SEARCH · Search NASA
Results for “nmr probes”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Two-bond 13 C– 13 C spin-coupling constants in saccharides: dependencies on exocyclic hydroxyl group conformation
Seven doubly 13 C-labeled isotopomers of methyl β-D-glucopyranoside, methyl β-D-xylopyranoside, methyl β-D-galactopyranoside, methyl β-D-galactopyranosyl-(1→4)-β-D-glucopyranoside and methyl β-D-galactopyranosyl-(1→4)-β-D-xylopyranoside were prepared, crystallized, and studied by single-crystal X-ray crystallography and solid-state 13 C NMR spectroscopy to determine experimentally the dependence of 2 J C1,C3 values in aldopyranosyl rings on the C1–C2–O2–H torsion angle, θ 2 , involving the C2 carbon of the C1–C2–C3 coupling pathway. Using X-ray crystal structures to determine θ 2 in crystalline samples and by selecting compounds that exhibit a relatively wide range of θ 2 values in the crystalline state, 2 J C1,C3 values measured in crystalline samples were plotted against θ 2 and the resulting plot compared to that obtained from density functional theory (DFT) calculations. For θ 2 values ranging from ~90° to ~240°, very good agreement was observed between the experimental and theoretical plots, providing strong validation of DFT-calculated spin-coupling dependencies on exocyclic C–O bond conformation involving the central carbon of geminal C–C–C coupling pathways. we report that these findings provide new experimental evidence supporting the use of 2 J CCC values as non-conventional spin-coupling constraints in MA'AT conformational modeling of saccharides in solution, and the use of NMR spin-couplings not involving coupled hydroxyl hydrogens as indirect probes of C–O bond conformation. Solvomorphism was observed in crystalline βGal-(1→4)-βGlcOCH 3 wherein the previously-reported methanol solvate form was found to spontaneously convert to a monohydrate upon air-drying, leading to small but discernible conformational changes in, and a new crystalline form of, this disaccharide.
EXAFS investigations of temperature-dependent structure in cobalt-59 molecular NMR thermometers
Cobalt-59 nuclei are known for extremely thermally sensitive chemical shifts (δ), which in the long term could yield novel magnetic resonance thermometers for bioimaging applications. In this manuscript, we apply extended X-ray absorption fine structure (EXAFS) spectroscopy for the first time to probe the exact variations in physical structure that produce the exceptional thermal sensitivity of the 59 Co NMR chemical shift. We apply this spectroscopic technique to five Co(III) complexes: [Co(NH3)6]Cl3 (1), [Co(en) 3 ]Cl 3 (2) (en = ethylenediamine), [Co(tn) 3 ]Cl 3 (3) (tn = trimethylenediamine), [Co(tame) 2 ]Cl 3 (4) (tame = 1,1,1-tris(aminomethyl)ethane), and [Co(diNOsar)]Cl 3 (5) (diNOsar = dinitrosarcophagine). The solution-phase EXAFS data reveal increasing Co–N bond distances for these aqueous complexes over a ~50 °C temperature window, expanding by Δr (Co–N) = 0.0256(6) Å, 0.0020(5) Å, 0.0084(5) Å, 0.0006(5) Å, and 0.0075(6) Å for 1–5, respectively. Computational analyses of the structural changes reveal that increased connectivity between the donor atoms encourages complex structural variations. Finally, these results imply that rich temperature-dependent structural variations define 59 Co NMR thermometry in macrocyclic complexes.
Structure-Activity Relationships of Hydrothermally Aged Titania-Supported Vanadium-Tungsten Oxide Catalysts for SCR of NOx Emissions with NH3
Supported V2O5-WO3/TiO2 materials employed as selective catalytic reduction (SCR) catalysts for NOx emission control from power plants. Fresh SCR catalysts usually receive exposure to harsh treatments in industry to accelerate catalyst activation (calcination in air at 650oC) and catalyst aging (hydrothermal aging at 650oC) in a way that represents various points in the catalyst/product lifetime. The present study investigates the catalyst structural and chemical changes occurring during such harsh treatments. Three series of supported V2O5-WO3/TiO2 catalysts were prepared by incipient-wetness impregnation of aqueous ammonium metavanadate and metatungstate precursors. The catalysts were subsequently dried and calcined at 550oC in O2, 650oC in O2, and hydrothermal conditions (10% O2, 8% H2O, 7% CO2 and 75% N2) at 650oC. The resulting catalysts were physically characterized by numerous techniques (in situ Raman, in situ IR, in situ High Field-High Spinning solid-state 51V MAS NMR, in situ EPR, XRD, BET surface area and ICP) and chemically probed with adsorbed ammonia, SCR-TPSR, and the SCR reaction. The surface WOx sites on the TiO2 support behave as a textural promoter that stabilizes the TiO2 (anatase) phase from sintering and transforming to the undesirable crystalline TiO2 (rutile) phase that can lead to formation of a Ti1-xVxO2 (rutile) solid solution with reduced V4+ cations (~7-15%). The surface VOx sites are mostly oligomerized as surface V+5Ox sites (~50-85% oligomers) and the extent of oligomerization tends to increase with surface WOx coverage and calcination temperature. A major difference between the calcined and hydrothermally treated catalysts was the low concentration of surface NH3* species on Lewis acid sites for the hydrothermally treated catalysts, yet the SCR activity was almost comparable for both catalysts. This finding suggests that surface NH4+*, primarily associated with the surface VOx sites, are able to efficiently perform the SCR reaction. Given that multiple catalyst parameters were simultaneously varying during these treatments, it was difficult to correlate the SCR activity with any single catalyst parameter. A correlation, however, was found between the SCR TOF/activity and the sum of the surface NH3* and NH4+* species, which is dominated by the surface NH4+* species.
Dataset_for_Conserved_macromolecular_architecture_of_Poplar_secondary_cell_walls_revealed_by_ssNMR_and_atomistic_modeling
This dataset contains solid-state 13C NMR data and atomistic molecular dynamics simulation files supporting the study of nanoscale secondary cell wall architecture across 13 genetically diverse Populus trichocarpa genotypes grown under uniform greenhouse conditions in 13C-enriched CO2 atmospheres (~89% 13C enrichment).The dataset contains two collections of solid-state 13C NMR data. (1) 200 MHz data (Bruker Avance III HD, 4 mm HX probe, 10 kHz MAS): raw Bruker TopSpin experiment folders and DMFIT-exported ascii spectra for selective and non-selective 1D 13C-13C spin diffusion experiments (3000 ms mixing) used to quantify inter-polymer spatial proximities, and short-mixing (1 ms) reference spectra used for polymeric abundance quantification by spectral deconvolution. (2) 600 MHz data (Bruker Avance III, 1.6 mm PhoenixNMR HXY probe, 30 kHz MAS): raw Bruker TopSpin experiment folders containing 2D CORD, 2D CP-INADEQUATE, and 13C/1H relaxation (T1, T1rho) experiments for all 13 genotypes, with processed Excel workbooks per experiment type. Molecular dynamics simulation code, coordinate files, and analysis scripts (NAMD/CHARMM/Python) for six atomistic cell wall models are included. Summarized ssNMR data are compiled into a single excel file and subjected to statistical analysis. Multivariate analysis code (PCA, Pearson correlation) and summary data are provided as excel worksheets and Jupyter notebooks (Python 3).
Metal–Organic Framework-Based Microfluidic Impedance Sensor Platform for Ultrasensitive Detection of Perfluorooctanesulfonate
The growing global concerns to public health from human exposure to perfluorooctanesulfonate (PFOS) requires rapid, sensitive, in-situ detection where current, state-of-the-art techniques are yet to adequately meet sensitivity and selectivity standards of the real-world. This work presents, for the first time, a synergistic approach for the targeted affinity-based capture of PFOS using a porous sorbent probe that enhances detection sensitivity by embedding it on a microfluidic conductive platform. This novel sorbent-containing platform functions as an electrochemical sensor to directly measure PFOS concentration through a proportional change in electrical response (increase in impedance). The extremely high surface area and pore volume of mesoporous metal-organic framework (MOF) Cr-MIL-101 is used as the probe for targeted PFOS capture based on the affinity of the chromium center towards both the fluorine tail groups as well as the sulfonate functionalities as demonstrated by spectroscopic (NMR and XPS) and microscopic (TEM) studies. Answering the need for an ultrasensitive PFOS detection technique, we are embedding these MOF capture probes inside a microfluidic channel, sandwiched between interdigitated microelectrodes (IDµE). The nanoporous geometry increases the signal to noise ratio of interdigitated microelectrodes tremendously increasing sensitivity; this in combination with the ability of the capture probes to interact with the PFOS at the molecular level and effectively transduce that response electrochemically has allowed us achieve a PFOS detection limit of 0.5 ng/L, which is unprecedented for in-situ analytical PFOS sensors and even comparable to quantification limits achieved using state-of-the-art ex situ techniques.
Automatic fitting of multiple-field solid-state NMR spectra
The NMR lineshapes produced by half-integer quadrupolar nuclei are sensitive to 11 distinct fit parameters per inequivalent site. To date, automatic fitting routines have failed to replace manual parameter insertion and evaluation due to the importance of local minima and the need for fitting multiple-field magic-angle spinning (MAS) and static spectra simultaneously. Herein we introduce a new tool, AMES-Fit (Automatic Multiple Experiment Simulation and Fitting), to automatically find the global best-fit simulation parameters for a series of multiple-field NMR lineshapes. AMES-Fit uses an adaptive step size random search algorithm to dynamically probe parameter space and requires minimal human input. Importantly, the best fits are obtained in a few minutes of computation time that would otherwise have required several person-hours of work. The program is freely available and open-source.
Understanding the Role of Hydroxyl Functionalization in Linear Poly(Ethylenimine) for Oxidation‐Resistant Direct Air Capture of CO 2
Aminopolymer-based adsorbents are a prominent class of materials being used for direct air capture of CO 2 at the industrial scale. However, improving their working lifetime, specifically by increasing their resilience to oxidative degradation, remains an ongoing challenge. Toward this end, functionalization of aminopolymers with non-amine functionalities such as hydroxyls has emerged in recent years as a promising strategy toward improving adsorbent lifetime. Although there is a growing body of work demonstrating the effectiveness of this approach and investigating the origin of this improved stability, studies to date have primarily focused on branched aminopolymer systems such as branched poly(ethylenimine). In this work, hydroxyl-functionalized linear poly(ethylenimine) is used to continue to probe the underlying protective mechanism of this strategy. A combination of thermogravimetric analysis, NMR relaxometry, differential scanning calorimetry, and computational simulations is used to better understand the relationship between the extent of chemical functionalization, physical properties, and adsorbent performance.
Anionic Effects on Concentrated Aqueous Lithium Ion Dynamics
In this article, the structural dynamics, chemical reactivity, anisotropy, diffusivity, viscosity, and density were measured for concentrated lithium salt solutions, including lithium chloride (LiCl), lithium bromide (LiBr), lithium nitrite (LiNO 2 ), and lithium nitrate (LiNO 3 ), with methyl thiocyanate as an infrared vibrational probe molecule, using two-dimensional infrared spectroscopy (2D IR), nuclear magnetic resonance (NMR) spectroscopy, and viscometry. 2D IR, NMR, and viscosity results show that LiNO 2 exhibits longer correlation times, lower diffusivity, and nearly four times greater viscosity when compared to the other lithium salt solutions of the same concentration, suggesting that nitrite anions may strongly facilitate structure formation via strengthening water-ion interactions, directly impacting bulk solution properties at sufficiently high concentrations. Additionally, the LiNO 2 and LiNO 3 solutions show significantly reduced chemical reactivity with respect to lithium cations coordinating with the methyl thiocyanate when compared to the lithium halide salts.
A pulsed current-mode class-D low-voltage high-bandwidth power amplifier for portable NMR systems
Low-field NMR has seen growing interest in recent years, especially for portable applications. The lower homogeneity magnets used for portable applications require short RF pulses to ensure enough transmit bandwidth to excite the sample volume and also support short echo periods. Furthermore, the preferred use of a high-Q coil to improve signal-to-noise ratio (SNR) prolongs the pulse transients. Thus, at such low Larmor frequencies, the excitation pulse transients become comparable or longer than the pulse length, such that the transmit bandwidth begins to limit measurement SNR. This paper describes the design of a pulsed current-mode class-D power (PCMCD) transmitter that addresses this issue by generating high power in a tuned sample coil while maintaining short transients, thus resulting in high output bandwidth. The transmitter also uses a charge recycling mechanism to maximize power efficiency for RF train excitation, which also results in faster pulse repetition rate and reduces allowable echo time. In this work, experimental results from a small form-factor PCMCD transmitter are presented. This design generates a peak RF power of 240 W into a 9.16 µH coil at 4 MHz while operating off a single 12 V power supply. NMR measurement results using the transmitter are also described, showing minimum achievable echo time of 70 µs and 25 µs depending on the transmitter mode of operation.
Long-range coupling in cyclic silanes
We report the synthesis of a mixed methyl- and hydro-substituted cyclosilane (1) possessing cis/trans stereoisomerism. Each diastereomer of 1 possesses distinct symmetry elements (cis-1: Cs-symmetric; trans-1: C 2 -symmetric). Cyclosilane 1 is a model system to probe configuration- and conformation-dependent long-range proton–proton coupling. Here, extensive NMR spectroscopic characterization is reported, including one-dimensional 1 H NMR and 29 Si DEPT and INEPT+ spectra and two-dimensional 1 H– 29 Si and 1 H– 1 H correlated spectroscopy (HSQC, HMBC, COSY). On the basis of these experiments, molecular connectivity consistent with four-bond 1 H– 1 H coupling is confirmed.
Probe for operando in situ electrochemical nuclear magnetic resonance spectroscopy
Electrochemical devices with metal casings have been considered incompatible with nuclear magnetic resonance (NMR) spectroscopy because the oscillating magnetic fields (“rf fields”) responsible for excitation and detection of NMR active nuclei do not penetrate metals. According to the present invention, rf fields can still efficiently penetrate into nonmetallic layers of electrochemical cells (such as a coin cell battery configuration) provided the magnetic field is oriented tangentially to the electrochemical cell electrodes in a “skimming” orientation. As an example, noninvasive high field in situ 7Li and 19F NMR of an unmodified commercial off-the-shelf rechargeable coin cell was demonstrated using a traditional external NMR coil setup. The in operando NMR measurements revealed that irreversible physical changes accumulate at the anode during electrochemical cycling.
Detecting impurity-specific effects on structure and radiolytic hydrogen production in aluminum hydroxide
While radiolytic hydrogen (H 2 ) generation is an intrinsic property of aqueous and mineral radiolysis in nuclear waste systems, detection of the sub-ns events leading to H 2 generation is challenging. Interfacial processes involving key mineral phases in the sludge, e.g., gibbsite (α-Al(OH) 3 ), have been implicated, with impurities affecting the amount of H 2 generated. To understand why gibbsite synthesized from nitrate precursors produces less H 2 than gibbsite from chloride precursors, we paired 27 Al multiple quantum magic angle spinning (MQMAS) NMR spectroscopy to determine structural heterogeneity with transverse-field muon spin rotation (TF-μSR) to probe electron availability. MQMAS revealed greater structural disorder in the gibbsite synthesized with nitrate (NO 3 -gibbsite). Correspondingly, TF-μSR showed a larger diamagnetic fraction for NO 3 -gibbsite, indicating reduced persistence of μ + -electron bound states (muonium or other radicals) and thus fewer electrons available for reaction on the sub-ns timescale. This establishes a correlation between impurity-induced disorder and electron loss. The diamagnetic fraction serves as a signature for these sub-ns events, as it provides a key constraint for predictive models without currently resolving whether the electron is lost to direct chemical scavenging or trapping at lattice defects.
High-accuracy absolute magnetometry with application to the Fermilab Muon g-2 experiment
We present details of a high-accuracy absolute scalar magnetometer based on pulsed proton NMR. The B-field magnitude is determined from the precession frequency of proton spins in a cylindrical sample of water after accounting for field perturbations from probe materials, sample shape, and other corrections. Features of the design, testing procedures, and corrections necessary for qualification as an absolute scalar magnetometer are described. The device was tested at B = 1.45 T but can be modified for a range exceeding 1–3 T. The magnetometer was used to calibrate other NMR magnetometers and measure absolute magnetic field magnitudes to an accuracy of 19 parts per billion as part of a measurement of the muon magnetic moment anomaly at Fermilab.
Dataset_for_Molecular_Motion_Below_the_Glass_Transition_A_Solid-State_NMR_Study_of_Siloxane_Polymer_Dynamics Study
This dataset contains solid-state 1H and 13C NMR relaxometry data, differential scanning calorimetry (DSC) data, and size exclusion chromatography (SEC/GPC) data supporting the study of sub-glass-transition (sub-Tg) molecular dynamics in a composition- and sequence-controlled series of diphenyl-substituted polysiloxanes (PDMS, 14Ph, 33Ph, 50Ph, 67Ph, and 100Ph; 0–100% diphenylsiloxane content by mole).All solid-state NMR data were acquired on a 200 MHz Bruker Avance III HD spectrometer using a static 7 mm HX probe or a 4 mm HX probe under 4 kHz magic-angle spinning. Raw Bruker TopSpin experiment folders are included for: (1) variable-temperature 1H lineshape measurements used to determine linewidth (FWHM) as a function of temperature across the glass transition; (2) 1H T1 (saturation recovery with solid-echo detection), probing nanosecond-scale dynamics near the 1H Larmor frequency; (3) 1H T1rho (direct spin-lock, 62.5 kHz), probing microsecond-scale segmental dynamics; (4) 13C-detected Lee–Goldburg cross-polarization 1H T1rho (LGCPH T1rho) for 33Ph and 50Ph, resolving aromatic and aliphatic proton environments; and (5) 13C T1 relaxation for 33Ph and 50Ph. Differential scanning calorimetry data (TA Instruments DSC 25, −150 to +120 °C, up to +300 °C for 100Ph, 10 °C/min) are included for all six compositions and support the glass-transition temperatures in Table 1 and Figure 1. Size exclusion chromatography data (Agilent 1200 Series, PL-Gel 300 mixed-C column, THF mobile phase, polystyrene calibration standards) are included for the three synthesized copolymers (33Ph, 50Ph, 67Ph) and support the number-average molecular weights in Table 1. Processed data include per-composition relaxation-time summaries (Excel), curve-fitting and Bloembergen-Purcell-Pound (BPP) model analysis notebooks (Jupyter/Python), and Igor Pro (.pxp) master files used to generate the manuscript's figures.
Organophosphorus Binding Thermodynamics in Metal–Organic Frameworks: Interplay between Oxidation State, Lewis Acidity, and Node Structure
Organophosphorus compounds, including nerve agents and pesticides, represent a class of toxic chemicals causing harm to troops, civilians, and the environment. Metal–organic frameworks (MOFs) have emerged as a class of highly porous, crystalline, tunable materials adept at both capturing and catalytically neutralizing these harmful toxins. In particular, MOFs whose nodes display strong Lewis acidic character can hydrolyze such chemicals nearly instantaneously. However, without the help of a basic buffer to regenerate the active site, the benign organophosphorus product strongly binds to the node and prevents catalyst turnover. Here, we investigate a series of MOFs whose nodes contain metals of varying Lewis acidities and employ isothermal titration calorimetry (ITC) to directly measure the heat from the binding of an organophosphorus probe molecule, allowing the construction of a full thermodynamic binding profile (ΔH, ΔS, ΔG, K a ). We couple this with potentiometric titrations and solid state 31 P magic angle spinning (MAS) NMR to gain a clearer picture of how node identity, structure, and Lewis acidity interplay to impact binding strength and favorability. Furthermore, this study is the first to integrate these three complementary techniques to investigate binding interactions in MOFs, further showcasing the viability of ITC for probing MOF systems, which is still relatively underexplored.
Th IV –Desferrioxamine: characterization of a fluorescent bacterial probe
Diversifying our ability to guard against emerging pathogenic threats is essential for keeping pace with global health challenges, including those presented by drug-resistant bacteria. Some modern diagnostic and therapeutic innovations to address this challenge focus on targeting methods that exploit bacterial nutrient sequestration pathways, such as the desferrioxamine (DFO) siderophore used by Staphylococcus aureus (S. aureus) to sequester Fe III . Building on recent studies that have shown DFO to be a versatile vehicle for chemical delivery, we show proof-of-principle that the Fe III sequestration pathway can be used to deliver a potential radiotherapeutic. Our approach replaces the FeIII nutrient sequestered by H 4 DFO + with Th IV and made use of a common fluorophore, FITC, which we covalently bonded to DFO to provide a combinatorial probe for simultaneous chelation paired with imaging and spectroscopy, H 3 DFO_FITC. Combining insight provided from FITC-based imaging with characterization by NMR spectroscopy, we demonstrated that the fluorescent DFO_FITC conjugate retained the Th IV chelation properties of native H4DFO+. Fluorescence microscopy with both [Th(DFO_FITC)] and [Fe(DFO_FITC)] complexes showed similar uptake by S. aureus and increased intercellular accumulation as compared to the FITC and unchelated H 3 DFO_FITC controls. Collectively, these results demonstrate the potential for the newly developed H 3 DFO_FITC conjugate to be used as a targeting vector and bacterial imaging probe for S. aureus. The results presented within provide a framework to expand H 4 DFO + and H 3 DFO_FITC to relevant radiotherapeutics (like 227Th).
Cellulose crystallinity index (CrI) of switchgrass measured by solid-state NMR
Here we present a curated dataset of switchgrass cellulose crystallinity index (CrI) measured using solid state nuclear magnetic resonance (NMR) spectroscopy. Seventy-two topline switchgrass lines grown in greenhouse were collected and ground to -20/+80 mesh. The switchgrass was then Soxhlet-extracted with toluene/ethanol for 24 h to remove extractives. The extractives-free switchgrass was holopulped by using peracetic acid at 5 g loading per g biomass and the solution consistency was adjusted to 5% with DI water. Holopulping was conducted at room temperature for 24 h with stirring. The obtained holocellulose was washed excessively with DI water and air-dried at room temperature for 24 h. The dried holocellulose was treated with hydrochloric acid (2.5 M) for 2 h to remove hemicellulose. The isolated cellulose was collected by filtration, rinsed with DI water, and used to analyze cellulose crystallinity by solid-state NMR. The NMR samples were prepared by packing the moisturized cellulose into 4-mm cylindrical Zirconia MAS rotors. Cross polarization/magic angle spinning (CP/MAS) NMR analysis of cellulose was carried out on a Bruker Avance III 400-MHz spectrometer operating at 100.59 MHz for 13C in a Bruker double-resonance MAS probe head at spinning speeds of 8 kHz. The CP/MAS experiments utilized a 5 ms (90°) proton pulse, 1.5 ms contact pulse, 4 s recycle delay and 4000 scans. The cellulose crystallinity index was determined from the areas of the cellulose crystalline C4 signal (δ 86-92 ppm) over the entire C4 regions (δ 79-92 ppm) in the NMR spectra.