Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffractive computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Modelling Sonic Boom Propagation through Planetary Boundary Layer Turbulence near the Lateral Extent of the Carpet

Nonlinear acoustic propagation of sonic booms in the atmospheric boundary layer is considered in the context of a one-way solution to a third order wave equation. A split-step approach is utilized to compute different physical effects efficiently. Unlike previous approaches, the diffraction effects are computed exactly in the forward direction with no restriction on the angle of propagation. This results in more accurate modelling of sonic boom near the carpet edge. Heterogenous flow effects are incorporated with a wide-angle parabolic approximation. Nonlinear propagation is computed with a Burgers-Hayes method. Turbulence in the medium is constructed by the method of random Fourier modes. The turbulence spectra are constructed using an altitude dependent 3-dimensional von Karman spectrum. The turbulence field is considered frozen, as the eddy turnover time in the atmospheric boundary layer is generally much larger than the propagation time of the acoustic wave. Comparisons with benchmark predictions from the PCBoom software are conducted. The benchmark cases provide insight into the accuracy of the current prediction code for non-turbulent atmospheres. Future work is discussed regarding the prediction of shaped booms, boundary conditions, and predictions near the lateral extent of the boom carpet where previous approaches fail to capture the diffraction effects.

sonic boom↗

The Thermophysical Properties of TcO2

Technetium-99 is a highly radioactive isotope with a long half-life that is common in nuclear waste. It volatizes at a low temperature, which poses a significant challenge to the clean-up and containment processes. Due to difficulties in purifying technetium compounds, their thermophysical properties have not been measured or calculated. Here, first principle methods are used along with the quasi quasi-harmonic harmonic approximation to compute the Debye temperature, volumetric thermal expansion coefficient, bulk modulus, and heat capacity of rutile TcO2 for temperatures ranging from 0 to 1500 K and applied pressures ranging from 0 to 255 GPa. The computed atomic structures agree well with the results from diffraction measurements. The computed thermophysical properties are in the neighborhood of other rutile metal oxides and, in particular, are within approximately 10–13% of rutile ReO2, which is frequently used as a substitute for TcO2 in experimental studies.

Zhong, Hong↗

Digital electron diffraction – seeing the whole picture

Computer control of beam tilt and image capture allows the collection of electron diffraction patterns over a large angular range, without any overlap in diffraction data and from a region limited only by the size of the electron beam. This results in a significant improvement in data volumes and ease of interpretation. The advantages of convergent-beam electron diffraction for symmetry determination at the scale of a few nm are well known. In practice, the approach is often limited due to the restriction on the angular range of the electron beam imposed by the small Bragg angle for high-energy electron diffraction, i.e. a large convergence angle of the incident beam results in overlapping information in the diffraction pattern. Techniques have been generally available since the 1980s which overcome this restriction for individual diffracted beams, by making a compromise between illuminated area and beam convergence. Here a simple technique is described which overcomes all of these problems using computer control, giving electron diffraction data over a large angular range for many diffracted beams from the volume given by a focused electron beam (typically a few nm or less). The increase in the amount of information significantly improves the ease of interpretation and widens the applicability of the technique, particularly for thin materials or those with larger lattice parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

PSSP, a Computer Program for the Crystal Structure Solution of Molecular Materials from X-ray Powder Diffraction Data

This work describes the computer program PSSP (powder structure solution program) for the crystal structure solution of molecular solids from X-ray powder diffraction data. This direct-space structure solution program uses the simulated annealing global optimization algorithm to minimize the difference between integrated intensities calculated from trial models and those extracted in a Le Bail fit of the experimental pattern, using a cost function for dealing with peak overlap through defined intensity correlation coefficients, computationally faster to calculate than R{sub wp}. The methodology outlined is applicable to organic solids composed of moderately complex rigid and flexible molecules, using diffraction data up to relatively low resolution. PSSP performance tests using 11 molecular solids with six to 20 degrees of freedom are analyzed.

99 GENERAL AND MISCELLANEOUS↗

Diffraction Analysis Of Distorted Reflector Antennas

Effects of systematic distortions of surfaces on radiation patterns predicted. Computer program for Diffraction Analysis of Reflector Antennas Subject to Systematic Distortions predicts performance of reflector antennas subject to sinusoidal, thermal, or gravitational distortions. Provides local interpolation algorithm readily applied to nonregular distribution of data. Developed in UNIVAC FORTRAN 77 for UNIVAC computer.

Rahmat-Samii, Yahya↗

Radar transponder antenna pattern analysis for the space shuttle

In order to improve tracking capability, radar transponder antennas will soon be mounted on the Shuttle solid rocket boosters (SRB). These four antennas, each being identical cavity-backed helices operating at 5.765 GHz, will be mounted near the top of the SRB's, adjacent to the intertank portion of the external tank. The purpose is to calculate the roll-plane pattern (the plane perpendicular to the SRB axes and containing the antennas) in the presence of this complex electromagnetic environment. The large electrical size of this problem mandates an optical (asymptotic) approach. Development of a specific code for this application is beyond the scope of a summer fellowship; thus a general purpose code, the Numerical Electromagnetics Code - Basic Scattering Code, was chosen as the computational tool. This code is based on the modern Geometrical Theory of Diffraction, and allows computation of scattering of bodies composed of canonical problems such as plates and elliptic cylinders. Apertures mounted on a curved surface (the SRB) cannot be accomplished by the code, so an antenna model consisting of wires excited by a method of moments current input was devised that approximated the actual performance of the antennas. The improvised antenna model matched well with measurements taken at the MSFC range. The SRB's, the external tank, and the shuttle nose were modeled as circular cylinders, and the code was able to produce what is thought to be a reasonable roll-plane pattern.

Radcliff, Roger↗

Ab Initio Computation of Rotationally-Averaged Pump–Probe X-ray and Electron Diffraction Signals

We develop a new algorithm for the computation of the rotationally averaged elastic molecular diffraction signal for the cases of perpendicular or parallel pump–probe geometries. The algorithm first collocates the charge density from an arbitrary ab initio wave function onto a Becke quadrature grid [A. Becke, J. Chem. Phys. 1988, 88, 2457], providing a high-fidelity multiresolution representation of the charge density. A double sum is then performed over the Becke grid points, and the interaction between points computed using the scattering kernels of Williamson and Zewail [J. C. Williamson and A. H. Zewail, J. Phys. Chem. 1994, 98, 2766]. These kernels analytically average over the molecular orientations with the cos 2 γ selection factor appropriate for one-photon dipole absorption in a perpendicular pump–probe geometry. We demonstrate that the method is converged with small grids containing <500 points/atom. We implement the algorithm on a GPU for increased efficiency and emonstrate the algorithm for molecules with up to a few dozen atoms. We explore the accuracy of the independent atom model (IAM) by comparison with our new and more accurate method. We also investigate the possibility of detecting signatures of electronic transitions in polyatomic pump–probe diffraction experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolution of texture and internal stresses within polycrystalline rock salt using in situ 3D synchrotron computed tomography and 3D X-ray diffraction

Over time rock salt caverns have been extensively used as reliable repositories for hazardous waste such as nuclear waste, oil or compressed gases. Undisturbed rock salt deposits in nature are usually impermeable and have very low porosity. However, rock salt formations under excavation stresses can develop crack networks, which increase their porosities; and in the case of a connected crack network within the media, rock salt may become permeable. Although the relationship between the permeability of rock salt and the applied stresses has been reported in the literature, a microscopic study that investigates the properties influencing this relationship, such as the evolution of texture and internal stresses, has yet to be conducted. This study employs in situ 3D synchrotron micro-computed tomography and 3D X-ray diffraction (3DXRD) on two small-scale polycrystalline rock salt specimens to investigate the evolution of the texture and internal stresses within the specimens. The 3DXRD technique measures the 3D crystal structure and lattice strains within rock salt grains. The specimens were prepared under 1D compression conditions and have shown an initial {111} preferred texture, a dominant {110}$\langle1\bar{1}0\rangle$ slip system and no fully connected crack network. The {111} preferred texture under the unconfined compression experiment became stronger, while the {111}$\langle1\bar{1}0\rangle$ slip system became more prominent. The specimens did not have a fully connected crack network until applied axial stresses reached about 30 MPa, at a point where the impermeability of the material becomes compromised due to the development of multiple major cracks.

36 MATERIALS SCIENCE↗

On the use of classical and conical diffraction mountings for XUV gratings

A description is given of the properties of plane diffraction gratings used in conical diffraction. Formulas are given for computing the direction of the diffracted orders. Experiments were performed to investigate the behavior of gratings used on conical diffraction mountings. Comparisons made with classical diffraction mountings show a significant increase in the efficiency of the -1 order. An empirical formula to predict the efficiencies of gratings used in conical diffraction mountings has been verified by the measurements.

Neviere, M.↗

Quantum dynamical simulation of the scattering of Ar from a frozen LiF(100) surface based on a first principles interaction potential

In-plane two and three dimensional diffraction patterns are computed for the vertical scattering of an Ar atom from a frozen LiF(100) surface. Suitable collimation of the incoming wavepacket serves to reveal the quantum mechanical diffraction. The interaction potential is based on a fit to an ab initio potential calculated using density functional theory with dispersion corrections. Due to the potential coupling found between the two horizontal surface directions, there are noticeable differences between the quantum angular distributions computed for two and three dimensional scattering. The quantum results are compared to analogous classical Wigner computations on the same surface and with the same conditions. The classical dynamics largely provides the envelope for the quantum diffractive scattering. The classical results also show that the corrugation along the [110] direction of the surface is smaller than along the [100] direction, in qualitative agreement with experimental observations of unimodal and bimodal scattering for the [110] and [100] directions, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computing Composition/Depth Profiles From X-Ray Diffraction

Diffraction-intensity bands deconvolved relatively quickly. TIBAC constructs composition/depth profiles from X-ray diffraction-intensity bands. Intensity band extremely sensitive to shape of composition/depth profile. TIBAC incorporates straightforward transformation of intensity band that retains accuracy of earlier simulation models, but is several orders of magnitude faster in total computational time. TIBAC written in FORTRAN 77 for batch execution.

Wiedemann, K. E.↗

DXRD : a user-friendly suite of two- and multiple-beam dynamical X-ray diffraction programs

The DXRD program suite consisting of a series of dynamical theory programs is introduced for computing dynamical X-ray diffraction from single crystals. Its interactive graphical user interfaces (GUIs) allow general users to make complicated calculations with minimal effort. It can calculate plane-wave Darwin curves of single crystals (or multiple crystals) for both the Bragg and Laue cases, including grazing-incidence diffraction and backward diffraction (with Bragg angles approaching 90°). It is also capable of simulating rocking curves for divergent incident X-ray beams with finite bandwidths. A unique feature of DXRD is that it provides a convenient GUI-based multiple-beam diffraction program that can accurately compute arbitrary N-beam diffraction of any geometry using a universal 4N × 4N matrix method. DXRD also provides a mapping program for plotting all the multiple-beam diffraction lines (monochromator glitches) in the azimuth–energy coordinate system. All these functions make DXRD a convenient and powerful software tool for designing crystal-based synchrotron/X-ray optics (monochromators, analyzers, polarizers, phase plates etc.) and for crystal characterization, X-ray spectroscopy and X-ray diffraction teaching.

Bragg reflection↗

Physical Interpretation of Strict Solutions of Diffraction Problems by Heuristic Relations

We propose a new approach to construct heuristic relations describing solutions of diffraction problems. Those relations are based on physical principles and allow one to interpret mathematically strict solutions. Since the heuristic relations possess high performance and accuracy, they can also be used along with any strict approach or experimental results for a significant improvement of efficiency of solutions of practical problems related to applications of the diffraction theory.

97 MATHEMATICS AND COMPUTING↗

A scattering approach to sea wave diffraction

This paper intends to show a model for the diffraction of sea waves approaching an OWC device, which converts the sea waves motion into mechanical energy and then electrical energy. This is a preliminary study to the optimisation of the device, in fact the computation of sea waves diffraction around the device allows the estimation of the sea waves energy which enters into the device. The computation of the diffraction phenomenon is the result of a sea waves scattering problem, solved with an integral equation method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing

In this paper, a metallic hybrid structure, consisting of an Inconel-718 matrix and a Co-Cr internal structure, was successfully manufactured using laser direct energy deposition process. Characterizations were performed using energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), neutron-computed tomography (nCT), and electron back-scatter diffraction (EBSD) to verify the interfaces between Co-rich and Ni-rich phases. nCT revealed the internal structures to be continuous without cracking or significant intermixing due to inter-diffusion of Co and Ni (i.e., dissolved boundaries between the two structures). Minor porosity was detected. EBSD confirmed a good bond at the granular level. No precipitate phases were detected with XRD. Finally, EDS revealed dilution/intermixing between the Co and Ni interfaces presumably due to melt-pool overlay between the matrix and the internal structures.

36 MATERIALS SCIENCE↗

Space Shuttle Underside Astronaut Communications Performance Evaluation

The Space Shuttle Ultra High Frequency (UHF) communications system is planned to provide Radio Frequency (RF) coverage for astronauts working underside of the Space Shuttle Orbiter (SSO) for thermal tile inspection and repairing. This study is to assess the Space Shuttle UHF communication performance for astronauts in the shadow region without line-of-sight (LOS) to the Space Shuttle and Space Station UHF antennas. To insure the RF coverage performance at anticipated astronaut worksites, the link margin between the UHF antennas and Extravehicular Activity (EVA) Astronauts with significant vehicle structure blockage was analyzed. A series of near-field measurements were performed using the NASA/JSC Anechoic Chamber Antenna test facilities. Computational investigations were also performed using the electromagnetic modeling techniques. The computer simulation tool based on the Geometrical Theory of Diffraction (GTD) was used to compute the signal strengths. The signal strength was obtained by computing the reflected and diffracted fields along the propagation paths between the transmitting and receiving antennas. Based on the results obtained in this study, RF coverage for UHF communication links was determined for the anticipated astronaut worksite in the shadow region underneath the Space Shuttle.

Hwu, Shian U.↗

Edge diffracted caustic fields

The fields near a caustic created by an edge diffraction process are computed using the equivalent current concept. These fields are shown to have the property commonly associated with ray optical analysis or the Geometrical Theory of Diffraction (GTD), e.g., a 90 deg phase shift as the ray passes through the caustic. The present effort is directed toward consideration of the caustic created by an edge diffraction process. Particular attention is focused on electromagnetic excitation. The acoustic excitation for the hard boundary condition is outlined in an appendix. In addition, goal is to establish the extent of the caustic region. This is of particular importance when a ray optical solution involves multiply-diffracted terms in that the minimum size of the body that can be analyzed may be restricted by the extent of the caustic, i.e., the 90 deg phase shift used in ray optical analysis may be introduced only if the caustic is contained on the surface being studied.

Burnside, W. D.↗

Prediction challenge: First principles simulation of the ultrafast electron diffraction spectrum of cyclobutanone

Computer simulation has long been an essential partner of ultrafast experiments, allowing the assignment of microscopic mechanistic detail to low-dimensional spectroscopic data. However, the ability of theory to make a priori predictions of ultrafast experimental results is relatively untested. Herein, as a part of a community challenge, we attempt to predict the signal of an upcoming ultrafast photochemical experiment using state-of-the-art theory in the context of preexisting experimental data. Specifically, we employ ab initio Ehrenfest with collapse to a block mixed quantum–classical simulations to describe the real-time evolution of the electrons and nuclei of cyclobutanone following excitation to the 3s Rydberg state. The gas-phase ultrafast electron diffraction (GUED) signal is simulated for direct comparison to an upcoming experiment at the Stanford Linear Accelerator Laboratory. Following initial ring-opening, dissociation via two distinct channels is observed: the C3 dissociation channel, producing cyclopropane and CO, and the C2 channel, producing CH2CO and C2H4. Direct calculations of the GUED signal indicate how the ring-opened intermediate, the C2 products, and the C3 products can be discriminated in the GUED signal. We also report an a priori analysis of anticipated errors in our predictions: without knowledge of the experimental result, which features of the spectrum do we feel confident we have predicted correctly, and which might we have wrong?

Chemistry↗