Search NASA⌕ Search

SEARCH · Search NASA

Results for “Radioisotope power systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Development of a Multi-bus, Multi-source Reconfigurable Stirling Radioisotope Power System Test Bed

The National Aeronautics and Space Administration (NASA) has typically used Radioisotope Thermoelectric Generators (RTG) as their source of electric power for deep space missions. A more efficient and potentially more cost effective alternative to the RTG, the high efficiency 110 watt Stirling Radioisotope Generator 110 (SRG110) is being developed by the Department of Energy (DOE), Lockheed Martin (LM), Stirling Technology Company (STC) and NASA Glenn Research Center (GRC). The SRG110 consists of two Stirling convertors (Stirling Engine and Linear Alternator) in a dual-opposed configuration, and two General Purpose Heat Source (GPHS) modules. Although Stirling convertors have been successfully operated as a power source for the utility grid and as a stand-alone portable generator, demonstration of the technology required to interconnect two Stirling convertors for a spacecraft power system has not been attempted. NASA GRC is developing a Power System Test Bed (PSTB) to evaluate the performance of a Stirling convertor in an integrated electrical power system application. This paper will describe the status of the PSTB and on-going activities pertaining to the PSTB in the NASA Thermal-Energy Conversion Branch of the Power and On-Board Propulsion Technology Division.

Coleman, Anthony S.↗
NASA NTRSDate not supplied

A Study on Effect of Tuning Capacitor in Dynamic Radioisotope Power Systems

This study presents the effect of tuning capacitors on the power factor and power output of a gas spring-based free-piston Stirling convertor—Advanced Stirling convertor—when the convertor runs on a forced-oscillation type controller. More specifically, this paper studies how off-nominal tuning capacitance values affects the Stirling convertor in terms of the piston stability and electrical power output, when the convertor is operated by forced-oscillation type controller, such as an alternating current bus controller, and operating conditions of the convertor are unchanged. It has been widely known that tuning capacitors are important circuit components to stabilize the piston amplitude of the free-piston Stirling convertors and correct the power factor for high electrical power output. Recent modeling analysis conducted by NASA Glenn Research Center, however, suggests that while the stability of the convertor is affected by the tuning capacitor value, the power factor and the electrical power output are not affected by the tuning capacitor value, as long as the convertor is controlled by a forced-oscillation controller and the convertor operating conditions, such as the hot-end/cold-end temperatures, piston amplitude, and operating frequency, are unchanged. To verify the modeling analysis results, a test setup is devised where the convertor is controlled by a forced-oscillation controller and the piston amplitude, hot-end temperature, and charge pressure are controlled to 4mm, 760˚C, and 485psig, respectively, while the tuning capacitor value is changed from its nominal value, 840μF to 1040μF and 1240μF. Furthermore, the vibration test results of the same convertor with the three tuning capacitor values are also presented in this paper to show the effect of the tuning capacitor value on the convertor stability. The test results suggest that when the convertor is controlled by a forced-oscillation, the tuning capacitor value determines the convertor stability but not the power factor nor electrical power output. Therefore, the tuning capacitance value in forced-oscillation controllers should be determined based on the convertor stability, system mass, and volume.

Free-Piston Stirling Convertor Controller↗
NASA NTRS2006

A conceptual Saturn ring observer mission using standard radioisotope power systems

Saturn remains of the most fascinating planets within the solar system. To better understand the complex ring structure of this planet, a conceptual Saturn Ring Observer (SRO) mission is presented that would spend one year in close proximity to Saturn's A and B rings, and perform detailed observations and measurements of the ring particles and electric and magnetic fields.

Saturn rings↗
NASA NTRS2006

A Conceptual Titan Orbiter Mission Using Advanced Radioisotope Power Systems

This study details a conceptual follow-on Titan orbiter mission that would provide full global topographic coverage. surface imaging, and meteorological characterization of the atmosphere over a nominal 5-year science mission duration. The baseline power requirement is approx.1 kWe at EOM and is driven by a high power radar instrument that would provide 3-dimensional measurements of atmospheric clouds, precipitation, and surface topography. While this power level is moderately higher than that of the Cassini spacecraft. higher efficiency advanced RPSs could potentially reduce the plutonium usage to less than 1/3rd of that used on the Cassini spacecraft. The Titan Orbiter mission is assumed to launch in 2015. It would utilize advanced RPSs to provide all on-board power.

radioisotope power systems (RPS)↗
NASA NTRSDate not supplied

A Study on Effect of Tuning Capacitor in Dynamic Radioisotope Power Systems

This study presents the effect of the tuning capacitor on the stability and electrical power output of a gas spring-based free-piston Stirling convertor (FPSC) when the FPSC runs on a forced-oscillation type controller. It has been widely accepted that the tuning capacitor is an important circuit component of the FPSC to stabilize piston amplitude and maximize electrical power output by correcting the power factor. Recent modeling analysis, however, suggests that while the effect on the stability is significant, the effect on the electrical power output is almost negligible as long as the operating frequency the FPSC is fixed by a forced-oscillation controller and operating conditions, such as the hot-end/cold-end temperatures, piston amplitude, and pressure, are unchanged. To verify the modeling analysis results, Advanced Stirling Convertor (ASC) is controlled by an AC power supply and the piston amplitude, hot-end temperature, cold-end temperature, and pressure are actively controlled to 4.3mm, 760˚C, 40˚C and 485psig, respectively, while the tuning capacitor value is changed from 840μF to 1040μF and 1240μF. Furthermore, the vibration test results of the ASC with the three tuning capacitor values are also presented to show the effect of the tuning capacitor on stability. The test results suggest that when the FPSC operates at a fixed frequency, the effect of tuning capacitor on electrical power output is negligible while the effect on stability is rather significant. Therefore, the tuning capacitor value should be selected toward the highest stability.

Free-Piston Stirling Convertor Controller↗
NASA NTRSDate not supplied

A Study on Effect of Tuning Capacitor in Dynamic Radioisotope Power Systems

This study presents the effect of the tuning capacitor on stability and electrical power output of a gas-bearing based free-piston Stirling convertor (FPSC) when operating on a fixed-frequency type controller. It has been widely accepted that the tuning capacitor is an important circuit component of the FPSC to stabilize piston amplitude and maximize electrical power output by correcting the power factor. Models suggest the stability of the FPSC is strongly coupled to the tuning capacitance, while the coupling to the electrical power output is weak. This applies to cases where the operating frequency of the FPSC is fixed by a fixed-frequency controller and other operating conditions, such as the hot-end and cold-end temperatures, piston amplitude, and pressure are constant. To verify the modeling analysis results, an Advanced Stirling Convertor (ASC) was controlled by an AC power supply and the piston amplitude, hot-end temperature, cold-end temperature, and pressure are actively controlled to 4.3mm, 760˚C, 40˚C and 485psig, respectively, while the tuning capacitor value was changed from 840μF to 1040μF and 1240μF. Furthermore, the vibration test results of the ASC with different tuning capacitor values are also presented to show the effect of the tuning capacitor on stability. The experimental test results verified that the effect of tuning capacitor on electrical power output is negligible while the effect on stability is rather noticeable. Therefore, the ideal tuning capacitor value should be selected based on required stability of the FPSC.

Free-Piston Stirling Convertor Controller↗
NASA NTRS1994

Monte Carlo Radiation Analysis of a Spacecraft Radioisotope Power System

A Monte Carlo statistical computer analysis was used to create neutron and photon radiation predictions for the General Purpose Heat Source Radioisotope Thermoelectric Generator (GPHS RTG). The GPHS RTG is being used on several NASA planetary missions. Analytical results were validated using measured health physics data.

planetary missions spacecraft electrical power out↗
NASA NTRSDate not supplied

A Comparison of Radioisotope and Solar Array/Battery Power Systems in the Solar System

Radioisotope Power Systems (RPS) are an invaluable resource for the exploration of our solar system. Providing both heat and electricity, spacecraft using RPS can operate where its impractical to use solar array and/or battery systems because of either limited solar illumination or mission durations which make a standalone battery impractical. This paper highlights the performance advantages which may come from using a RPS compared with a solar array/battery system. Included in this paper is an overview of the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG), the Next-Generation RTG (NGRTG) and Dynamic Radioisotope System (DRPS). State-the-Art (SOA) performance of solar arrays and batteries is discussed. Finally, a comparison of both solar cell/battery systems compare with RPS are made at a variety of locations, both orbital and on the surface of some planets and their moons within our solar system.

Paul C Schmitz↗
NASA NTRSDate not supplied

A Comparison of Radioisotope and Solar Array/Battery Power Systems in the Solar System

Radioisotope Power Systems (RPS) are an invaluable resource for the exploration of our solar system. Providing both heat and electricity, spacecraft using RPS can operate where its impractical to use solar array and/or battery systems because of either limited solar illumination or mission durations which make a standalone battery impractical. This paper highlights the performance advantages which may come from using a RPS compared with a solar array/battery system. Included in this paper is an overview of the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG), the Next-Generation RTG (NGRTG) and Dynamic Radioisotope System (DRPS). State-the-Art (SOA) performance of solar arrays and batteries is discussed. Finally, a comparison of both solar cell/battery systems compare with RPS are made at a variety of locations, both orbital and on the surface of some planets and their moons within our solar system.

Paul C Schmitz↗
NASA NTRSDate not supplied

A Comparison of Radioisotope and Solar Array/Battery Power Systems in the Solar System

Radioisotope Power Systems (RPS) are an invaluable resource for the exploration of our solar system. Providing both heat and electricity, spacecraft using RPS can operate where its impractical to use solar array and/or battery systems because of either limited solar illumination or mission durations which make a standalone battery impractical. This paper highlights the performance advantages which may come from using a RPS compared with a solar array/battery system. Included in this paper is an overview of the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG), the Next-Generation RTG (NGRTG) and Dynamic Radioisotope System (DRPS). State-the-Art (SOA) performance of solar arrays and batteries is discussed. Finally, a comparison of both solar cell/battery systems compare with RPS are made at a variety of locations, both orbital and on the surface of some planets and their moons within our solar system.

Paul Schmitz↗
NASA NTRS2018

Radioisotope Power Systems to Enable Extended Lunar Science and In-Situ Resource Utilization Missions

The Moon's surface environment offers a significant challenge for most space systems and, particularly, for power technologies. First, the Moon's rotational synodic period is 27.3 days long because it is tidally-locked with Earth and thus matches its orbital period. However, for a point on the lunar surface with respect to the Sun returning to the same position in the sky, called a synodic day, is 29.5 days or 708 hours. Therefore, a lunar day is 354 hours of sunlight and 354 hours of darkness. Equatorial diurnal temperatures range from about 400K at noon to 100K during the night. Within craters and permanently shadowed regions (PSRs) temperatures can be a constant 40K or below. Sunlight in the lunar polar regions can range from total darkness in deep polar craters and at higher elevations, potentially nearly continuous conditions are possible. However local topographical features such as outcrops or more distant mountains and ridges would obscure the Sun even in these extended sunlit areas and thus create intermittent shadowed periods depending on seasonally varying Sun angle and the obscuring topographical features. Thus, the power system technology that a mission selects becomes a critical trade.

radioisotope↗
NASA NTRS2008

Extended Operation Testing of Stirling Convertors in Support of Stirling Radioisotope Power System Development

100 We class Stirling convertors began extended operation testing at NASA Glenn Research Center (GRC) in 2003 with a pair of Technology Demonstration Convertors (TDCs) operating in air. Currently, the number of convertors on extended operation test has grown to 12, including both TDCs and Advanced Stirling Convertors (ASCs) operating both in air and in thermal vacuum. Additional convertors and an electrically heated radioisotope generator will be put on test in the near future. This testing has provided data to support life and reliability estimates and the quality improvements and design changes that have been made to the convertor. The convertors operated 24/7 at the nominal amplitude and power levels. Performance data were recorded on an hourly basis. Techniques to monitor the convertors for change in internal operation included gas analysis, vibration measurements and acoustic emission measurements. This data provided a baseline for future comparison. This paper summarizes the results of over 145,000 hours of TDC testing and 40,000 hours of ASC testing and discusses trends in the data. Data shows the importance of improved materials, hermetic sealing, and quality processes in maintaining convertor performance over long life.

Lewandowski, Edward J.↗
NASA NTRS2009

Extended Operation Testing of Stirling Convertors in Support of Stirling Radioisotope Power System Development

100 We class Stirling convertors began extended operation testing at NASA Glenn Research Center (GRC) in 2003 with a pair of Technology Demonstration Convertors (TDCs) operating in air. Currently, the number of convertors on extended operation test has grown to 12, including both TDCs and Advanced Stirling Convertors (ASCs) operating both in air and in thermal vacuum. Additional convertors and an electrically heated radioisotope generator will be put on test in the near future. This testing has provided data to support life and reliability estimates and the quality improvements and design changes that have been made to the convertor. The convertors operated 24/7 at the nominal amplitude and power levels. Performance data were recorded on an hourly basis. Techniques to monitor the convertors for change in internal operation included gas analysis, vibration measurements, and acoustic emission measurements. This data provided a baseline for future comparison. This paper summarizes the results of over 145,000 hr of TDC testing and 40,000 hr of ASC testing and discusses trends in the data. Data shows the importance of improved materials, hermetic sealing, and quality processes in maintaining convertor performance over long life.

Lewandowski, Edward J.↗