Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stand”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Standing waves at low Mach number laminar bow shocks

Explorer 43 data were used to study 34 bow shock crossings observed from 5 to 16 earth radii upstream of the average bow shock location. Waves with periods of 6 to 130 s having amplitudes up to delta-B/B = 1 were detected. Wave polarization for the low-frequency waves is right-handed in relation to the average field direction when the observer moves from the upstream to downstream direction but is left-handed when the observer moves in the opposite sense. This fact identified the waves as standing whistler waves in the coordinate system of the shock. The waves are in agreement with collisionless low Mach number laminar shock theory. When the measured parameters were used to calculate theoretical wavelengths, the observed wave frequencies could be used to calculate velocities for the shock-wave coordinate system past the spacecraft; such velocities are mostly between 10 and 30 km/s. It is suggested that the higher-frequency propagating whistler waves may evolve from the standing whistler waves through a decay instability.

Fairfield, D. H.↗
NASA NTRS1975

Variations in the solar wind stand-off distance at Mercury

The intrinsic dipole model of the magnetosphere of Mercury is combined with statistics on the solar wind dynamic pressure from Explorers 33 and 35 to obtain histograms of the solar wind stand-off distance for aphelion, perihelion and median distance of Mercury from the sun. The results show that even at perihelion the stand-off distance lies above the surface the great majority of the time. On rare occasions, direct impact of the solar wind onto the surface will occur.

Siscoe, G.↗
NASA NTRS1975

Comparison of 70 deg tilt, LBNP, and passive standing as measures of orthostatic tolerance

The present study was performed to assess the reliability of lower body negative pressure (LBNP) as a test of orthostatic tolerance. The need for this assessment arose from the prior observation in this laboratory that some subjects show wide day-to-day variation in heart rate responses to LBNP. The extent of these variations was so great as to raise a serious question as to the value of LBNP as a measure of study-induced alterations (e.g., those produced by bedrest or weightlessness) in orthostatic tolerance. Five healthy volunteers were subjected to a series of tests, consisting of 70 deg tilt, LBNP, and passive standing, on three occasions preceding and three occasions following a 2-week period of bedrest. Study results show that it is possible to subdivide the volunteers into subgroups which show either great or little day-to-day variability in any of the three tests. All three tests revealed bedrest-induced alterations in orthostatic tolerance quite adequately. Of the three tests studied, LBNP most frequently resulted in the largest test-induced heart rate alterations, followed by quiet standing and, finally 70 deg tilt.

Hyatt, K. H.↗
NASA NTRS1975

A new image enhancement algorithm with applications to forestry stand mapping

The author has identified the following significant results. Results show that the new algorithm produced cleaner classification maps in which holes of small predesignated sizes were eliminated and significant boundary information was preserved. These cleaner post-processed maps better resemble true life timber stand maps and are thus more usable products than the pre-post-processing ones: Compared to an accepted neighbor-checking post-processing technique, the new algorithm is more appropriate for timber stand mapping.

Kan, E. P. F.↗
NASA NTRS1979

Effects of refraction by means flow velocity gradients on the standing wave pattern in three-dimensional, rectangular waveguides

The influence of a mean vortical flow on the connection between the standing wave pattern in a rectangular three dimensional waveguide and the corresponding duct axial impedance was determined analytically. The solution was derived using a perturbation scheme valid for low mean flow Mach numbers and plane wave sound frequencies. The results show that deviations of the standing wave pattern due to refraction by the mean flow gradients are small.

Hersh, A. S.↗
NASA NTRS1980

A design assessment of multiwall, metallic stand-off, and RSI reusable thermal protection systems including space shuttle application

The design and assessment of reusable surface insulation (RSI), metallic stand off and multiwall thermal protection systems (TPS) is discussed. Multiwall TPS is described in some detail, and analyses useful for design of multiwall are included. Results indicate that multiwall has the potential to satisfy the TPS design goals better than the other systems. The total mass of the stand-off TPS and of the metallic systems require less primary structure mass than the RSI system, since the nonbuckling skin criteria required for RSI may be removed. Continued development of multiwall TPS is required to verify its potential and to provide the necessary data base for design.

Jackson, L. R.↗
NASA NTRS1981

International market assessment of stand-alone photovoltaic power systems for cottage industry applications

The final result of an international assessment of the market for stand-alone photovoltaic systems in cottage industry applications is reported. Nonindustrialized countries without centrally planned economies were considered. Cottage industries were defined as small rural manufacturers, employing less than 50 people, producing consumer and simple products. The data to support this analysis were obtained from secondary and expert sources in the U.S. and in-country field investigations of the Philippines and Mexico. The near-term market for photovoltaics for rural cottage industry applications appears to be limited to demonstration projects and pilot programs, based on an in-depth study of the nature of cottage industry, its role in the rural economy, the electric energy requirements of cottage industry, and a financial analysis of stand-alone photovoltaic systems as compared to their most viable competitor, diesel driven generators. Photovoltaics are shown to be a better long-term option only for very low power requirements. Some of these uses would include clay mixers, grinders, centrifuges, lathes, power saws and lighting of a workshop.

Philippi, T. M.↗
NASA NTRS1981

Standing waves observed at the dayside magnetopause

Energetic (greater than 24 keV) ion distributions are used in remotely sounding an ion trapping boundary at the dayside magnetopause for two inbound crossings of ISEE-2 on days 347 and 312, 1977, at 0830 and 1100 LT. Applying single particle trajectory models to the observed temporal relationships between trapping boundary distance and orientation parameters, it is concluded that longitudinal standing waves occur on the boundary, having typical wavelengths of 1500-3000 km, amplitudes of 500 km, and periods of 200-400 sec. The standing wave nodes move along the node axis with velocities ranging from 1.5 to 6 km/sec. The data are found to be inconsistent with models of traveling waves moving tailward along the boundary.

Fahnenstiel, S. C.↗
NASA NTRS1982

Standing hydromagnetic waves observed by ISEE 1 and 2 - Radial extent and harmonic

Direct measurements of the spatial extent of the resonant hydromagnetic waves associated with Pc 4 and 5 magnetic pulsations made by the closely spaced ISEE 1 and 2 satellites are presented together with ISEE 1 determinations of the harmonic of the resonant waves. The use of two satellites in similar orbits, which makes it possible to distinguish between spatial and temporal features, has shown the resonant region widths to extend over about 0.2 to 1.6 L shells for three events detected on the dayside between L = 4 and L = 7. The two events for which plasma density data was available occurred at plasma density gradients in the vicinity of the plasmapause. The standing wave harmonic was determined by the combination of two techniques: the comparison of the observed wave period with that predicted by standing wave theory, and the comparison of the phases of the observed wave electric and magnetic field. The two events analyzed are found to be second harmonic oscillations, suggesting internal generation in the magnetosphere by a bounce resonant mechanism.

Singer, H. J.↗
NASA NTRS1983

Modular photovoltaic stand-alone systems: Phase 1

A family of modular stand-alone power systems that covered the range in power level from 1 kw to 14 kw was developed. Products within this family were required to be easily adaptable to different environments and applications, and were to be both reliable and cost effective. Additionally, true commonality in hardware was to be exploited, and unnecessary recurrence of design and development costs were to be minimized; thus improving hardware availability. Assurance of compatibility with large production runs, was also an underlying program goal. A secondary objective was to compile, evaluate, and determine the economic and technical status of available, and potentially available, technology options associated with the balance of systems (BOS) for stand-along photovoltaic (PV) power systems. The secondary objective not only directly supported the primary but additionally contributed to the definition and implementation of the BOS cost reduction plan.

Naff, G. J.↗
NASA NTRS1984

Stand-alone flat-plate photovoltaic power systems: System sizing and life-cycle costing methodology for Federal agencies

A simple methodology to estimate photovoltaic system size and life-cycle costs in stand-alone applications is presented. It is designed to assist engineers at Government agencies in determining the feasibility of using small stand-alone photovoltaic systems to supply ac or dc power to the load. Photovoltaic system design considerations are presented as well as the equations for sizing the flat-plate array and the battery storage to meet the required load. Cost effectiveness of a candidate photovoltaic system is based on comparison with the life-cycle cost of alternative systems. Examples of alternative systems addressed are batteries, diesel generators, the utility grid, and other renewable energy systems.

Borden, C. S.↗
NASA NTRS1984

Digital data-acquisition system for measuring the free decay of acoustical standing waves in a resonant tube

A low-cost digital system based on an 8-bit Apple II microcomputer has been designed to provide on-line control, data acquisition, and evaluation of sound absorption measurements in gases. The measurements are conducted in a resonant tube, in which an acoustical standing wave is excited, the excitation removed, and the sound absorption evaluated from the free decay envelope. The free decay is initiated from the computer keyboard after the standing wave is established, and the microphone response signal is the source of the analog signal for the A/D converter. The acquisition software is written in ASSEMBLY language and the evaluation software in BASIC. This paper describes the acoustical measurement, hardware, software, and system performance and presents measurements of sound absorption in air as an example.

Meredith, R. W.↗
NASA NTRS1984

Free-standing thin film Ge single crystals grown by plasma-enhanced chemical vapor deposition

The films, which are approximately 10 microns in thickness, are grown epitaxially on polished (100) NaCl substrates at 450 C by plasma enhanced chemical vapor deposition. Upon cooling, the films are separated from the substrate by differential shear stress, leaving free-standing films of Ge which can be handled. Growths are attained by nucleating at minimum plasma power for very brief intervals and then raising the power to 65 W to increase the growth rate to approximately 10 microns/h. It is found that substrate exposure to the plasma at too high a power for too long a time sputters and erodes the surface, thereby substantially degrading the nucleation process and the ultimate growths. It is noted that the free-standing films are visually specular and exhibit a high degree of crystalline order when examined by X-ray diffraction. Auger electron spectroscopy and energy dispersive analysis of X-rays reveal no detectable bulk contamination.

Outlaw, R. A.↗
NASA NTRS1984

Temporal evolution of the solar wind and the formation of a standing shock

The temporal evolution of the solar wind from one steady state to another is explored when momentum deposition produces multiple critical points in the flow. It is shown that the wind always evolves in time to a new steady state compatible with the solution of the steady state equation of motion. However, for the same initial state and identical asymptotic momentum deposition rate, the temporal evolution pattern of the wind depends on the detailed time history of momentum addition and is therefore not unique. This feature plays an important role in the particular case when multiple (three in this study) steady states exist for identical boundary conditions; each one of these solutions is thus shown to be physically accessible. The details of the temporal evolution pattern of the wind reveal the formation of a shock discontinuity whenever the flow becomes supersonic at a critical point upstream from the initial critical point. If the flow remains supersonic at that inner critical point, the shock can become a standing one, depending on the strength and the temporal history of momentum addition. The results of this study indicate that the time scale required for the solar wind to evolve between steady states is of the order of 30-60 hours. Furthermore, the results also reveal the interesting and novel phenomenon that a standing shock is likely to develop in the inner solar wind flow within this time frame, in particular, in coronal hole regions with rapidly diverging geometries.

Habbal, S. R.↗
NASA NTRS1985

Acoustic radiation potential on a sphere in plane, cylindrical, and spherical standing wave fields

The method of Gor'kov is applied for deriving the acoustic radiation potential on a sphere in an arbitrary sound field. Generalized potential and force expressions are derived for arbitrary standing wave modes in rectangular, cylindrical, and spherical geometries for the case where the sphere radius is much smaller than the wavelength. Criteria for determining radiation-potential minima are derived and examples of characteristic spatial radiation-potential profiles are presented. Single modes that can sustain stable positioning are discussed for each geometry. The localizing force strengths for representative standing wave modes in the three geometries are also compared. The positioning of samples due to acoustic forces only are considered. However, the method developed is general and is extended to include gravity or other external forces.

Barmatz, M.↗
NASA NTRS1985

An analysis of cross-coupling of a multicomponent jet engine test stand using finite element modeling techniques

A two axis thrust measuring system was analyzed by using a finite a element computer program to determine the sensitivities of the thrust vectoring nozzle system to misalignment of the load cells and applied loads, and the stiffness of the structural members. Three models were evaluated: (1) the basic measuring element and its internal calibration load cells; (2) the basic measuring element and its external load calibration equipment; and (3) the basic measuring element, external calibration load frame and the altitude facility support structure. Alignment of calibration loads was the greatest source of error for multiaxis thrust measuring systems. Uniform increases or decreases in stiffness of the members, which might be caused by the selection of the materials, have little effect on the accuracy of the measurements. It is found that the POLO-FINITE program is a viable tool for designing and analyzing multiaxis thrust measurement systems. The response of the test stand to step inputs that might be encountered with thrust vectoring tests was determined. The dynamic analysis show a potential problem for measuring the dynamic response characteristics of thrust vectoring systems because of the inherently light damping of the test stand.

Schweikhard, W. G.↗
NASA NTRS1986

Evaluation of the airborne imaging spectrometer for remote sensing of forest stand conditions

Five pairs of plots were established in forest stands with one of each pair trenched and covered to prevent precipitation from reaching the tree roots. High winds and falling limbs destroyed the covers on three of the plots. The two remaining plots were in a red pine plantation and in a natural stand of sugar maple. Trees in both plots developed levels of moisture stress more than nine bars higher than control trees on the dates of overflights with the Airborne Imaging Spectrometer (AIS) and the Collins' Airborne Spectroradiometer (CAS). Hemispherical reflectance from stressed and control trees was measured with a Beckman DK2A spectrophotometer. On the day of the AIS overflight, stressed maple foliage was less reflective than the control from 1000 to 1300 nm, but more reflective at wavelengths longer than 1300 nm. Pine foliage was less reflective than the control from 1000 to 1600 nm, but the difference was small at wavelengths longer than 1350 nm. AIS data collected showed brightness values for both maple and pine to be lower than for the controls from 1000 to 1300 nm. CAS data were used to determine the gain in species identification accuracy obtainable with high spectral resolution data.

Olson, Charles E., Jr.↗
NASA NTRS1986

Electric and magnetic observations of the structure of standing waves in the magnetosphere

Electric and magnetic field instruments on the DE 1 spacecraft provided observations of toroidal standing wave oscillations of magnetic shells in 1981 and 1982. The amplitude and nodal structure of these waves, as a function of increasing magnetic latitude, was studied and compared with model calculations of these waves. Eight pulsation events were selected for study. The pulsations in these events ranged in period from 20 to 300 s. They were observed at L values between 2.8 and 9.7 and at magnetic latitudes from the equator to 48 deg. The duration of these pulsation events was 20 to 30 min, and they usually consisted of a 5- to 10-min growth in amplitude, a 5- to 10-min interval of fluctuating amplitude, and a 5- to 20-min interval of decreasing amplitude. The relative E and B amplitudes and the phase relations between the E and B waves could be qualitatively explained by the nodal structure of the waves predicted by model calculations. Detailed quantitative comparisons of E and B amplitudes were in agreement with more recent model calculations. In a few cases, electron densities were also available as derived from plasma frequency observations; in these cases the standing wave periods calculated were reasonably close to, but somewhat less than, the observed periods.

Cahill, L. J., Jr.↗