specify task knowledge quickly and easily by via graphical user interface, using a "demonstrate, generalize, and annotate" paradigm, that recognizes the range of possible valid actions and infers principles understood (or misunderstood) by the student when those actions are carried out. The Task Tutor Toolkit was also designed to be modular and general, so that it can be interfaced with a wide range of training simulators and support a variety of training domains. SHAI and NASA applied the Task Tutor Toolkit to create the Remote Payload Operations Tutor (RPOT). RPOT is a specific tutoring system application which lets scientists who are new to space mission operations learn to monitor and control their experiments aboard the International Space Station according to NASA payload regulations, guidelines, and procedures. The RPOT simulator lets students practice these skills by monitoring the telemetry variable values of a simple, hypothetical experiment, sending commands to the experiment, coordinating with NASA personnel via voice communication loops, and submitting and retrieving information via documents and forms. At the end of each scenario, RPOT displays the principles correctly or incorrectly demonstrated by the student, along with explanations and background information. The effectiveness of RPOT and the Task Tutor Toolkit are currently under evaluation at NASA.

Ong, James↗

NASA NTRS2001

Guidelines for the Selection of Near-Earth Thermal Environment Parameters for Spacecraft Design

Thermal analysis and design of Earth orbiting systems requires specification of three environmental thermal parameters: the direct solar irradiance, Earth's local albedo, and outgoing longwave radiance (OLR). In the early 1990s data sets from the Earth Radiation Budget Experiment were analyzed on behalf of the Space Station Program to provide an accurate description of these parameters as a function of averaging time along the orbital path. This information, documented in SSP 30425 and, in more generic form in NASA/TM-4527, enabled the specification of the proper thermal parameters for systems of various thermal response time constants. However, working with the engineering community and SSP-30425 and TM-4527 products over a number of years revealed difficulties in interpretation and application of this material. For this reason it was decided to develop this guidelines document to help resolve these issues of practical application. In the process, the data were extensively reprocessed and a new computer code, the Simple Thermal Environment Model (STEM) was developed to simplify the process of selecting the parameters for input into extreme hot and cold thermal analyses and design specifications. In the process, greatly improved values for the cold case OLR values for high inclination orbits were derived. Thermal parameters for satellites in low, medium, and high inclination low-Earth orbit and with various system thermal time constraints are recommended for analysis of extreme hot and cold conditions. Practical information as to the interpretation and application of the information and an introduction to the STEM are included. Complete documentation for STEM is found in the user's manual, in preparation.

Anderson, B. J.↗

NASA NTRS2018

TCL2 National Campaign Human Factors Brief

The Technology Capability Level-2 National Campaign (TCL2nc) was conducted at six different test-sites located across the USA, during May and June of 2017. The campaign resulted in over 240 data collection flights using 24 different aircraft and involving 23 flight crews. Flights not only varied in duration, but also in the environments and terrains over which they flew. The TCL2nc highlighted beyond visual line of sight (BVLOS) and altitude-stratified operations, and saw five partners bring their own, independently built, UAS Service Supplier (USS) for use during the flight tests. This document presents data collected during the TCL2nc that informs the 'Operator' section of the 'Requirements/Best Practices' from the UTM Technical Capability Matrix and Guidelines to Operate (Rios, version as of March 2017). A review of the data collected indicated that although teams were well qualified on paper (in terms of both completing training and having experience with flying UAS vehicles), greater consideration should be given to the unique perspectives and backgrounds of future UAS operators. Overall, teams looked at a variety of sources for information, including USS client-displays, and participants became more mindful of the need to be aware of other vehicles, highlighting the value of reporting information. Observations found that flight crews' time to respond to a UTM issue depended heavily on the team structure, communication efficiency, and crew procedures. These points are discussed in more detail below.

unmanned vehicles↗

NASA NTRS2017

NASA's UTM Research

The Technology Capability Level-2 National Campaign (TCL2nc) was conducted at six different test sites located across the USA, during May and June of 2017. The campaign resulted in over 250 data collection flights using 26 different aircraft and involving 23 flight crews. Flights not only varied in duration, but also in the environments and terrains over which they flew. The TCL2nc highlighted beyond visual line of sight (BVLOS) and altitude-stratified operations, and saw five partners bring their own, independently built, UTM Service Supplier (USS) for use during the flight tests. This document presents data collected during the TCL2nc that informs the 'Operator' section of the 'Requirements/Best Practices' from the UTM Technical Capability Matrix and Guidelines to Operate (Rios, version as of March 2017). A review of the data collected indicated that although teams were well qualified on paper (in terms of both completing training and having experience with flying UAS vehicles), greater consideration should be given to the unique perspectives and backgrounds of future UAS operators. Overall, teams looked at a variety of sources for information, including USS client-displays, and participants became more aware of the need to be aware of other vehicles, highlighting the value of reporting information. Observations found that flight crews' time to respond to a UTM issue depended heavily on the team structure, communication efficiency, and crew procedures.

Mercer, Joey↗

NASA NTRS1980

A study of software management and guidelines for flight projects

A survey of present software development policies and practices, and an analysis of these policies and practices are summarized. Background information necessary to assess the adequacy of present NASA flight software development approaches is presented.

Source record↗

NASA NTRS2018

Information Quality Cluster and Usability

The Information Quality Cluster (IQC) of the Federation of Earth Science Information Partners (ESIP) has been active since 2014 with membership from multiple organizations including NASA and NOAA. The purpose of this presentation is to foster collaboration between the IQC and the ESIP Usability Cluster. The IQC's activities are motivated partly by the guidelines on information quality from several federal agencies. The agencies developed the guidelines complying with a request in 2002 from the Office of Management and Budget (OMB). The OMB request resulted from a congressional mandate, namely, Section 515 of the Treasury and General Government Appropriations Act for Fiscal Year 2001 (Public Law 106-554; H.R. 5658). NASA's guidelines, for example, emphasize the need for high information quality indicating the various types of public users of information from NASA's missions and programs. The IQC's vision is to become an authoritative and responsive resource of information and guidance to data providers on how best to implement data quality standards and best practices, so that the implementations comply with the various agencies' guidelines, as well as provide users with the best quality of information possible. The IQC interacts with various national and international organizations and encourages collaboration for exchange of information. The IQC considers four aspects of information quality: Scientific Quality, Product Quality, Stewardship Quality and Service Quality. The IQC has considered several use cases to identify issues in capturing, describing, providing access to, and enabling use of information on quality. Several of these use cases point to issues about the usability of information. Collaboration between the IQC and Usability Cluster will be beneficial for arriving at solutions to such issues.

Remote Sensing; Data Systems; Information Quality;↗

NASA NTRS1988

Using full-mission simulation for human factors research in air transport operations

This study examined state-of-the-art mission oriented simulation and its use in human factors research. Guidelines were developed for doing full-mission human factors research on crew member behavior during simulated air transport operations. The existing literature was reviewed. However, interviews with experienced investigators provided the most useful information. The fundamental scientific and practical issues of behavioral research in a simulation environment are discussed. Guidelines are presented for planning, scenario development, and the execution of behavioral research using full-mission simulation in the context of air transport flight operations . Research is recommended to enhance the validity and productivity of full-mission research by: (1) validating the need for high-fidelity simulation of all major elements in the operational environment, (2) improving methods for conducting full-mission research, and (3) examining part-task research on specific problems through the use of vehicles which contain higher levels of abstraction (and lower fidelity) of the operational environment.

Orlady, Harry W.↗