Search NASA⌕ Search

SEARCH · Search NASA

Results for “minimum scale length”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Nonlinear laser energy depletion in laser-plasma accelerators

Energy depletion of intense, short-pulse lasers via excitation of plasma waves is investigated numerically and analytically. The evolution of a resonant laser pulse proceeds in two phases. In the first phase, the pulse steepens, compresses, and frequency red-shifts as energy is deposited in the plasma. The second phase of evolution occurs after the pulse reaches a minimum length at which point the pulse rapidly lengthens, losing resonance with the plasma. Expressions for the rate of laser energy loss and rate of laser red-shifting are derived and are found to be in excellent agreement with the direct numerical solution of the laser field evolution coupled to the plasma response. Both processes are shown to have the same characteristic length-scale. In the high intensity limit, for nearly-resonant Gaussian laser pulses, this scale length is shown to be independent of laser intensity.

43 PARTICLE ACCELERATORS↗

Adding computationally efficient realism to Monte Carlo turbulence simulation

Frequently in aerospace vehicle flight simulation, random turbulence is generated using the assumption that the craft is small compared to the length scales of turbulence. The turbulence is presumed to vary only along the flight path of the vehicle but not across the vehicle span. The addition of the realism of three-dimensionality is a worthy goal, but any such attempt will not gain acceptance in the simulator community unless it is computationally efficient. A concept for adding three-dimensional realism with a minimum of computational complexity is presented. The concept involves the use of close rational approximations to irrational spectra and cross-spectra so that systems of stable, explicit difference equations can be used to generate the turbulence.

Campbell, C. W.↗

On the energetics of the solar supergranulation

Thermodynamic arguments demonstrate that kinetic energy dissipation must occur in the convection zone. The dissipation rate depends on the temperature gradient, which is at a minimum in the hydrogen ionization zone. As a result, the kinetic energy dissipation rate per density scale height shows a maximum just below the photosphere and another maximum beneath the ionization zone. It is proposed that intensified convection at these two levels is the explanation for the two distinct phenomena of granulation and supergranulation. The values of the scale heights at these maxima are consistent with the length scales of the granulation and the supergranulation. A moderate amount of a radial diffusion of kinetic energy does not alter this result.

Gierasch, P. J.↗

Use of Synthetic Aperture Radar (SAR) to Identify and Characterize Overwintering Areas of Fish in Ice-Covered Arctic RIvers: A Demonstration with Broad Whitefish and their Habitats in the Sagavanirktok River, Alaska

In northern climates, locating overwintering fish can be very challenging due to thick ice cover. Areas near the coast of the Beaufort Sea provide valuable overwintering habitat for both resident and anadromous fish species; identifying and understanding their use of overwintering areas is of special interest. Synthetic aperture radar (SAR) imagery from two spaceborne satellites was examined as an alternative to radiotelemetry for identifying anadromous fish overwintering. The presence of water and ice were sampled at 162 sites and fish were sampled at 16 of these sites. From SAR imagery alone, we successfully identified large pools inhabited by overwintering fish in the ice-covered Sagavanirktok River. In addition, the imagery was able to identify all of the larger pools (mean minimum length of 138m (range 15-470 m; SD=131)) of water located by field sampling. The effectiveness of SAR to identify these pools varied from 31% to 100%, depending on imagery polarization, the incidence angle range, and the orbit. Horizontal transmit–vertical receive (HV) polarization appeared best. The accuracy of SAR was also assessed at a finer pixel-by-pixel (30-m x30-m) scale. The best correspondence at this finer scale was obtained with an image having HV polarization. The levels of agreement ranged from 54% to 69%. The presence of broad whitefish (the only anadromous species present) was associated with salinity and pool size (estimated with SAR imagery); fish were more likely to be found in larger pools with low salinity. This research illustrates that SAR imaging has great potential for identifying under-ice overwintering areas of riverine fish. These techniques should allow managers to identify critical overwintering areas with relatively more ease and lower cost than traditional techniques.

54 ENVIRONMENTAL SCIENCES↗

Minimum length, extra dimensions, modified gravity and black hole remnants

We construct a Hilbert space representation of minimum-length deformed uncertainty relation in presence of extra dimensions. Following this construction, we study corrections to the gravitational potential (back reaction on gravity) with the use of correspondingly modified propagator in presence of two (spatial) extra dimensions. Interestingly enough, for r→0 the gravitational force approaches zero and the horizon for modified Schwarzschild-Tangherlini space-time disappears when the mass approaches quantum-gravity energy scale. This result points out to the existence of zero-temperature black hole remnants in ADD brane-world model.

79 ASTRONOMY AND ASTROPHYSICS↗

The flame structure and vorticity generated by a chemically reacting transverse jet

An analytical model describing the behavior of a turbulent fuel jet injected normally into a cross flow is developed. The model places particular emphasis on the contrarotating vortex pair associated with the jet, and predicts the flame length and shape based on entrainment of the oxidizer by the fuel jet. Effects of buoyancy and density variations in the flame are neglected in order to isolate the effects of large-scale mixing. The results are compared with a simulation of the transverse reacting jet in a liquid (acid-base) system. For a wide range of ratios of the cross flow to jet velocity, the model predicts flame length quite well. In particular, the observed transitional behavior in the flame length between cross-flow velocity to jet velocity of orifice ratios of 0.0 to 0.1, yielding an approximate minimum at the ratio 0.05, is reproduced very clearly by the present model. The transformation in flow structure that accounts for this minimum arises from the differing components of vorticity dominant in the near-field and far-field regions of the jet.

Karagozian, A. R.↗

Calculated viscous and scale effects on transonic aeroelasticity

A viscous-inviscid interactive coupling method is used for the computation of unsteady transonic flows. A lagextrainment integral boundary layer method is used with a transonic small disturbance potential code to compute the transonic aeroelastic response for two wing flutter models. By varying the modeled length scale, viscous effects may be studied as the Reynolds number per reference chordlength varies. Appropriate variation of modeled frequencies and generalized masses then allows comparison of responses for varying scales or Reynolds number. Two wing planforms are studied: one a four percent thick swept wing and the other a typical business jet wing. Calculations for both wings show limit cycle oscillations at transonic speeds in the vicinity of minimum flutter speed indices.

Edwards, John W.↗

Alfvén eigenmode stability and critical gradient energetic particle transport using the Trapped-Gyro-Landau-Fluid model

The Trapped-Gyro-Landau-Fluid (TGLF) transport model is a physically realistic and comprehensive theory based on a local quasilinear transport model fitted to linear and nonlinear GYRO gyrokinetic simulations [Staebler et al., Phys. Plasmas 14, 55909 (2007)]. This work presents the first use of the TGLF model to treat low-n Alfvén eigenmode (AE) stability and energetic particle (EP) transport. TGLF accurately recovers the local GYRO toroidicity-induced AE (TAE) and energetic particle mode (EPM) linear growth and frequency rates for a fusion alpha case. With a very high grid resolution, TGLF can quickly find the critical EP pressure gradient profile for stiff EP transport based on an AE linear threshold given the background thermal plasma profiles in DIII-D. The TGLF critical gradient profile using the recipe γ AE =0, that is the linear AE growth rate without additional driving rates from the background plasma gradients, matches the more expensive linear GYRO results with a single worst toroidal mode number n. TGLF can easily find the minimum critical gradient profile with testing multiple ns. From a database of runs using a newly developed TGLFEP code, a rough but insightful parametric “power law” scaling for critical EP beta is demonstrated. An important toroidal stabilization condition on the EP pressure gradient p EP /L$EP\atop{p}$ drive is isolated: R/L$EP\atop{p}$ > C R ~ 3, where L$EP\atop{p}$ is the EP pressure gradient length and R is the tokamak major radius. This paper also demonstrates that relaxation of the fixed slowing down EP profile shape approximation often used to find the critical EP density profile has little effect on the resulting EP transport. The single EP species critical gradient model is generalized to handle two EP species.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation and analysis of abrupt changes in the interplanetary plasma velocity and magnetic field.

This paper presents a limited study of the physical nature of abrupt changes in the interplanetary plasma velocity and magnetic field based on 19 day's data from the Pioneer 6 spacecraft. The period was chosen to include a high-velocity solar wind stream and low-velocity wind. Abrupt events were accepted for study if the sum of the energy density in the magnetic field and velocity changes was above a specified minimum. A statistical analysis of the events in the high-velocity solar wind stream shows that Alfvenic changes predominate. This conclusion is independent of whether steady state requirements are imposed on conditions before and after the event. Alfvenic changes do not dominate in the lower-speed wind. This study extends the plasma field evidence for outwardly propagating Alfvenic changes to time scales as small as 1 min (scale lengths on the order of 20,000 km).

Martin, R. N.↗

FastTree: Computing Large Minimum Evolution Trees with Profiles instead of a Distance Matrix

Gene families are growing rapidly, but standard methods for inferring phylogenies do not scale to alignments with over 10,000 sequences. We present FastTree, a method for constructing large phylogenies and for estimating their reliability. Instead of storing a distance matrix, FastTree stores sequence profiles of internal nodes in the tree. FastTree uses these profiles to implement Neighbor-Joining and uses heuristics to quickly identify candidate joins. FastTree then uses nearest neighbor interchanges to reduce the length of the tree. For an alignment with N sequences, L sites, and a different characters, a distance matrix requires O(N2) space and O(N2L) time, but FastTree requires just O(NLa+N √N) memory and O(N √N log(N)La) time. To estimate the tree’s reliability, FastTree uses local bootstrapping, which gives another 100-fold speedup over a distance matrix. For example, FastTree computed a tree and support values for 158,022 distinct 16S ribosomal RNAs in 17 h and 2.4 GB of memory. Just computing pairwise Jukes–Cantor distances and storing them, without inferring a tree or bootstrapping, would require 17 h and 50 GB of memory. In simulations, FastTree was slightly more accurate than Neighbor-Joining, BIONJ, or FastME; on genuine alignments, FastTree’s topologies had higher likelihoods. FastTree is available at http://microbesonline.org/fasttree.

59 BASIC BIOLOGICAL SCIENCES↗

Development of the Viking parachute configuration by wind tunnel investigation.

Several experimental investigations to obtain the drag performance of 10% scale-model disk-gap-band-type parachute assemblies trailing in the Viking forebody wake were conducted over the range of Mach 0.2 to 2.6. The wind-tunnel tests varied both the canopy trailing distance and ratio of suspension line length to canopy diameter. The data obtained permitted optimization of both parameters. Parachute drag performance in the forebody wake is markedly degraded transonically beginning at Mach 0.6, reaching a minimum value at Mach 1.0, then approaches the subsonic value for the selected configuration as Mach number is increased to 1.4. Further increase in Mach number causes the drag coefficient to again decline. A 20% increase in parachute-alone transonic drag coefficient was obtained by increasing suspension-line length ratio from 1.16 to 1.73.

Steinberg, S.↗

Enhancing phonon flow through one-dimensional interfaces by impedance matching

We extend concepts from microwave engineering to thermal interfaces and explore the principles of impedance matching in 1D. The extension is based on the generalization of acoustic impedance to nonlinear dispersions using the contact broadening matrix Γ(ω), extracted from the phonon self energy. For a single junction, we find that for coherent and incoherent phonons, the optimal thermal conductance occurs when the matching Γ(ω) equals the Geometric Mean of the contact broadenings. This criterion favors the transmission of both low and high frequency phonons by requiring that (1) the low frequency acoustic impedance of the junction matches that of the two contacts by minimizing the sum of interfacial resistances and (2) the cut-off frequency is near the minimum of the two contacts, thereby reducing the spillage of the states into the tunneling regime. For an ultimately scaled single atom/spring junction, the matching criterion transforms to the arithmetic mean for mass and the harmonic mean for spring constant. The matching can be further improved using a composite graded junction with an exponential varying broadening that functions like a broadband antireflection coating. There is, however, a trade off as the increased length of the interface brings in additional intrinsic sources of scattering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Performance predictions of a focused ion beam from a laser cooled and compressed atomic beam

Focused ion beams are indispensable tools in the semiconductor industry because of their ability to image and modify structures at the nanometer length scale. Here, we report on performance predictions of a new type of focused ion beam based on photo-ionization of a laser cooled and compressed atomic beam. Particle tracing simulations are performed to investigate the effects of disorder-induced heating after ionization in a large electric field. They lead to a constraint on this electric field strength which is used as input for an analytical model which predicts the minimum attainable spot size as a function of, amongst others, the flux density of the atomic beam, the temperature of this beam, and the total current. At low currents (I < 10 pA), the spot size will be limited by a combination of spherical aberration and brightness, while at higher currents, this is a combination of chromatic aberration and brightness. It is expected that a nanometer size spot is possible at a current of 1 pA. The analytical model was verified with particle tracing simulations of a complete focused ion beam setup. A genetic algorithm was used to find the optimum acceleration electric field as a function of the current. At low currents, the result agrees well with the analytical model, while at higher currents, the spot sizes found are even lower due to effects that are not taken into account in the analytical model.

43 PARTICLE ACCELERATORS↗

Did LMC X-3 Undergo a 'Her X-1-like' Anomalous Low State?

The black hole X-ray binary LMC X-3 has been monitored by the Rossi X-ray Timing Explorer (RXTE) from its launch to the present by the All-Sky Monitor (ASM). This well-sampled light curve is supplemented by frequent pointed observations with the PCA and HEXTE instruments which provide improved sensitivity, time resolution and spectral information. The long-term X-ray luminosity of the system is strongly modulated on timescales of hundreds of days. The mean 2-10 kev X-ray flux varies by a factor of more than 100 during this long-term cycle. This variability has been attributed to the precession of a bright, tilted, and warped accretion disk---the mechanism also invoked to explain the 35-day super-orbital period in the X-ray binary pulsar system Her X-1. The ASM light curve displays a unique episode, starting in December 2003, during which LMC X-3 displayed a very low, nearly constant flux, for about 80 days. This is markedly different from the typical low-flux excursions in LMC X-3, which smoothly evolve toward and then away from a minimum flux on about a 10-day time scale. The character of the long-term variability, as measured by amplitude and characteristic time scale, is not the same after this long low state as it was before. Similar shifts in long-term period and amplitude are seen after the so-called "anomalous low states" in Her X-1, when the 35-day X-ray modulation ceases for an unpredictable length of time. These similar shifts in the long-term amplitude and timescale in the two systems suggests they share a similar mechanism which gives rise to the anomalous low states

Boyd, Patricia t.↗

Development of process parameters for 22 nm PMOS using 2-D analytical modeling

The complementary metal-oxide-semiconductor field effect transistor (CMOSFET) has become major challenge to scaling and integration. Innovation in transistor structures and integration of novel materials are necessary to sustain this performance trend. CMOS variability in the scaling technology becoming very important concern due to limitation of process control; over statistically variability related to the fundamental discreteness and materials. Minimizing the transistor variation through technology optimization and ensuring robust product functionality and performance is the major issue.In this article, the continuation study on process parameters variations is extended and delivered thoroughly in order to achieve a minimum leakage current (I{sub LEAK}) on PMOS planar transistor at 22 nm gate length. Several device parameters are varies significantly using Taguchi method to predict the optimum combination of process parameters fabrication. A combination of high permittivity material (high-k) and metal gate are utilized accordingly as gate structure where the materials include titanium dioxide (TiO{sub 2}) and tungsten silicide (WSi{sub x}). Then the L9 of the Taguchi Orthogonal array is used to analyze the device simulation where the results of signal-to-noise ratio (SNR) of Smaller-the-Better (STB) scheme are studied through the percentage influences of the process parameters. This is to achieve a minimum I{sub LEAK} where the maximum predicted I{sub LEAK} value by International Technology Roadmap for Semiconductors (ITRS) 2011 is said to should not above 100 nA/µm. Final results shows that the compensation implantation dose acts as the dominant factor with 68.49% contribution in lowering the device’s leakage current. The absolute process parameters combination results in I{sub LEAK} mean value of 3.96821 nA/µm where is far lower than the predicted value.

36 MATERIALS SCIENCE↗

On the large eddy simulation of turbulent flows in complex geometry

Application of the method of Large Eddy Simulation (LES) to a turbulent flow consists of three separate steps. First, a filtering operation is performed on the Navier-Stokes equations to remove the small spatial scales. The resulting equations that describe the space time evolution of the 'large eddies' contain the subgrid-scale (sgs) stress tensor that describes the effect of the unresolved small scales on the resolved scales. The second step is the replacement of the sgs stress tensor by some expression involving the large scales - this is the problem of 'subgrid-scale modeling'. The final step is the numerical simulation of the resulting 'closed' equations for the large scale fields on a grid small enough to resolve the smallest of the large eddies, but still much larger than the fine scale structures at the Kolmogorov length. In dividing a turbulent flow field into 'large' and 'small' eddies, one presumes that a cut-off length delta can be sensibly chosen such that all fluctuations on a scale larger than delta are 'large eddies' and the remainder constitute the 'small scale' fluctuations. Typically, delta would be a length scale characterizing the smallest structures of interest in the flow. In an inhomogeneous flow, the 'sensible choice' for delta may vary significantly over the flow domain. For example, in a wall bounded turbulent flow, most statistical averages of interest vary much more rapidly with position near the wall than far away from it. Further, there are dynamically important organized structures near the wall on a scale much smaller than the boundary layer thickness. Therefore, the minimum size of eddies that need to be resolved is smaller near the wall. In general, for the LES of inhomogeneous flows, the width of the filtering kernel delta must be considered to be a function of position. If a filtering operation with a nonuniform filter width is performed on the Navier-Stokes equations, one does not in general get the standard large eddy equations. The complication is caused by the fact that a filtering operation with a nonuniform filter width in general does not commute with the operation of differentiation. This is one of the issues that we have looked at in detail as it is basic to any attempt at applying LES to complex geometry flows. Our principal findings are summarized.

Ghosal, Sandip↗

Coupling computational fluid dynamics with the high resolution rapid refresh model for forecasting dynamic line ratings

This study looks at forecasted dynamic line ratings in southern Idaho by using data from the High Resolution Rapid Refresh (HRRR) model for forecasted weather conditions. The HRRR model can provide accurate 18- hour forecasts with a 15-minute temporal resolution. Typical static ratings used for over head transmission lines use overly conservative assumptions for local weather conditions, such as using the maximum solar irradiance or temperature measured during the summer combined with low wind speed for an entire season. The HRRR forecast model used here has a high spatial resolution to provide local forecast conditions along the entire length of a transmission line. The area that is of interest in this study is in southern Idaho spanning a total of 15,000 square kilometers. The forecasted weather data is coupled with a computational fluid dynamics model of the wind in the region to improve the resolution to an even finer scale for resolving local convective cooling rates on each individual transmission line midpoint span. This high fidelity approach can be used to find the minimum ampacity limit across all given midpoints of a transmission line to determine the absolute minimum to be used for the line rating. The ability to increase the line rating above the conservative static approach with the forecasted weather data provides a large potential to alleviate congestion and provide data for the utility market transactions. Furthermore, this study shows that for the region of interest, using forecasted weather data coupled with CFD modeling will calculate DLR ampacity rating above static about 90% of the time, with only a small relative error in the forecasted ampacity over time.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Color Ultrafast Photography Study of a High-Current Discharge Initiated by Exploding a Short Wire in the Atmosphere

In this paper, we describe the ultrafast slit-scanning photography of light phenomena arising at the stage of the electrical breakdown in the atmosphere and in a channel initiated by a wire explosion. The characteristics and features of the photographic registration of the SFR-1 camera using color and spectrozonal negative aerial films sensitive in the visible and near infrared regions of the optical spectrum are presented. Using photograms in color, we were able to visualize small-scale inhomogeneities, a current-carrying channel and its “shell,” emissions of matter, and shock waves in the plasma. This technique made it possible to record a secondary shock wave in the plasma on the discharge axis during the explosion of short (length ≈15 mm) copper and nichrome wires with a diameter of 100–150 μm at a stored energy of ~100 J. At the moment of cumulation in the plasma, a “hot spot” with a minimum size of ~0.5 mm was formed on the discharge axis. It may be the source of narrow-beam coherent radiation with X-ray photon energies of 10–30 keV. The cumulation mechanism is discussed based on the regularities of the z-pinch phenomenon in a discharge initiated by a wire explosion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗