SEARCH · Search NASA

Results for “acetate concentration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1998

Tetragonal Chicken Egg White Lysozyme Solubility in Sodium Chloride Solutions

The solubility of chicken egg white lysozyme, crystallized in the tetragonal form was measured in sodium chloride solutions from 1.6 to 30.7 C, using a miniature column solubility apparatus. Sodium chloride solution concentrations ranged from 1 to 7% (w/v). The solutions were buffered with 0.1 M sodium acetate buffer with the solubility being measured at pH values in 0.2 pH unit increments in the range pH 4.0 to 5.4, with data also included at pH 4.5. Lysozyme solubility was found to increase with increases in temperature and decreasing salt concentration. Solution pH has a varied and unpredictable effect on solubility.

Forsythe, Elizabeth L.↗

DOE OSTI2022

Effect of Carboxylic Acids on Corrosion of Type 410 Stainless Steel in Pyrolysis Bio-Oil

Biomass-derived oils are renewable fuel sources and commodity products and are proposed to partially or entirely replace fossil fuels in sectors generally considered difficult to decarbonize such as aviation and maritime propulsion. Bio-oils contain a range of organic compounds with varying functional groups which can lead to polarity-driven phase separation and corrosion of containment materials during processing and storage. Polar compounds, such as organic acids and other oxygenates, are abundant in bio-oils and are considered corrosive to structural alloys, particularly to those with a low-Cr content. To study the corrosion effects of small carboxylic acids present in pyrolysis bio-oils, type 410 stainless steel (SS410) specimens were exposed in bio-oils with varying formic, acetic, propionic and hexanoic acid contents at 50 °C during 48 h exposures. The specific mass change data show a linear increase in mass loss with increasing formic acid concentration. Interestingly, a mild corrosion inhibition effect on the corrosion of SS410 specimens was observed with the addition of acetic, propionic and hexanoic acids in the bio-oil.

09 BIOMASS FUELS↗

DOE OSTI2021

Representing methane emissions from wet tropical forest soils using microbial functional groups constrained by soil diffusivity

Tropical ecosystems contribute significantly to global emissions of methane (CH 4 ), and landscape topography influences the rate of CH 4 emissions from wet tropical forest soils. However, extreme events such as drought can alter normal topographic patterns of emissions. Here we explain the dynamics of CH 4 emissions during normal and drought conditions across a catena in the Luquillo Experimental Forest, Puerto Rico. Valley soils served as the major source of CH 4 emissions in a normal precipitation year (2016), but drought recovery in 2015 resulted in dramatic pulses in CH 4 emissions from all topographic positions. Geochemical parameters including (i) dissolved organic carbon (C), acetate, and soil pH and (ii) hydrological parameters like soil moisture and oxygen (O 2 ) concentrations varied across the catena. During the drought, soil moisture decreased in the slope and ridge, and O 2 concentrations increased in the valley. We simulated the dynamics of CH 4 emissions with the Microbial Model for Methane Dynamics-Dual Arrhenius and Michaelis–Menten (M3D-DAMM), which couples a microbial functional group CH 4 model with a diffusivity module for solute and gas transport within soil microsites. Contrasting patterns of soil moisture, O 2 , acetate, and associated changes in soil pH with topography regulated simulated CH 4 emissions, but emissions were also altered by rate-limited diffusion in soil microsites. Changes in simulated available substrate for CH 4 production (acetate, CO 2 , and H 2 ) and oxidation (O 2 and CH 4 ) increased the predicted biomass of methanotrophs during the drought event and methanogens during drought recovery, which in turn affected net emissions of CH 4 . A variance-based sensitivity analysis suggested that parameters related to aceticlastic methanogenesis and methanotrophy were most critical to simulate net CH 4 emissions. This study enhanced the predictive capability for CH 4 emissions associated with complex topography and drought in wet tropical forest soils.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

divergence in basal transcriptomes of "Wild Type" Chlamydomonas reinhardtii strains

This is a study to compare the basal transcriptomes of several widely used laboratory strains of the Chlorophyte alga, Chlamydomonas reinhardtii. Given that there is a high degree of genetic diversity among the closely-related laboratory strains, we wished to examine how much variation there is at the transcriptome level. A panel of WT strains (CC-124, CC-125, CC-1009, CC-1690, CC-1691), all believed to be descended from a single zygospore isolated in 1945, were chosen based on their representing the oldest lineages among the standard laboratory strains. Additionally, CC-4532, which was the source for the current (v6) reference assembly, and CC-4533, which is the initial parental strain of the CLiP library collection of mutant strains, were also included in this study based on their significance to the Chlamydomonas community. All strains were grown in liquid cultures under identical, mixotrophic conditions (light + acetate) to mid-log phase before collecting mRNA for RNA-Seq analysis. Overall design: Pre-cultures of each strain (CC-124, CC-125, CC-1009, CC-1690, CC-1691, CC-4532, and CC-4533) were used to innoculate flasks of Tris-Acetate-Phosphate (TAP) media supplemented with Kropat's trace metals at a concentration of 1.5 x 10^4 cells/mL. Flasks were placed on a shaking platform at 180 RPM under 50-70 µmol x m^-2 x s^-1 of light. Cultures were grown until they reached ~2-3 x 10^6 cells/mL, about three days, before total RNA was collected and subjected RNA-Seq analysis.

Source record↗

DOE OSTI2022

Effects of Borate and Organics on U(VI) Solubility in WIPP Brine

The solubility of uranium (VI) in Waste Isolation Pilot Plant (WIPP)-relevant brine was determined to support ongoing WIPP recertification activities. This research was performed by the Los Alamos National Laboratory Carlsbad Operations (LANL-CO) Actinide Chemistry and Repository Science Program (ACRSP). The WIPP Actinide Source Term Program (ASTP) did not develop a model for the solubility of actinides in the VI oxidation state. The solubility of UO 2 2+ , in the absence of WIPP specific data, is presently set to be equal to a conservatively high 1 mM within the WIPP Performance Assessment (PA) for all expected WIPP conditions (SOTERM, 2019) as selected at the recommendation of the Environment Protection Agency (EPA) (EPA, 2005). According to the current WIPP chemistry model assumptions and conditions, the expected pC H+ is about 9.5 and controlled by MgO buffering CO 3 2- . The goal of this study is to perform screening experiments that account for the contributions of organics and borate on uranium solubility. In this report, the solubility of U(VI) was determined at pC H+ 9 WIPP brine in the absence or presence of borate and organics at under-saturation approach. Experiments were equilibrated for about 135 days. Organic compounds present in WIPP waste can form strong complexes with actinides and can affect the oxidation states of actinides. The organic compounds addressed in WIPP performance assessment include EDTA (Ethylenediaminetetraacetic Acid), oxalate, citrate, and acetate (SOTERM, 2019). These data quantify the effects of WIPP-relevant concentrations of borate and organics effects on the solubility of U(VI) to challenge the predictions of the WIPP actinide model and inform decisions and recommendations made in the upcoming recertification of the WIPP (CRA-2024). The experiments performed were done according to the U.S. Department of Energy (DOE) approved Test Plan entitled “Experimental Strategy to Challenge Actinide Solubility Predictions” and designated LCO-ACP-26. All data reported were obtained under the LANL-CO Quality Assurance Program, which is compliant with the DOE Carlsbad Field Office, Quality Assurance Program Document (CBFO/QAPD) (QAPD, 2017).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2011

Method and Apparatus for Forming Nanodroplets

This innovation uses partially miscible fluids to form nano- and microdroplets in a microfluidic droplet generator system. Droplet generators fabricated in PDMS (polydimethylsiloxane) are currently being used to fabricate engineered nanoparticles and microparticles. These droplet generators were first demonstrated in a T-junction configuration, followed by a cross-flow configuration. All of these generating devices have used immiscible fluids, such as oil and water. This immiscible fluid system can produce mono-dispersed distributions of droplets and articles with sizes ranging from a few hundred nanometers to a few hundred microns. For applications such as drug delivery, the ability to encapsulate aqueous solutions of drugs within particles formed from the droplets is desirable. Of particular interest are non-polar solvents that can dissolve lipids for the formation of liposomes in the droplet generators. Such fluids include ether, cyclohexane, butanol, and ethyl acetate. Ethyl acetate is of particular interest for two reasons. It is relatively nontoxic and it is formed from ether and acetic acid, and maybe broken down into its constituents at relatively low concentrations.

Ackley, Donald↗

DOE OSTI2023

Characterizing and Engineering Trehalose Biosynthesis Pathways to Improve Acetate Tolerance in Pseudomonas putida KT2440

Alkaline pretreatment can depolymerize lignin into a diverse mixture of monomers and smaller compounds, enabling bioconversion of these compounds to value-added chemicals in engineered bacterial hosts such as Pseudomonas putida KT2440. Acetate and salts comprise approximately 8% and 32% of the lignin stream, respectively. High concentrations of these components can cause cell death in P. putida, so lignin-derived streams must be fed in lower amounts to decrease stress. Investigation of the mechanisms of bacterial tolerance to chemicals in lignin-rich substrates is therefore required to overcome this obstacle in lignin bioconversion. Previous work has shown that trehalose, an endogenously produced disaccharide, is involved in tolerance to heat, cold, and osmotic stress, as well as implicated in acid stress in other bacteria. As such, trehalose biosynthesis presents a useful target to increase acetate and osmotic tolerance in P. putida. This work investigates the native TreSA, TreSB, and TreY/TreZ trehalose biosynthesis pathways in this bacterial strain as well as the OtsAB pathway of Sphingobium sp. SYK-6. Overexpression of the OtsAB pathway in P. putida increased tolerance to acetate relative to wild-type. Additionally, functional knockouts of treSA, treSB, treY, and treZ in P. putida showed that interruption of any trehalose biosynthesis pathway, and, in the case of TreY/TreZ, interruption of the pathway at any point, significantly hindered growth in acetate as well as on glucose and LB broth. Each trehalose biosynthesis pathway was then engineered for overexpression in P. putida to determine whether overexpression of these genes conferred additional tolerance to acetate. The TreSA, TreSB, OtsA, and OtsB enzymes were also expressed and purified to determine the reaction rates and kinetics of these pathways. The hypothetical glycoside hydrolase family 15 protein, encoded in the gene located in between otsB and otsA in the Sphingobium operon, was purified as well to investigate its potential involvement in the OtsAB pathway. The findings of this work illuminated the mechanisms of trehalose biosynthesis in P. putida and identified genetic targets to improve strain tolerance to common components of alkaline-pretreated lignin streams. These findings could ultimately improve yields of desired products from lignin in engineered strains of P. putida.

alkaline pretreatment↗

NASA NTRS1999

Buffer Effects in the Solubility, Nucleation and Growth of Chicken Egg White Lysozyme

The growth of protein crystals is important for determination of their three-dimensional structure, which relates to their biochemical functions and to the practical goal of designing pharmaceuticals to modify that function. While many proteins have been successfully crystallized by a variety of methods, there is still limited understanding of the process of nucleation and growth of even the simplest proteins. Chicken egg-white lysozyme (CEWL) is readily crystallized under a variety of conditions, and studies underway at MSFC are designed to elucidate the mechanisms by which the crystals nucleate and grow. We have investigated the effect of buffer choice on the solubility, nucleation and growth of CEWL. CEWL was purified by dialysis against a .05M phosphate buffer and chromatographic separation from contaminants in a sepharose column. Solubility studies were made as a function of buffer concentration for phosphate and formate buffers, and the nucleation and growth of crystals at 10 C was studied as a function of pH for oxalate, succinate, formate, butyrate, carbonate, phosphate and acetate buffer solutions. The solubility data support the conclusion that there is a solubility minimum as a function of buffer concentration for amphiphilic molecules, while no minimum is observed for a phosphate buffer. Nucleation is suppressed at pH greater than pKa for all buffers except phosphate. The aspect ratio of the (110) faces is shown to be a function of crystal size, rather than pH.

Gibson, Ursula J.↗

DOE OSTI2025

Assessing the Long-Term Stability of Anion Exchange Membranes for Electrochemical CO 2 Reduction

Materials and cell components used in CO 2 electrolysis have largely been adapted from technologies initially developed for water electrolysis and fuel cells. However, electrochemical CO 2 reduction introduces distinct material challenges due to the unique chemical environment in this process. Here, in this study, we conducted ex-situ 1000 h stability tests on commonly used anion exchange membranes, exposing them exclusively to electrolytes and organic molecules used or produced during CO 2 electrolysis, at concentrations relevant to and compatible with postseparation processes. Notably, 15% w/w n-propanol and 5 M acetic acid caused complete dissolution or partial disintegration of the membranes unless cross-linking was present and remained stable throughout the test. When the membranes stayed physically intact, most of them exhibited excellent chemical stability in alkaline medium containing alcohols or formic acid, which was confirmed by vibrational spectroscopy and ion exchange capacity measurements. However, exposure to alcohol-and acid-containing solutions led to a substantial increase in swelling and water uptake, with potential implications for mechanical stability, ion/product crossover, and compression management of adjacent components. The potential effects of CO 2 electroreduction products on membrane stability, their subsequent impact on electrolyzer performance, and mitigation strategies are discussed.

CO2RR↗

DOE OSTI2024

Imaging and Analysis of Insoluble Electrorefiner Material

Throughout pyroprocessing efforts at the Hot Fuel Examination Facility (HFEF), insoluble material has accumulated in the Electrorefiner (ER) vessel. The objective of this effort was to analyze the accumulated material to determine its origin. Material was removed from the ER salt bath and distilled to remove excess salt prior to performing analysis. Three samples were sent for chemical and isotopic analysis and underwent an ethyl acetate-bromine dissolution to segregate the oxide fraction from the metal fraction. Actinide concentrations were determined using a quadrupole–inductively coupled plasma–mass spectrometer (Q-ICP-MS). Three additional samples were sent for morphologic and elemental analysis by scanning electron microscopy (SEM) with Energy Dispersive X-ray (EDX) analysis at the Irradiated Materials Characterization Laboratory (IMCL). Analyses suggest that the material is primarily composed of UO2. with a small fraction of metal. This study draws no single conclusion as to the origin of the insoluble material in the ER. The particle sizes and morphologies observed in SEM micrographs indicate that the larger particles observed may be a result of introducing material to the ER that has not been completely reduced in Oxide Reduction (OR) operations, which precede electrorefining. Smaller particles may be due to reactions with oxygen and moisture present in HFEF. This research suggests that microscopic analysis of fuel particles before and after OR operations (including after distillation) as well as the uranium product collected on the cathode in the ER would increase understanding about particle morphology within the pyrochemical process.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS1984

Calcium elicited asymmetric auxin transport in gravity influenced root segments

Auxin is a prime candidate for regulating and modulating the differential growth response of primary corn roots to gravity. Auxin, indole-3-acetic acid (IAA), both promotes and inhibits root elongation rapidly within a narrow concentration range. Thus growth regulation would require only small changes in the short lag period for initiation of gravitropism. Since auxin is transported to/through the zone of elongation toward the meristem, it may serve as a direct communication link between the zone of elongation, site of gravitropic response, and the root cap (RC), site of gravity perception. When auxin transport is inhibited, gravitropism is also inhibited. Napthylpthalamic acid (NPA) is one such inhibitor. It inhibits gravitropism only when applied to the apical growing and dividing region of the root. Application at the basal end of the root does not influence gravitropic NPA causes upward curvature when applied to the upper surface of horizontal, two day-old, intact corn roots. This effect is countered by application of IAA to the opposite side.

Edwards, K. L.↗

NASA NTRS1995

Anodizing And Sealing Aluminum In Nonchromated Solutions

Improved process for anodizing and sealing aluminum involves use of 5 volume percent sulfuric acid in water as anodizing solution, and 1.5 to 2.0 volume percent nickel acetate in water as sealing solution. Replaces process in which sulfuric acid used at concentrations of 10 to 20 percent. Improved process yields thinner coats offering resistance to corrosion, fatigue life, and alloy-to-alloy consistency equal to or superior to those of anodized coats produced with chromated solutions.

Emmons, John R.↗

NASA NTRS2002

Solid state 31phosphorus nuclear magnetic resonance of iron-, manganese-, and copper-containing synthetic hydroxyapatites

The incorporation of micronutrients into synthetic hydroxyapatite (SHA) is proposed for slow release of these nutrients to crops in the National Aeronautics and Space Administration's (NASA's) Advanced Life Support (ALS) program for Lunar or Martian outposts. Solid state 31P nuclear magnetic resonance (NMR) was utilized to examine the paramagnetic effects of Fe3+, Mn2+, and Cu2+ to determine if they were incorporated into the SHA structure. Separate Fe3+, Mn2+, and Cu2+ containing SHA materials along with a transition metal free SHA (pure-SHA) were synthesized using a precipitation method. The proximity (<1 nm) of the transition metals to the 31P nuclei of SHA were apparent when comparing the integrated 31P signal intensities of the pure-SHA (87 arbitrary units g-1) with the Fe-, Mn-, and Cu-SHA materials (37-71 arbitrary units g-1). The lower integrated 31P signal intensities of the Fe-, Mn-, and Cu-SHA materials relative to the pure-SHA suggested that Fe3+, Mn2+, and Cu2+ were incorporated in the SHA structure. Further support for Fe3+, Mn2+, and Cu2+ incorporation was demonstrated by the reduced spin-lattice relaxation constants of the Fe-, Mn-, and Cu-SHA materials (T'=0.075-0.434s) relative to pure-SHA (T1=58.4s). Inversion recovery spectra indicated that Fe3+, Mn2+, and Cu2+ were not homogeneously distributed about the 31P nuclei in the SHA structure. Extraction with diethylene-triamine-penta-acetic acid (DTPA) suggested that between 50 and 80% of the total starting metal concentrations were incorporated in the SHA structure. Iron-, Mn-, and Cu-containing SHA are potential slow release sources of Fe, Mn, and Cu in the ALS cropping system.

NASA Discipline Life Support Systems↗

DOE OSTI2022

Restoration Insights Gained from a Field Deployment of Dithionite and Acetate at a Uranium In Situ Recovery Mine

Mining uranium by in situ recovery (ISR) typically involves injecting an oxidant and a complexing agent to mobilize and extract uranium in a saturated ore zone. This strategy involves less infrastructure and invasive techniques than traditional mining, but ISR often results in persistently elevated concentrations of U and other contaminants of concern in groundwater after mining. These concentrations may remain elevated for an extended period without remediation. Here, we describe a field experiment at an ISR facility in which both a chemical reductant (sodium dithionite) and a biostimulant (sodium acetate) were sequentially introduced into a previously mined ore zone in an attempt to establish reducing geochemical conditions that, in principle, should decrease and stabilize aqueous U concentrations. While several lines of evidence indicated that reducing conditions were established, U concentrations did not decrease, and in fact increased after the amendment deployments. We discuss likely reasons for this behavior, and we also discuss how the results provide insights into improvements that could be made to the restoration process to benefit from the seemingly detrimental behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS1994

The effects of temperature and NaCl concentration on tetragonal lysozyme face growth rates

Measurements were made of the (110) and (101) face growth rates of the tetragonal form of hen egg white lysozyme at 0.1M sodium acetate buffer, pH 4.0, from 4 to 22 C and with 3.0%, 5.0%, and 7.0% NaCl used as the precipitating salt. The data were collected at supersaturation ratios ranging from approximately 4 to approximately 63. Both decreasing temperature and increasing salt concentrations shifted plots of the growth rate versus C/C(sat) to the right, i.e. higher supersaturations were required for comparable growth rates. The observed trends in the growth data are counter to those expected from the solubility data. If tetragonal lysozyme crystal growth is by addition of ordered aggregates from the solution, then the observed growth data could be explained as a result of the effects of lowered temperature and increased salt concentration on the kinetics and equilibrium processes governing protein-protein interactions in solution. The data indicate that temperature would be a more tractable means of controlling the growth rate for tetragonal lysozyme crystals contrary to the usual practice in, e.g., vapor diffusion protein crystal growth, where both the precipitant and protein concentrations are simultaneously increased. However, the available range for control is dependent upon the protein concentration, with the greatest growth rate control being at the lower concentration.

Forsythe, Elizabeth↗

DOE OSTI2020

Solubility Predictions for Hanford Tank Concentrates with HSC - 20459

The commercially available Outotec HSC 9.9.0{sup R} provides excellent predictions for the solubilities of many species for Hanford waste tank concentrates. The HSC solubility predictions with a Harvie activity model agreed well with five boildowns that showed solubility limits for NaNO{sub 3}, NaNO{sub 2}, Na{sub 2}CO{sub 3}, NaF, Na{sub 2}SO{sub 4}, and Na{sub 3}PO{sub 4}. However, the HSC did not predict density and therefore water content very well and therefore we used the measured densities and derived water content from the difference between measured density and assays. Furthermore, we adjusted the HSC enthalpy for the minor species Na{sub 3}PO{sub 4}*NaF double salt in order to fit the five boildowns as well. Previous work has shown that gibbsite becomes and remains supersaturated in all of these boildowns and so there was no alumina precipitation despite supersaturation. Furthermore, an equilibrium model like HSC always shows complete oxidation of any TOC in the presence of nitrate and nitrite. We therefore suppressed the HSC oxidation of acetate and oxalate in order to fit measured acetate and oxalate solubilities as TOC. Space in Hanford waste tanks is very limited and therefore evaporator campaigns continue to recover needed tank space from dilute tank liquids. Prior to each evaporator campaign, a boildown of a sample of tank liquid for each campaign provides a basis for planning by measuring density, water activity, soluble species, and solids precipitation as a function of concentration at 18 deg. C. These boildowns then provide validations and calibrations for the HSC solubility prediction for Hanford wastes. Previous work has shown the solubilities of minor electrolytes in these five boildowns follow rather simple power law solubility products. Hanford's 222-S laboratory has reported each of five boildowns for concentrated liquids from five waste tanks and tank blends. All boildowns eventually showed the precipitation of the dominant electrolyte, NaNO{sub 3}, and overall solution activity largely drives all solubility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Data for Chemical-Free Production of Multiple High-Value Bioproducts from Metabolically Engineered Transgenic Sugarcane ‘Oilcane’ Bagasse and Their Recovery Using Nanofiltration

Bioenergy crops have potential for being a sustainable and renewable feedstock for biofuels and various value-added bioproducts. The study utilizes recently developed transgenic sugarcane (“oilcane”) bagasse for chemical-free coproduction of high-value bioproducts, i.e., furfurals, HMF, acetic acid, cellulosic sugars, and vegetative lipids. Hydrothermal pretreatment was optimized at 210 °C for 5 min to coproduce 6.91%, 2.67%, 5.07%, 2.42% and 37.82% (w/w) furfurals, HMF, acetic acid, vegetative lipids, and cellulosic sugars, respectively from lignocellulosic biomass. Additionally, nanofiltration system in-series was successfully established to recover sugars, furfurals, HMF, and acetic acid from the pretreatment liquor. 1st nanofiltration with Duracid NF membrane rejected ∼99% sugars. Concentrated sugars with significantly reduced inhibitory products were obtained in retentate for fermentation. 2nd nanofiltration with NF90 membrane used permeate of 1st nanofiltration as feed and rejected ∼ 86% furfurals. The work demonstrates the feasibility of coproducing and recovering multiple biochemicals from lignocellulosic biomass.

Biomass Analytics↗

DOE OSTI2022

Aging and Lifetimes Program Annual Report - Part I: Update to BDNPA-BDNPF phase diagram (FY2022)

The eutectic mixture nitroplasticizer (NP) contains water, without exception, on the order of hundreds to thousands of parts per million depending on the exposure conditions. Therefore, to evaluate the properties of NP, one must consider that NP is not simply comprised of two constituents. Here we supplement previous work on the physical properties of NP (Edgar et al., 2020) by expanding on the experimental work therein and addressing inaccuracies detailed in a subsequent comment article (Brown, 2021). Specifically, the purpose of this work is to clarify and modify the phase diagram of the bis(2,2-dinitropropyl) acetal with bis(2,2-dinitropropyl) formal eutectic mixture by considering the effect of water concentrations on the nucleation process.

36 MATERIALS SCIENCE↗