Search NASA⌕ Search

SEARCH · Search NASA

Results for “elemental segregation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Irradiation-induced segregation at dislocation loops in CoCrFeMnNi high entropy alloy

To understand the redistribution of alloying elements in high entropy alloys under irradiation, we irradiated a CoCrFeMnNi alloy with 1 MeV Kr ions at room temperature and at 500°C, and characterized with atom probe tomography and transmission electron microscopy. At 500°C, Co and Ni were enriched around the interstitial, faulted and perfect, dislocation loops resulted from the ion irradiation. In contrast, no segregation was observed at room temperature. The inverse Kirkendall effect through vacancy flux, as opposed to the interstitial binding mechanism, was the primary underlying process attributing to the observed segregation. In addition, a ring-shaped segregation pattern was observed at the faulted dislocation loops, indicating a non-equilibrium nature of the defect clustering and solute segregation process in CoCrFeMnNi under irradiation at high temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atom Probe Tomography Characterization of High-Dose Ion Irradiated MA957

This paper presents a comprehensive characterization study of the microstructural responses to ion irradiation of the oxide dispersion strengthened (ODS) ferritic alloy MA957 using atom probe tomography (APT). The MA957 specimens were irradiated by 1.8 MeV Cr3+ ions to doses and temperatures relevant to advanced fast reactors (100 and 500 dpa at 400-500 °C). The average sizes of the YTiO particles decreased slightly after irradiation at all temperatures, with the most pronounced change at 400 °C. The particle number densities for 400 and 500 °C were slightly below number densities for the unirradiated condition, while the values were slightly higher at 420 and 450 °C. This behavior is consistent with the Nelson-Hudson-Mazey rate theory model that considers the competing effects between recombination and dissolution. An increase in the Y/Ti ratio of the YTiO particles was observed at the two lower temperatures. The formation of Cr-rich precipitates (a') was observed in specimens irradiated at temperatures up to 450 °C. Irradiation-induced segregation on grain boundaries was also investigated. Grain boundary element concentration profiles and ion maps demonstrate differences among the irradiation temperatures, with most datasets differing from the unirradiated condition. A key focus of this ion irradiation study is the high-dose response, and this quantitative assessment revealed relatively small but distinct effects of irradiation on microstructure evolution. Overall, these results showing minor second phase evolution suggest that MA957 should retain mechanical performance generally well up to 500 dpa for the irradiation temperatures studied.

Wang, Jing↗
DOE OSTI2023

Thermodynamics and Kinetics of Refractory Multi-principal Element Alloys: An Experimental and Modeling Comparison

Here, the search for structural alloys capable of ultrahigh temperature performance has led to the exploration of refractory multi-principal element alloys (RMPEAs). In this work, experimental results for solidification segregation and homogenization of two RMPEAs, NbTaTiW and MoNbTaTi, are compared to simulations using the Scheil and DICTRA modules in Thermo-Calc®. Scheil calculations accurately predict the observed solidification segregation, while DICTRA predicts general trends and can provide a minimum time to achieve homogenization at a given temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The effect of 10 at.% Al addition on the hydrogen storage properties of the Ti 0.33 V 0.33 Nb 0.33 multi-principal element alloy

We report here a thorough study on the effect of 10 at.% Al addition into the ternary equimolar Ti 0.33 V 0.33 Nb 0.33 alloy on the hydrogen storage properties. Despite a decrease of the storage capacity by 20%, several other properties are enhanced by the presence of Al. The hydride formation is destabilized in the quaternary alloy as compared to the pristine ternary composition, as also confirmed by machine learning approach. The hydrogen desorption occurs at lower temperature in the Al-containing alloy relative to the initial material. Moreover, the Al presence improves the stability during hydrogen absorption/desorption cycling without significant loss of the capacity and phase segregation. Finally, this study proves that Al addition into multi-principal element alloys is a promising strategy for the design of novel materials for hydrogen storage.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The many faces of θ' -Al 2 Cu precipitates: Energetics of pristine and solute segregated Al/ θ' semi-coherent interfaces

θ'-Al 2 Cu precipitates in Al-Cu alloys have various distorted octagon shapes, which can be explained by the competition between {100} and {110} type semi-coherent interfaces with the Al matrix. While most prior studies on the semi-coherent Al/θ' interfaces have focused on the {100} orientation, little is known about the {110} interface. We have investigated the energetics of pristine and solute-segregated {110} semi-coherent Al/θ' interfaces with advanced characterization and first-principles studies. We report interfacial, strain, and solute segregation energetics of the {110} Al/θ' semi-coherent interface for 39 elements and compared them with previously reported values of the {100} interface. We discuss the atomic features and atomic local structures to identify similarities and differences between the two types of Al/θ' semi-coherent interfaces. Here, the isotropy in pristine Al/θ' semi-coherent interfacial energy and the anisotropy resulting from solute segregation provide insight into the formation of different types of θ' precipitate “faces” reported in the literature.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Powder spreading, densification, and part deformation in binder jetting additive manufacturing

Binder jetting additive manufacturing (AM) can print complex structures in economical and scalable manner. Binder jetting AM comprises of deposition and weak binding of particles, known as green part, at room temperature and subsequent binder removal and sintering densification at high temperatures. However, during the densification (i.e., sintering), the part significantly deforms due to volume shrinkage. The deformation during sintering is difficult to predict, which prevents the widespread application of this technology. In this research, powder spreading simulation using discrete element method (DEM) was performed first to capture local variations in powder bed configuration. Second, finite element method (FEM) with a phenomenological continuum constitutive model was used to predict part shrinkage during the sintering process. DEM simulation showed variations in packing density, particle segregation, formation of uneven powder bed surface, and shift in particle size distribution (PSD). The sintering simulation modeled part deformation with a reasonable accuracy of 3% for solid-state sintering and intermediate liquid phase sintering. A demonstration case with non-uniform initial packing density showed that inhomogeneous green part density and PSD should be accounted for prediction of part deformation in binder jetting AM.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Direct observation of strain-enhanced hydrogen segregation and failure at high-angle grain boundaries in nickel

Understanding the mechanisms underlying hydrogen embrittlement remains difficult, even in single-element metals. Both microstructure and stress state influence hydrogen distribution in metals and alloys, which impacts deformation and failure. Here, in this work, we use in-situ Kelvin probe force microscopy (KPFM) to monitor the hydrogen distribution in pure nickel over time at 1.1 % and 3.5 % strain. The sample strained to 3.5 % results in preferential hydrogen segregation to high-angle grain boundaries whereas the sample strained to 1.1 % does not exhibit preferential hydrogen segregation. Optical digital image correlation (DIC) shows that hydrogen charging results in both localized and reduced strains during tensile testing of a notched sample. Later stages of deformation and failure (e.g. microcracking) are studied by using in-situ transmission X-ray microscopy (TXM). TXM reveals nanoscale structural changes to a propagating crack in a hydrogen environment. Localized void growth and secondary cracking occur at grain boundaries near the primary crack front. Correlative electron backscattering diffraction (EBSD) is used to relate the cracking at grain boundaries to the hydrogen segregation observed in KPFM. These findings are unified in a proposed hydrogen embrittlement mechanism that describes the interaction of hydrogen with grain boundaries, and the role of grain boundaries in hydrogen embrittlement.

Grain boundary fracture↗
DOE OSTI2025

Tailoring Mechanical Properties of a Multi-Principle-Element Alloy by a Multi-Length-Scale Approach

A multiscale strengthening approach was employed to tailor the mechanical properties of a NiCoCr-based multi-principal element alloy (MPEA). Initially, the addition of Mo was utilized to strengthen the alloys by achieving grain size refinement, severe lattice distortion, and a reduction in stacking fault energy (SFE). Subsequently, the Suzuki segregation phenomenon was leveraged by carefully controlling stacking fault (SF) density via pre-straining and a subsequent 500°C heat treatment. Consequently, the Mo-added MPE alloys that were pre-strained and subsequently heat-treated exhibited a true yield stress of 2.3 GPa, with a corresponding fracture elongation of 12%. The Mo promotes complex SF interactions and the SFs formed during prior straining serve as sites for Suzuki segregation during subsequent heat treatment, varying the local SFE with Cr segregation, creating a roughened landscape and hindering dislocation dynamics. This multiscale strengthening approach presents a promising route for achieving desired mechanical properties in MPEAs.

mechanical properties↗
DOE OSTI2020

Effect of Particle Spreading Dynamics on Powder Bed Quality in Metal Additive Manufacturing

Powder spreading precedes creation of every new layer in powder bed additive manufacturing (AM). The powder spreading process can lead to powder layer defects such as porosity, poor surface roughness and particle segregation. Therefore, the creation of homogeneous layers is the first task for optimal part printing. Discrete element methods (DEM) powder spreading simulations are typically limited to a single layer and/or small number of particles. Therefore, results from such model configurations may not be generalized to multiple layer processes. In this study, a computationally efficient multi-layer powder spreading DEM simulation model is proposed. The model is calibrated experimentally using static Angle of Repose measurements. The adhesion model parameter, cohesive energy density is related to adhesive surface energy and strain energy release rate parameters. The model results show that interaction between particle and the powder spreading rake leads to noticeable variation in packing density, surface roughness, dynamic angle of repose (AOR), particle size distribution, and particle segregation. Finally, the powder model is experimentally validated using a recoater spreading rig to measure the dynamic AOR at spreading speeds consistent with recoating speeds and layer heights used in AM processes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Chemical order transitions within extended interfacial segregation zones in NbMoTaW

Interfacial segregation and chemical short-range ordering influence the behavior of grain boundaries in complex concentrated alloys. In this study, we use atomistic modeling of a NbMoTaW refractory complex concentrated alloy to provide insight into the interplay between these two phenomena. Hybrid Monte Carlo and molecular dynamics simulations are performed on columnar grain models to identify equilibrium grain boundary structures. Here our results reveal extended near-boundary segregation zones that are much larger than traditional segregation regions, which also exhibit chemical patterning that bridges the interfacial and grain interior regions. Furthermore, structural transitions pertaining to an A2-to-B2 transformation are observed within these extended segregation zones. Both grain size and temperature are found to significantly alter the widths of these regions. An analysis of chemical short-range order indicates that not all pairwise elemental interactions are affected by the presence of a grain boundary equally, as only a subset of elemental clustering types are more likely to reside near certain boundaries. The results emphasize the increased chemical complexity that is associated with near-boundary segregation zones and demonstrate the unique nature of interfacial segregation in complex concentrated alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Crystal Growth and Elemental Homogeneity of the Multicomponent Rare-Earth Garnet (Lu 1/6 Y 1/6 Ho 1/6 Dy 1/6 Tb 1/6 Gd 1/6 ) 3 Al 5 O 12

We report high-entropy aluminum garnets were grown as bulk single crystals using the micro-pulling-down method, taking the synthesis of complex ceramics a step further from the conventional preparation of polycrystalline materials. We studied the effects of growth parameters on the elemental distribution in high optical quality crystals of (Lu 1/6 Y 1/6 Ho 1/6 Dy 1/6 Tb 1/6 Gd 1/6 ) 3 Al 5 O 12 containing six cations (yttrium and rare-earths) taken in equimolar amounts. A single garnet structure was confirmed by powder X-ray diffraction. Electron microprobe measurements were obtained to correlate the radial distribution of rare-earth elements with pulling rates and molten zone height. The nature of the elemental distribution in the radial direction was associated with ionic radius: smaller rare-earths concentrated in the center of the crystal, while larger rare-earths segregated toward the outer edge of the cylindrical crystal. Faster pulling rates led to a flattening of the concentration profiles toward the nominal concentration, promoting a more homogeneous radial elemental distribution, while varying the molten zone height did not have a significant effect. The demonstrated success with crystal growth enables the practical availability of single crystals of multicomponent aluminum garnets for further discovery of new phenomena and applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural and chemical disorder enhance point defect diffusion and atomic transport in Ni 3 Al-based γ' phase

The ordered L1 2 γ' Ni 3 Al intermetallic inclusions are routinely used as strengthening constituents in Ni-based superalloys and recent high-entropy alloys. As there are different metallic elements relative to the alloy matrix, the composition of γ' phase inclusions usually suffers some variations. In this work, we studied the elemental partition and its influence on atomic transport properties in a model (NiCo) 3 Al γ' phase with chemical and structural disorder. Combining the Monte Carlo and molecular static techniques, we first determined the elemental distribution in such compositionally-complexed γ' phase. The results suggest that Co tends to segregate, which profoundly influences defect energetics and diffusion properties. By modeling thermally activated diffusion by molecular dynamics, we found that chemical disorder induced by Co can enhance vacancy diffusion while significantly suppress diffusion via interstitial atom migration, as compared to the stoichiometric γ' Ni 3 Al. We further reveal that these observations are closely related to the defect energetics in these systems. Furthermore, our results explain the effects of disorder, long- and short-range orders on the diffusion properties in multicomponent intermetallic alloys, which helps to understand the stability and, thus, γ'-phase-assisted strengthening at different conditions including annealing and irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Tailoring microstructures with mild magnetic-field processing: A case study of CuNiFe alloys

Combined experimental and computational investigations of the CuNiFe spinodal system confirm that application of a mild magnetic field during thermal treatment alters elemental redistribution and the resulting microstructure, relative to that obtained from zero-field annealing. Spinodal decomposition of a Cu 40 Ni 42 Fe 18 alloy was initiated during thermal treatment at 773 K, conducted either under zero field or modest (60 mT) magnetic f ield conditions for up to 200 h. Periodic (~10 nm) chemical modulations into Cu-rich and NiFe-rich regions were observed under both conditions, with the amplitude and wavelength of the segregated regions increasing with treatment time. However, magnetic field annealing resulted in a more than twofold increase in the amplitude of elemental modulations relative to zero-field conditions – consistent with enhanced diffusional f luxes during spinodal decomposition – while the modulation wavelength remained largely unaffected. These microstructural differences are reflected in various extrinsic magnetic properties. In parallel, first-principles DFT calculations indicate that long-range ferromagnetic order, as induced by an applied magnetic field, substantially alters the strength and nature of atomic interactions, enhancing the thermodynamic instability of the CuNiFe solid solution. Collectively, these results suggest that incorporating a mild (millitesla-level) magnetic field – distinct from the strong (tesla-level) fields commonly used in prior studies – during thermal processing has the potential to deliver enhanced control of microstructures for targeted engineering outcomes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Characteristics of the sub-micron ash aerosol generated during oxy-coal combustion at atmospheric and elevated pressures

This paper is concerned with the effect of pressure on the particle size distribution and the size-segregated composition of the sub-micron ash aerosol created during oxy-coal combustion under near practical self-sustaining combustion conditions. The problem is important because pressurized oxy-coal combustion has been proposed as one promising technology to minimize CO 2 emissions. Sub-micron ash plays a major role in ash deposition mechanisms, which, in turn, can control boiler performance. In this work, the same bituminous coal was burned at pressures of 1, 8 and 15 bar in O 2 /CO 2 environments. Here, tests employed a 100 kW (rated) oxy-fuel combustor (OFC) operated at atmospheric pressure (1 bar) and a 300 kW (rated) entrained-flow pressurized reactor (EFPR) at elevated pressures (8 and 15 bar). Although these tests were conducted under near practical combustion conditions, confounding effects of peak flame temperature variations were minimized for the 1 bar and 15 bar tests, allowing the role of elevated pressure to be isolated. For the EFPR tests, a specially designed sampling system was used to sample sub-micron ash aerosols from the pressurized combustor and is described in detail. Results showed that at the same peak temperature but higher pressure, the fractions of ash aerosol partitioned into the PM 0.6 and PM 1 size fractions were greatly diminished. Moreover, elevated pressures caused significant changes in the composition of the (size-segregated) sub-micron aerosol, especially in its alkali content, which increased significantly. Examination of fractions of each element that ended up in the sub-micron fume suggested that, at constant temperature, the effect of pressure on vaporization of semi-volatile metals was very different from that on the release into the gas phase of non-volatile metals and could not be explained by equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Poisson–Nernst–Planck Model of Ion Transport and Interface Segregation in Metal–Insulator–Semiconductor Structures and Solar Cells

A numerical model that describes the transport of mobile ionic species in metal–insulator–semiconductor (MIS) and photovoltaic (PV) devices subject to temperature and voltage stress is presented. The finite element method (FEM) is used to solve the Nernst–Planck equation while imposing Poisson's equation self-consistently as a restriction for the electrostatic potential. This allows the contribution of the ionic species to the potential to be taken into account. Using a variational formulation eases the implementation of diverse boundary conditions, including the incorporation of segregation kinetics at the device interfaces. Segregation across the dielectric–semiconductor interface is relevant to modeling the electronic device degradation in systems where contamination reaches the semiconductor. The model in closed systems with no-flux boundary conditions is validated first. In the limiting case of low contamination levels with respect to the gate bias, the FEM solution matches analytically derived approximations. Then, the implementation is broadened to include an open boundary at the dielectric–semiconductor interface to account for leakage of ions. The predicted time dependence of the flatband voltage in Na-contaminated MIS test structures agrees well with measurements. This model successfully captures the role of long-range ion transport at concentrations of relevance to electronic and PV device instability and neuromorphic computing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Aspects of rare earth element enrichment in Allegheny Plateau coals, Pennsylvania, USA

The Allegheny Plateau in western Pennsylvania, western Maryland, and northern West Virginia has relatively flat-lying strata with southwest-northeast-trending anticlines cored by splay faults originating from the thrust faults and southeast-northwest-trending lineaments. The lineaments define both the structural relief of the anticlines and the coal rank. Coal rank in the Pennsylvanian Allegheny Group coals is medium volatile bituminous in the region of less-prominent structural relief and low volatile bituminous in the region with more pronounced anticlines. Zinc and Cl exhibit high values in coals in the vicinity of the lineaments. Although coal rank was not a parameter in the Principal components analysis, the highest rank coals clustered together in a quadrant defined, in part, by the Zn concentration. Zinc was selected as a parameter due to its possible link with hydrothermal mineralization and Zr and TiO 2 /Al 2 O 3 were selected based on their presumed association with detrital mineral influences. The highest rare earths + Y values in benches of the Lower Kittanning coal were found at sites close to the lineaments. Negative or negligible Ce anomalies (δCe) and strongly positive Gd anomalies (δGd) suggest marine or hydrothermal influences and negative Eu anomalies (δEu) along with high TiO 2 /Al 2 O 3 values suggest a terrestrial input. In conclusion, the plots of δCe vs. δGd and δCe vs. δEu show that the low volatile bituminous coals are segregated from the other coals, suggesting that the factors that influenced coal rank also influenced the distribution of the rare earth elements.

58 GEOSCIENCES↗
DOE OSTI2025

Distinctive features of structural evolution and thermodynamic response in wide-bandgap semiconductors driven by intense electronic excitation

Radiation-tolerant material selection requires balancing lattice rigidity, defect dynamics, and electronic stability, as shown by covalent SiC outperforming ionic Ga 2 O 3 and GaN under extreme environments. Responding to intense electronic excitation, irradiation-driven phase segregation (β → δ/κ in Ga 2 O 3 ) and core–shell track (disordered structure in GaN), accompanied by elemental redistribution, contrastingly, exceptional radiation tolerance manifested by comparatively minimal lattice distortion (0.17 % strain variation) was demonstrated in SiC. These differential responses are primarily attributed to two fundamental mechanisms: (i) thermodynamic driving forces governing defect migration and phase separation, and (ii) the synergistic effects of robust covalent bonding composition coupled with efficient defect recombination processes. Here, the stronger electron–phonon (e-ph) coupling in Ga 2 O 3 (4.34 × 1018 W m −3 K −1 ) and GaN (3.55 × 10 18 W m −3 K −1 ) enhances lattice energy deposition, triggering thermal spikes (ΔT ≫ T m ) and structural transition behaviors, whereas weaker e-ph coupling in SiC (3.69 × 10 18 W m −3 K −1 ), relatively high thermodynamic parameters and efficient energy dissipation suppress thermal spikes to maintaining lattice integrity. The photoresponse degradation driven by enhanced radiative recombination is dominant in N-doped SiC, while V-doped systems achieve defect-mediated photoconduction optimization characterized by abrupt current transitions, matching fluorescence yield evolutions, and directly connecting defect engineering to optoelectronic performance.

Intense electronic excitation↗
DOE OSTI2023

Stepwise recombination suppression around the mating-type locus in an ascomycete fungus with self-fertile spores

Recombination is often suppressed at sex-determining loci in plants and animals, and at self-incompatibility or mating-type loci in plants and fungi. In fungal ascomycetes, recombination suppression around the mating-type locus is associated with pseudo-homothallism, i.e. the production of self-fertile dikaryotic sexual spores carrying the two opposite mating types. This has been well studied in two species complexes from different families of Sordariales: Podospora anserina and Neurospora tetrasperma. However, it is unclear whether this intriguing association holds in other species. We show here that Schizothecium tetrasporum, a fungus from a third family in the order Sordariales, also produces mostly self-fertile dikaryotic spores carrying the two opposite mating types. This was due to a high frequency of second meiotic division segregation at the mating-type locus, indicating the occurrence of a single and systematic crossing-over event between the mating-type locus and the centromere, as in P. anserina. The mating-type locus has the typical Sordariales organization, plus a MAT1-1-1 pseudogene in the MAT1-2 haplotype. High-quality genome assemblies of opposite mating types and segregation analyses revealed a suppression of recombination in a region of 1.47 Mb around the mating-type locus. We detected three evolutionary strata, indicating a stepwise extension of recombination suppression. The three strata displayed no rearrangement or transposable element accumulation but gene losses and gene disruptions were present, and precisely at the strata margins. Our findings indicate a convergent evolution of self-fertile dikaryotic sexual spores across multiple ascomycete fungi. The particular pattern of meiotic segregation at the mating-type locus was associated with recombination suppression around this locus, that had extended stepwise. This association between pseudo-homothallism and recombination suppression across lineages and the presence of gene disruption at the strata limits are consistent with a recently proposed mechanism of sheltering deleterious alleles to explain stepwise recombination suppression.

59 BASIC BIOLOGICAL SCIENCES↗