Search NASA⌕ Search

SEARCH · Search NASA

Results for “dissolution rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Degradation of Dome Cutting Minerals in Hanford Waste - 13100

At the Hanford Tank Farms, recent changes in retrieval technology require cutting new risers in several single-shell tanks. The Hanford Tank Farm Operator is using water jet technology with abrasive silicate minerals such as garnet or olivine to cut through the concrete and rebar dome. The abrasiveness of these minerals, which become part of the high-level waste stream, may enhance the erosion of waste processing equipment. However, garnet and olivine are not thermodynamically stable in Hanford waste, slowly degrading over time. How likely these materials are to dissolve completely in the waste before the waste is processed in the Waste Treatment and Immobilization Plant can be evaluated using theoretical analysis for olivine and collected direct experimental evidence for garnet. Based on an extensive literature study, a large number of primary silicates decompose into sodalite and cancrinite when exposed to Hanford waste. Given sufficient time, the sodalite also degrades into cancrinite. Even though cancrinite has not been directly added to any Hanford tanks during process times, it is the most common silicate observed in current Hanford waste. By analogy, olivine and garnet are expected to ultimately also decompose into cancrinite. Garnet used in a concrete cutting demonstration was immersed in a simulated supernate representing the estimated composition of the liquid retrieving waste from Hanford tank 241-C-107 at both ambient and elevated temperatures. This simulant was amended with extra NaOH to determine if adding caustic would help enhance the degradation rate of garnet. The results showed that the garnet degradation rate was highest at the highest NaOH concentration and temperature. At the end of 12 weeks, however, the garnet grains were mostly intact, even when immersed in 2 molar NaOH at 80 deg. C. Cancrinite was identified as the degradation product on the surface of the garnet grains. In the case of olivine, the rate of degradation in the high-pH regimes of a waste tank is expected to depend on two main parameters: carbonate is expected to slow olivine degradation rates, whereas hydroxide is expected to enhance olivine dissolution rates. Which of these two competing dissolution drivers will have a larger impact on the dissolution rate in the specific environment of a waste tank is currently not identifiable. In general, cancrinite is much smaller and less hard than either olivine or garnet, so would be expected to be less erosive to processing equipment. Complete degradation of either garnet or olivine prior to being processed at the Waste Treatment and Immobilization Plant cannot be confirmed, however. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Structural role of ZrO 2 and its impact on properties of boroaluminosilicate nuclear waste glasses

Addition of zirconia (ZrO 2 ) to nuclear waste glasses, even in small amount, significantly affects physical properties such as chemical durability, density, viscosity, and glass transition temperature. Hence ZrO 2 plays an important role in the development of nuclear waste glass compositions. It was found recently that addition of zirconia decreases the initial dissolution rate but increases long-term dissolution by changing the protective properties such as porosity of alteration layers. In this study, the International Simple Glass (ISG) with different amounts of ZrO 2 /SiO 2 substitution was simulated using classical molecular dynamics (MD) simulations and recently developed composition-dependent potential sets. Local structural descriptors such as bond distances, bond angle distributions, and coordination numbers were systematically studied and compared with experimental values. Zr K-edge extended X-ray absorption fine structure spectra were also calculated and compared with experiment to resolve the local coordination environment around Zr. Medium-range structural information (e.g., Qn distribution, network connectivity, and ring-size distribution) showed that ZrO 2 /SiO 2 substitution increases the overall network connectivity and the amount of smaller sized rings, which will decrease the initial dissolution rate by strengthening the glass network and limiting water diffusivity. Finally, diffusion and dynamic properties of the ions were studied and discussed to develop a better understanding of the chemical durability of these glasses.

36 MATERIALS SCIENCE↗

Degradation of dome cutting minerals in Hanford waste

At the Hanford Tank Farms, recent changes in retrieval technology require cutting new risers in several single-shell tanks. The Hanford Tank Farm Operator is using water jet technology with abrasive silicate minerals such as garnet or olivine to cut through the concrete and rebar dome. The abrasiveness of these minerals, which become part of the high-level waste stream, may enhance the erosion of waste processing equipment. However, garnet and olivine are not thermodynamically stable in Hanford waste, slowly degrading over time. How likely these materials are to dissolve completely in the waste before the waste is processed in the Waste Treatment and Immobilization Plant can be evaluated using theoretical analysis for olivine and collected direct experimental evidence for garnet. Based on an extensive literature study, a large number of primary silicates decompose into sodalite and cancrinite when exposed to Hanford waste. Given sufficient time, the sodalite also degrades into cancrinite. Even though cancrinite has not been directly added to any Hanford tanks during process times, it is the most common silicate observed in current Hanford waste. By analogy, olivine and garnet are expected to ultimately also decompose into cancrinite. Garnet used in a concrete cutting demonstration was immersed in a simulated supernate representing the estimated composition of the liquid retrieving waste from Hanford tank 241-C-107 at both ambient and elevated temperatures. This simulant was amended with extra NaOH to determine if adding caustic would help enhance the degradation rate of garnet. The results showed that the garnet degradation rate was highest at the highest NaOH concentration and temperature. At the end of 12 weeks, however, the garnet grains were mostly intact, even when immersed in 2 molar NaOH at 80 deg C. Cancrinite was identified as the degradation product on the surface of the garnet grains. In the case of olivine, the rate of degradation in the high-pH regimes of a waste tank is expected to depend on two main parameters: carbonate is expected to slow olivine degradation rates, whereas hydroxide is expected to enhance olivine dissolution rates. Which of these two competing dissolution drivers will have a larger impact on the dissolution rate in the specific environment of a waste tank is currently not identifiable. In general, cancrinite is much smaller and less hard than either olivine or garnet, so would be expected to be less erosive to processing equipment. Complete degradation of either garnet or olivine prior to being processed at the Waste Treatment and Immobilization Plant cannot be confirmed, however.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Semi-Dynamic Leach Testing of Densified Silicon-based Iodine Waste Forms

Iodine waste forms (IWF) require a conceptual corrosion release model (CCRM) to provide iodine (I) release rates for performance modeling nuclear waste disposal repositories. To develop a CCRM, an understanding of the corrosion mechanisms of the IWF are required along with data from consistent test methods to parameterize the model. The present study has advanced both areas by providing and assessing the corrosion resistance of IWF types based on their processing history in minor variations of semi-dynamic leach tests. The test included a series of semi-dynamic leach tests using monolithic IWFs in deionized water (leachant). Several experiments were conducted under alternate test conditions with changes to temperature, leachant replacement, leachant pH, leachant volume, masking, and surface finish to elucidate if varying these conditions impacted IWF corrosion behavior. Tests were conducted on two classes of IWFs: (1) I-bearing silver-mordenite (AgZ) materials processed by hot isostatic pressing (HIP) at different temperatures, pressures, sizes, and times; and (2) I-bearing silver-functionalized silica aerogels (SFA) processed by either HIP or spark plasma sintering (SPS). The corrosion susceptibility of AgZ samples was influenced by HIP temperature and pressure. The SPS SFAs retained I far better than HIP SFAs. Additional findings in this study include: (1) The iodine dissolution rate decreased with decreasing temperature, (2) a common ion effect may occur and slow dissolution of the host phase if the leachant is not regularly replaced, (3) pH controls the dissolution rate, and (4) the iodine dissolution rate slows with extended test time (up to 224 days). Based on this work, these parameters should thus be represented when developing a CCRM.

corrosion↗

Direct observation of C 3 S particle dissolution using fast nano X-ray computed tomography

Tricalcium silicate (C 3 S) occupies 50 % to 70 % of ordinary portland cement (OPC) by mass and it is an important component affecting the hydration of OPC [1], [2], [3], [4], [5], [6], [7]. Generally, the hydration of C 3 S is described by two processes: the dissolution of C 3 S particles and the precipitation of hydration products. While it is understood that the dissolution rates of C 3 S vary with time, more precise measurements are needed to understand this process. Many mechanisms have been proposed to explain the time-evolving dissolution rates of C 3 S [2]. The metastable barrier hypothesis suggests that a thin metastable layer of hydrates forms around the C 3 S particle surface and prohibits the access of grains to the aqueous solution [8], [9], [10], [11], [12]. The slow dissolution step hypothesis suggests that the increased ion concentration from the initial reaction delays the C 3 S dissolution [2], [13], [14], [15], [16], [17]. More recent publications suggest that C 3 S may react differently depending on the existence of crystallographic defects [18], [19], [20]. Etch pits are thought to open on the particle surface during the initial reaction and this contributes to the C 3 S dissolution [21], [22]. As hydrates precipitate and cover these highly reactive surfaces, hydration slows down and the induction period starts [18], [23], [24], [25], [26]. Many experiments have been conducted to test the aforementioned mechanisms. Some hydration studies utilize bulk measurements, such as isothermal calorimetry [27], [28], [29], pore solution analysis [30], quasi-elastic neutron scattering [31], and nuclear magnetic resonance spectroscopy [32], [33]. One limitation of these measurements is that they do not provide direct and detailed information on the individual C 3 S particles. Some other studies utilize imaging techniques, such as scanning electron microscopy (SEM) [34], [35], [36] and transmission electron microscopy (TEM) [37]. However, SEM/TEM cannot track the evolution of individual particles throughout hydration [34], [35], [38], [39], [40] and they do not give insights into the microstructure of materials before hydration [34], [35], [39]. This makes it challenging to draw strong conclusions from only SEM or TEM observations. Synchrotron X-ray tomography techniques have been used more broadly in recent years to study cement hydration. They are not only non-destructive but also able to image a sample in full 3D with resolutions that can reach from micron to nanoscale. Nano computed tomography (nCT) is one technique that has been applied to study cement hydration at the nanoscale [26], [41]. A typical nCT can reach a pixel size from 15 to 65 nm, providing enough detail for observing features <1 μm. However, nCT often takes >0.5 h to finish one scan. This makes the application of this technique on continuous scans for in-situ observations challenging. Fast X-ray computerized tomography (fCT) is another technique that has shown success in studying the time-evolving cement microstructures [20], [42], [43], [44], [45], [46], [47], [48], [49]. Due to the high flux of the X-ray beam from the synchrotron ring, fCT allows a scan to be captured within 1 min at a pixel size of 1 μm. This allows a paste sample to be continuously scanned during the hydration process. However, the micron-sized resolutions limit does not provide detailed insights for particles <5 μm [20], [49]. Fortunately, the combination of nCT and fCT has allowed the development of fast nano X-ray computed tomography (fnCT). fnCT can capture a 3D data set in <2 min at a pixel size of 50 nm. This makes this procedure an exciting method to evaluate hydrating pastes. fnCT collects multiple X-ray radiographs at various rotation angles and generates a 3D model of the scanned sample, which is also referred to as a 3D tomography [50], [51]. In one tomography, the X-ray absorptions of different components (e.g., C 3 S and hydrates) differ as functions of density and chemistry [52], [53]. These X-ray absorption contrasts can be used to extract detailed information about the 3D microstructure [26], [54], [55]. In this paper, fnCT is used to collect time-lapse tomographs of hydrating C 3 S paste from 18 min after mixing to 7 h of hydration. The bulk measurements of anhydrous C 3 S, as well as the microstructural changes of individual C 3 S particles, are directly observed, quantified, and discussed. The dissolution behavior of C 3 S particles at various size scales is systematically analyzed and compared. This work aims to find the relationship between the size of C 3 S particle sizes and their dissolution rates. This provides significant insights into the early-age hydration of C 3 S on length and time scales not previously possible. Because of the magnitude of the data and the substantial amount of observations, this work will solely focus on the change in the anhydrous particles. Changes in the hydration products will be reported in future work.

42 ENGINEERING↗

Effects of quartz particle size and water-to-solid ratio on hydrothermal synthesis of tobermorite studied by in-situ time-resolved X-ray diffraction

Hydrothermal synthesis process of tobermorite (5CaO.6SiO{sub 2}.5H{sub 2}O) has been investigated by in-situ X-ray diffraction using high-energy X-rays from a synchrotron radiation source in combination with a purpose-build autoclave cell. Dissolution rates of quartz were largely affected by its particle size distribution in the starting mixtures. However, the composition (Ca/Si) of non-crystalline C-S-H at the start of tobermorite formation was identical regardless of the quartz dissolution rate. An effect of water-to-solid ratio (w/s) was investigated for samples using fine particle quartz. Tobermorite did not occur with w/s of 1.7 but occurred with w/s higher than 3.0. Surprisingly, however, the dissolution curves of quartz were nearly identical for all samples with w/s from 1.7 to 9, indicating that the dissolution rate is predominated by surface area. Possible reaction mechanism for tobermorite formation will be discussed in terms of Ca and/or silicate ion concentration in the liquid phase and distribution of Ca/Si in non-crystalline C-S-H. - Graphical abstract: Time-resolved XRD data set was obtained at up to 190 deg. C under a saturated steam pressure. Tobermorite (5CaO.6SiO{sub 2}.5H{sub 2}O) formation reaction was investigated in detail for several different starting materials. Highlights: > Hydrothermal formation of tobermorite was monitored by in-situ XRD. > Ca/Si of C-S-H at the start time of tobermorite formation was determined. > The Ca/Si value was identical regardless of the quartz particle size in the starting mixture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fracture Intensity Impacts on Reaction Front Propagation and Mineral Weathering in Three‐Dimensional Fractured Media

Abstract Studying reaction front propagation in heterogeneous natural settings is challenging, but numerical simulations can provide insight into the varying spatial and temporal scales of reaction front propagation. Here, the impact of increasing fracture intensity on mineral dissolution rates, and the extent of reaction front propagation is investigated using reactive transport simulations in upscaled discrete fracture network domains with varied fracture intensity. Domain‐averaged dissolution rates vary less than 0.5 log units regardless of the fracture intensity, but the spatial distribution of reactions is controlled by the location and number of dead‐end fractures and the number of connected flowpaths through the domain. Higher fracture intensities lead to more weathering in the domain because of more available mineral for water‐rock interactions. We find that reaction fronts propagate through the primary flowpaths in the first 10,000 years of the simulation for a 10‐m length domain, then propagate into secondary flowpaths and dead‐end fractures between 10,000 and 100,000 years, and finally into the matrix over timescales of hundreds of thousands of years. The domain‐averaged reaction rates decrease through time corresponding to a transition from dissolution in advection‐dominated, fast‐flowing pathways, to dissolution in transport‐limited zones of disconnected fractures and matrix. Matrix dissolution, or dissolution under transport‐limited conditions, is the dominant process at late times in these simulations. The results of these simulations recreate the observed paradox found in nature where highly fractured hillslopes tend to be more weathered but have slower weathering rates, while hillslopes with fewer fractures, are less weathered but have higher dissolution rates.

58 GEOSCIENCES↗

Effect of the size of nanoparticles on their dissolution within metal-glass nanocomposites under sustained irradiation

We investigate the dissolution law of metallic nanoparticles (NPs) under sustained irradiation. The system is composed of isolated spherical gold NPs (4–100 nm) embedded in an amorphous silica host matrix. Samples are irradiated at room temperature in the nuclear stopping power regime with 4 MeV Au ions for fluences up to 8 × 10{sup 16 }cm{sup −2}. Experimentally, the dependence of the dissolution kinetics on the irradiation fluence is linear for large NPs (45–100 nm) and exponential for small NPs (4–25 nm). A lattice-based kinetic Monte Carlo (KMC) code, which includes atomic diffusion and ballistic displacement events, is used to simulate the dynamical competition between irradiation effects and thermal healing. The KMC simulations allow for a qualitative description of the NP dissolution in two main stages, in good agreement with the experiment. Moreover, the perfect correlation obtained between the evolution of the simulated flux of ejected atoms and the dissolution rate in two stages implies that there exists an effect of the size of NPs on their dissolution and a critical size for the transition between the two stages. The Frost-Russell model providing an analytical solution for the dissolution rate, accounts well for the first dissolution stage but fails in reproducing the data for the second stage. An improved model obtained by including a size-dependent recoil generation rate permits fully describing the dissolution for any NP size. This proves, in particular, that the size effect on the generation rate is the principal reason for the existence of two regimes. Finally, our results also demonstrate that it is justified to use a unidirectional approximation to describe the dissolution of the NP under irradiation, because the solute concentration is particularly low in metal-glass nanocomposites.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dissolution Kinetics of Epitaxial Cadmium Carbonate Overgrowths on Dolomite

Thin films grown on mineral surfaces can immobilize toxic metals in natural systems, but the effects of epitaxy and film thickness on dissolution rates of the overgrowth are typically unknown. To explore these effects, otavite (CdCO 3 ) films were grown on dolomite (104) surfaces from aqueous solutions containing [Cd] = [Ca] = [CO 3 ] = 0.2 mM for 1–48 h and then dissolved in deionized water. Films of various thicknesses and strain states were obtained by varying the growth reaction time. Growth for up to 3 h produced strained thin films with Cd coverages of <4.3 ± 0.6 equivalent monolayers (ML) (corresponding to a thickness of up to 17 Å), whereas reaction times of up to 48 h produced thicker films with as many as 114 ± 14 equivalent ML of Cd. Intrinsic dissolution rates were measured as a function of otavite film thickness by a combination of synchrotron X-ray fluorescence, specular X-ray reflectivity, and atomic force microscopy. As a result, the initial dissolution rates for unstrained films were comparable to those reported for synthetic otavite powders, whereas the thinnest films (<3.1 ± 1.1 ML) dissolved at a 50% slower rate, indicating that epitaxial strain effectively enhanced their stability. We discuss potential reasons for this difference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissolution and initial hydration behavior of tricalcium aluminate in low activity sulfate solutions

Influences of alkali or alkaline earth sulfates on the hydration of cubic tricalcium aluminate (C 3 A) were evaluated by in situ dissolution rate measurements, by ex situ near-surface composition measurements with secondary ion mass spectrometry, and by in situ synchrotron X-ray diffraction to monitor precipitation of hydration products. Both slight reductions in dissolution rate and cation-specific interactions with the solid were observed. The near-surface Ca/Al ratio is significantly lower after some dissolution and the electrolyte cations are incorporated within the surface with different affinities (Mg 2+ > K + > Na + ). An interfacial dissolution-reprecipitation mechanism may explain the observations as well as, or better than, a simple cation exchange. The sulfate concentration in solution affects the rates of both C 3 A dissolution and precipitation of hydration products. Aditionally, sulfate ions likely adsorb at the hydrous Al-rich surface layer, thereby reducing the dissolution rate of aluminates and delaying the precipitation of aluminate hydration products.

36 MATERIALS SCIENCE↗

An international initiative on long-term behavior of high-level nuclear waste glass

Nations using borosilicate glass as an immobilization material for radioactive waste have reinforced the importance of scientific collaboration to obtain a consensus on the mechanisms controlling the long-term dissolution rate of glass. This goal is deemed to be crucial for the development of reliable performance assessment models for geological disposal. The collaborating laboratories all conduct fundamental and/or applied research using modern materials science techniques. This paper briefly reviews the radioactive waste vitrification programs of the six participant nations and summarizes the current state of glass corrosion science, emphasizing the common scientific needs and justifications for on-going initiatives.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Current Efforts in Immobilized Low-Activity Waste Glass Testing to Support the Hanford Site Integrated Disposal Facility - 17119

Cleanup plans for Hanford site high-level radioactive mixed tank waste calls for separating the waste into high-level waste (HLW) and low-activity waste (LAW) fractions. The fractions will be vitrified separately at the Hanford Tank Waste Treatment and Immobilization Plant (WTP). The HLW glass will be sent to an offsite geological disposal facility while the immobilized low-activity waste (ILAW) glass will be disposed at the onsite Integrated Disposal Facility (IDF). In order to inform models used to predict the performance of ILAW glass at IDF, it is necessary to understand the corrosion behavior of the glass. In this paper, we discuss tests that account for the effects of 1) solution chemistry, 2) the ion exchange reaction, and 3) secondary phase formation on the glass dissolution rate. To quantify the effects of solution chemistry, specifically changes in pH, T, and Si concentration, the single-pass flow-through (SPFT) test method is applied. A designed set of these tests results in a set of kinetic rate law parameters that are used in a glass dissolution rate law based on transition-state theory. Furthermore, for SPFT tests with relatively high concentrations of Si, an ion exchange rate is provided. Additionally, through tests such as the pressurized unsaturated flow (PUF) test method, a suite of secondary phases can be compiled. The collection of kinetic rate law parameters, the ion exchange term, and the suite of secondary phases are provided to IDF performance assessment (PA) modelers. Lastly, we present a description of the efforts made to verify and validate the use of these parameters and secondary phases through the use of a field lysimeter present at the Hanford site. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A method for preparation and cleaning of uniformly sized arsenopyrite particles

The oxidative dissolution of sulfide minerals, such as arsenopyrite (FeAsS), is of critical importance in many geochemical systems. A comprehensive understanding of their dissolution rates entails careful preparation of the mineral surface. Measurements of dissolution rates of arsenic from arsenopyrite are dependent on the size and degree of oxidation of its particles, among other factors. In this work, a method was developed for preparation and cleaning of arsenopyrite particles with size range of 150–250 μm. Four different cleaning methods were evaluated for effectiveness based on the removal of oxidized species of iron (Fe), arsenic (As) and sulfur (S) from the surface. The percentage oxidation of the surface was determined using X-ray photoelectron spectroscopy (XPS), and surface stoichiometry was measured using scanning electron microscopy – energy dispersive X-ray spectroscopy (SEM-EDS). Results indicate that sonicating the arsenopyrite particles and then cleaning them with 12N HCl followed by 50% ethanol, and drying in nitrogen was the most effective method. This method was successful in greatly reducing the oxide species of Fe while completely removing oxides of As and S from the arsenopyrite surface. Although sonication and acid cleaning have been widely used for mineral preparation, the method described in this study can significantly reduce grain size heterogeneity as well as surface oxidation, which enables greater control in surface and dissolution experiments.

58 GEOSCIENCES↗

Coupled alkai fieldspar dissolution and secondary mineral precipatation in batch systems-2: New experiments with supercritical CO2 and implications for carbon sequestration

In order to evaluate the extent of CO{sub 2}–water–rock interactions in geological formations for C sequestration, three batch experiments were conducted on alkali feldspars–CO{sub 2}–brine interactions at 150–200 °C and 300 bars. The elevated temperatures were necessary to accelerate the reactions to facilitate attainable laboratory measurements. Temporal evolution of fluid chemistry was monitored by major element analysis of in situ fluid samples. SEM, TEM and XRD analysis of reaction products showed extensive dissolution features (etch pits, channels, kinks and steps) on feldspars and precipitation of secondary minerals (boehmite, kaolinite, muscovite and paragonite) on feldspar surfaces. Therefore, these experiments have generated both solution chemistry and secondary mineral identity. The experimental results show that partial equilibrium was not attained between secondary minerals and aqueous solutions for the feldspar hydrolysis batch systems. Evidence came from both solution chemistry (supersaturation of the secondary minerals during the entire experimental duration) and metastable co-existence of secondary minerals. The slow precipitation of secondary minerals results in a negative feedback in the dissolution–precipitation loop, reducing the overall feldspar dissolution rates by orders of magnitude. Furthermore, the experimental data indicate the form of rate laws greatly influence the steady state rates under which feldspar dissolution took place. Negligence of both the mitigating effects of secondary mineral precipitation and the sigmoidal shape of rate–ΔG{sub r} relationship can overestimate the extent of feldspar dissolution during CO{sub 2} storage. Finally, the literature on feldspar dissolution in CO{sub 2}-charged systems has been reviewed. The data available are insufficient and new experiments are urgently needed to establish a database on feldspar dissolution mechanism, rates and rate laws, as well as secondary mineral information at CO{sub 2} storage conditions.

54 ENVIRONMENTAL SCIENCES↗

Effect of Microstructure of X-120 Steel on CO{sub 2} Corrosion Inhibition by 2-Mercaptobenzimidazole

The use of 2-mercaptobenzimidazole (2MBI) as corrosion inhibitor for API X-120 pipeline with two different microstructures in a CO{sub 2}-saturated 3.5% NaCl solution has been investigated. One microstructure was predominantly martensitic and bainitic (steel A), whereas the second one was mainly ferritic (steel B). It was found that 2MBI behaved as a mixed type of corrosion inhibitor and it changed the corrosion-controlled mechanism. In the uninhibited solution, steel A had a dissolution rate higher than steel B. However, in the presence of inhibitor, dissolution rate for steel A was lower than that for B because the film-formed inhibitor is adsorbed in a better way for steel A which has smaller precipitates distributed in a more homogeneous way than that for steel B.

36 MATERIALS SCIENCE↗

Direct measurements of 3d structure, chemistry and mass density during the induction period of C{sub 3}s hydration

The reasons for the start and end of the induction period of cement hydration remain a topic of controversy. One long-standing hypothesis is that a thin metastable hydrate forming on the surface of cement grains significantly reduces the particle dissolution rate; the eventual disappearance of this layer re-establishes higher dissolution rates at the beginning of the acceleration period. However, the importance, or even the existence, of this metastable layer has been questioned because it cannot be directly detected in most experiments. In this work, a combined analysis using nano-tomography and nano-X-ray fluorescence makes the direct imaging of early hydration products possible. These novel X-ray imaging techniques provide quantitative measurements of 3D structure, chemical composition, and mass density of the hydration products during the induction period. This work does not observe a low density product on the surface of the particle, but does provide insights into the formation of etch pits and the subsequent hydration products that fill them.

36 MATERIALS SCIENCE↗

Modeling the Sodium Recovery Resulting from Using Concentrated Caustic for Boehmite Dissolution

Boehmite dissolution experiments were conducted at NaOH concentrations of 10 M and 12 M to determine whether the increased aluminum solubility at high hydroxide concentration would offset the increase in added sodium, leading to an overall decrease in the amount of sodium added during the boehmite dissolution process. A shrinking-core dissolution rate model that assumed reversible reaction was used to fit the test data. The resulting model accounted for the effects of temperature, hydroxide concentration, and dissolved aluminum concentration. The rate was found to be dependent on the {approx}1.5 power of hydroxide molarity. When the dissolution rate model was used in simulations of batch boehmite dissolution, a concentration range of 7 to 9 M NaOH was found to minimize the mass of sodium needed to dissolve a given mass of aluminum, potentially reducing it by as much as two-thirds. The time required to dissolve the boehmite was also found to be decreased by using hydroxide concentrations greater than {approx}10 M.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical Dissolution of Simulant FCA Cladding and Plates

The Savannah River Site (SRS) has received some fast critical assembly (FCA) fuel from the Japan Atomic Energy Agency (JAEA) for disposition. Among the JAEA FCA fuel are approximately 7090 rectangular Stainless Steel clad fuel elements. Each element has an internal Pu-10.6Al alloy metal wafer. The thickness of each element is either 1/16 inch or 1/32 inch. The dimensions of each element ranges from 2 inches x 1 inch to 2 inches x 4 inches. This report discusses the potential chemical dissolution of the FCA clad material or stainless steel. This technology uses nitric acid-potassium fluoride (HNO 3 -KF) flowsheets of H-Canyon to dissolve the FCA elements from a rack of materials. Historically, dissolution flowsheets have aimed to maximize Pu dissolution rates while minimizing stainless steel dissolution (corrosion) rates. Because the FCA cladding is made of stainless steel, this work sought to accelerate stainless steel dissolution.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗